BluePin II
Instruction Manual
i120
Please read this manual carefully before operating and save it for
Have a question? Please visit http://www.i-Luv.com
future reference.
BluePin II V10M10_IM_EN_10302007
- 1 -
www.i-Luv.com
BluePin II V10M10_IM_EN_10302007
USER SAFETY GUIDE
INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the
end of its life cycle; bring it to a collection point for the recycling of
electrical and electronic appliances. This symbol on the
product means the instructions for use or the
packaging will inform about the methods of disposal.
The materials are recyclable as mentioned in its
marking. By recycling, material recycling, and other
forms of re-utilization of old appliances, you make an important
contribution to the protection of the environment. Please inquire at your
local community administration for an authorized disposal location.
Important Safety Instructions
1. Read instructions – All safety and operating instructions should
be read before the appliance is operated.
2. Retain instructions – The safety and operating instructions
should be retained in a secure place for future reference.
3. Heed warnings – All warnings on the appliance and in the
operating instructions should be observed.
4. Follow instructions – All operating and use instructions should be
followed.
5. Water and moisture – The appliance should not be used near
water (bathtub, kitchen sink, laundry tub, pool, etc.).
6. Heat – The appliance should be situated away from heat
USER SAFETY GUIDE
- 2 -
www.i-Luv.com
BluePin II V10M10_IM_EN_10302007
Important Safety Instructions-Continued
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
7. Power sources – The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
8. Cleaning – The appliance should be cleaned with a dry cloth.
9. Objects and liquids entry – Care should be taken so that objects
do not fall and liquids are not spilled into the device’s openings.
10. Servicing – The user should not attempt to service the appliance
beyond that described in the user's operating instructions. All other
servicing should be referred to qualified service professional.
FCC Notice (USA)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Refer to 47 CFR Sec. 15.19.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio
USER SAFETY GUIDE
FCC Notice (USA)-Continued
- 3 -
www.i-Luv.com
BluePin II V10M10_IM_EN_10302007
communications, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment. Refer to 47 CFR Sec. 15.21.
Industry Canada Notice to Canadian Users
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation of the device. Refer to IC RSS 210 Sec. 5.11. The term “IC”
before the certification or registration number only means that the
registration was performed based on a Declaration of Conformity and
that Industry Canada technical specifications were met. It does not
imply that Industry Canada (IC) approved this equipment. Refer to
Self-Marking 6(f) and RSP 100 Sec. 4.
USER SAFETY GUIDE
Additional Safety Instructions
• When not in use, keep your device in a safe place where it will not
be bent or crushed.
- 4 -
www.i-Luv.com