Motorola V2088 User Manual

Download

aOnly

Dummy matter

Antenna

Service Indicator

Handset adaptor

Volume keys

Smart Button

Voicemail key

Speaker ports

Release button (faceplate)

Lens

Quick

Access

Key

Keypad

ON/OFF key

Quick Reference

Charger/Accessory

socket

Options Menu

Quick Reference

Special Keys

S O Press to accept call, setting, option,... C Press to reject call, setting, option,... E Press to enter the Quick Access features. $ Press to access the options or phone book menus. <> Press both simultaneously to lock the keypad on flipless models; also use to

ª Press the top to scroll up and press the bottom to scroll down. f Press to call Voicemail.

Making a Call

Enter CO.

Receiving a Call

Press O or open the flip (only on models with flip when the ‘Key Answer Only’ feature is set to Off).

Ending a Call

Press O, C or close the flip (models with flip only).

Making an Emergency Call

Enter 112O. The call will be directed to a central emergency operator.

Quick Access Features

Press E followed by the appropriate key, or press E, scroll to the feature and press

O to select.

Adjust Ringer Volume

Press E followed by the volume button to either increase or decrease the ringer volume.

Redialling the Last Number Called

Press O to display the last number dialled.

2 Press O to call the number.

One-Touch Dialling

Press and hold the appropriate digit key 1 to 9.

Storing Numbers in the Phone Book

Press E2 to store a number on the SIM card.

Recalling a Number from the Phone Book

Press the Smart button (=) and then use the volume button to scroll to the stored number,

Quick Reference

or press the appropriate digit key to skip to a particular letter. To make the call, either hold down

Dialling Phone Book Numbers

Enter G>O

Stopping a Call Alert

Press the volume button when the phone is ringing or vibrating. This will stop the alert but not answer the call.

Press to turn phone on and off.

scroll left and right.

= for 1.5 seconds or press O.

Customising the Quick Access Menu

You can change the features in the Quick Access menu to suit your personal preferences.

To customise the menu, you can use either the Quick Access Setup menu or you can do the following:

1 Press E and scroll to the menu item you

wish to change.

2 Press and hold O to access the list of

features available. The currently selected feature will be displayed.

3 Scroll through the list until you find the

feature you wish to store in the Quick Access menu; press O.

4 Completed will be displayed to confirm

that the feature has been stored.

The following items are in the Quick Access list:

• Find by Name

• Find by Location

• Add Entry to Phone

• Add Entry to SIM

• Call Voicemail

• Battery Meter

• Phone Lock Now

• Phone Mute On or Off

• Ring Volume

• VibraCall On or Off

• Switch Memory

• Read Messages

• Outgoing Messages

* Availability depends on the type and settings of the SIM card, and/or your

subscription of this feature.

• Message Editor

• Last Calls Received

• Last Call Charge

• Last Call Timer

• Switch Line 1/2*

• Show Service*

• Restrict My ID

• Divert Voice Call

• Show Time and Date

• Credit Remaining

• Find New Network

• Adjust Contrast

• Change Band

Standard setting for

Quick Access

‡

Quick Reference

Introduction

Welcome

Congratulations on your purchase of a mobile phone from Motorola, the world leader in cellular technology. The phones are packed with features that put you in control and give you unrivalled power, whilst remaining discrete.

Control

• Customisable Quick Access Menu E -

Place nine of your most frequently used features in your own personal menu so that they can be accessed with just two key presses. Icons make each feature easy to identify.

Power

• Superb battery performance G - Each

phone is capable of several hours conversation or several days standby, but is still small and light.

! Before you use your phone, please

see the ‘Your Battery’ section for important information on charging a new battery.

Personality™

This cellular telephone incorporates

Personality™. Unique to Motorola, Personality™ removes the complexity of

cellular communications by guiding you through the features and presenting you with simple choices every step of the way.

Personality™ also allows you to personalise

the way you use your phone - for example, different ringer tones, a phone book and network selection preferences - all presented with clarity and simplicity. In this manual, each of the identified with an it is customisable to meet your requirements.

Personality™ features is

j symbol to indicate that

Discretion

• VibraCall™ L - In locations where you

don’t want your phone to ring, or which are too noisy to hear your phone ring, your phone can vibrate to alert you of a call.

• Stop Call Alert - Press the volume button when the phone is ringing or vibrating. This will stop the alert but not answer the call.

Key Features

1 Dual band. 2 11 alert tones, vibracall, vibrate ring,

silent.

3 Stop Call Alert by pressing volume

button.

4 3 changable backlight colors. 5 Phone book - 100 locations on phone. 6 Tag different backlight colors to

selected entries and use as a form of caller ID.

7 User customizable Quick Access Menu. 8 Smart button for quick access to

phonebook entries.

9 9.6 kbps data with CELLect

CELLect



3 PC card.



1+ or

Introduction 1

Understanding this Manual

Many of your phone options are accessed by a simple menu system. A full description of the menus and how to move around them is covered in the next section When the manual describes the use of each menu item, it will be assumed that you are familiar with the menu system.

Key Presses

Key presses are represented in this manual using symbols so that you may locate and use the required sequence quickly. A sequence of key presses may be shown as follows:

$OC

This means that you should press the $ key followed by the O key and then the C key, in sequence, not simultaneously.

Entering Information

When you are requested to enter information, such as the number of the phone you wish to call, this is represented in bold type. For example:

C - enter the required telephone number. A - enter your Personal Identification Number. B - enter your unlock code. G - enter the Phone Book location number.

Prompts and Messages

Your phone responds to key presses by displaying either easy to understand prompts that guide you to the next action, or simple messages confirming that your action is complete. Prompts and messages are represented in this manual in LCD style, for example:

Enter PIN or Completed.

Other Symbols

You will find the following symbols used throughout this manual:

AA Note contains additional information which is relevant to the feature/item. ! A Caution contains important additional information which is relevant to the

efficient and/or safe usage of your phone.

j This symbol indicates that the feature is a Personality™ feature that can be customised

to meet your requirements.

Menu Navigation.

i This symbol indicates a short key sequence for the feature.

Introduction

Menu Navigation

A large number of your phone’s options are accessed by using menus which use a common approach for selection, change and cancellation.

Please read this section carefully before attempting to access a menu option. When you understand the common approach to menu navigation and how the menus are shown on the page, you will be able to access and change options with ease.

Entering the Menus

Two different keys are used to access the menus:

$ enters the Options menu whilst in standby mode; enters the In-call menu

during a call.

E enters the Quick Access menu.

Once entered, the menus use the $, ª, <, >, O and C keys in a common manner to access, select and change individual options.

Leaving the Menus

To leave any of the menus, you can either press and hold the C key or repeatedly press the

C key. Both of these actions will return your phone to the standby mode.

i Alternatively, a quicker way to leave the menus is to press EC.

Menus and Sub-menus

A menu is a simple list of options. Some of these options provide access to a further list of options called a sub-menu. When navigating through the menus you may find it is helpful to

think in terms of menu levels - the ‘parent’ menu being on one level and its sub-menus being on a lower level.

Moving To and Selecting a Menu Option

To move from one option to another on the same level, use the scroll keys ª; press the bottom

half to scroll forwards and press the top half to scroll backwards. When you find the option you want, press the

Depending on the option you select, one of three things will happen:

• either a brief message will be displayed confirming an action, for example Completed.

• or a prompt will be displayed requesting you to enter information, for example Enter PIN or Enter Name.

• or the first option of a sub-menu will be displayed. You can select this option using the

O key or browse through the other options using the scroll keys.

To leave an option or sub-menu, press the C key. This will take you back to the parent menu item.

Menu Options with Security Codes

Some options are protected from misuse by requiring you to entry one of the security codes. To use these options, you must enter the requested code before proceeding.

O key to select it.

Introduction 3

Menu Navigation - A Working Example

The following steps will take you through how to switch the Extended Menus option on:

1 When the phone is in the

standby mode, press the key. This will access the Options menu and Phone Book will be displayed.

2 Press the ª key repeatedly until

the Phone Setup sub-menu item is shown in the display.

3 Press the O key to select the

sub-menu.

4 Press the

the Extended Menus submenu item is shown in the display.

5 Press the

item. You can now select between On or Off, the current setting will be shown with a character. If the next to Off, press

ª key repeatedly until

O key to select this

z character is

ª and then

O to switch on the Extended

Menus. If the next to On, press the setting as it is.

z character is

C to leave

j Short, Extended and

Personalised Menus

With Personality™ you can personalise the menus by choosing which features you want readily available. The features that are less frequently used can be stored out of sight.

The menu diagrams in this manual show the condition of the menu settings when you first receive your phone. Some features are in the Short Menu and are shown in bold type. Other features are in the Extended Menu and appear in italics.

You can change which features appear in the Short and Extended Menus, and therefore personalise the menus, to suit your requirements.

If you want to move a feature from the Short Menu to the Extended Menu (or from the Extended Menu to the Short Menu), go to the feature and then hold down the appears offering the following choices:

• Add the current feature to the Short Menu/Extended Menu.

• Leave the current feature in the Short/Extended Menu.

Select the option you want by pressing the O key. The settings for some menu features cannot be changed.

O key until a prompt

Introduction

Total Customer Satisfaction

At Motorola, Total Customer Satisfaction is a top priority. If you have a question, a suggestion or a concern about your Motorola Cellular Phone, Motorola wants to hear from you.

Please contact the Motorola Cellular Response Centre by fax on: +44 (0) 131 458 6732, or use one of the local phone numbers in the following countries:

Austria 0660 7246 Belgium 0800 72 370 Czech Republic 00420 2 21 85 21 01 Denmark 4348 8005 Egypt 02 3411800 Eire 01 402 6887 Finland 0800 117 036 France 0 803 303 302 Germany 0180 35050 Greece 00800 441 28150 Hong Kong 852 25063888 Italy 02 696 333 16 Jordan 06 863750 Kuwait 484 2000 Ext 1177 Lebanon 01 744156 Luxembourg 0800 21 99 Netherlands 0800 022 27 43 Norway 22 55 10 04 Oman 790925

People’s Republic of China 86 10 68466060 Portugal 01 318 0051 Qatar 418999 Saudi Arabia 01 2303294 Singapore 65 4855 333 South Africa 0800 11 48 49 Spain 902 100 077 Sweden 08 445 1210 Switzerland 0800 553 109 Taiwan 886 2 87731746 Turkey 0212 425 9090 UK 0500 55 55 55 United Arab Emirates 04 32 11 66 Hong Kong 852 25063888 For e-mail queries contact: service1@email.mot.com

For Internet queries contact:http://www.mot.com

Introduction 5

Motorola’s Warranty

Your Cellular Phone is warranted by Motorola to be of satisfactory quality, fit for its purpose and comply with applicable Motorola specifications for a period of twelve (12) months from the date you bought it (verified by reference to your proof of purchase).

This warranty does not apply if the phone has:

1 been mishandled, misused, wilfully damaged, neglected, improperly tested, repaired,

altered or defaced in any way.

2 a defect arising as a result of any failure to follow instructions either in the manual or

product specification.

3 a defect which has arisen from the use of non-Motorola approved accessories or

ancillary items attached to or in connection with the telephone.

This warranty does not affect your statutory rights as a consumer. Warranty conditions may vary depending on the country in which you bought the phone.

Introduction

Contents

Safety

Important information for the efficient and safe operation of your phone ....9

About Your Phone, Battery and SIM Card

Introduces your phone, explains how to charge and maintain batteries,

explains about your SIM Card ............................................................................13

Making and Receiving Phone Calls

Explains how to make single or conference calls, how to redial, how to

transfer a call, and how to end a call.................................................................21

Using The Options Menu

Provides an explanation of the Options Menu and how to use it ..................31

Using the Quick Access Menu

Provides an explanation of the Quick Access Menu and how to use it ..........61

Accessories

Details the accessories available for use with your phone..............................65

What To Do If...

Helps you to solve any problems that may occur.............................................67

Index

A comprehensive Index.......................................................................................69

The Manufacturer reserves the right to make changes in technical and product specifications without prior notice.

Contents 7

Contents

Safety

IMPORTANT

For the efficient and safe operation of your wireless

handheld portable telephone, observe these guidelines.

Exposure To Radio Frequency Signals

Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.

European and International agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy.

• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996

• Verband Deutscher Elektringenieure (VDE) DIN-0848

• Directives of the European Community, Directorate General V in Matters of Radio Frequency Electromagnetic Energy

• National Radiological Protection Board of the United Kingdom, GS 11, 1988

• American National Standards Institute (ANSI) IEEE.C95.1-1992

• National Council on Radiation Protection and Measurements (NCRP). Report 86

• Department of Health and Welfare Canada. Safety Code 6

These standards are based on extensive scientific review. For example, over 120 scientists, engineers and physicians from universities, government health agencies and industry reviewed the available body of research to develop the updated ANSI Standard.

