Mountain Off Road YJST User Manual

MOUNTAIN OFF ROAD ENTERPRISES, LLC. P.O. BOX 690 DELTA COLORADO 81416

(877)JEEP-A2Z or (877)533-7229

(888)698-5337 FAX

E-mail: info@mountainoffroad.com

www.mountainoffroad.com

INSTALLATION INSTRUCTIONS for YJST

HARDWARE KIT:

1– Step Assembly 2– Backing Plate

4– 5/16 Nuts 4– 5/16 x 1” Bolts 4– 5/16 Flat Washers 2– 5/16” pins

Please read and understand all instructions before beginning the installation of the Hide-AStep. Please read the terms and policies on the back of these instructions.

This step mechanism uses a very strong spring. Extra care should be used during installation and use to prevent injury to fingers and hands!

The YJST is designed to fit the following Jeep® vehicles: 1987-1995 YJ Wranglers. The step may interfere with factory installed or aftermarket steps or rocker guards. The step is designed to be quick detachable by removing two pins. STEP 1: Locate the step in the desired position. STEP 2: Remove the two quick disconnect pins. STEP 3: Drill four 5/16” holes up through the floor using mounting plate as a pattern. STEP 4: Install the bolts with nuts and washers through the backing plates and mounting plate. STEW 5: Reinstall the two removable pins

The step has raised dimples to provide traction but care should be taken during use to prevent slipping. Mud, ice, and snow will make the step more slick. You are now done so GO JEEPIN!

TERMS-POLICIES:

FIT and TOLERANCES: M.O.R.E.™ parts are the results of countless hours of research, testing, fitting and refining. Jeep® frames have a wide tolerance on bolt hole centers from frame to frame. This is why M.O.R.E.™ has installed “slots” in which to mount them. In addition to the factory tolerances, most people install other then factory equipment such as suspension lift kits, skid plates, different transfer cases etc. M.O.R.E.™ has done the best job we can to insure that our parts fit with all of the possibilities. However, you may find it necessary to grind, elongate, bend, or force these parts to fit on your rig. Please use common sense when installing these parts and let us know how we can improve them.

DAMAGE CLAIMS: All orders are carefully packed, however, mishandling by the carrier can result in damage. The carrier has the responsibility for the shipment from the time it leaves our warehouse until it is delivered to you. All claims for lost or damaged goods should be reported to the carrier, not to M.O.R.E.™ LLC.

RETURNS: No returns will be accepted without prior permission from M.O.R.E.™ LLC. After you receive a Return Goods Au- thorization (RGA) number, merchandise must be returned prepaid and insured. A claim must be made with in 30 days from receipt of merchandise. The original invoice or a copy with the RGA number written on must accompany all returns. A 20% restocking fee will be charged on all parts returned for credit or refund unless merchandise is proven to be defective or was shipped wrong by M.O.R.E.™ LLC. No merchandise will be issued credit or refund if it has been installed, modified, used in any way or is in unsalable condition.

WARRANTY: All merchandise is warranted to be free from defects in materials and workmanship prior to installation. Any alteration or improper use will void this warranty. Because all parts we sell are intended for use in heavy-duty applications it is not possible to warrantee or guarantee the performance of any items. M.O.R.E.™ LLC. products and the products manufactured by others, which we sell may be subject to an infinite variety of conditions due to the manner in which they are used, serviced and/or installed. Purchasers and users of such products rely upon their own judgment as to the suitable use selection, service and installation of such products.

PRODUCT DISCLAIMER: Modification of your vehicle to enhance performance with parts sold by M.O.R.E.™ LLC. may cre- ate a dangerous condition which could cause serious bodily injury, and the buyer hereby expressly assumes all risks associated with any such modifications. All parts sold by M.O.R.E.™ LLC. are for racing or off road use only. Mountain Off Road Enterprises LLC. will not accept responsibility for personal injury or property damage arising from the failure of any parts manufactured or sold by M.O.R.E.™ LLC.

Specifications are subject to change without notice.

Jeep®, AMC®, CJ®, YJ®, TJ®, LJ®, JK®, Wrangler®, are registered trademarks of DaimlerChrysler. M.O.R.E.™ is not

affiliated with DaimlerChrysler.