Mr Handsfree LED BEAT M300 User Manual

-1-

BLUETOOTH® SPEAKER

with dancing LED light

LED BEAT M300

USER’S MANUAL

DGB NL FR

-2-

DECLARATION OF CONFORMITY

We, the undersigned

Company: TE-GROUP nv
Address: Kapelsestraat 61, 2950 Kapellen - BELGIUM

declare, that the following equipment:

Product Name: MR HANDSFREE LEDBEAT M300
Product Type: Bluetooth® Stereo Speaker

is in compliance with the essential requirements and other relevant
provisions of Directives 1999/5/EC, 2004/108/EC, 2006/95/EC,
2011/65/EU. The product has been tested against the followings standards
and specifications applying versions valid on the date that it was issued:

EN 60950-1 · 2006 + A11:2009 + A1:2010 + A12:2011
ETSI EN 300 328 V1.8.1
ETSI EN 301 487-1 V1.9.2 (2011-09)
ETSI EN 301 487-17 V2.2.1 (2012-09)

Joseph van Oosterum, CEO TE Group NV, April 2016

------------------------LED Beat M300/04-16/V01-----------------------

Copyright © mr Handsfree

ILLUSTRATION

1

12

1110

9

8765

432

-3-

HOW TO USE THE MR HANDSFREE LEDBEAT M300?

The LEDBeat M300 can be used stand-alone, using the

rechargeable battery and can be controlled using the buttons on the
main unit.

The LEDBeat M300 is:

Bluetooth® Speaker
Music player with AUX / USB / TF input
FM-radio
Handsfree calling

PARTS & BUTTONS

1. - Short press: Search for radio stations in FM mode

- Short press: Play/Pause the music

- Short press: Answer/end call during handsfree calling

- Press 2x: Redial last number

- Long press: Turn ON/OFF LED lights

2. - Short press: Mode selection

3. - Short press: Go to previous track / FM station

- Long press: Decrease the volume

4. - Short press: Go to next track / FM station

- Long press: Increase the volume

5. Micro USB charging slot

6. ON/OFF switch

7. Micro SD/TF card input slot

8. USB input slot

9. AUX input port

10. Micro USB charging cable

11. AUX cable

12. LED indicator

CHARGING THE BATTERY

! The LEDBeat M300 must be fully charged before first use!

1. Plug the micro USB cable (10) into the micro USB charging socket
(5). Plug the other end of the USB cable (10) into your computer
or USB travel charger (not included, optionally available on

www.mrhandsfree.com). It is recommended to charge the speaker

when it is turned OFF, to maximize battery life.

2. The red LED indicator (12) at the back of the LEDBeat M300 will
light up and your device will start charging. When the battery is fully
charged, the LED indicator (12) will turn off.

3. When the battery capacity is low, you will hear a beep.

The LEDBeat M300 battery offers up to 6 hours wireless music time.
Music time may vary from usage (volume + LED lights ON/OFF).

TURNING ON / OFF

Turning ON: Slide the ON/OFF switch (6) to ON position.
Turning OFF: Slide the ON/OFF switch (6) to OFF position.

VOLUME

Long press I<< (3) to decrease the volume. Long press >>I (4) to increase the
volume. When minimum/maximum volume is reached, you will hear a beep.

MODE SELECTION

Press M (2) to switch between Bluetooth® and FM mode.
AUX mode is only available after connecting the AUX cable (11) to the
AUX input port (9).
USB mode and TF/SD card mode are activated automatically when
inserting a USB device or SD/TF card into the corresponding slot.

BLUETOOTH® MODE

A. PAIRING

1. Bluetooth® mode is activated automatically when turning ON the unit.
You will hear “Bluetooth® mode”.

2. Let your phone search for Bluetooth® devices. Select “MHF LEDBeat
M300” to pair both devices. You will hear a beep. You can now use you
LEDBeat M300 to listen to your favorite music wirelessly.

To ensure automatic reconnection between the phone and the LEDBeat
M300, we recommend setting the LEDBeat M300 as “Authorized” in the
Bluetooth® menu of your phone! Please refer to the manual of your
mobile phone for more detailed information.

GB

-4-

Note: After placing the LEDBeat M300 in a different location, it will need
to search for available FM stations again!

USB / MICRO SD/TF CARD MODE

1. Insert a USB device or SD/TF card into the corresponding slot at the
backside of the unit (7/8). You will hear “Music Play Mode”.

2. Your music will start to play automatically.

3. Short press I<< (3) or >>I (4) for previous/next track; short press >II
(1) for play or pause.

CUSTOMER SUPPORT

For more information, technical questions and return requests
concerning this product, you should contact [e-mail].

GUARANTEE

Mr Handsfree is a registered trademark of TE-Group NV. The mr
Handsfree brand stands for superior product quality and outstanding
customer service. That is why mr Handsfree warrants this product
against all defects in material and workmanship for a period of two (2)
years from the date of original purchase of the product. The conditions
of this guarantee and the extent of responsibility of mr Handsfree under
this guarantee can be downloaded from our website:

www.mrhandsfree.com.

If the Bluetooth® connection is not restored automatically after
disconnection, you can restore the connection manually in the menu of
your mobile phone.

B. STREAMING MUSIC
To control the music (play, pause, next track…) you can use:

• Buttons on your smartphone, tablet…

• Buttons on LEDBeat M300

C. HANDSFREE CALLING
When you receive an incoming call, you will hear “AUX mode” and the
phone number that is calling you. Press >II (1) to answer a call from your
mobile phone. Press >II (1) again to end the call.
Press >II (1) 2x to redial the last dialed number.

AUX MODE

1. Insert one end of the AUX cable (11) into the AUX input port (9) at the
backside of the unit.

2. Insert the other end of the cable into an external multimedia device
such as mobile phone, MP3 player, tablet, laptop… You will hear “AUX
mode” and the music will start playing.

FM RADIO MODE

1. Go to the FM Radio mode using the M-button (2). You will hear “FM
Mode”.

2. Short press >II (1) to search for available radio stations. The unit
will search all available radio stations and save them. Each time a
radio station is found, you will briefly hear the music, then the unit
continues its search for other stations. When the search is finished,
you will hear the first saved FM station.

3. Use I<< (3) and >>I (4) to go to the previous or next station.

4. To search more radio stations or improve the signal of the radio

stations, the LEDBeat M300 should be connected to the AUX cable,
which will work as an antenna.

5. After turning off the speaker or choosing a different mode, and then
turning on FM mode again, the last radio station that you listened to
will be playing (all other stations are still saved).