The design of your phone complies with these standards when used normally.

Antenna Care

Use only the supplied or approved replacement antenna. Unauthorised antennas, modifications or attachments could damage the phone and may violate FCC regulations.

Phone Operation

Normal Position: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.

Tips on Efficient Operation: For your phone to operate most efficiently:

• Extend your antenna fully (if applicable).

• Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Batteries

! All batteries can cause property damage, injury or burns if a conductive

material such as jewellery, keys or beaded chains touches exposed terminals. The material may complete an electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects. When the battery is detached from the phone, your batteries are packed with a protective battery cover; please use this cover for storing your batteries when not in use.

Safety

Driving

Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please:

• give full attention to driving - driving safely is your first responsibility

• use hands-free operation, if available

• pull off the road and park before making or answering a call if driving conditions so require.

Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of six

(6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Persons with pacemakers:

• Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned on.

• Should not carry the phone in a breast pocket.

• Should use the ear opposite the pacemaker to minimise the potential for interference.

If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference you may want to consult your hearing aid manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

Aircraft

FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft.

Blasting Areas

To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “turn off two-way radio”. Obey all signs and instructions.

Safety

Potentially Explosive Atmospheres

Turn your phone OFF and do not remove the battery when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks, from your battery, in such areas could cause an explosion or fire resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are often, but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; areas where fuel odors are present, i.e. if a gas/propane leak occurs in a car or home; areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.

For Vehicles Equipped with an Air Bag

An air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Safety

European Union Directives Conformance Statement

This product is in conformance with the requirements of the applicable EU Council Directives.

Declarations of Conformance with the requirements are located at: Motorola Ltd.

European Cellular Subscriber Division

Midpoint, Alençon Link Basingstoke, Hampshire RG21 7PL United Kingdom

APPROVED for connection to

telecommunications systems specified in the instructions for use subject to

the conditions set out in them.

S/1357/4/V/

Safety

About Your Phone, Battery and

SIM Card

Special Keys

S Turns the phone on and off. O Accept call, setting, option. C Reject call, setting, option. E Enter the Quick Access menu. $ Press to access the Options and Phone Book menus. <> Press both simultaneously to lock the keypad; also use to scroll left and right.

ª Press the top to scroll up and press the bottom to scroll down. f Press to call Voicemail. AThe shape of the keys that appear in the manual may vary slightly from those on the

phone.

The Smart Button

The Smart button (=) is on the left-hand side of your phone, below the volume button. Press it to quickly access all your Phone Book entries, and then either scroll through the entries using the volume button or press one of the alphanumeric keys to search for a specific name - for example, press search for the name Pam, or press

AIf a Phone Book entry does not have a name, it will not be displayed.

If you are using the optional headset, you can also use the Smart button to make, answer and end calls as follows:

• To answer a call, press = for 1.5 seconds.

• To end a call, press

• To make a call, enter or recall a number and then press and hold = for

1.5 seconds.

= for 1.5 seconds and then quickly press = again.

7 four times to search for the name Sam.

Volume Button

The Volume buttons (¬) are on the left-hand side of your phone, above the Smart button. The button is used for adjusting the keypad, earpiece and ringer volume. A volume meter will display the current volume setting. The meter will disappear after a short time, or if you press

O or C.

• To adjust the keypad and earpiece volume, press the button with no other features selected.

• To adjust the ringer volume, first select the ‘Adjust Ring Volume’ option in the Phone Setup Menu and then use the button to set the required volume.

The volume button can also be used to scroll though the Phone Book entries after pressing the Smart button.

AIf you receive a call and you do not want to answer it immediately, you can press the

volume button to stop the phone from ringing or vibrating. This will not answer the call.

7 to

About Your Phone, Battery and SIM Card 13

Decorative Cover

The front decorative cover plate surrounds keys on your phone. This cover is held on the front body using 10 slots along the edge. You can change the decorative cover to create different looks for your phone.

Changing Decorative Cover

ABefore changing the cover, always switch off the power and

disconnect the phone from the charger or any other device.

AAlways store the phone with cover attached.

To remove the cover, press and hold the release button along the side of the antenna using your right thumb.

Hold the top edge of the decorative cover and slowly pull it using your finger nail or with any flat base tool

Lift the cover edge along the side of the antenna, until all 5 catches are released.

Release the button and turn to open the decorative cover to release it from catches at other edge.

To replace the cover, first place and close the catches at the left edge, then align the catches at right and press uniformly from bottom to top gently forcing the edge inward.

The Display

The display on your phone can show alphanumeric characters as well as useful information symbols.The various elements of the display are as follows:

ABC123

k l

n o

About Your Phone, Battery and SIM Card

Characters are used to display messages and telephone numbers.

Signal Strength. The more segments displayed in the bar graph, the better the signal strength.

In Use. Displayed when a call is in progress.

Roam. Displayed when you are registered on a system other than your home

system.

Home Zone. Availability depends on your service provider.

Short Message Service. Displayed when the phone has received a message.

The symbol will flash when your message storage area is full.

Voicemail Waiting Indicator. Displayed when you have a voice message waiting. The availability of this feature depends on your service provider.

Ringer On. Displayed when the call ringer is selected. If you select the No Ring or Vibrate or the Vibrate Only options this symbol will not be displayed.

Battery Charge Indicator. The more segments displayed, the greater the battery charge.

B...K z

12:00

In addition, when you are expected to press the O key, a prompt will appear in the display, for example

Low Temperature Use

The liquid crystal display used in your phone will behave differently at extremely low temperatures. You may notice that the display responds slowly to key presses; this is to be expected and does not affect the phone operation in any way.

Completed.

Icons are displayed when you are in the Quick Access menu.

Indicates that a menu item is currently selected.

Real Time Clock. In the idle display, the real time clock can display the time in either a 12-hour or 24-hour format.

Earpiece Connector

The earpiece connector is on the left-hand side of your phone, above the volume button. Use this connector for the headset accessories available from your Motorola stockist.

Looking After Your Phone

• Never leave your phone or battery in extreme temperatures (over 60°C), for example behind glass in very hot, direct sunlight.

• To clean your phone, use a moistened or antistatic cloth. Do not use a dry or electrostatically charged cloth.

The Status Indicator

The status indicator on the top of the phone provides you with the following information:

Incoming Call Alternate Red/Green

In Service Flashing Green

No Service Flashing Red

Roaming Flashing Yellow

About Your Phone, Battery and SIM Card 15

Your Battery

Charging a New Battery

New batteries are supplied in a totally uncharged state. To ensure maximum battery performance, a new battery (or battery that has not been used for

several months) should be charged for at least 14 hours before use.

AA new battery will require several full charge/discharge cycles in order to achieve its

optimum performance.

AA new battery, or a battery that has not been used for several months, may cause a

premature fully charged indication. Ignore this indication and let the battery charge for several more hours, remove and re-insert the battery into the charger, and charge for an additional 14 hours.

Important Battery Information

! Always treat your batteries with care. See ‘Batteries’, at the beginning of this

manual.

! Never leave your battery in extremely high temperatures (over 60°C), for

example behind glass in very hot, direct sunlight.

! Only Motorola Original Accessory batteries can be charged in the phone or the

optional desktop charger. This is to protect you and your phone from the risks of incorrect charging.

ADo not use lithium ion batteries at extremely low temperatures as the maximum

standby/talk time will not be available when cold.

To ensure that you enjoy maximum battery life and use your battery to its fullest capacity:

• The battery should be at or near room temperature when charging.

Battery Performance and Maintenance

• Best battery performance will be achieved when you regularly charge and discharge batteries as instructed in this manual.

• Battery performance is greatly affected by network coverage.

•Set Battery Saving Mode to On (see ‘Phone Setup Menu’) and/or Frequency of Search to Slow or Medium (see ‘Network Selection Menu’).

• If left unused, a fully charged battery will discharge itself in approximately one month.

• When not in use, store your battery uncharged in a cool, dark and dry place.

Low Battery Warning

When the battery level is low and only a few minutes of talk time remain, a warning signal (two double beeps) will sound, the border of the battery symbol will begin to flash, and

Battery

When the battery is completely discharged, your phone will turn off.

will be displayed.

Low

About Your Phone, Battery and SIM Card

Removing Your Battery

! Switch off your phone before

removing the battery. Failure to do so may damage your phone memory.

1 Press the release catch on the battery

compartment and lift off the cover.

2 Push the battery towards the top of

the phone and lift the battery out from the bottom end.

Fitting Your Battery

1 Remove the battery compartment

cover.

2 Align the connections on the battery

with the connections on the phone.

3 Press the battery towards the

connections and push it downwards until it clicks into place. Replace the cover.

Charging Your Battery Using the Charger

The charger can power the phone and charge a fitted battery.

! Ensure that the local

mains voltage at your location matches that of your charger.

Fit a battery onto your phone. To charge your battery:

1 Connect the charger to the

phone.

AThe connector is keyed

and can only be inserted one way.

2 Insert the charger plug into a suitable mains power socket.

A beep-tone is heard and the battery icon flashes when charging begins.

AYour phone can be either on or off during charging.

The state of charging is monitored and displayed by your phone. See ‘Battery Meter Indicators’ later in this section for details.

About Your Phone, Battery and SIM Card 17

Desktop Charging Your Battery

AThe Desktop Charger is an optional accessory that allows you to

charge both the battery fitted in your phone and a spare battery at the same time.

Batteries charge in about 2 to 3 hours, depending on the battery.

AIt is normal for batteries to become warm during charging.

1 Connect the charger to the desktop charger socket.

(The connector is keyed and can only be inserted one way.)

2 Plug the charger into a standard mains socket. 3 Insert your phone into the desktop charger as shown.

A spare battery can be charged on its own or at the same time as your phone. Insert the battery into the desktop charger as shown.

AFor maximum NiMH battery charging, you should double the

charge time.

ACharge times will increase if you make or receive phone calls

while charging.

Battery Indicators

our Motorola cellular phone includes the Motorola Expert Performance

) charging system. This enables the charging circuits in both the phone

( and the optional ( communication, the charger can implement the optimum charging cycle for best performance and determine the level of charge.

Your phone monitors and displays information about your battery. The following message will appear on the display, as the condition occurs:

Low Battery

Insert Battery

Invalid Battery

) desktop charger to communicate directly with the battery. Based on this

The battery charge is low. The battery should be recharged.

No battery fitted; external power connected

This message is accompanied by a single beep. Your phone is alerting you that you do not have charging capabilities with this battery even though the battery may be able to power the phone.

The most likely reason why your charging system does not recognise the battery is that the battery you have purchased is not a Motorola original battery and therefore does not have the communications technology built into it. All Motorola original batteries include this communications technology.

It is recommended that you use only Motorola original batteries, chargers and other accessories.

Battery Meter Indicators

The battery meter displays different messages depending on the batteries attached, and whether or not there is an external power source. The battery meter is found in the Call Related Features part of the Options Menu.

Charging Battery

Charging Complete

Invalid Battery

AWhen the battery is completely discharged, you must charge the battery for one

minute before you can make or accept a phone call.

About Your Phone, Battery and SIM Card

The battery is being charged.

Charging is complete.

Battery may be defective, or may not be a Motorola original battery.

Your SIM Card

Your SIM (Subscriber Identity Module) card was supplied by your Cellular Service Provider when you bought your phone. You will not be able to make or receive calls if you do not have a SIM card inserted in your phone.

ASome networks allow you to make emergency calls without a SIM card inserted.

The SIM card is a ‘Smart Card’ that contains your phone number, service details and memory for storing Phone Book numbers and messages. You can therefore use your SIM card in someone else’s GSM phone and you will be charged for the call. Like a bank or credit card, you should keep your SIM card secure. Do not bend or scratch your card and avoid exposure to static electricity or water.

! Switch off your phone before inserting or removing the SIM card. Failure to do

so may damage the memory on your SIM card.

SIM Card Insertion/Removal

1 Switch off your phone by pressing and holding the

S key, remove the battery cover and the battery.

2 Slide the SIM cover towards the left and lift up the

right side of the cover.

3 If necessary, remove the SIM card from the recess in

the base of the phone.

4 Place the SIM card into the recess in the base of the

phone so that the notch is in the bottom right-hand corner.

5 Replace the SIM cover, then press and slide it to the

right to lock it into place.

6 Replace the battery and battery cover.

If the SIM card is inserted the wrong way round, or damaged, the Remove the SIM card, check that it is the right way round and then re-insert it into the phone.

If either of the

Blocked See Supplier messages are displayed,

then you will need to contact your Cellular Service Provider.

Check Card message may be displayed.

Bad Card See Supplier or

About Your Phone, Battery and SIM Card 19

About Your Phone, Battery and SIM Card

Making and Receiving Phone Calls

Switching the Phone On and Off

To switch the phone on or off, press and hold the S key. If VibraCall™ is selected, the phone will vibrate when it is switched on. If you switch the phone on and there is no SIM card inserted, you will be asked to insert one. Once inserted, the phone will check that the SIM card is valid. A number of messages will then be displayed:

• Enter PIN - a request to enter the SIM card PIN code (if required).

