MSI Computer Corp�
901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
us�msi�com
iiiii
Upgrade and Warranty
Please note that certain components preinstalled in the computer may be upgradable or
replaceable by user’s request� To learn more about upgrade limitation, please refer to
the specications in the User’s Manual. For any further information about the computer
users purchased, please contact the local dealer� Do not attempt to upgrade or replace
any component of the computer if you are not an authorized dealer or service center,
since it may cause the warranty void� It is strongly recommended that you contact the
authorized dealer or service center for any upgrade or replace service�
Acquisition of Replaceable Parts
Please be noticed that the acquisition of replaceable parts (or compatible ones) of
the computer users purchased in certain countries or territories may be fullled by
the manufacturer within 5 years at most since the computer has been discontinued,
depending on the ocial regulations declared at the time. Please contact the
manufacturer via https://us�msi�com/support/ for the detailed information about the
acquisition of spare parts�
Technical Support
If a problem arises with your computer and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor�
Alternatively, please try the following help resources for further guidance� Visit the
MSI website for technical guide, BIOS updates, driver updates and other information
via https://us�msi�com/support/ or contact MSI technical support at 1-888-447-6564,
Monday to Friday from 5:00 a.m. to 4:00 p.m. Pacic Standard Time, for more help.
Safety Instructions
◙ Read the safety instructions carefully and thoroughly�◙ All cautions and warnings on the computer or user’s manual should be
noted�
◙ Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the computer
to the power outlet�
◙ If the power cord comes with a 3-pin plug, do not disable the protective earth
pin from the plug� The computer must be connected to an earthed mains
socket-outlet�
◙ Always unplug the AC power cord before installing any add-on card or
module to the computer�
◙ Always disconnect the AC power cord or switch the wall socket o if the
computer would be left unused for a certain time to achieve zero energy
consumption�
◙ Place the power cord in a way that people are unlikely to step on it� Do not
place anything on the power cord�
Preface
Please take special precautions if this computer comes with a battery�
◙ Danger of explosion if battery is incorrectly replaced� Replace only with the
same or equivalent type recommended by the manufacturer�
◙ Avoid disposal of a battery into re or a hot oven, or mechanically crushing
or cutting of a battery, which can result in an explosion�
◙ Avoid leaving a battery in an extremely high temperature or extremely low
air pressure environment that can result in an explosion or the leakage of
ammable liquid or gas.
◙ Do not ingest battery� If the coin/button cell battery is swallowed, it can
cause severe internal burns and can lead to death� Keep new and used
batteries away from children�
◙ To reduce the possibility of heat-related injuries or of overheating the
computer, do not place the computer on a soft, unsteady surface or obstruct
the computer air ventilators�
◙ Use this computer only on a hard, at and steady surface.
◙ Keep this computer away from humidity and high temperature�◙ Do not leave the computer in an unconditioned environment with a storage
temperature above 60OC or below 0OC, which may damage the computer�
◙ The maximum operating temperature is around 35
O
C�
viv
Never pour any liquid into the opening that could damage or cause electrical
shock�
Always keep the strong magnetic or electrical objects away from the computer�
If any of the following situations arises, get the computer checked by service
personnel:
◙ The power cord or plug is damaged�◙ Liquid has penetrated into the computer�◙ The computer has been exposed to moisture�◙ The computer does not work well or you can not get it work according to
user’s manual�
◙ The computer has dropped and damaged�◙ The computer has obvious sign of breakage�
Green Product Features
◙ Reduced energy consumption during use and stand-by◙ Limited use of substances harmful to the environment and health◙ Easily dismantled and recycled◙ Reduced use of natural resources by encouraging recycling◙ Extended product lifetime through easy upgrades◙ Reduced solid waste production through take-back policy
Environmental Policy
◙ The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life�
◙ Users should contact the local authorized point of collection for recycling
and disposing of their end-of-life products�
1
Overview
Congratulations on purchasing the Aegis ZS Gaming Desktop� This system is
your best PC choice� The feature packed platform also gives you an exciting
PC experience�
Packing Contents
Gaming Desktop
Keyboard
Power Cord
Mouse
User Guide
* Please contact us immediately if any of the items is damaged or missing�
* The illustrations are for reference only and your packing contents may slightly vary
depending on the model you purchased�
System Overview
h Top View
Overview
112233
Power Button
11
Press the Power button to turn the system on and o.
