Mr. Coffee BVMC-FM1 Quick Start

IMPORTANT: Prior to first use, wash your café frappe blending

jar, lid and filter basket with a mild detergent
and rinse thoroughly.

It's Quick
&

Just add coffee and water.

Lift brew basket lid up and put a 4

1

cup paper filter into the brew basket
along with ground coffee/espresso.

Then add cold water into reservoir up to water level marking
(approx. 1/2 cup)

Now add ingredients to the

2

blending jar.

Remove the blending jar from its base and
add 2 cups of ice (Do not fill past max ice
line) and ingredients.

Secure the blending jar lid back on to
the jar by rotating into locked position.

Secure the blending jar back onto the
base by aligning the lock symbols on the
bottom of the pitcher and top of the base.

Easy!

chocolate
syrup

milk

Easy to use controls.

3

Make sure the appliance is plugged in. Now press the POWER
button. The red light will glow indicating that the appliance is
now ready to begin the 3 minute Frappe cycle.

Press the FRAPPE button to start the automatic cycle.

The green light will glow indicating that it is brewing. When brewing cycle
is complete - the green light will flash for 10 seconds in preparation for the
beginning of the blending cycle. When the automatic blending cycle is
complete, the green light will turn off.

NOTE: If additional blending is desired, press and hold the BLEND button
for the desired amount of time.

Instant Gratification!

Recipe:

Classic Mocha Frappe

Coffee and water In brewer:

3 tablespoons ground dark roast
coffee or espresso

1/2 cup water

Place ingredients in jar in this order:

2 cups ice cubes (14 to 17 each)
2 tablespoons sugar
3 tablespoons chocolate syrup
1/4 cup milk

Makes 1 large or 2 medium servings