Motorola VerveCam+ operation manual

VERVE

CAM

VERVE

CAM+

User Guide

We aim to provide you with the best user experience. Please check out the latest software and user manual update from our website: www.verve.life

1. Here’s what you can do

The MOTOROLA VerveCam Ultra Portable Lifestyle Video Camera is packed with the following features:

• Video recording in 2.5K at 30 fps and 135° field of view

• Share videos in real time via Youtube live stream

• Free

• Loop Recording within a set time frame

• Capture your favorite sequence over a set

• Take it 25m deep with included IP68 water

Hubble Connect for VerveCam app with

photo/video editing and social sharing

period of time

proof sports case

1 Here’s what you can do

2. Box Contents

Ver ve Cam

•1 x Camera

• 1 x Micro USB cable

• 1 x Quick Start Guide

Ver ve Cam+

•1 x Camera

• 1 x Micro USB cable

• 1 x Quick Start Guide

•1 x Waterproof Case

•1 x Clip Mount

• 1 x Bumper & Lanyard

• 1 x Universal Tripod Mount

Additional accessories for other home or outdoor activities can be purchased separately from www.verve.life

Box Contents 2

3. Your Camera at a Glance

1. LED Indicator - Blue / Red

2. Microphone

3. Camera Lens

4. Speaker

5. micro SD Card* Slot and Reset Button (microSD

Card is not included.)

6. Power / Mode Button

7. Mode Indicators - White (Photo / Video /

Streaming)

8. Shutter / Select Button

9. Lanyard Hole

10. Locking Holes

11. micro-USB socket

* supports microSD cards up to 32GB.

3 Your Camera at a Glance

4. Safety Instructions

WARNING

The Camera is compliant with all relevant electromagnetic field standards and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the product.

• Avoid letting the USB port come into contact with liquid substances such as liquid soap or detergent.

• Do not immerse the Camera in water without its waterproof case.

• Do not jump into water with the Camera or subject it to high water pressure conditions such as rapids or waterfalls, as this may affect its waterproof performance.

• Keep the Camera away from excessive dust, smoke, steam and sand.

• Do not charge the Camera when it is wet.

• Do not open the microSD slot cover underwater.

• Do not insert a wet microSD card into the Camera.

• Do not drop or use excessive force when handling the Camera as this may cause damage to the camera.

• Only use a power adapter with the suggested rating of 5V 1A.

• Never use extension cords with power adapters.

• Do not touch the plug contacts with sharp or metal objects.

• Keep this User's Guide for future reference.

Safety Instructions 4

5. Charge the Battery

Battery life is about

1.5 hours when not connected to Wi-Fi, and 1 hour when connected to Wi-Fi.

Connect the power adapter to an electrical outlet and insert the plug into the micro-USB socket on the underside of the Camera. Only use the power adapter (5V 1A) with the micro-USB plug.

Note: If the Camera is OFF, the LED indicator lights up in red when charging and goes off when the battery is fully charged. It takes about 6 hours to fully charge the battery for the first time. You can continue to take photos or record videos when the Camera is charging. The Camera will issue a voice prompt to warn you that it is powering off when battery is low.

5.1 Check Battery Status

You can check the battery status of the Camera from Hubble Connect for VerveCam app. The battery status icon is shown on the top right corner of the Viewfinder screen.

5 Charge the Battery

6. Power On & Off the Camera

To p ow er ON th e C am e ra, hold down the POWER / MODE button

lights up in blue. To power OFF the Camera, hold down the POWER

/ MODE button voice prompt indicating that the Camera is powering off before the LED indicator goes off.

0 for 3 seconds. The LED indicator

0 for 3 seconds. You will hear a

Power On & Off the Camera 6

7. Standby Mode

When the Camera is not connected to the power supply or not connected to Hubble Connect for Ver veC am app for more than 3 minutes, it will enter standby mode. The LED indicator flashes in blue once every 3 seconds. Press any button on the Camera to exit standby mode.

7 Standby Mode

8. Connecting Devices

System Requirements:

Smartphone: iOS 8.3 (or higher) or Android™ 4.3 (or higher)

Not supported on iPad and Android tablets.

Wi-Fi® requirements:

At least 2Mbps upload bandwidth per camera. Test your Internet speed at: http://www.speedtest.net/

1. Download & Install Hubble Connect for Verve-

Cam app on your smartphone for free at the

App Store

2. Open the App.

3. Follow the in-app instructions to connect the

Camera with your smartphone.

4. The Camera ID is printed on the back of the

Camera. YOUR CAMERA’S DEFAULT PASSWORD IS “00000000”.

5. When connected, you will see the home

screen.

Tap to enter Viewfinder screen where you can take photos, record videos, record timelapse video, do loop recording or stream live video.

Tap to enter the Camera roll, where you can view, download, edit, share or delete photos

and videos.

To return to the home screen from any mode, tap < on the top left of the screen.

or Google PlayTM.

Connecting Devices 8

9. Insert microSD Card (not included)

Remove waterproof cover

Your Camera supports microSD cards with storage capacities of up to 32GB.

1. Remove the waterproof cover, then insert a microSD card with the gold-plated side facing down into the card slot.

2. To remove the microSD card, push the card in to eject it.

Note:

The Camera will stop recording automatically and issue a voice prompt to warn you when the memory card is full. The memory available will be displayed on the top right corner of the Viewfinder screen.

9 Insert microSD Card (not included)

10. Transfer files from the Camera to your Computer

Power on the Camera and make sure that the Camera is disconnected from Hubble Connect for Ver ve Ca m App. To disconnect the Camera from the App, you can close the App or turn off the Camera and turn it on again. Connect the Camera to your computer’s USB port. Your computer will recognize the Camera as a mass storage device. You can then drag and drop your files, just like other external devices. To exit mass storage mode, unplug the USB cable.

Transfer files from the Camera to your Computer 10

11. Basic Operation of your Camera

11.1 Take a picture using the Camera

1. Hold down the POWER / MODE button 0 for

3 seconds to power ON the Camera. The LED indicator lights up in blue.

2. Press the POWER / MODE button 0 to switch

to photo mode. Photo mode indicator lights up in white.

3. Press the SHUTTER/SELECT button to take

photo. You will hear a shutter sound and the blue LED indicator flashes once.

Note:

Photos will be stored on the Camera’s memory card. You can also choose to save the photos to your smartphone automatically. See “General Settings” on page 25 to turn autosave to phone memory On or Off. The Camera will issue a voice prompt to warn you when the memory card is full. Whether you are taking a photo in bright sunlight or a dimly lit room, you can change Camera settings by selecting a specific mode via Hubble Connect for VerveCam app. (see page 13)

11 Basic Operation of your Camera

+ 27 hidden pages