Reset Button
22
Press the Reset button to restart your PC�
Power LED
33
The LED power light that indicates when the computer is on, o, or in
Standby�
USB 3.2 Gen 1 Type C
44
USB 3�2 Gen 1, the SuperSpeed USB, delivers up to 5Gbps high-speed
data transfer for various devices, such as storage devices, hard drives,
video cameras, etc� The slim and sleek USB Type-C connector features
reversible plug orientation�
USB 3.2 Gen 1
55
USB 3�2 Gen 1, the SuperSpeed USB, delivers up to 5Gbps high-speed
data transfer for various devices, such as storage devices, hard drives,
video cameras, etc�
4488665577
1-31-2
Microphone Jack
66
This connector is provided for microphones�
Headphone Jack
77
This connector is provided for headphones or speakers�
MSI LED Button
88
Unlock all your RGB lighting eects.
h Rear View
11
22
33
44
55
1010
1111
1212
1313
66
99
88
77
1414
OFF
ON
Flash BIOS Button
11
For updating BIOS.
DisplayPort out
22
DisplayPort is a digital display interface standard� This connector is used
to connect a monitor with DisplayPort inputs�
33
HDMI-out
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
USB 2.0 Port
44
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
480Mbit/s (Hi-Speed) data transfer rate�
USB 3.2 Gen 1 Port
55
USB 3�2 Gen 1, the SuperSpeed USB, delivers up to 5Gbps high-speed
data transfer for various devices, such as storage devices, hard drives,
video cameras, etc�
Overview
1-51-4
WiFi antenna connector
66
For connecting external antennas.
Mic-In
77
This connector is provided for microphones�
Line-Out
88
This connector is provided for headphones or speakers�
Line In
99
This connector is provided for external audio output devices�
VGA Port
1010
The DB15-pin female port is provided for monitor�
USB 3.2 Gen 1 Port
1111
USB 3�2 Gen 1, the SuperSpeed USB, delivers up to 5Gbps high-speed
data transfer for various devices, such as storage devices, hard drives,
video cameras, etc�
PS/2 Combo Port
1212
PS/2 Combo Port is provided for keyboard or mouse�
2.5G LAN Port
1313
The standard RJ-45 LAN jack is provided for connection to the Local Area
Network (LAN)� You can connect a network cable to it�
Green/ OrangeYellow
LED Color LED StateCondition
1414
YellowOLAN link is not established�
GreenO10 Mbit/sec data rate is selected�
OrangeOn1000 Mbit/sec data rate is selected�
Power Jack
On (steady state) LAN link is established�
On (blinking)The computer is communicating with another computer on
On100 Mbit/sec data rate is selected�
the LAN�
Power supplied through this jack supplies power to your system�
NoticeNotice
High-speed devices are recommended for USB 3�2 ports whereas low-speed devices,
such as mouse or keyboard, are suggested to be plugged into the USB 2�0 ports�
Getting Started
2
Safety & Comfort Tips
Choosing a good workspace is important if you have to work with your PC for a long
period of time�
1� Your work area should have enough illumination�
2� Choose the proper desk and chair and adjust their height to t your posture when
operating�
3� When sitting on the chair, sit straight and keep a good posture� Adjust the chair’s
back (if available) to support your back comfortably�
4� Place you feet at and naturally on the oor, so that your knees and elbows have
the proper position (about 90-degree) when operating�
5� Put your hands on the desk naturally to support your wrists�
6� Avoid using your PC in a place where discomfort may occur (such as on the bed)�
7� The Personal Computer System is an electrical device� Please treat it with great
care to avoid personal injury�
Getting Started
Step 1
Remove the four thumbscrews on the tempered glass side panel. And gently
remove the tempered glass panel away from the case and place it in a safe area.
Carefully pull the foam packaging out the system. It should come out easily
Step 3
Make sure all components and cables are seated firmly. Now, you can replace
the tempered glass side panel and secure with thumbscrews.
Step 5
Screw the Wi-Fi Antennae to the gold contact points on the rear of the case.
Plug the mouse and the keyboard into any of the USB ports.
Plug the power cable into the power cable socket and plug the other end of
Hardware Setup
h Placing the System
If you have any further questions regarding your new computer, please do not hesitate
to contact us either through the online customer service site https://us�msi�com/support
or by contacting our customer support at 1-626-271-1004, Monday to Friday from 9:00
a.m. to 6:00 p.m. Pacic Standard Time. You can also contact technical support by
calling 1-888-447-6564, Monday to Friday from 5:00 a.m. to 4:00 a.m. Pacic Standard
Time� We will reply to you as soon as possible�
REMOVE THE TEMPERED GLASS SIDE PANEL
INSPECT YOUR PC
CONNECT WIFI ANTENNAE, KEYBOARD & MOUSE
Step 2 REMOVE THE FOAM PACKAGING
without having to apply any force.
Know Your Video Connectors
Step 4 CONNECT YOUR MONITOR
Connect your monitor to either display ports or HDMI ports on the graphics
cards.