• Enter Phone Unlock Code - a request to enter the phone unlock code (if required).

• Searching... followed by a network name - as the phone searches and then finds a suitable network to connect to.

Entering Your SIM Card PIN Code

To enter the PIN code, enter AO. As you type in each digit of the PIN code a If you make a mistake, press and release the

C key down will remove the entire entry.

When the PIN code is complete press the If the PIN code entered is incorrect, the warning message

followed by

Enter PIN.

! If the PIN number is entered incorrectly three times in a row, your phone will

automatically lock-up and the Blocked message will be displayed. See

‘Unblocking Your Phone’ for details on unblocking your phone.

The PIN code can be changed, see ‘Change SIM PIN Code’ in the Phone Setup Menu section for more details.

j Entering Your Unlock Code

If your phone displays the message Enter Phone Unlock Code you must enter your unlocking code by entering

The unlock code is a four digit number which is set at manufacture to 1234. The code can be changed, see ‘Change Unlock Code’ in the

If you forget your unlock code, press the option. Enter

O D, enter a new unlock code, and press O.

BO.

* character will be displayed.

C key to remove the last digit. Holding the

O key.

Wrong PIN will be displayed,

Phone Setup Menu section for more details.

$ key. This will display the ‘Change Unlock Code’

Making and Receiving Phone Calls 21

Making a Phone Call

To make a phone call, your phone must be switched on and unlocked. It will not be possible to make a phone call unless you are in an area where there is a GSM900 or

1800 service. When a service has been found, a series of rising bars, signal strength. There are a number of different ways to make a phone call:

• Using the digit keys.

• Using automatic redial.

• Redialling the last number called.

• One-touch dialling a Phone Book entry*.

• Dialling a Phone Book entry*.

• Calling an embedded number in a message.

• Using the Smart button (

=).

A*Your phone contains a ’phone book’ that can be used to store names and telephone

numbers. See ‘What is the Phone Book?’ for further details.

The simplest method of making a phone call is to enter the number using the digit keys then

press

AIf you make a mistake, press and release the C key to remove the last digit.

Holding the C key down will remove the entire number.

Your phone will then attempt to make the phone call. The display will show Calling to show the call attempt is being made. If the call is not answered, pressing (models with flip only), at this point will end the attempt. When the phone call is answered, the display will change to

To end your call press

Automatic Redial

If your call attempt does not succeed, the message Redial? will be displayed for five seconds.

O at this point will automatically redial the phone number.

Pressing When the call is answered, you will hear a short ring tone. The maximum number of redial attempts is set by your Cellular Service Provider. If the phone call cannot be connected within this maximum, the message

Redialling the Last Number Called

O, or close the phone.

Redial Failed will be shown.

x, will show the

O, or closing the flip

End Call?.

i When in standby mode, press OO.

Alternatively, you can retrieve the last number dialled using the ‘Last Ten Calls’ feature in the Phone Book menu.

j One-Touch Dialling Phone Book Numbers

To quickly retrieve and dial a number stored in the first nine locations of your Phone Book#, press and hold the appropriate digit key. For example, pressing and holding number stored in location 2 of your Phone Book.

2 will dial the phone

AYou do not need to press O to call the number.

# The Phone Book entries that you are able to access will depend on the One-Touch Dial

Setting option in the Phone Book menu.

Making and Receiving Phone Calls

j Dialling Phone Book Numbers

Alternatively, enter the phone book G number followed by >O.

j Dialling Phone Book Numbers with Smart Button

The following Smart button (=) options are available:

•Press = and use the volume button to scroll to the stored number, or press the appropriate digit key to skip to a particular letter. To make the call, either hold down for 1.5 seconds or press

Calling an Embedded Number in a Message

Details on how to call a number embedded in a message are given in the section.

Messages Menu

International Phone Calls

To make an international phone call press and hold the 0 key. After a couple of seconds the international dialling prefix without knowing the local international access code. Now enter the country code, followed by the phone number. The country code follows the conventional format, 49 for Germany, 44 for the UK, 46 for Sweden, etc. Just like a conventional international call, remove the leading ’0’ of the area code when you dial.

+ will appear in the display, this allows you to call from any country

Inserting Pauses Into Phone Numbers

To obtain a three second ’pause’ character in a phone number, press and hold the < key for a couple of seconds, the pause symbol

The pause character produces a three second delay whenever it is used. However, the first pause character in a phone number is a special case, it will not begin its delay until the call is answered.

Ü will appear.

Pause - A Working Example.

If, for example, you have a tone-based voicemail system on 555-6911, with a mailbox number 1066 and password 2001. Then you may dial the following number:

5556911Ü1066Ü2001O.

The first part of the number would be used to call the voicemail system. When the call is answered the first pause will produce a delay of three seconds before the tones

1066 are sent to select the mailbox.

for There will be a second pause of three seconds before the tones for password.

2001 are sent as the

GSM Emergency Calls

The world-wide GSM standard provides a single, uniform number, 112, to dial in cases of emergency. Provided that your phone has found a network, you will be able to make an emergency call. The call can be made regardless of any security codes and, depending on the network, with or without a SIM card inserted. The emergency call will be directed to a central emergency operator. To dial the GSM emergency number, press While the emergency call is being made and connected, the display will show

Calling

AEmergency calls can be made without a battery fitted if the phone is powered by the

travel charger.

112O.

Emergency

Making and Receiving Phone Calls 23

Receiving a Phone Call

To receive a phone call:

• Your phone must be switched on and unlocked.

• You must be in an area where there is GSM900 or 1800 service.

• Your Call Diversion and Call Barring settings should not be set to divert or bar incoming calls.

When your phone receives a call, it will ring or vibrate and the display will show the Call

message (if you have Caller Line Identification, the caller’s number or name will be displayed instead). To answer the call, press Only’ feature is set to Off). When the identification is displayed, you can decide whether or not to answer the call by

O, a numeric key (1 to 9), < or >. To set this option, see ‘Key Answer

pressing Only’. You can also answer using the keys if the phone rings whilst the phone is already open.

If you do not wish to answer a call you can either:

Press and release the C key. If you have enabled the ’Detailed Diverting - If Busy’ or

‘Divert when unavailable’ options in the Options Menu, the caller will be diverted to the forwarding number, otherwise the caller will hear the busy tone.

Press and hold the be offered.

If your phone rings and you do not answer it, the message Unanswered Call will be displayed to show you that a call attempt was received.

Ending a Phone Call

To end a phone call, press O, C or close phone.

O or open the flip (only on models with a flip when the ‘Key Answer

C key. This will reject the incoming call. No call divert option will

Making and Receiving Phone Calls

In-Call Menu

The “In-Call” menu provides access to additional functionality during a call.

Entering the In-Call Menu

The “In-Call” menu is accessed by pressing the

Leaving the In-Call Menu

To leave the “In-Call” menu press the

C key.

In-Call Menu Options

The options listed in the “In-Call” menu will dynamically change depending on the current call state. The following list contains all of the possible options in the “In-Call” menu.

AOnly some of the options will

Handsfree On/Off

This option is used to switch between Handsfree and normal operation if the phone is installed in a car kit that does not have an automatic presence detector.

Hold Call

This option will put the active call on hold.

Make a New Call

This option allows you to make another call.

Restrict My Number

This option allows you to make a call without the remote user getting advanced warning of the number.

End Active Call

This option terminates the active call, and makes the call that was previously on hold, the active call.

End Held Call

This option will terminate a held call.

End Current And Held Call

This option will terminate all connected calls.

Switch Calls

This option allows you to switch between the active call and the call that is on hold.

Conference Call

This option connects you with up to five other telephones on one call (see ‘Making a Conference Call’).

$ key during a call.

appear at any given time. The order of the options may vary.

Making and Receiving Phone Calls 25

Transfer Call

This option transfers a call to another telephone (see ‘Transfer Call’ later in this section).

Split Call

This option allows you to separate an individual from the main Conference Call.

Reject Waiting Call

This option will reject a waiting call.

Reconnect

This option will make the call on hold the active call.

Reconnect Held Call

This option is similar to Reconnect but will appear if you have a call on hold, and a call

Reconnect Held Call will make the call on hold the active call.

waiting.

Turn Mute On or Off

Temporarily turns the microphone off during a phone call. Reselect this option to resume your conversation.

Making and Receiving Phone Calls

j Call Holding and Call Waiting

Your phone supports the GSM options of Call Holding and Call Waiting. Using these options you can place a current phone call on hold and accept an incoming call or start a second call (See

Call Waiting’ in the ‘Call Related Features’ menu for details of how to control this

‘ feature).

Call Holding and Call Waiting Scenarios

The display will automatically change according to the status of your current call (or calls) and will propose the option that you are most likely to want. Press

$ and then ªto scroll through the “In-Call” menu for the alternative options. By following

this procedure you will find that even the triple combination of an active call, a held call, and a call waiting is easy to manage.

The following points summarise the more common situations:

• To put an active call on hold, press $, the display will show Hold Call Select?

O to put the call on hold. To reconnect the call, press O.

- press

• To put an active call on hold and make another call, first put the active call on hold, then press

$ and select the Make New Call option

• To switch between an active call and a held call press Switch? prompt.

• To accept a waiting call during an active call, press Answer? prompt. The active call will be placed on hold. If you prefer to end the active call before accepting the waiting call, press $ and select the End Active Call option.

• To reject a waiting call, press simply press the

C key).

$ and select the Reject Call Waiting option (or

AIf you have an active call, a call on hold and a call waiting, you cannot accept the

waiting call until you end either the active call or the held call, or join the active and held calls.

Call Holding and Call Waiting Messages

During Call Holding and/or Call Waiting operations, your phone may display one or more of the following messages:

Trying

A request to hold the active call, swap the active with a held call, or add a member to a Conference Call, has been made.

or A request to reconnect the held call has been made.

Hold Failed

The request to hold a call has been unsuccessful.

Cannot Hold Second Call

A call is already on hold, you cannot place two calls on hold at the same time.

Connection Failed

The held call could not be made active again.

O to accept this option or press

O at the Two Calls

O at the Call Waiting

# A quicker method of making another call is to enter the number to be called directly and

O. Your phone will place the current call on hold and attempt to call the

press number entered.

Making and Receiving Phone Calls 27

Busy Try Later

Your phone is still working on a previous command. Wait a short time before repeating the command.

Anonymous

The person who is calling you has blocked their number from appearing on your phone.

Unavailable

The network is unable to provide the caller’s number.

Conference Unsuccessful

The request for Conference Call has been unsuccessful.

Transferring Call

A request to transfer a call has been made.

Transfer Unsuccessful

The request to transfer a call has been unsuccessful.

Making and Receiving Phone Calls

Making a Conference Call

This option joins the active call with a held call. With Conference Call, you can have a conference with up to five other telephones. At any time during your call, you can add, disconnect or

separate individuals from the Conference Call using other “In-Call” menu options.

AYou must subscribe to both Conference Call and Call Waiting Supplementary Services

to be able to use this feature.

Initiating a Conference Call

To initiate a Conference Call, place the active call on hold, and dial another phone number. You will then have one active call and one call on hold.

Press the active call and the call on hold will then join into one Conference Call.

Managing a Conference Call

While in a Conference Call, you will have the option to add new calls to the Conference Call or separate one of the members from the Conference Call.

Adding a New Call

There are a number of different ways to add new calls to the Conference Call:

• Using the digit keys.

•Using the Make New Call option from the “In-Call” menu.

• Recalling a Phone Book Entry using Quick Access.

• Answer Call Waiting.

No matter which method is chosen to add a new call, the original Conference Call will be first

placed on hold while the new call is being connected. You must then enter the “In-Call” menu and select progress.

Separate One of the Members in the Conference

During a Conference Call, you will also have the option to separate a selected member from the main Conference Call.

AIn order to separate a member from the main Conference Call, there must not be any

Press $ during a Conference Call and select Split Call. You will then be presented with the phone number or name of all members of the Conference Call. Use the scroll keys to find the selected member of the Conference Call. Once the desired member is selected, press the key and select Split Call. At this point, the selected call will be separated from the main Conference Call and private conversation between you and the selected member is possible. To re-join all the parties again, select

$ key to enter the “In-Call” menu and select Conference Call. The currently

Conference Call to join the New Call with the original Conference Call in

calls on hold.

Conference Call from the “In-Call” menu.

Making and Receiving Phone Calls 29

Transfer Call

Transfer Call transfers a call to another telephone. There are two ways to transfer a call; before or after the third party is connected.

AYou must subscribe to both Conference Call and Call Waiting Supplementary Services

to be able to use this feature.

