The mr Handsfree Blue Music is a Bluetooth® stereo headset, which can be used simultaneously with your Bluetooth® mobile phone and a Bluetooth® A2DP (stereo streaming) enabled audio device (f.e. PC, notebook, PDA, MP3
player, iPod, etc.). The Blue Music headset offers you digital stereo sound and a wireless operating range of up to
10 meters.
Audio devices should support stereo sound by Bluetooth
specially designed Bluetooth® adapter is required. For more information: www.mrhandsfree.com.
GETTING STARTED
®
A2DP profile. If your audio device is non-Bluetooth®, a
OVERVIEW
See illustration I
1. Pairing button / Music control wheel
2. Answer button / Play button
3. Indicator lights
4. Power switch
5. Volume control buttons
6. Microphone
7. Collapsible headband
8. Charging port
9. Power adapter
CHARGING THE BATTERY
The mr Handsfree Blue Music headset comes with a rechargeable battery included. For first time use, it takes about 4
hours to fully charge the battery. Afterwards, it takes about 2 hours to fully charge the battery. When the battery is fully
charged, the talk time/listening time is about 6,5 hours and the stand-by time will be about 230 hours.
Make sure that the headset is turned off. Plug the power adapter (9) into the headset charging port (8). Plug the
other end of the power adapter into an AC outlet. The red indicator (3) on the headset will light up. When the
battery is fully charged, the red indicator on the headset will turn off.
Note:
You cannot use the Blue Music headset while it is in charging mode.
TURNING THE HEADSET ON/OFF
Use the power switch (4) to turn the power on/off. When the headset is on, the blue indicator (3) is flashing slowly.
WEARING THE HEADSET
See illustration II
The Blue Music headset should be worn as shown in the illustration. The earpiece with the microphone should be
located on your right ear.
English
3
PAIRING
USE WITH MOBILE PHONE
PAIRING
You are required to pair the Blue Music headset with your mobile phone and/or your Bluetooth® enabled audio device
before using it.
Each Blue Music headset has a default PIN-code 1234 for pairing, which is stored in its internal memory. You are
usually required to enter the PIN-code 1234 in a pairing process with a Bluetooth
devices; however it depends on the kind of Bluetooth® device that the headset is connected to.
The Blue Music headset must be turned on before initiating pairing. Press and hold the pairing button (1) for 6
seconds until the blue and red indicators (3) of the headset are flashing alternately. The headset is now ready for
pairing. (If you are wearing the headset during the pairing process, you will hear a short tone when the headset is
ready for pairing.) Initiate the pairing process on your Bluetooth
device to pair with the Blue Music headset (Refer to the manual of your mobile phone/audio device). You will be
asked to enter the PIN-code to complete pairing. Enter 1234 and confirm it. When the pairing has been successful,
the red indicator of the headset will turn off and the blue indicator will flash slowly.
Note:
1. If the Blue Music headset is not in pairing mode, your mobile phone/audio device won’t find the headset. Please
set the headset into pairing mode before letting your mobile phone/audio device search for the headset.
2. If no pairing is possible for a period of time (approx. two minutes), you may need to start all over again.
3. Paired devices remain paired even when:
• One of the devices is not turned on.
• A service connection is interrupted or the service stopped.
• One or both devices are rebooted.
USE WITH MOBILE PHONE
The mr Handsfree Blue Music is compatible with most Bluetooth® mobile phones. Since Bluetooth® phones produced
by different manufacturers provide various functionalities, some functions described in this user’s manual could be
different or may not be available (Please refer to the manual of your mobile phone for more detailed information).
Once the Blue Music headset is successfully paired with your mobile phone, you can use it to make and receive calls.
®
mobile phone or your Bluetooth® enabled audio
®
mobile phone or other Bluetooth®
MAKING CALLS
Enter and dial the number on the mobile phone as you normally do. Once the call has been set up, the sound will
be transmitted to your headset automatically.
Note:
For some mobile phones, this will take up to 3 seconds.
REDIAL
Press and hold the Volume Down (Vol-) button (5) for 2 seconds to redial the last number you called.
ANSWERING / ENDING CALLS
When the Blue Music headset is turned on and there is an incoming call, you will hear a musical tone. Press the
answer button (2) to answer the call. The sound will be transmitted to your headset automatically. Press the Volume
control buttons (5) to adjust the volume. End the call by pressing the answer button (2).
English
4
USE WITH AUDIO DEVICE
USE WITH MOBILE PHONE AND AUDIO DEVICE AT THE SAME TIME
Note:
Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue Music headset is turned on. In that case, the headset won’t ring when there is an incoming call. Press and hold the answer button
(2) for 2 seconds to reconnect the headset with your mobile phone for an incoming call.
REJECTING CALLS
Press the Reject button on your mobile phone to reject an incoming call.
TRANSFERRING CALLS
Use the power switch (4) to turn the power of the headset off and transfer the call to the mobile phone while talking
on the headset.
USE WITH AUDIO DEVICE
The Blue Music headset can also be used with Bluetooth® A2DP enabled audio devices, such as your PC, notebook,
PDA, MP3 player, iPod, etc.
Once the Blue Music headset is successfully paired with your audio device, you can use it for listening to your favorite
music or for online chatting and gaming.
