MOVON MK50L Users Manual

ENCLOSURES

Input PIN Code

0000

1.

2. 3. 4.

5.

1. Carkit 2. Metal Clip 3. Car charger 4. Manual 5.Optional items[AC/DC adapter]

Product Components Hands-Free Unit

Speaker

Sliding Cover

Side Button

Volume Down Button

MIC

Charging port

Charging.Power.Bluetooth Status icon

Volume Up Button
Multifunction Button

Metal Clip

CHARGING

Before using the unit, charge the battery for at least 3 hours.
Charging the battery completely(and keeping it charged)
will help you get the longest possible talk and standby time
out of the battery. On average, the battery provides about 10
hours of talk time and about 330 hours of standby time.
Connect the adapter to the charging port on the side of the
unit and plug it into automobile(or any standard 12V~24V) power outlet.
When charging is completed, Charging status icon is turned o.

-1- -2-

[Note] Use only the power adapter supplied with the unit. Using any other adapter could damage
your unit, create a re hazard, or cause a risk of electric shock.

Low Battery Warning
When the battery require charging, the unit beeps every 20 seconds. The unit will
power o unless charged within approximately 10 minutes.

HOW TO USE

TURNING ON/OFF

TURNING ON : Please slide the cover up.
TURNING OFF : Please slide the cover down.

PAIRING TO YOUR BLUETOOTH PHONE

1. Please slide the cover up to turn on.

2. Press down the Multi-Function button[
Bluetooth status icon[

3. On your phone, start a search for Hands-free devices(This process
may take several seconds, and it will be dierent for each mobile
phone: see your phone’s owner’s manual for detailed instruction)

4. Your phone should discover a device. When your phone asks if you
want to pair with this device, answer Yes.

5. Enter PIN number “0000”. (4 zeros)
AUTOMATIC CONNECTION

This unit supports Auto-Connection which makes it possible to be automati
cally connected to the last connected device after turned on. To manually recon­nect, press Multi-function button[

EASY PAIRING: This unit goes into the Pairing Mode automatically when it is

turned on for the rst time.

SIMPLE PAIRING: You can pair this unit with your mobile phone without enter-

] will ash constantly.

] for 3 seconds until the

] shortly.

Active Dev List
Model Name
MK50

4.reference

Input PIN Code

0000

5.reference

ing the pin number(0000), if your mobile phone supports Bluetooth version 2.1.

MAKING A CALL

EnglishEnglish

1. Last call-Redialing
Press the Multi-Function button[ ].

2. Voice Dialing
Press the Multi-Function button[ ] for 2 seconds.
Voice Dialing is activated on the phone. If you want to cancel Voice Dialing,
press the Multi-Function button[

[Note] Please make sure that your phone supports the Voice Recognition rst(See your phone’s
owner’s manual for detailed instructions)

] during the Voice Dial Mode.

RECEIVING A CALL

You can hear the ring tones from the unit when incoming call. Press the Multi­Function button[

] to receive call.

REJECTING A CALL

Press the Multi-Function button[

] for 2 seconds.

ENDING A CALL

Press the Multi-Function button[
on the phone.

] during the call or just press the “End” button

TRANSFERRING A CALL

To transfer a call from the unit to your mobile phone and vice versa, press the
Multi-Function button[

] on the Hands-Free Unit during the call for 2 seconds.

ADJUSTING A VOLUME

You can adjust the Volume by pressing the Volume Up(+) or Down(-) button.

MIKE MUTE

If you press the Side Button, the microphone is muted. You can hear a beep every
10 seconds during the mute mode.

[Note] The Mike Mute mode can be deactivated by pressing the Side button shortly.

-3- -4-

English English

CALL WAITING

To use this feature, you must subscribe to Call Waiting through your service
provider, and your phone must support the hands-free prole. When another call
comes in while you are talking on the phone, this unit sounds a tone.

1. To put your current call on hold and switch to the waiting call, press and hold

Volume Up(+) for about 3 seconds When you release the button, you’ll be
connected to the waiting call. When you want to switch back to the current
call, press and hold volume up again for 3 seconds.

2. To hang up your current call and switch to the waiting call, press and hold

Volume Down(-) for about 2 seconds When you release the button, you’ll be
connected to the waiting call.

[Recommended] Press the “SEND” button of your mobile phone to activate the Call Waiting function.
[Note] Some features may not be compatible with certain mobile phones.

RESETTING THE HANDS-FREE

If you are having some trouble with this unit or you want to delete all your
information(paired device information, etc.), you can reset it. Press and hold
Volume Up(+) and Volume Down(-) for about 3 seconds.

[Note] Resetting is only possible when standby mode after disconnecting with your mobile

phones.

MULTIPOINT

The unit supports simultaneous connection with 2 mobile phones with full
control of each unit.

[Note] This feature may not be compatible with certain mobile phones.

1. Multi-point Connect

Set the unit into the pairing mode rst, and search the unit individually from

2 mobile phones.

Make sure one mobile phone is connected properly to the unit before trying

the other one.

2. Making a call [To use the second mobile phone]

Press the Side button for last call-redialing from the second mobile phone.

Press the Side button for 2 seconds until you hear a beep sound. Voice Dialing

is activated on the second phone.

[Note] Making a call (To use the rst mobile phone) follow the same instruction as section 3
described already.

3. Receiving a call
You can hear the ring tones from the unit when incoming call. Press the Multi­Function button to receive call.

[Note] Each mobile phone plays dierent ring tones. The primary phone without a call in
progress is disconnected automatically, when the secondary phone is receiving a call.
After the end of call in the secondary phone, the primary phone automatically will be
connected with the car-kit and vice versa.

