Mountain Off Road TB500 User Manual

MOUNTAIN OFF ROAD ENTERPRISES, LLC.

P O BOX 690, DELTA, CO 81416

970-625-0500 970-625-3747 Fax

E-mail: [e-mail]

www.mountainoffroad.com

INSTALLATION INSTRUCTIONS FOR:TB500

PLEASE READ AND UNDERSTAND TERMS / POLICIES BEFORE PROCEEDING

(1) When mounting rear traction bar ,exhaust
may need to be redone for clearance.
(2) Traction bar needs to be mounted as close
to the center of differential as possible.
(3) Shackle at forward end of traction bar must
be at 90 degrees to centerline of traction bar.
(4) This traction bar is universal and will re­quire fabricating !

CONTENTS OF KIT:

The TB500 Traction bar is designed to fit the 76-86 CJ-7 and 87-95 YJ. This
will require a fair amount of custom fab work to hang the shackle hanger.
You may also need to enlarge the radius on the axle mounting brackets to ac­commodate larger tube diameters. If you mount to your existing skid plate we
recommend that you Beef up the mounting area. It is important to get the
shackle mounted as close to the 90 degree angle as shown below. Pictures on
2nd page give you an idea of how it should be mounted.

90 Degrees

PAGE 1 of 2

TERMS / POLICIES:

FIT and TOLERANCES: All parts in M.O.R.E.™ products are the results of countless hours of re-

search, testing, fitting and refining. Jeeps have a large tolerances from vehicle to vehicle. In addition to
the factory tolerances, most people install other then factory equipment (aftermarket add-ons).

M.O.R.E.™ has done the best job we can to insure that our parts fit with some of the possibilities. How-

ever, you may find it necessary to grind, elongate, bend, or force the parts you buy to fit on your rig. Be
sure that you want to install them before you modify them. Please use common sense when installing
these parts and let us know how we can improve them.

DAMAGE CLAIMS: All orders are carefully packed, however, mishandling by the carrier can result in

damage. The carrier has the responsibility for the shipment from the time it leaves our warehouse until it
is delivered to you. All claims for lost or damaged goods should be reported to the carrier, not to
M.O.R.E.™ LLC.

RETURNS: No returns will be accepted without prior permission from M.O.R.E.™ LLC. After you re-

ceive a Return Goods Authorization (RGA) number, merchandise must be returned prepaid and insured.
A claim must be made with in 30 days from receipt of merchandise. The original invoice or a copy with
the RGA number written on must accompany all returns. A 20% restocking fee will be charged on all
parts returned for credit or refund unless merchandise is proven to be defective or was shipped wrong by
M.O.R.E.™ LLC. No merchandise will be issued credit or refund if it has been installed, modified, used
in any way or is in unsalable condition.

WARRANTY: All merchandise is warranted to be free from defects in materials and workmanship prior

to installation. Any alteration or improper use will void this warranty. Because all parts we sell are in­tended for use in heavy-duty applications it is not possible to warrantee or guarantee the performance of
any items. M.O.R.E.™ LLC. products and the products manufactured by others, which we sell may be
subject to an infinite variety of conditions due to the manner in which they are used, serviced and/or in­stalled. Purchasers and users of such products rely upon their own judgment as to the suitable use se-

lection, service and installation of such products.

PRODUCT DISCLAIMER: Modification of your vehicle to enhance performance with parts sold by

M.O.R.E.™ Inc. may create a dangerous condition which could cause serious bodily injury, and the
buyer hereby expressly assumes all risks associated with any such modifications. All parts sold by
M.O.R.E.™ LLC. are for racing or off road use only. Mountain Off Road Enterprises LLC. will not accept
responsibility for personal injury or property damage arising from the failure of any parts manufactured or
sold by M.O.R.E.™ LLC.

Specifications are subject to change without notice.

PAGE 2 of 2