Initiating Transfer Call Before the Third Party is Connected

To transfer a call to another telephone, press the $ key and select Transfer Call from

the “In-Call” menu. Enter the number where the call will be transferred and press Your phone will then attempt to transfer the call. The display will show

followed by be disconnected automatically.

Call Transferred. When the call has been successfully transferred, you will

Transferring Call

Initiating Transfer Call After the Third Party is Connected

If you already have an active call and a call on hold, press the $ key and select Transfer

Call from the “In-Call” menu. Your phone will then attempt to transfer the active call to the

call on hold. The display will show

Transferred

automatically.

. Once the call has been successfully transferred, you will be disconnected

Transferring Call followed by Call

Making and Receiving Phone Calls

Using the Options Menu

Using the Options Menu 31

The Phone Book Menu

AIf your service provider has added their own menu, the Phone Book menu will not be

the first item in the Options menu.

j What is the Phone Book?

You can store names and telephone numbers as entries in an electronic ’Phone Book’. These entries are stored in the Personal Numbers list in your phone or SIM card’s memory, and in the

Fixed Dial list

Your phone can store 100 entries and the SIM card can store up to 155 entries in the Personal Numbers list. The number of SIM card entries will vary depending upon the type of SIM card issued by your Cellular Service Provider. You can also store up to 40 entries in a Fixed Dialling list if you have this feature. Fixed Dialling allows you to limit use of your phone to particular numbers, or, if you wish, to country codes, area codes, or other prefixes of your choosing.

Each Phone Book entry comprises:

# Availability of the Fixed Dialling feature depends on the type of SIM card you have.

Using the Options Menu

on your SIM card. Once stored, a number can be quickly retrieved and dialled.

• A telephone number. Up to 32 digits can be stored, but this is reduced to 20 digits for SIM card locations.

• A name. Up to 16 characters for phone locations. Up to 50 characters for SIM card locations, but typically 10 or less.

• A location label - from 1 to 255 in your Personal Numbers list, or 1 to 40 in your Fixed Dial list.

Color Tagged Phone Book

You can assign one of 3 display backlight colors to any of the Phone Book numbers for easy classification and identification and of entries in the Phonebook. You can tag a particular color to a single phonebook entry or to multiple entries, thus enabling you to identify a particular caller or a selected group of callers. To set a color tag to a phonebook entry, first enter the number and name. Then select the color tag (red, yellow or green) that you want to assign to this entry. If you subscribe to Caller Line Identification (CLI), the phone display color will change to the color of the color tag when you receive an incoming call from this number. When you make outgoing calls by retrieving an entry from your phonebook and this entry has a color tag assigned to it, the phone display color will change according to the color of the color tag you have assigned to this phonebook entry. If you dial a number from the keypad instead of retrieving it from the phonebook, the display color will not change even if the number dialled matches a color tagged phonebook entry. Color tags cannot be assigned to phonebook entries stored in the SIM card or to the fixed dialling list.

Postscripting

This allows you to make use of area codes and other prefixes previously stored in your Phone Book when making a call. To use postscripting, select the Phone Book entry containing the prefix and then simply enter the rest of the number and press You can also use postscripting if you want to call a number similar to one you have stored in your Phone Book. Retrieve the number from the Phone Book, delete the relevant digits and then enter the new number.

O to make the call.

APostscripting a number does not overwrite the entry in the Phone Book. APostscripting is not available when accessing the Phone Book using the Smart button.

How to Enter Alphabetic Characters

The 0, 1,... ...,8 and 9 keys are used to enter alphabetic characters, for example

when storing names in the Phone Book or when creating messages. For example, if you press the

required character, then you can press the same key again to show

L, another... ...will display 5. Your phone will continue to scroll through the characters available

on the selected key with each new key press. A long press of any of the keys will switch all the characters to lower case, a second long press

will switch back to upper case. To enter the next character press the appropriate key. If, however, the next character is on the

same key as the previous character you will first need to press the key a second time will produce a space.

If a mistake has been made, you can go back to the incorrect character by pressing

5 key, the first displayed character will be J. If this is not the

K. Another press will display

> key. Pressing the >

Using the Options Menu

Characters can be removed from the display by pressing the C key. The character before the cursor ( Press the

Available Characters

Press the appropriate keys to get the following characters:

O key to store the information.

Ö) is the character which will be deleted.

1 Space . 1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡ ¢

Space . 1 ? ! , Ÿ Ä & : " ( ) ' ` @ % ¡ ¢

2 A B C 2 [ ® ± ¼ ¾ ©

a b c 2 { ¯ ± ½ ¾ ©

3 D E F 3 ° ¿ ¤ ²

d e f 3 ° ¥ ¤ ²

4 G H I 4 À §

g h i 4 À §

5 J K L 5 Á

j k l 5 Á

6 M N O 6 ] \ « ¨ µ

m n o 6 } | ¬ ¨ µ

7 P Q R S 7 Â ¾ ¸

p q r s 7 Â ¾ ¸

8 T U V 8 ¹ ^ ¦

t u v 8 ¹ ~ ¦

9 W X Y Z 9 º ·

w x y z 9 º ·

0 + - 0 x * / = > < #

+ - 0 x * / = > < #

The top line for each key shows the upper case characters, the lower line shows the lower case.

Personal Numbers

The Personal Numbers sub-menu is used for creating and managing your list of personal numbers.

Find Entry By Name

i Press = and use the volume button to scroll to the stored number, or press the

appropriate digit key to skip to a particular letter. To make the call, either hold down

= for 1.5 seconds or press O.

This option is used to select a telephone number from a list of alphabetically sorted Phone Book names.

Once selected, this option will display the message three characters from a name but you do not need to enter all three characters to begin a search.

The Phone Book entries will be searched and the first alphabetically matching entry will be displayed.

If there isn’t a name matching your entry, the nearest alphabetically matching entry will be displayed.

If you do not enter any name information, the first alphabetical entry will be displayed.

Using the Options Menu

Enter Name. You can enter a maximum of

If there are no names stored, No Names Stored will be displayed. To display adjacent Phone Book entries use the

press the

O key to select it. The phone then enters the options sub-menu for Find Entry

ª keys. When the desired name is displayed

By Name. See ‘The Options for ‘Find Entry By ...’’.

Find Entry By Location

i G>

This option is used to select a telephone number from a list of numerically sorted Phone Book locations.

Once selected, this option will display the message location number. If the entered location is not valid, a timed message displayed and the phone will return to the The Phone Book entries will be searched and an entry will be displayed.

If you enter a location number for which there is no entry, and the nearest non-empty location will be selected instead.

If you did not enter a location, the first numerical entry will be displayed. If there are no numbers stored, To display adjacent Phone Book entries use the

O key to select it. The phone then enters the options sub-menu for Find Entry By

the

Location

. See ‘The Options for ‘Find Entry By ...’’

No Numbers Stored will be displayed.

Enter Location. You can now enter a

Range 1-XXX will be

Enter Location menu item.

Location Empty will be displayed

ª key. When the desired name is displayed press

The Options for ‘Find Entry By ...’

Once a Phone Book entry has been selected, it can be called, modified or deleted. If the Phone Book entry is in phone memory, you can also add, edit or delete the Color Tag.

Call Number

This option is used to call the selected Phone Book telephone number.

Modify Name or Details

This option is used to change the selected Phone Book entry.

The entry’s current telephone number, name and color tag will be presented, in turn, for modification. You can accept the current settings or modify as required.

Erase Name and Number

This option is used to erase the selected Phone Book entry. Simply press the

O key when the phone displays the message Erase Name And

Number. The option will display the timed message Erased XXX and then return to the Find Entry menu item.

Add Entry

Press E. Select the Quick Access feature (T Add to SIM? or F Add to Phone?).

This option is used to add (store) entries to the Phone Book. You can choose to add the new entry to either the phone or SIM card memory locations.

Add To Phone Memory, Add To SIM Card Memory

Once you have selected the destination of the new entry, you will be asked to enter the telephone number, name and location number of the new entry. The last telephone number displayed will be presented by default; it can be used or discarded as required.

Using the Options Menu

If the entered location is not valid, a timed message Range YYY-ZZZ will be displayed and the phone will return to the another entry, you will be asked for confirmation that the location can be overwritten. If you do not supply a location number, the next available location will be used. When the new entry has been entered, a timed message

Enter Location prompt. If the chosen location is currently used by

Stored XXX will be displayed.

Check Capacity

This option is used to check the number of free Phone Book entries in the phone or SIM card memory areas.

Check Phone Capacity, Check SIM Capacity

Once selected, a timed message XX Unused Locations displays the requested information.

Prevent Access

This option enables you to prevent access to the Personal Numbers list.

To SIM Card Memory, To Phone Memory, To Phone & SIM Memory, No Memory Restrictions

You can prevent access to all entries in the SIM card memory, the phone memory or both the phone and SIM card memory. To cancel all access restrictions use the No Memory Restrictions option.

When you change the restrictions, you will be requested to enter the Security Code before the change is made.

Show Services

i Press E. Select the Quick Access feature (e Show Services?).

This option displays a list of phone numbers and services provided by your Cellular Service Provider.

AAvailability depends on the type and settings of the SIM card, and/or your

subscription to this feature.

Last Ten Calls

These options allow you to review your most recently used phone numbers. Depending on the option you choose, you can then redial a phone number, store a phone number in your phone book, or erase all of the phone numbers.

After you select an option, use the

O key to proceed. AYou can use postscripting to modify a number once you have retrieved it from either

of the Last Ten Calls lists.

Last Calls Made

Select this option to redial the phone number of any one of the last ten calls made.

Last Calls Received

i Press E. Select the Quick Access feature (W Received Calls?).

ª keys to scroll through the list of phone numbers. Press the

Select this option to redial the phone number of any one of the last ten calls received. In addition, you can add time and date information to one call, and you can store any of the phone numbers in your phone book.

Using the Options Menu

AYou will only see numbers in the Last Calls Received list if you have Caller Line

Identification.

When you scroll through your last ten calls, each call appears with a call position number, for example: indicates that you did not answer the call. Press the following options:

1+, 2-, 3+ ... 10+. A + symbol indicates that you answered the call. A - symbol

O key to select a phone number. You can then scroll through and select one of the

Call Number

Select this option to call the phone number.

Time and Date

Select this option to add a time and date stamp to the phone number. Press the O key to accept the date and time stamp and return to the list of last ten calls received.

Add to Phone Memory

Select this option to add all the phone number details (including any details you have added) to your phone memory.

Add to SIM Card Memory

Select this option to add the phone number details (including any details you have added) to your SIM card memory. If the name in the received call does not appear in your phone book, the phone prompts you to Entry’ in this section.

Enter Name and Enter Location. For further details, see ’Add

Erase All Numbers

This option erases all the numbers stored in your Last Ten Calls Made and Last Ten Calls Received lists.

AThe Last Ten Calls lists will be erased when a new SIM is inserted in the phone.

My Phone Number(s)

This option allows you to access your cellular phone, fax and data numbers so that you can retrieve or modify them when required. For example, if you have difficulty remembering your cellular phone number, store it with the name the number as required. The My Phone Number(s) list is stored on your SIM card. When you select this item, the first location will be displayed. Use the the phone numbers stored. To enter or change a number, scroll to the location and press enter a phone number and then a name. Press

My Phone and then you will be able to retrieve

ª keys to scroll through

O. You will be prompted to

O to store the information.

ADepending on your Cellular Service Provider, you may find that one or more of the

entries in the My Phone Number(s) list will have been defined. You may not be able to change these predefined entries.

Fixed Dialling

AAvailability of the Fixed Dialling menu depends on the type of SIM card.

This feature allows you to limit use (typically third-party use) of your phone to a predefined list of telephone numbers or, if you wish, to a list of country codes, area codes, or other prefixes of your choosing. When Fixed Dialling is switched on, the only numbers that can be dialled from your phone are those stored (or whose prefix is stored) in the Fixed Dial list. If you attempt to dial any other

Using the Options Menu

number (apart from an emergency number), the message Restricted will be displayed. You will not be able to make fax or data calls. To make a call when Fixed Dialling is switched on, either dial the number manually, or select it from the Fixed Dial list and press Up to 40 entries can be stored in the Fixed Dial list. The list is stored on your SIM card.

! This option may be affected by the Call Barring setting.

View Fixed Dial List

This option allows you to scroll through the numbers in the Fixed Dial list. When you find the number you want, press

O to make the call.

Setup Fixed Dialling

This option allows you to switch Fixed Dialling on or off and to enter or change entries in the Fixed Dial list.

You will be prompted to enter your PIN2 security code when you select this option.

Switches fixed dialling on.

Off

Switches fixed dialling off.

Edit Entry

Modifies or clears an entry in the Fixed Dial list. When you select this option, the first non-empty location in the list will be displayed. Scroll to the entry you want to change and press will be prompted to edit the phone number and the name. To erase the entry, press

O. You

Add Entry

Adds a phone number and name to the Fixed Dial list. When you select this option you will be prompted to enter the phone number, name and a location number. If you do not specify a location number, it will be stored in the next available location.