Step 6 POWER ON YOUR DESKTOP
the power cable into a power outlet. Turn the power supply switch on by
having the “I” symbol on the switch pressed down. Press the power button.
2-32-2
USB Type-C
Mini DisplayPort
DVI
HDMI
DisplayPort
3
System Operations
This chapter provides you with essential information on system operations�
ImportantImportant
All information is subject to change without prior notice�
Power Management
Power management of personal computers (PCs) and monitors has the potential to
save signicant amounts of electricity as well as deliver environmental benets.
To be energy ecient, turn o your display or set your PC to sleep mode after a period
of user inactivity�
h Power Management in Windows 10
■ [Power Options] in Windows OS allow you to control the power management
features of your display, hard drive, and battery� Right-click [Start] , select
[Control Panel] from the list and then click [System and Security]�
Select [Power Options] and choose a power plan that suits your personal
needs. You may also ne-tune the settings by clicking [Change plan settings].
■ The Shut Down Computer menu presents the options of Sleep (S3/S4) & Shut
Down (S5) for rapid and easy management of your system power�
h Power Management through ENERGY STAR
qualied monitors
The power management feature allows the computer to initiate
a low-power or “Sleep” mode after a period of user inactivity�
When used with an external ENERGY STAR qualied monitor,
this feature also supports similar power management features of
the monitor� To take advantage of these potential energy savings,
the power management feature has been preset to behave in the
following ways when the system is operating on AC power:
■ Turn o the display after 10 minutes
■ Initiate Sleep after 30 minutes
System Operations
h Waking the System Up
The computer shall be able to wake up from power saving mode in response to a
command from any of the following:
■ the power button,
■ the network (Wake On LAN),
■ the mouse,
■ the keyboard�
Energy Saving Tips: Energy Saving Tips:
■ Turn o the monitor by pressing the monitor power button after a period of user
inactivity�
■ Tune the settings in Power Options under Windows OS to optimize your PC’s
power management�
■ Install power saving software to manage your PC’s energy consumption�
■ Always disconnect the AC power cord or switch the wall socket o if your PC
would be left unused for a certain time to achieve zero energy consumption�
3-33-2
Network Connection (Windows 10)
h Wired Network
1� Right-click [Start] and select [Network Connections] from the list�
2� Select [Ethernet] and then [Network and Sharing Center]�
3� Select [Set up a new connection or network]�
System Operations
4� Choose [Connect to the Internet] and click [Next]�
5� Select [Broadband (PPPoE)] to connect using DSL or cable that requires a user
name and password�
6� Type the information from your Internet Service Provider (ISP) and click [Connect]
to establish your LAN connection�
3-53-4
h Wireless Network
1� Go to [Start] , click [Settings] and select [Network and Internet]�
2� A list of available WLAN connections pops up� Choose a connection from the list�
3� To establish a new connection, select [Network and Sharing Center]�
4� Select [Set up a new connection or network]�
5� Followingly, choose [Manually connect to a wireless network] and click [Next] to
continue�
6� Enter information for the wireless network you intend to add and click [Next] to
proceed�
7� A new WLAN connection has been made�
System Operations
System Recovery (Windows 10)
The purposes for using the System Recovery Function may include:
■ Restore the system back to the initial status of original manufacturer’s default
settings�
■ When some errors have occurred to the operating system in use�
■ When the operating system is aected by virus and is not able to work normally.
■ When you want to install the OS with other built-in languages�
Before using the System Recovery Function, please back up the important data saved
on your system drive to other storage devices�
If the following solution fails to recover your system, please contact the authorized local
distributor or service center for further assistance�
3-73-6
Reset this PC
1� Go to [Start] , click [Settings] and select [Update and security]�
2� Select [Recovery] and click [Get started] under [Reset this PC] to start the system
recovery�
3� The [Choose an option] screen pops up. Choose between [Keep my les] and
[Remove everything]�
Reset this PC
Keep my les
Remove everything
Only the drive where
Windows is installed
All drives
Just remove my les
Remove les and clean the drive
Just remove my les
Remove les and clean the drive
System Operations
h Keep my les
1� Select [Keep my les].
2� The [Your apps will be removed] screen shows a list of apps that will need to be
reinstalled from the web or installation discs� Click [Next] to continue�
3-93-8
3� The next screen will show the changes to be made during the process� Click [Reset]
to start the system reset�
h Remove everything
1� Select [Remove everything]�
2� If you have multiple hard drives, a screen will pop up, asking you to choose between
[Only the drive where Windows is installed] and [All drives]�
3� Then select between [Just remove my les] and [Remove les and clean the drive].
4� The next screen will show the changes to be made during the process� Click [Reset]
to start the system reset�
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.