Audio devices should support stereo sound by Bluetooth
specially designed Bluetooth® adapter is required. For more information: www.mrhandsfree.com.
®
A2DP profile. If your audio device is non-Bluetooth®, a
USE WITH WINDOWS MEDIA PLAYER
Note:
Please refer to your PC software manual for more information or ask your local dealer for more information.
The Blue Music headset includes a special designed music control wheel (1) and a play button (2) that provide you
with an easy control to Windows Media Player.
• Play button: to play/pause the music
• Music control wheel:
: to stop the music
,: to skip forward
ဆဆ, : to skip back
Note:
The music control wheel is a special feature designed for Windows Media Player only. It does not apply to other audio
devices (f.e. MP3 player) since they do not support these functions.
USE WITH MOBILE PHONE AND AUDIO DEVICE AT THE SAME TIME
When the Blue Music headset is paired and connected with your mobile phone and your Bluetooth® enabled audio
device, you can use it with both devices simultaneously.
Note:
The use, operation and application of this function depend on the specific model of mobile phone that has
been paired with the Blue Music headset! Refer to the Bluetooth
phone.
English
®
chapter in the manual of your mobile
5
TROUBLESHOOTING
BLUETOOTH
®
MAKING CALLS WHILE LISTENING TO MUSIC
Enter and dial the number on the mobile phone as you normally do. Once the call has been set up, the headset
will automatically mute the music.
ANSWERING / ENDING CALLS WHILE LISTENING TO MUSIC
When the Blue Music headset is turned on and there is an incoming call, you will hear a musical tone. The headset
will automatically mute the music and the audio channel will be switched to your mobile phone. Press the answer
button (2) to answer the call. Press the Volume control buttons (5) to adjust the volume. End the call by pressing
the answer button (2). The audio channel will be switched back to the audio device and the music will start playing
again.
TROUBLESHOOTING
1. No indication of charging is
shown.
2. No sound contact between the
Blue Music headset and other
devices.
3. Several Bluetooth
appear on my mobile phone while
searching the Blue Music headset.
4. There is a disturbance noise
coming from the Blue Music
headset.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TE-Group
NV is under license. Other trademarks and trade names are those of their respective owners.
®
devices
For the headset battery that is empty, or has not been used for a long time,
it may take a couple of minutes for the headset indicator to show charging
status with a steady red light.
- Make sure that the two devices have been paired.
- Make sure that the headset is turned on.
- Make sure that the two devices are within a working range.
- Make sure that your mobile phone is within signal strength.
- Some Bluetooth
set. Disconnection may happen when there is more than one headset
paired with your mobile phone.
Most Bluetooth® enabled mobile phones with Bluetooth® function activated
can search for more than one Bluetooth® device within operative range.
The Blue Music headset will appear as “Blue Music” or “Unknown Device”
on your mobile phone after having been found by your mobile phone.
The performance of the headset will be affected by two factors:
- Whether your mobile phone is in a good signal area. If your mobile phone
is in a week signal area, you won’t hear clearly with the headset.
- Whether it is in the operative range.
BLUETOOTH
®
mobile phones can support only one Bluetooth® head-
®
English
6
GUARANTEE
GUARANTEE
Mr Handsfree is a registered trademark of TE-Group NV.
The mr Handsfree brand stands for superior product quality and outstanding customer service. That is why mr Handsfree warrants this
product against all defects in material and workmanship for a period of two (2) years from the date of original purchase of the product.
The conditions of this limited guarantee and the extent of responsibility of mr Handsfree under this limited guarantee are as follows:
• This guarantee is limited to the original purchaser of the product and is not transferable to any subsequent purchaser/end user.
• During the limited guarantee period, the sole responsibility of mr Handsfree will be limited to repair or replace, at its option, any
defective parts of the product if this is needed because of malfunction or failure under normal use and conditions. No charge shall
be made to the customer for parts and/or repair labor.
• The product must be shipped to an authorized service center in its original and complete packaging, with transportation charges
prepaid. Mr Handsfree will not assume responsibility for any losses or damages during transportation.
•To obtain repair or replacement within the terms of this guarantee, the customer must provide (a) a proof of purchase (e.g. dated bill
of sale); (b) a written specification of the defect(s); (c) a return address and phone number.
• This limited guarantee does not cover and is void with respect to the following:
(a) Products which have been subjected to improper installation, unauthorized repair, improper maintenance, unauthorized modi-
fications or other acts which are not the fault of mr Handsfree; (b) Products which have been subjected to misuse, abuse, neglect,
improper handling and storage, an accident or physical damage; (c) Products which have been subjected to fire, water, excessive
humidity, sand, dirt, extreme changes in temperature or other conditions which are beyond the control of mr Handsfree; (d) Products
which have been used with non-mr Handsfree approved accessories; (e) Products which have the serial number altered, defaced
or removed; (f) Products which have been opened, altered, repaired or modified by any unauthorized service center.
• Excluded from any guarantee are consumable items which may need replacing due to normal wear and tear, such as batteries,
headset ear cushions, decorative parts and other accessories.
• This limited guarantee gives you specific legal rights, and you may also have other rights which vary from country to country.