AWhen setting up your Fixed Dial list, you may want to reserve the first nine locations

for phone numbers you wish to One-Touch Dial. See also ‘One-Touch Dial Setting’.

Erase Entry

Erases a phone number and name from the Fixed Dial list. The first entry in the Fixed Dial list will be displayed. Scroll to the entry you wish to delete and press

One-Touch Dial Setting

This option allows you to specify which Phone Book list can be One-Touch Dialled.

To Phone Memory

Switches One-Touch Dialling to your Personal Numbers list stored in phone memory (locations 1 to 9).

To SIM Card Memory

Switches One-Touch Dialling to your Personal Numbers list stored on your SIM card (locations 101 to 109).

To Fixed Dial list

AThis option is only available if you have Fixed Dialling.

Switches One-Touch Dialling to your Fixed Dial list (locations 1 to 9).

Using the Options Menu

Call Related Features Menu

Show Battery Meter

This option displays the approximate amount of battery capacity remaining, for example:

Number of

Segments

1 less than 5% (recharging needed)

3 less than 20%

5 less than 60%

7 greater than 60%

Approximate Charge Level

i Press E. Select the Quick Access feature (G Battery Meter?).

Restrict My Phone Number

’Restrict My Phone Number’ is a network feature. You will need to subscribe to one of the two Caller Line Identification restriction features with your Cellular Service Provider.

Show ID on Next Call

Your phone number is sent with the next attempted call, after this your phone number will not be sent until you re-select this option.

Restrict ID on Next Call

i Press E. Select the Quick Access feature (c Restrict My ID?).

Your phone number will not be sent with the next attempted call, after this your phone number will be sent with calls until you re-select this option.

Using the Options Menu

j Call Diverting

Call diverting is a network feature. If your phone is unavailable, or you do not wish to receive calls, incoming calls can be diverted to other phone numbers.

This option can be used to:

• Divert all incoming Voice calls unconditionally.

• Divert incoming Voice calls whenever your phone is unavailable, busy, not reachable or not answered.

• Divert incoming Fax calls.

• Divert incoming Data calls.

• Reset all diversion options to off.

AYou cannot change the call

divert settings when you are out of network coverage.

After selecting any of the call divert options there will be a short delay while the phone asks the network for the current setting.

Divert Voice Calls

This option will allow you to set your phone to Divert When Unavailable, Divert All Voice Calls or Detailed Diverting.

Divert When Unavailable

This option will enable you to divert all incoming Voice calls to a single number, whenever your phone is unavailable.

The option has two settings, If you change the setting to

digit keys.

On or Off.

On, you will be asked to enter a diversion phone number using the

ASetting “Divert When Unavailable” to On will have the same effect as setting all

“Detailed Diverting” options to On.

AWhen On, Divert When Unavailable takes priority over detailed diversion settings.

Divert All Voice Calls

i Press E. Select the Quick Access feature (P Divert On/Off?).

This option will enable you to unconditionally divert all incoming Voice calls to a single number. The option has two settings, If you change the setting to digit keys.

On or Off.

On, you will be asked to enter a diversion phone number using the

AWhen On, Divert All Voice Calls takes priority over all other Voice call diversion

settings.

Detailed Diverting

These options will enable you to divert Voice calls to different numbers, depending upon the current status of your phone.

Each of the following detailed diverting options operate in the same way.

Using the Options Menu

Each option has two settings, On or Off. If you change the setting to

digit keys.

On, you will be asked to enter a diversion phone number using the

ADetailed diversion settings are ignored while Divert All Voice Calls or Divert When

Unavailable are On.

If Busy

This option will divert incoming calls if your phone is busy.

If Not Reachable

This option will divert incoming calls if your phone cannot be contacted by the network.

If No Answer

This option will divert incoming calls if you do not answer the call.

Divert Fax Calls

This option will enable you to divert all Fax calls to a single number. The option has two settings, If you change the setting to digit keys.

On or Off.

On, you will be asked to enter a diversion phone number using the

Divert Data Calls

This option will enable you to divert all Data calls to a single number. The option has two settings, If you change the setting to digit keys.

On or Off.

On, you will be asked to enter a diversion phone number using the

Cancel All Diverting

This option will enable you to cancel the diversion of incoming calls.

! This option resets all diversion settings to Off and removes all diversion

numbers.

Talk and Fax

i Press E. Select the Quick Access feature (Z Talk and Fax?).

This is a network feature that allows you to speak and then send or receive a fax during the course of a single call.

AYour phone supports a data and fax transmission speed of up to 9.6kbps.

Before making a Talk and Fax call, ensure that:

• Your phone is “fax-ready” (it has been switched off, connected to the fax with one of the optional data/fax accessories, then switched back on). Connecting your phone to the fax in the middle of the call will not work.

• The Talk and Fax mode is set to On.

A Talk and Fax call automatically switches to fax mode when you start sending the fax. While the fax is being transmitted, the message automatically ends when the fax transmission is complete. You cannot switch back to voice mode in the same call.

Fax in progress will be displayed. The call

AWhile a Talk and Fax call is active, incoming call services like Call Waiting and Call

Holding are suspended.

If you receive a Talk and Fax call when:

Using the Options Menu

• Your phone is not fax-ready - you can only talk.

• Your phone is fax-ready but Talk and Fax mode is off - the call is automatically routed to your fax (you cannot talk).

Switches Talk and Fax mode on for the next and all subsequent calls.

Off

Switches Talk and Fax mode off for the next and all subsequent calls.

j Call Waiting

The Call Waiting menu item has two settings On or Off. If you select Off, you will be not be notified of waiting calls. The person trying to contact you will either receive the busy tone, or be

diverted by the ‘ If Call Waiting is

Detailed Diverting - If Busy’ option.

On, you will be notified of a waiting call by an audible alert and by the message

Call Waiting - Answer?. You can press the O key to accept the waiting call, or use

$ and then the ™ key to scroll to an alternative option and then press O.

the

AIf you have Caller Line Identification, the caller’s number or name is displayed instead

of the Call Waiting message.

AAvailability of this feature depends on your service provider.

j Call Barring

Call barring is a network feature which can be used to selectively bar outgoing and incoming calls.

If you change the barring setting, you may be asked to enter your barring password. There will be a short delay while the phone notifies the network of the new setting. When the change has been made by the network, the phone will display a confirmation message. The initial password will be supplied to you by your Cellular Service Provider when you subscribe to this service.

AThis option may be affected by the Fixed Dialling setting.

Bar Outgoing Calls

After selecting this option, there will be a short delay while the phone asks the network for the current setting.

Int’l Calls

When selected, this option will bar outgoing international calls.

Int’l Calls Except Home

When selected, this option will bar outgoing international calls, except those to your home country.

All Calls

When selected, this option will bar all outgoing calls, except emergency calls.

Off

When selected, this option will disable all call barring for outgoing calls.

Bar Incoming Calls

After selecting this option, there will be a short delay while the phone asks the network for the current setting.

Using the Options Menu

When Roaming

When selected, this option will bar incoming calls when you are roaming. You may wish to select this option, as some Cellular Service Providers charge an additional fee for

receiving calls when you are roaming.

All Calls

When selected, this option will bar all incoming calls.

Off

When selected, this option will disable all call barring for incoming calls.

Cancel All Barring

This option can be used to set all Call Barring options to Off.

Change Bar Password

This option can be used to change the call barring password. After selecting this option, you will be asked to enter the current password. You will then be asked to enter, and then re-enter, your new, 4 digit, barring password. When

the change has been made by the network, the phone will display a confirmation message.

Key Answer Only

AThis option is only available if you have a phone with a flip.

i Press E. Select the Quick Access feature (^ Key Answer Only?).

This feature has two options: On or Off. When set to

The call can be answered by pressing an appropriate key (

On, this feature allows the flip to be opened without answering an incoming call.

O, 1 to 9, ª, < or

>). To reject the call press C.

When set to

Off, opening the flip answers an incoming call.

Using the Options Menu

Messages Menu

Your phone supports the two GSM message features: Short Message Services (SMS) and Cell Broadcast.

SMS Messages

These are text messages that are sent specifically to and from your phone number. When an SMS message is received, your phone:

1 Makes three short alert tones (depending on the ‘Ring or Vibrate’ setting). 2 Displays the o (messages) icon. 3 Stores the message for later viewing, if there is space. If there is not enough space, the

o icon will flash. One or more messages must be removed before the message can be

stored.

Your Cellular Service Provider will transmit a message for a limited amount of time. If a memory location is not made available before the message is removed from the network, then you will not be able to receive or read it.

4 Message will then be displayed with the prompt; Read Now? 5 If O is pressed, the phone will enter the Received Messages browser and

immediately display the new message.

6 If C is pressed the phone will return to the screen which was displayed prior to

receipt of the message.

7 If any other key is pressed it will perform the function linked with that key. 8 If no key is pressed the display will time-out after 1 minute and return to the screen

which was displayed prior to receipt of the message.

Cell Broadcast Messages

These are general messages, broadcast to a group of phones and can only be received when your phone is in standby mode.

These messages are broadcast in numbered ’channels’ and, in general, each channel will tend to carry one particular type of information.

Typical cell broadcast channels could have information on local weather conditions, traffic reports or stock market prices. Please contact your network operator for a list of available channels and the information they supply.

Using the Options Menu

When the message has scrolled across the display, the beginning of the message will be shown until you either remove it or a new message arrives.

How to Read SMS Messages

You can use the scroll keys (ª) to scroll through messages in either the Received Messages or Outgoing Messages lists.

To display a specific message, enter the message number, for example press 5th message. If the message does not exist,

Alternatively, to display the next message, press

Invalid Msg Number will be displayed.

O and select Go To Next Message.

5 to display the

How to Create and Edit SMS Messages

Use the Message Editor to create or modify text messages. When you enter the editor, the last message that was edited will be displayed. Press and hold

new one, or modify the message displayed. For an explanation of how to enter text, see ‘How to Enter Alphabetic Characters’.

O once you have completed your message. You will then be presented with the

Press following options:

Send Message - If you select this option you will be prompted for a phone number, enter the number and then press

Store Message - Select this option to store your edited message in your Outgoing Messages list.

O to send the message.

AIf you don’t store the message after it has been edited, you will lose all your changes

as soon as you select another message to be edited.

j Call Voicemail

i Press E. Select the Quick Access feature (R Call Voicemail?.

This option will make a call to the current voicemail number. You can also press f to call the Voicemail number.

The voicemail number is entered using the ‘Voicemail Number’ option in the Message Settings menu.

j Received Messages

C to clear the message and start a

i Press E. Select the Quick Access feature (K READ Messages?).

This option is used to view and manage any SMS messages that have been sent to your phone number.

When selected, this option will display a message indicating the total number of messages and how many of these are new. If there are no messages

If there are messages, the new messages will be displayed first, followed by the old. Repeated presses of the

who sent it (if available). Once you have read a new message it will automatically become old.

See ‘How to Read SMS Messages’ for more information on navigating through the messages. Press the

Delete Message

This option will delete the currently viewed message

ª keys will display the whole message, when it was sent and the phone number

O key, when viewing any message, to enter the sub-menu.

No Messages will be displayed.

Using the Options Menu

Reply to Message

This option allows you to reply with a message.

Return Call

This option can be used to call the person who sent you the message, if their number has been

included by the network, or a number that has been included in quotes “” in the message.

Edit Message

This option allows you to use the Message Editor to edit the selected message and then to either send the modified message and/or store it in your Outgoing Messages list. See ‘How to Create and Edit SMS Messages’ for more information on using the Message Editor.

Go to Next Message

This option will display the next received message. If you are currently reading the last message in your list then this option will take you back to the

top of the list.

Delete All Messages

This option allows you to delete all received messages whether they have been read or not.

AOnce deleted, messages are NOT retrievable.

Outgoing Messages

i Press E. Select the Quick Access feature (U Outgoing SMS?).

This option is used to view and manage any outgoing messages. These messages will be stored on your SIM card. When you select this option, the total number of messages will be displayed followed by the first message in the list.

AYou cannot send an outgoing message until the Message Service Centre number has

been set. See ‘Message Settings’.

Press the O key, when viewing any message, to enter the sub-menu. See ‘How to Read SMS Messages’ for more information on navigating through the messages.

Send Message

This option allows you to add the destination phone number using a sub-menu. Using the scroll keys you can select: Enter Number - this allows you to manually enter the phone number using the keypad and send the message. Find Entry by Name - this allows you to recall a phone number from the Phone Book by name and send the message (see ‘Find Entry by Name’ in the ‘Phone Book’ section). Find Entry by Location - this allows you to recall a phone number from the Phone Book by location and send the message (see ‘Find Entry by Location’ in the ‘Phone Book’ section).