STATUS INDICATION

1. Icon Indication

Status Icon Indication
Power On Bluetooth Status Icon blinks 3 times
Pairing Mode Bluetooth Status Icon blinks repeatedly
Connectable Mode Bluetooth Status Icon blinks 1 time every 5 seconds
Connected Mode Bluetooth status Icon blinks 2 times every 5 seconds
While Calling Bluetooth Status Icon blinks 3 times every 5 seconds

2. Beep Sound Indication

Status Beep Indication
Power On Turn-on Melody
When connected 2 short beeps
Incoming Call Melody
Active call 2 Rising Beeps
Ending Call 2 Falling Beeps
Low Battery 2 short Beeps

Specications

-5- -6-

English English

Model Name MK50
Bluetooth Core Spec Bluetooth Specication V2.1+EDR
Prole Headset,Hands-free
Carrier Frequency 2402 MHz to 2480 MHz
Audio Output 1 W(8Ω)
Modulation Method GFSK, 1Mbps, 0.5BT Gaussian
Maximum Data Rate Asynchronous: 2178.1kbps / 177.1kbps

Bluetooth Class Class 2
Hopping 1600hops / sec, 1MHz Channel Space
Transmit Power 1 dBm
Coverage Range 10 Meters
Receiver Sensitivity -80 dBm / 0.1% BER
Continuous Talk Time 10 Hours
Stand-by Time 330 Hours
Weight 65g
Dimension 51.2(W) X 15.7(L) X 112.9(H)mm
Charging Voltage DC5.0V
Charging Time MAX 3 Hours
Operating Temperature -20° to +70°C
Storage Temperature -40° to +85°C
Battery Lithium Polymer 3.7V 600mAH

SAFETY AND GENERAL INFORMATION

1. Please read this guidebook carefully and follow the instruction.

2. To avoid any damage or malfunction of the unit, do not drop it from high place.

3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid
directly, then do not operate it normally to avoid any electrical shock, explosion and damage of the unit.

4. Do not place or keep the unit near the heat sources such as direct sun light, radiators, stoves or other
apparatus which produce heat. It may cause explosion, degrade of performance and reduce
battery life.

5. Do not modify, repair & disassemble unit at discretion

6. Do not place the heavy objects on the unit.

7. Use only supplied and approved charger.

8. Replacement or service must be done at a qualied service center or manufacturer.

9. Unplug this unit when unused for long period of time or during lightening storms.

Synchronous: 1306.9kbps / 1306.9kbps

(especially battery: it may cause an explosion)

[CAUTIONS] ELECTRIC SHOCK HAZARD

The battery used in this device may present a risk of re or chemical burn if mis-treated.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received , including interference that may cause undesired operation.

[Note] The manufacturer is not responsible for AzNY interference, for example RADIO or TV interference,
caused by unauthorized modications to this equipment. Such modications could void the
user’s authority to operate the equipment.

EU

This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by MOVON Corporation,
declares that this product is in compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product
is intended to be used in Austria, Belgium, Denmark, Finland, France,Germany, Greece, Ireland, Italy, Luxembourg, The
Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Bluetooth is
a trademark owned by the Bluetooth SIG, Inc.

WARRANTY

The condition of this warranty and our responsibilities under this warranty are as follows:
Supplier’s warranty is non-transferable. And this warranty is limited to the original purchaser only.

- You must be able to prove the date of original purchase of the unit with a dated receipt.

- The warranty is not applicable if the product has been subject to physical abuse, improper installation, modication or

repair by unauthorized third party.

- The responsibility of supplier’s products shall be limited to the repair or replacement of the product at it’s sole discretion.

- Specically exempt from any warranty are limited-life consumable components subject to normal wear and tear such as

batteries, decorates and other accessories.

- A supplier will not take any responsibility if the failure of the unit has resulted from accident, abuse, misuse or any

unauthorized repair, modication or disassemble.

- Modication and repair of the unit should be done by authorized and qualied service personnel, center or returned to

the manufacturer.

- This warranty gives you specic legal rights and you may also have other rights which vary under local laws.

WEEE SYMBOL INFORMATION

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown
on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its
working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product or their local government oce, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.

[IMPORTANT NOTE] To comply with RF exposure requirements, this device may not be co-located

Correct Disposal of This Product

-7-

English

GEHÄUSE

1.

2. 3. 4.

1. Fahrzeug-Kit 2. Metallklammer (diese Klammer spielt eine Rolle bei der
Anbringung der Antenne für den FM-Transmitter) 3. Fahrzeugladegerät 4. Handbuch

5.Optionales Zubehör: Wechsel-/Gleichstromadapter

5.

Produktkomponenten Freisprecheinheit

Lautsprecher

Schiebeabdeckung

Seitliche Taste

Leiser-Taste

Mikrofon

Ladeanschluss und
Kopfhöreranschluss

Anzeige für den Ladestatus
Anzeige für den Bluetooth-Status

Lauter-Taste
Multifunktionstaste

Klemme

LADEN

Laden Sie den Akku vor der Inbetriebnahme der Einheit für mind­estens drei Stunden. Ein vollständiges Laden des Akkus (und eine
Aufrechterhaltung der Ladung) unterstützt eine möglichst lange
Gesprächs- und Standby-Zeit. Durchschnittlich erreicht der Akku
eine Gesprächszeit von zehn Stunden und eine Standby-Zeit von
680 Stunden. Schließen Sie den Adapter seitlich an der Einheit an
den Ladeanschluss an und verbinden Sie den Adapter mit der Fahrzeugsteckdose (oder
einer Standardspannungsquelle 12 V~24 V). Nach abgeschlossenem Ladevorgang

-8-

Germany