Edit Message

This option allows you to use the Message Editor to edit the selected message and then to either send the modified message or store it in your Outgoing Messages list. See ‘How to Create and Edit SMS Messages’ for more information on using the Message Editor.

Delete Message

This option will delete the currently viewed message.

Go to Next Message

This option will display the next outgoing message.

Using the Options Menu

Message Editor

i Press E. Select the Quick Access feature (a Message Editor?).

The Message Editor is used to edit the currently selected message and then to either send the

modified message or store it in your Outgoing Messages list. See ‘How to Create and Edit SMS Messages’ for more information on using the Message Editor.

Cell Broadcast

This option is used to set the cell broadcast settings. The option has two settings On or Off. If you change the setting to

information from. Please contact your Cellular Service Provider for a list of available channels and the information

they provide. While a broadcast message is scrolling across the display you can stop and start it by pressing

On, you will be asked to enter the channel you wish to receive

<. Press > to restart the message from the beginning. If you want to remove the message

from the display, press

AIf you need to use the < and > keys for their normal functions while you are

receiving a cell broadcast message, you must first remove the message.

Message Settings

Voicemail Number

This option is used to enter a phone number which will be used by the ‘Call Voicemail’ option. If there is already a Voicemail Number, this will be shown in the display. This can be used, modified or deleted as desired.

ARemember to add the + symbol and the appropriate country code prefix to the phone

number.

Service Centre

Before you can send any messages you must use this option to enter your Message Service Centre number. This number is obtained from your Cellular Service Provider. If there is already a Message Service Centre number, this will be shown in the display. This can be used, modified or deleted as desired.

ARemember to add the + symbol and appropriate country code prefix to the phone

number.

Expiry Period

You can use this option to specify the maximum time, in hours, that your unforwarded messages are to remain with the Message Service Centre before being deleted. When you select this option, the current expiry period will be displayed (the default is 24 hours). The maximum value you can enter is 10584, though the real limit will depend on your Message Service Centre.

Outgoing Message Type

This option is network dependent and can be used to specify the format of your outgoing messages. You can select from the following message types:

Paging, E-Mail, ERMES or Voice.

AYou do not need to select Voice to send messages to Voicemail boxes.

Text (default), Fax, X400,

Using the Options Menu

Phone Setup Menu

Select Phone Line

i Press E. Select the Quick Access feature (d Switch Line 1/2?) or after the tone.

This option allows you to switch between Line 1 and Line 2.

AAvailability depends on the type and settings of the SIM card, and/or your

subscription to this feature.

AThis feature is not available when you are using the GSM 900 band.

Adjust Ring Volume

This option is used to set the incoming call ring tone volume. The volume will be displayed as follows: Adjust the volume by pressing the volume buttons on the side of your phone.

Using the Options Menu

i Press E followed by the volume button to either increase or decrease the ringer

volume.

j Ring or Vibrate

i Press E. Select the Quick Access feature (L Vibrate On/Off?).

This option sets the way your phone alerts you to an incoming call. The options are:

• Ring Only - the phone will ring with the tone specified by the Set Ringer Tone option.

• Vibrate Only - the phone will vibrate using VibraCall™.

• Vibrate Then Ring - the phone will vibrate twice and then ring.

• No Ring or Vibrate - the phone will just display the Call message.

AThe setting you choose also defines the type of alert for an incoming SMS message

(except that if you select Vibrate Then Ring, your phone will just vibrate).

j Set Ringer Tone

This option sets the tone your phone will make when an incoming call is received on Line 1.

Standard Tone

Your phone makes a standard ringing tone.

Single Ring Tone ... Music Tone

When selected, your phone will produce one of these alternative ringer tones.

AIf you select the Single Ring Tone option, the phone will only ring once when a call is

received.

j Set Ringer Tone 2

This option sets the tone your phone will make when an incoming call is received on Line 2.

AThis option will not appear if you do not subscribe to Line 2.

j Set Message Alert Tone

This option sets the tone your phone makes when it receives an SMS message.

Standard Tone

Your phone makes a standard SMS alert tone.

Single Ring Tone ... Music Tone

When selected, your phone will produce one of these alternative SMS alert tones.

AIf you select the Single Ring Tone option, the phone will only ring once when it

receives a SMS message.

Quick Access Setup

This option allows you to do the following:

• Customise your Quick Access menu.

j Phone Lock

i Press E. Select the Quick Access feature (H Lock Now?).

This option is used to set, and change, the unlock code. The unlock code can be set to protect your phone from unauthorised use. It can be set to

Using the Options Menu

automatically lock your phone each time it is switched on. The unlock code is a four digit number which is set at manufacture to 1234. This can be changed

at any time by using the ’change unlock code’ option.

Automatic Lock

This option can be used to automatically lock your phone each time it is switched on. The option has two settings,

On or Off.

Lock Now

This option can be used to immediately lock your phone. Once selected, your phone will be unusable until the unlock code is entered.

Change Unlock Code

This option is used to change the unlock code. After selecting this option, you will be asked to enter the current security code before you can proceed. You can now enter a four digit code to replace the old code.

ABy pressing the $ key, you can access this option even when the phone is locked.

Adjust Contrast

i Press E. Select the Quick Access feature (© Adjust Contrast?).

This option is used to adjust the screen contrast. The contrast is displayed as follows: Adjust the contrast by pressing

O or C on the keypad will end the contrast

Pressing adjustment.

< or > on the keypad.

Set Lighting Color

This option allows you to select one of three display lighting colors. You can set the color to red, green or yellow.

Require SIM Card PIN

This option is used to set, and change, the PIN code. The PIN code can be set to protect your SIM card from unauthorised use. If set to

your SIM card will be restricted each time it is inserted or the phone is turned on. The option has two settings,

On or Off.

AIf the SIM card does not support PIN code disabling, these items will not appear.

Change SIM PIN Code

This option is used to change the SIM card PIN code. The ’Require SIM Card PIN’ option must be set to

you can proceed. You will be asked to enter a new, four to eight digit code to replace the old PIN code. The new PIN code must be entered again as confirmation.

On and you must enter the old PIN code before

! If the PIN number is entered incorrectly three times in a row, your SIM card will

automatically lock-up and the Blocked message will be displayed.

On, access to

Using the Options Menu

Unblocking Your Phone

If you receive the Blocked message you will need to enter an unblock code and key sequence before you can use the phone.

AThe 8 digit PIN unblocking code will have been provided with your SIM card by your

Cellular Service Provider.

Enter the following key sequence to unblock your phone:

<<05<EO FOFO.

The new PIN code must contain four to eight digits.

! If this operation is performed incorrectly 10 times in a row, your SIM card will

become permanently blocked.

Change SIM PIN2 Code

This option is used to change your PIN2 security code. When you select this option you must enter the old PIN2 security code before you can proceed. You will be asked to enter a new, four to eight digit code to replace the old PIN2 security code. The new PIN2 security code must be entered again as confirmation.

! If the PIN2 security code is entered incorrectly three times in a row, the

Blocked message will be displayed.

When the Blocked message is displayed, you are not allowed access to menu items that

require you to enter the PIN2 code, for example ‘Setup Fixed Dialling’ and ‘Call Charge Settings’. If you receive the

unblock and change the code using the following key sequence:

Blocked message when you try to enter your PIN2 code, you will need to

<<052<EO JOJO A

The 8-digit unblocking code will have been provided with your SIM card by your Cellular Service Provider.

! If the PIN2 unblocking operation is performed incorrectly 10 times in a row,

your PIN2 code will become permanently blocked.

j New Security Code

The security code is used to control access to security and other options within the menus. This option is used to change the security code, which is set at manufacture to 000000. Once selected, you will be asked to enter the current security code before you can proceed. You will then be asked to enter a new, six digit code to replace the old security code.

AIn order to safeguard your phone, you should change your security code from the

factory setting as soon as possible.

j Extended Menus

i Press and hold $. Extended Menus will be temporarily activated until you exit the

Options menu.

This option is used to switch the extended menus on or off. If the extended menu option is switched off, you will not be able to access any of the extended features. The option has two settings,

On or Off.

Using the Options Menu

Show Time and Date

i Press E. Select the Quick Access feature (¥ Show Time/Date?).

When selected, this option displays the time and date until any key is pressed.

j Set Time and Date

This option is used to set the time and date. You will be prompted to Enter Time - the time must be entered in 24-hour format. You will then be prompted to

Enter Date.

j Set Time Format

This option is used to set the clock to either 12-hour or 24-hour format.

j Language Selection

This option is used to change the language for display messages. The option has multiple settings. When you select a language, all further display prompts and help messages will be in the selected language.

Battery Saving Mode

This option can help you to conserve battery power by activating DTX (Discontinuous Transmission), turning the status indicator off, and deactivating the backlight for incoming Cell Broadcast messages. The option has two settings,

On or Off.

j Select Keypad Tones

This option allows you to change or disable tones you hear when you press a key. The option has three settings,

Normal Tones, Single Tone or No Tones .

Color Tagged Phone Book

This option is used to attach color tags to any of the Phone Book numbers in your phone memory

for easy classification and identification of entries. See ‘The Phone Book Menu’ for more details.

Phone Status

Status Review

This option can be used to view the current setting of menu options. When selected, your phone will display a list of menu items which have been changed from the default setting. Press the

Master Reset

! This option should be used with caution.

This option is used to restore certain phone options to their original settings. When selected, you will be asked to enter the security code. Once entered, the master reset option will perform the following operations:

• Cancel Automatic Answer, Audible Call Timers, In-Call Display Meter, Battery Save (DTX), Auxiliary Alert, Automatic Handsfree, Automatic Lock, Cell Broadcast and Talk and Fax Mode.

• Return Language Selection to Original.

• Restore Keypad Tones to Normal, Ringer Tones to Standard, SMS Alert Tones to Standard, Volume Level to Medium and Network Search frequency to Medium.

$ key to view the next item.

Using the Options Menu

• Restore Extended Menus to their default settings.

• Return the band selection to the default setting.

Master Clear

! This option should be used with extreme caution, for example it will clear all

the Phone Book entries from your phone memory.

This option is used to restore certain phone options to their original settings. When selected, you will be asked to enter the security code. Once entered, the master clear

option will perform the same operations as ’Master Reset’, plus the following operations:

• Clear the Phone Book entries from phone memory (not from SIM memory)

• Clear the Last Calls Made and Last Calls received list

• Clear the Message Editor

• Reset the Resettable Call Timers.

Master Clear does not clear the:

•Fixed Dial list

• My Number(s) list

• Charge Meters

• Received and Outgoing Messages list

• Voicemail number

• SMS Service Centre number

• Lifetime timer.

Using the Options Menu

Network Selection Menu

Network Selection

In order for the phone to make and receive phone calls, it must register with one of the available networks. These can be either GSM 900, GSM 1800 or combined GSM 900/1800 types of network.

Your phone automatically searches for the last network used. If, for any reason, this network is unavailable, your phone will attempt to register with a new network.

When your phone needs to register with a new network, it will generate a sorted list of networks.The network list is sorted in the following order:

• The Home network.

• Networks from a preferred list.

• A random list of other networks found above a certain signal strength.

• All remaining networks in descending order of signal strength. Any forbidden networks, stored in the SIM card, will not be included in the second list.

Change Band

This option allows you to choose the band you prefer. If your phone is not able to connect to a network after changing band, use Available Networks.

Using the Options Menu

Available Networks

When selected, this option will scan to see which networks are operating in your current location. When the scan is complete, press the a network you wish to register with or store in your preferred list, press the now enter the ’Register Now’ and ’Make Preferred’ sub-menu.

Once selected, your phone will try to register with the selected network. If the registration fails, your phone will try to register in the normal way.

Make Preferred

Once selected, you will be asked where the selected network is to be located in the preferred list.

$ key to scroll through the list. When you see

O key. You will

Network Search

These options determine how often your phone tries to register with a network and how the attempt is made.

Registration Preferences

This option determines how the phone tries to register with a network. The option has two settings,

Automatic Search Mode

In the automatic mode, the phone will try to register with the first network in the sorted list. If this is successful, your phone will display the network name and then enter the standby mode. If registration is unsuccessful with one network in the list, your phone will try the next listed network. If your phone fails to register with any of the listed networks, it will start at the beginning of the list after a preset period. The preset period is determined by the ’Frequency Of Search’ option.

Manual Search Mode

In the manual mode, the phone will present you with the sorted list of networks. Use the <,

> and O keys to select one network from the list. Your phone will try to register with the

selected network. If this is successful, the phone will display the network name and then enter the standby mode. If registration is unsuccessful, your phone will present the list again after a preset period. The preset period is determined by the ’Frequency Of Search’ option.

Frequency of Search

This option is used to determine how long your phone waits before attempting to re-register after a registration attempt has failed. The option has the following settings:

Continuous Search.

! Fast and Continuous Search may use up a significant amount of battery power.

j Preferred Networks

Add Network to List

This option enables you to add networks to your preferred list. When selected, the ’Choose From Available’ option will scan to see which networks are

operating in your current location. When the scan is complete, press the through the list. When you see a network you wish to store in your preferred list, press the key. You will be asked where the selected network is to be located in the preferred list.

Automatic Search or Manual Search.

Slow Search, Medium Search, Fast Search or

$ key to scroll

Using the Options Menu

The ’Choose From Known’ option will, when selected, present you with a preset list of networks. Press the preferred list, press the in the preferred list. Select the ’Add New Network Code’ option to enter network codes directly. Once entered, you will be asked where the network is to be located in the preferred list.

$ key to scroll through the list. When you see a network you wish to store in your

O key. You will be asked where the selected network is to be located

Show List of Networks

This option is used to display the networks you have stored in your preferred list. In addition, pressing the menu. When ’Move to New Location’ is selected you will be asked to enter a new location for the selected network. When selected, ’Delete Selection’ will remove the selected network from the preferred list.

O key will select the currently displayed entry and enter a move/delete sub-

Find New Network

When selected, the phone will try to register with a network in the normal manner, with one exception. When the registration attempt is made, your current network will be excluded from the list of those available. If the attempt fails, your phone will then try to re-register with the previous network.

Using the Options Menu

Call Meters Menu

Call Metering

Your phone has an internal metering system which can be used to provide you with individual and total call times or costs.

ACall cost information is only available if you receive the Advice of Charge service. If

you do not receive this service, then only time meters are available.

The meter can be displayed during a phone call and audible tones can be generated to indicate the passage of call time.

Your phone can handle values up to 21 digits long, although during calls it can only display the last 12 digits. If the value exceeds 21 digits, then

In addition, you can set a maximum charge limit so that your phone will monitor either the number of units used or the call cost, and then not allow the limit to be exceeded.

Too Large is displayed.

Show Call Charges

This feature allows you to display the cost of your calls or the amount of credit remaining. The figures are in phone units or currency depending on the setting of the option.

Set Charge Type

AShow Call Charges is only available if you receive the Advice of Charge service.

Using the Options Menu

Show Last Call

i Press E. Select the Quick Access feature (X Call Charge?).

Displays the cost of your last chargeable call.

Total For All Calls

Displays the cost of all your chargeable calls since the charge meters were reset to zero using the

‘Reset Call Charges’ option.

Credit Remaining

i Press E. Select the Quick Access feature (£ Show Credit?).

Displays the difference between your total call costs and the limit specified by the ‘Set Total Charge Limit’ option. If there is no limit,

No Charge Limit Set will be displayed.

Show Call Timers

This feature allows you to display the duration of your calls and to reset your time meters to zero. If you receive the Advice of Charge service then all calls are timed. If you do not receive the

Advice of Charge service then, depending on the model, either all calls or only outgoing calls are timed.

Show Last Call

i Press E. Select the Quick Access feature (Y Call Timer?).

Displays the duration of your last call.

Total For All Calls

Displays the duration of all your calls since the time meter was reset to zero using the ‘Reset All Timers’ option.

Reset All Timers

Sets the resettable time meters to zero. The Lifetime Meter is not resettable.

j Set Audible Call Timers

Your phone provides two programmable audible call timers:

• The 'Single Alert Timer' will sound a beep just once during a call, after a preset time has elapsed.

• The 'Repetitive Timer' will sound regular beeps during a call, at preset intervals.

In both cases, the timers will sound their beeps ten seconds before the end of the programmed time.

Set In-Call Display

This feature allows you to specify whether the time or charge meters are displayed during a call. If you do not have the Advice of Charge service, then only the time meter is available.

AIf a total charge limit has been set, then the in-call display always shows your

remaining credit.

Show Time Per Call

This option is used to display the time meter during calls. If you receive the Advice of Charge service, only the chargeable calls will be displayed.

Using the Options Menu

Show Charge Per Call, Show Total Call Charges

AThese menu items are only available if you receive the Advice of Charge service.

These options are used to display the call charges meter during and after chargeable calls. The

meter shows phone units or currency depending on the setting of the ‘Set Charge Type’ option.

No In-Call Display

This option switches off in-call display of the charge/time meter.

Call Charge Settings

This feature allows you to customise your Advice of Charge settings. You will be prompted to enter your PIN2 security code before you can access the options.

AThis menu item is only available if you receive the Advice of Charge service.

Reset Call Charges

This option resets your charge meters to zero.

Set Total Charge Limit

This option sets the maximum limit for call charges; once this limit has been reached, the network will refuse any further chargeable calls.

If you switch the charge limit either units or currency depending on the setting of the must be entered as whole numbers.

On, you will be prompted to enter a new limit. Enter the amount as

Set Charge Type option. Units

AWhen the charge limit is On, you will not be able to make fax or data calls.

Once a limit is set, the in-call display will show the remaining credit. When you reach your last two minutes, the warning message warning alert will sound. The sound will be repeated when one minute remains. When the limit is reached the message to make any more chargeable calls. Once the limit is reached the Total Charge Limit will need to be reset or switched off before any chargeable calls can be made.

Off to switch off the charge limit.

Select

Charge Limit Reached will be displayed and you will not be able

Approaching Charge Limit will be displayed and a

Set Charge Type

This option defines whether charge information is displayed as either phone units or currency.

Units

Sets the charge type to phone units.

Currency

Sets the charge type to currency. You will be prompted to enter the Currency Name. Enter a 3-character notation, for example GBP for the UK, DEM for Germany or FFR for France. You will then be prompted for the

Charge Per Unit. Enter the amount and press O.

Lifetime Timer

This option is used to display the total time of all calls made on your phone. This meter can not be reset, the

Clear

options have no effect.

Reset All Timers, Master Reset or Master

Using the Options Menu

Accessory Setup Menu

You will only be able to access this menu when your phone is mounted in a car kit or when a headset accessory is attached.

Car kits can provide charging facilities and some provide connection to an external antenna for better reception.

Your phone can also be linked to external microphones and speakers for hands free operation, and provides several options to complement the use of car kits.

j Mute Car Radio

This option can be used to mute your car radio when you make, or receive, a call when your phone is attached to the car kit. It must be enabled by your local dealer. This option has two settings,

AThis option will have no effect if your car radio does

not have a mute feature, or if the car kit installation does not support this option.

Automatic Answer

This option allows your phone to automatically answer an incoming call after two rings.

This option has two settings,

AIf this option is On, we recommend that the ’Ring or

Vibrate’ option be set to Ring Only.

Automatic Handsfree

This option is used in conjunction with the ’Automatic Answer’ option and a car kit, to transfer call conversation to external microphones and speakers. It is available only with selected car kits. Contact your Motorola representative for further details. This option has two settings,

Safety Timer

This option can be used to keep the phone on for a set period after the vehicle ignition has been turned off. This prevents the vehicle’s battery from becoming drained and saves you from having to re-enter PIN and Unlock codes after every short stop. As standard the ’Safety Timer’ is set to 60 minutes. Once selected, this option can be adjusted to any value between zero and 999 minutes. When set to zero, this option is effectively switched off.

Auxiliary Alert

This option allows your phone to alert you of an incoming call by flashing your vehicle lights, or by sounding the horn. It must be enabled by your local dealer.

ASome local regulations prevent the use of this option and, accordingly, this option

may not be present on your phone.

On or Off.

Using the Options Menu

Using the Quick Access Menu

AThe menu shown above represents the default setting

supplied with your phone.

lthough the features in your phone are available through easy

access menus, some of the most commonly used features are also available in the Quick Access menu. Each feature in the menu is allocated a number from 1 to 9.

To use a Quick Access feature, you can use any of the following methods:

You can change the features, and the positions of the features,

available in the Quick Access menu - see ‘Customising the Quick Access Menu’.

Each Quick Access feature is represented by an icon as well as the feature name. The currently selected icon is shown with a dark background.

B Find Name?

You will be prompted to Enter Name. Enter the first three characters of the name and press in the Phone Book will be displayed. Press number.

T Add to SIM?

You will be prompted to enter a phone number and then a name.

AIf you already had a number displayed, it will

automatically be re-displayed when you select this feature.

The number will be stored in the next available SIM card location. See ‘Add Entry’ for more information.

G Battery Meter?

A bar graph indicating the approximate battery charge level will be displayed. The more bars displayed, the greater the charge level.

See ‘Show Battery Meter’ for more information.

J Mute Phone?

Temporarily turns the microphone off during a phone call. Reselect this option to resume your conversation.

K Read Messages?

Your newest message will be displayed; you can then read, delete and edit messages as normal. See ‘Received Messages’ for more information.

L Vibrate On/Off?

VibraCall™ will be switched either on or off depending on the current setting. If VibraCall™ is switched on, the ‘Ring or Vibrate’ setting changes to off, the ‘Ring or Vibrate’ setting changes to information.

O. The first matching entry

O to call the

Vibrate Only. If VibraCall is switched

Ringer Only. See ‘Ring or Vibrate’ for more

Using the Quick Access Menu 61

P Divert On/Off?

Unconditional voice call diversion will be switched either on or off depending on the current setting. This will allow Fax and Data diversion to remain enabled independent of the Voice Call Diversion setting.

AYou must have defined a diversion number using the ‘Divert All Voice Calls’ option in

the Call Diverting menu in order to use this feature.

AYou cannot switch call diverting on or off if you are outside network coverage.

D Find Location?

You will be prompted to Enter Location. Enter the location number and press O. The first matching entry in the Phone Book will be displayed. Press

O to call the number.

F Add to Phone?

You will be prompted to enter a phone number and then a name.

AIf you already had a number displayed, it will automatically be re-displayed when you

select this feature.

The number will be stored in the next available phone memory location. See ‘Add Entry’ for more information.

R Call Voicemail?

Your phone will make a call to your voicemail number.

AYou must have defined a Voicemail number in order to use this feature.

See ‘Call Voicemail’ for more information.

H Lock Now?

Immediately locks your phone, you will not be able to use your phone until the unlock code is entered. See ‘Phone Lock’ for more information.

N Adjust Ring?

This option is used to display and to set the incoming call ring tone volume.

V Switch Memory?

Switches one-touch dialling between the phone and SIM memories depending on the current setting.

U Outgoing SMS?

Your newest message will be displayed; you can then read, send, delete and edit messages as normal. See ‘Outgoing Messages’ for more information.

a Message Editor?

The last message that was edited will be displayed. Press and hold C to clear the message and start a new one, or modify the message displayed. See ‘How to Create and Edit SMS Messages’ for more information.

W Received Calls?

Displays the first entry in the Last Calls Received list. You can scroll through the list and call the numbers as normal. See ‘Last Calls Received’ for more information.

X Call Charge?

Displays the cost of your last chargeable call. See ‘Show Call Charges’ for more information.

Y Call Timer?

Displays the duration of your last chargeable call. See ‘Show Call Timers’ for more information.

Using the Quick Access Menu

c Restrict My ID?

Your phone number will not be sent with the next attempted call; after this your phone number will be sent until you reselect this option.

d Switch Line 1/2?

Allows you to switch between Line 1 and Line 2.

AAvailability depends on the type and settings of the SIM card, and/or your

subscription of this feature.

e Show Service?

Displays a list of phone numbers and services provided by your Cellular service provider.

AAvailability depends on the type and settings of the SIM card, and/or your

subscription of this feature.

¥ Show Time/Date?

Displays the current time and date.

£ Show Credit?

Allows you to quickly display the Credit Remaining.

AThis will only show the credit remaining if you receive the Advice of Charge service.

¤ Find New Network?

Allows you to quickly search for a new network.

Allows you to adjust the screen contrast.

Change Band?

Use this option to change the band of operation for your phone. See Network Selection Menu for more information.

Using the Quick Access Menu 63

Customising the Quick Access Menu

You can change the features in the Quick Access menu to suit your personal preferences. To customise the menu, you can use either the Quick Access Setup menu or you can do the

following:

1 Press E and scroll to the menu item you wish to change. 2 Press and hold O to access the list of features available. The currently selected

feature will be displayed.

3 Scroll through the list until you find the feature you wish to store in the Quick Access

menu; press

4 Completed will be displayed to confirm that the feature has been stored.

The following items are in the Quick Access list:

• Find by Name

• Find by Location

• Add Entry to Phone

• Add Entry to SIM

• Call Voicemail

• Battery Meter

• Phone Lock Now

• Phone Mute On or Off

• Ring Volume

• VibraCall On or Off

• Switch Memory

• Read Messages

• Outgoing Messages

• Message Editor

• Last Calls Received

• Last Call Charge

• Last Call Timer

• Switch Line 1/2*

• Show Service*

• Restrict My ID

• Divert Voice Call

• Show Time and Date

• Credit Remaining

• Find New Network

• Adjust Contrast

• Change Band

*Availability depends on the type and settings of the SIM card, and/or your

subscription of this feature.

Using the Quick Access Menu

Accessories

The following accessories have been designed to work with your phone. Additional accessories may be available and are packaged separately. Please refer to your local service provider or retail outlet for more information.

Desktop Charger

The Desktop Charger allows you to charge a battery fitted in a phone and a spare battery at the same time. The charging status for each battery is indicated by LEDs at the front of the charger.

AThe Desktop Charger must be used with the Power Adapter.

Power Adapter

The Power Adapter (charger) connects to the Desktop Charger or directly to the phone. When connected directly to the phone, it charges the battery and also provides dead battery operation.

Standard travel charger does not require adaptor.

Cigarette Lighter Adapter

The Cigarette Lighter Adapter connects to your phone and allows you to charge your phone’s battery while driving. When the phone is in use, the adapter overrides the battery therefore preserving battery life. The adapter also provides dead battery operation.

PC Cards

CELLect™1 CELLect™3

Both PC Cards allow you to send and receive data and fax calls using your phone and a computer with a PCMCIA Type II slot. Both PC cards also allow you to manage your phone book and send SMS messages direct from your PC with the supplied software.

The CELLect™3 card also contains a landline modem for connection to the conventional telephone network. This gives you both wired and wireless connection options in a single PC card.

AA cable is required to connect the PC Cards to the phone.

Personal Handsfree System

The Personal Handsfree System allows you to use your phone handsfree.

Belt Clip

The Belt Clip holds the phone while being worn on your belt.

ATo use the belt clip, you must remove the rubber plug from the rear housing.

Vehicle Handsfree System

The Standard Vehicle Handsfree System includes a phone holder and battery charger, and provides handsfree operation.

AThese accessories require professional installation.

Accessories 65

Accessories

What to do if...

You can’t switch your phone onCheck the battery. Is it charged, properly fitted and are

the contacts clean and dry? See ‘Important Battery Information’.

You can’t make calls Check the signal strength meter in the display. If the

signal is weak, move to an open space or, if you are in a building, move closer to a window.

Check the Network Selection settings. Try Manual

Selection, or try another network. See ‘Network Search’.

Check your Operator coverage map.

Is Restricted displayed? Check the Call Barring and

Fixed Dialling settings.

Has the call charge limit been reached? Use your PIN2 code to reset the limit or contact your Service Provider. See ‘Set Total Charge Limit’.

Has a new SIM card been inserted? Check that no new restrictions have been imposed.

You can’t receive calls Check the signal strength meter in the display. If the

Your phone won’t unlock Have you inserted a new SIM card? Enter the new PIN

Your PIN is blocked Enter the PIN unblocking code supplied with your SIM

Your PIN2 is blocked Enter the PIN2 unblocking code supplied with your SIM

Your SIM card won’t work Is the card inserted the right way round? See ‘SIM Card

signal is weak, move to an open space or, if you are in a building, move closer to a window.

Check the Call Diversion and Call Barring settings.

Check the Ringer and VibraCall™ settings. If both are

off, there is no audible alert. See ‘j Ring or Vibrate’.

code. See ‘Entering Your SIM Card PIN Code’.

Do you have a replacement phone? Enter the default phone unlock code - 1234.

Have you forgotten the unlock code? Press change the unlock code (you will need your security code).

card (see ‘Unblocking Your Phone’).

card (see ‘Change SIM PIN2 Code’).

Insertion/Removal’.

Is the gold chip visibly damaged or scratched? Return the

card to your Service Provider.

Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.

$ to

What to do if... 67

The battery won’t charge Check the charger. Is it properly connected? Are its

The battery icon and meter are missing

The battery drains faster than normal

You can’t cancel Call Diverting or Call Barring

o symbol is flashing

The

I can’t make international calls

contacts clean and dry? See ‘Your Battery’.

Check the battery contacts. Are they clean and dry?

Check the battery temperature. If it is warm, let it cool

before recharging.

Is it an old battery? Battery performance will decline after several years use. Replace the battery.

Are you using a Motorola original battery? Your charging system may not be able to communicate with your battery. See ‘Your Battery’.

Are you in an area of variable coverage? This uses extra battery power.

Is it a new battery? A new battery will need two to three charge/discharge cycles to attain normal performance.

See ‘Charging a New Battery’

Is it an old battery? Battery performance will decline after several years use. Replace the battery.

Is it a battery that hasn’t been completely discharged? Allow the battery to fully discharge (until the phone turns itself off) and then charge the battery overnight.

Check that the Frequency Of Search feature in the Network Selection menu has not been set to Fast or Continuous. See ‘Network Search’.

Check that the Battery Saving Mode feature has not been set to Off.

Are you using your phone in extreme temperatures? At

extreme hot or cold temperatures, battery performance is significantly reduced.

Wait until you are in an area with good network coverage and try again.

There is not enough memory available to store another SMS message. Use the Messages menu to delete one or

more existing messages.

Some Service Providers automatically bar the ability to make international calls. Contact your Service Provider.

Have you included the relevant codes? Press and hold

0 key to display the international dialling prefix

the

+) and then enter the appropriate country code

( followed by the phone number.

What to do if...

Index

Accessories ...............................................65

Accessory setup menu ..............................60

Add entry

To phone memory .........................35, 62

To SIM card memory .....................35, 61

Adjust Contrast ..................................50, 63

Adjust ring volume ...................................48

Alert tones ................................................49

Automatic answer ....................................60

Automatic Handsfree ................................ 60

Automatic lock .........................................50

Automatic redial .......................................22

Auxiliary alert ............................................60

Available networks ...................................55

Bar incoming calls .....................................42

Bar outgoing calls .....................................42

Batteries

Charging .............................................16

Desktop charging ................................18

Fitting ..................................................17

Low battery warning ...........................16

Maintaining .........................................16

Removing ............................................17

Battery charge indicator ............................14

Battery meter ...................................... 39, 61

Battery saving mode .................................52

Blocked message ................................21, 51

Buttons

Smart button .......................................13

Volume ...............................................13

Call charge settings ..................................59

Call diverting ......................................40, 62

Call holding ..............................................27

Call metering ............................................57

Call meters menu ..................................... 57

Call related features menu ........................ 39

Call timers ................................................58

Call Transfer .............................................30

Call Voicemail ...........................................45

Call waiting ..............................................27

Calling a number ......................................22

Cancel all diverting .............................41, 62

Capacity

Checking battery capacity ....................39

Checking Phone Book capacity ............ 36

Cell broadcast .......................................... 47

Battery saving mode ............................ 52

Messages ............................................ 44

Change band .....................................54, 63

From the default (1900) ................54, 63

From the default (900/1800) ......... 54, 63

Change bar password ..............................43

Change SIM PIN2 code .............................51

Change unlock code ................................ 50

Characters ................................................ 34

Charge meters

Resetting ............................................. 59

Check capacity (of the Phone Book) .......... 36

Color Tagged Phone Book ........................ 33

Conference Call ....................................... 25

Call Waiting ........................................ 30

End Active And Held ........................... 25

Hold Call .............................................25

Make a New Call ................................. 25

Reconnect ........................................... 26

Reconnect Held Call ............................26

Restrict My Number ............................. 25

Split Call .............................................. 26

Switch Calls .........................................25

Contrast

Adjust Contrast ............................. 50, 63

adjusting .............................................63

Delete

Last ten calls ........................................ 37

Message ........................................ 45, 46

Phone book entries ............................. 35

Desktop charging of your battery .............18

Detailed diverting .....................................40

Dialling phone book numbers ...................23

Display .....................................................14

Adjusting the contrast ................... 50, 63

Display characters .....................................34

Displaying your own phone number ......... 37

Divert

Cancelling ........................................... 41

Fax calls ............................................... 41

DTX .......................................................... 52

Earpiece connector ...................................15

Editing messages ...................................... 45

Emergency calls ........................................ 23

Index 69

Ending a phone call ..................................24

Entering characters ...................................33

Erase name and number ...........................35

Extended menus ...................................4, 51

Fault finding .............................................67

Find entry by location .........................35, 62

Find entry by name .............................34, 61

Find new network .....................................56

Fitting your battery ...................................17

Fixed dialling .............................................37

Calling numbers ..................................38

Setting ................................................38

Handsfree On/Off .....................................25

Headset

Making and receiving calls ...................13

Hold Call ..................................................25

In use symbol ............................................14

Initiating Transfer Call ...............................30

International phone calls ...........................23

Key Answer Only ......................................43

Language selection ...................................52

Last Calls Received ....................................36

Add to Phone Memory ........................37

Add to SIM Card Memory ....................37

Time and Date .....................................37

Last ten calls .......................................36, 62

Lifetime timer ...........................................59

Lock now ............................................50, 62

Low battery warning .................................16

Making a phone call .................................22

Master clear ..............................................53

Master reset .............................................52

Menus

Accessory setup menu .........................60

Call Diverting menu .............................40

Call meters menu ................................57

Call related features menu ...................39

Extended menu .....................................4

Messages menu ...................................44

Network selection menu ...................... 54

Options menu .....................................31

Personalised menus ...............................4

Phone Book menu ...............................32

Phone Setup menu .............................. 48

Quick Access menu .............................61

Send Messages menu ..........................46

Short menu ........................................... 4

Message editor ................................... 47, 62

Message settings ......................................47

Messages

Call holding/call waiting messages ....... 27

Cell broadcast messages ......................44

Creating and editing ...........................45

Reading SMS messages ....................... 45

Sending SMS messages ....................... 46

Messages menu .......................................44

My phone number(s) ................................ 37

Names

Entering .............................................. 33

Network search ........................................ 55

Network selection menu ........................... 54

Networks

Automatic search ................................ 55

Change band ................................ 54, 63

Finding new networks ......................... 56

Manual search ..................................... 55

New security code .................................... 51

One-touch dial setting ..............................38

One-touch dialling ..............................22, 62

Options menu .......................................... 31

Outgoing messages ............................46, 62

Pauses

Inserting into phone numbers ..............23

Personal numbers .....................................34

Personalised menu ..................................... 4

Phone book

Call number ........................................35

Capacity ..............................................33

Color Tagged ...................................... 33

Deleting/erasing entries ....................... 35

Dialling phone book numbers ..............23

Modify name or number ..................... 35

Preventing access to ............................ 36

Storing numbers - see Add Entry ......... 35

Phone calls

Automatic redial .................................. 22

Dialling phone book numbers ..............23

Index

Emergency calls ...................................23

Ending .................................................24

International ........................................23

Making ................................................22

One-touch dialling ...............................22

Receiving .............................................24

Phone Setup menu ...................................48

Phone status .............................................52

PIN code

Entering ..............................................21

Setting and changing ..........................50

PIN2 code .................................................51

Postscripting .............................................33

Prevent access (to Phone Book) .................36

Quick access menu ...................................61

Customising ........................................64

Reading SMS messages .............................45

Received messages ...................................45

Receiving a phone call ..............................24

Redialling the last number called ...............22

Removing your battery .............................. 17

Require SIM card PIN ................................50

Restrict My Number ..................................25

Restrict my phone number ..................39, 63

Return call ................................................46

Ring or vibrate ..........................................49

Ring tones ................................................49

Safety timer .............................................. 60

Screen

adjusting the contrast ..........................63

Security code

Changing ............................................51

Select Phone Line ......................................48

Sending SMS messages .............................46

Service centre ...........................................47

Set in-call display ......................................58

Set Message Alert Tone ............................49

Set Ringer Tone ........................................49

Set Ringer Tone 2 .....................................49

Set Time and Date ....................................52

Set Time Format .......................................52

Setup fixed dialling ...................................38

Short menu ................................................4

Short message service symbol ...................14

Show battery meter ............................39, 61

Show call charges ...............................57, 62

Show call timers ................................. 58, 62

Show Services .......................................... 36

Show Time and Date ................................ 52

Signal strength symbol .............................14

SIM card

Insertion/removal ................................. 19

PIN code ........................................21, 50

PIN2 code ............................................ 51

Smart button ............................................ 13

SMS messages ..........................................44

Special keys ..............................................13

Split Call ................................................... 26

Status indicator ........................................ 15

Battery saving mode ............................ 52

Status review ............................................ 52

Switch Calls ..............................................25

Symbols ...................................................14

Talk and fax .............................................41

Timers ...................................................... 58

Tones

Setting alert tones ............................... 49

Setting ringer tones .............................49

Transfer Call ............................................. 30

Transmission rate ......................................41

Troubleshooting .......................................67

Turn Mute On or Off ................................ 26

Unblocking your phone ............................ 51

Unconditional call diversion ......................62

Unlock code

Setting and changing ..........................49

VibraCall ............................................49, 61

Voicemail

Number ...............................................47

Volume

Adjusting the earpiece and

keypad volume .................................13

Adjusting the ringer volume ................ 48

Button ................................................. 13

What to do if... ........................................67

Index 71

Index

aOnly

Dummy matter

Motorola V2088 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual