A preliminary draft copy of the Users Manual follows:
EXHIBIT 8
Motorola T720
CDMA R2.1
Mobile Phone User’s Guide
FCC Submission Draft
February 18, 2002
PRELIMINARY
PRELIMINARY
Welcome
Welcome to the world of Motorola digital wireless
communications! We are pleased that you have chosen the
Motorola T720 wireless phone.
Headset Jack
Insert headset
accessory for
hands-free use.
Left Soft Key
Perform functions
identified by left
display prompt.
Power Key
& End Key
Turn phone on and
off, end phone
calls, exit menu
system.
Volume Keys
Adjust earpiece
and ringer volume.
4-Way
Navigation Key
Scroll through
menus and lists,
set feature values.
PRELIMINARY
Earpiece
Accessory
Connector Port
Insert charger and
phone accessories.
Display
Menu Key
Status Light
See incoming call
and service status.
Right Soft Key
Perform functions
identified by right
display prompt.
Voice Key
Record voice notes,
phonebook and
shortcut names.
Send Key
Send and answer
calls, view recent
dialed calls list.
Microphone
1
Personal Communications Sector
600 North U.S. Highway 45
Libertyville, Illinois 60048
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States)
1-800-461-4575 (Canada)
www.motorola.com
www.motorola.ca
MOTOROLA, the Stylized M Logo and all other trademarks indicated as
such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off.
All other product or service names are the property of their respective
owners.
The Motorola products described in this manual may include copyrighted
Motorola and third party software stored in semiconductor memories or
other media. Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any copyrighted
software contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to the
extent allowed by law. Furthermore, the purchase of the Motorola
products shall not be deemed to grant either directly or by implication,
estoppel, or otherwise, any license under the copyrights, patents, or
patent applications of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use that
arises by operation of law in the sale of a product.
menu layout. You or your service
provider may have changed the
menu layout or changed some
feature names. Not all features
may be available for all users.
For example , the Radio feature on
the main menu (left) is displayed
only when the optional FM Stereo
Radio Headset accessory is
plugged into the accessory
connector port on your phone
(see phone illustration, page 1).
Shortcuts
Change display zoom:
Press M, then
press and hold
Display my phone number:
Press M
Dial voicemail number:
Press and hold
Go to dialed calls list:
Press
N
Exit menu system:
Press
O
M
#
1
3
Settings Menu
✂
• Phone Status
• My T el. Number
• Active Line
• Battery Meter
• Other Information
• Connection
• Incoming Call
• In-Call Setup
• In-Call Timer
• Answer Options
• Security
• Phone Lock
• Lock Application
• Restrict Calls
• New Passwords
• Java T ools
• Java App Loader
• Java System
• Network Access
• Other Settings
• Personalize
• Main Menu
•Keys
• Greeting
• Banner
• Wallpaper
• Screen Saver
• Quick Dial
• Initial Setup
• Time and Date
• Auto PIN Dial
• Auto Redial
• Backlight
• Status Light
• Zoom
• TTY Setup
• Scroll
• Animation
• Language
• Contrast
• DTMF
• Master Reset
• Master Clear
• Network
• Car Settings
• Headset
PRELIMINARY
4
Contents
Menu Map
About This Guide
Safety and General Information
Getting Started
This user guide introduces you to the many features in
your Motorola wireless phone.
Navigating To a Menu Feature
You can access many of your phone’ s f eatures through the
menu system. This guide shows you how to navigate to a
specific menu feature as follows:
Find the Feature
The > symbol means that you should scroll to and select
the feature. This example shows that you must press
scroll to and select
Text Msgs
.
Messages
M
>
Messages
>
Text Msgs
, then scroll to and select
M
,
Optional Features
Features marked with this label are optional
network and/or subscription-dependent
features. These features may not be offered by
all service providers in all geographical areas.
Contact your service provider for more information.
Optional Accessories
Features marked with this label require the use of
PRELIMINARY
an optional Motorola Original™ accessory.
About This Guide
11
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT
OPERATION. READ THIS INFORMATION BEFORE USING
YOUR PHONE.
The information provided in this document supersedes the
general safety information contained in user guides published
prior to July 2000. For information regarding radio use in a
hazardous atmosphere please refer to the Factory Mutual
(FM) Approval Manual Supplement or Instruction Card, which
is included with radio models that offer this capability.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Operational Characteristics
Your phone contains a transmitter and a receiver. When it is
ON, it receives and transmits radio frequency (RF) energy.
The phone operates in the frequency range of 824 MHz to
849 MHz in analog and digital mode and 1851.25 MHz to
1908.75 MHz in digital mode.
When you communicate with your phone, the system handling
your call controls the power levels at which your phone
transmits. The output power level typically may vary over a
Safety and General Information
PRELIMINARY
12
range from ____ watts to ____ watts in analog mode and
____ watts to ____ watts in digital mode.
Exposure To Radio Frequency Energy
Your Motorola phone is designed to comply with the following
national and international standards and guidelines regarding
exposure of human beings to radio frequency electromagnetic
energy:
• United States Federal Communications Commission,
Code of Regulations; 47 CFR part 2 sub-part J
• American National Standards Institute (ANSI) / Institute
of Electrical and Electronic Engineers (IEEE) C95.
1-1992
• Institute of Electrical and Electronic Engineers (IEEE)
C95.1-1999 Edition
• National Council on Radiation Protection and
Measurements (NCRP) of the United States, Report
86, 1986
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of
Human Exposure to Radiofrequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999
• Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation-Human Exposure) Standard 1999
PRELIMINARY
To assure optimal phone performance and make sure human
exposure to radio frequency electromagnetic energy is within
Safety and General Information
13
the guidelines set forth in the above standards, always adhere
to the following procedures:
Portable Phone Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate FCC
regulations.
Do NOT hold the antenna when the phone is in use.
Holding the antenna affects call quality and may cause the
phone to operate at a higher power level than needed.
Phone Operation
When placing or receiving a phone call, hold your phone
as you would a wireline telephone. Speak directly into
the microphone.
Body-Worn Operation
To maintain compliance with FCC/Health Canada RF
exposure guidelines, if you wear a phone on your body when
transmitting, always place the phone in a Motorola-supplied or
approved clip, holder, holster, case, or body harness for this
product. Use of non-Motorola-approved accessories may
exceed FCC/Health Canada RF exposure guidelines. If you
do not use one of the Motorola-supplied or approved
body-worn accessories, and are not using the phone held in
the normal use position, ensure the phone and its antenna
are at least one inch (2.5 centimeters) from your body
when transmitting.
Safety and General Information
PRELIMINARY
14
Data Operation
When using any data feature of the phone, with or without an
accessory cable, position the phone and its antenna at
least one inch (2.5 centimeters) from your body.
Approved Accessories
For a list of approved Motorola accessories, visit our website
at
www.mot.com
.
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to
electromagnetic interference (EMI) if inadequately shielded,
designed, or otherwise configured for electromagnetic
compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility
conflicts, turn off your phone in any facility where posted
notices instruct you to do so. Hospitals or health care f acilities
may be using equipment that is sensitive to external RF
energy.
Aircraft
When instructed to do so, turn off your phone when on board
an aircraft. Any use of a phone must be in accordance with
applicable regulations per airline crew instructions.
Safety and General Information
Medical Devices
Pacemakers
The Advanced Medical Technology Association recommends
that a minimum separation of 6 inches (15 centimeters) be
PRELIMINARY
15
maintained between a handheld wireless phone and a
pacemaker. These recommendations are consistent with the
independent research by, and recommendations of, the
United States Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the phone more than six inches
(15 centimeters) from your pacemaker when the phone is
turned ON.
• NOT carry the phone in the breast pocket.
• use the ear opposite the pacemaker to minimize the
potential for interference.
• turn OFF the phone immediately if you have any reason
to suspect that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
want to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from RF energy . Your ph ysician ma y be able to assist
you in obtaining this information.
Safety and General Use While Driving
Check the laws and regulations on the use of phones in the
area where you drive. Always obey them.
Safety and General Information
16
PRELIMINARY
When using your phone while driving, please:
• give full attention to driving and to the road.
• use hands-free operation, if available.
• pull off the road and park before making or answering a
call if driving conditions so require.
Operational Warnings
For Vehicles With an Air Bag
Do not place a portable phone in the area over an air bag or in
the air bag deployment area. Air bags inflate with great force.
If a portable phone is placed in the air bag deployment area
and the air bag inflates, the phone may be propelled with
great force and cause serious injury to occupants of the
vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a
potentially explosive atmosphere, unless the phone is a model
specifically identified as being “Intrinsically Safe.” Do not
remove, install, or charge batteries in such areas. Sparks in a
potentially explosive atmosphere can cause an explosion or
fire resulting in bodily injury or even death.
Note: The areas with potentially explosive atmospheres
referred to above include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, areas
where the air contains chemicals or particles, such as grain,
dust, or metal powders, and any other area where you would
normally be advised to turn off your vehicle engine. Areas with
potentially explosive atmospheres are often but not always
posted.
PRELIMINARY
Safety and General Information
17
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn
OFF your phone when you are near electrical blasting caps, in
a blasting area, or in areas posted: “Turn off two-way radio.”
Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable phone that has a damaged
antenna. If a damaged antenna comes into contact with your
skin, a minor burn can result.
Batteries
All batteries can cause property damage and/or bodily
injury such as burns if a conductive material such as
jewelry, keys, or beaded chains touches exposed
terminals. The conductive material may complete an
electrical circuit (short circuit) and become quite hot. Exercise
care in handling any charged battery, particularly when
placing it inside a pocket, purse, or other container with metal
objects.
ITC01-101
PRELIMINARY
Safety and General Information
18
Getting Started
What’s in the Box?
Your wireless phone typically comes equipped with a
battery and a charger. Other accessory options can
customize your phone for maximum performance and
portability.
To purchase Motorola Original™ accessories, contact the
Motorola Customer Call Center at 1-800-331-6456 in the
United States or 1-800-461-4575 in Canada.
Installing the Battery
You must install and charge the battery to use your phone.
Your phone is designed to be used only with
Motorola Original batteries and accessories. We
recommend that you store batteries in their
protective cases when not in use.
Do This
1Remove the battery from its protective clear
plastic case.
Getting Started
PRELIMINARY
19
Do This
2If the phone’s
battery door is in
place, slide down
the release latch
and lift the door off
of the phone.
Release
latch
3Insert the battery,
printed arrows first,
into the battery
compartment and
push down.
4Insert the teeth at
the bottom of the
Getting Started
battery door into
the slot at the base
of the phone, then
push the door down
and snap it into
place.
Charging the Battery
New batteries are shipped partially charged. Before you
can use your phone, you need to install and charge the
battery, as indicated by the following instructions. Some
PRELIMINARY
20
batteries perform best after several full charge/discharge
cycles.
Do This
1Plug the
travel
charger into
your phone
with the
release tab
facing up.
2Plug the other end of the travel charger into the
appropriate electrical outlet.
3When your phone indicates that the battery is
fully charged (
release tab and remove the travel charger.
Note: When you charge the battery, the battery level
indicator in the upper right corner of the display shows how
much of the charging process is complete.
Release
tab
Charge Complete
), press the
Replacing the Convertible
Cover
Getting Started
You can replace the top cover on y our flip phone to
personalize its appearance.
PRELIMINARY
21
Your phone is designed to be used only with Motorola
Original accessories. See y our Motorola retailer for new or
replacement covers.
Do This
1Insert your
fingernail into the
slot at the base of
the flip cover, then
pull up and lift the
cover off the
phone
2Insert the tabs on
the top edge of the
new cover into the
slots at the top of
the flip, then push
the cover down
Getting Started
and snap it into
place.
Turning Your Phone On
Do ThisTo
1Open your phoneexpose the keypad
turn on your phone
2Press and hold
P
22
PRELIMINARY
Power
key
Do ThisTo
3If necessary, enter
your four-digit
unlock code and
press
OK
(+)
unlock your phone
The unlock code is
originally set to 1234. Your
service provider may
change this number
before you receive your
phone.
Sending a Call
To call a number, y our phone must be unlock ed and hav e a
network connection with adequate signal strength.
Do ThisTo
1Extend the
antenna
2Press the
keypad keys
3Press
Note: You can make an emergency call even when the
phone is locked. See page 34.
N
optimize signal reception
dial the phone number
Tip: If you make a mistake,
DELETE
press
last digit, or press and hold
DELETE
send the call
(-) to delete the
(-) to clear all digits.
PRELIMINARY
Getting Started
23
Ending a Call
PressTo
O
end the call
Receiving a Call
To receive a call, your phone must have a network
connection with adequate signal strength. If your phone is
locked, you must unlock it to answer the call.
When you receive a call, your phone rings and/or vibrates
and displays an incoming call message.
PressTo
N
or
ANSWER
(+)
Displaying Your Phone Number
Getting Started
From the idle display:
PressTo
M #
answer the call
see your phone number
24
PRELIMINARY
About Your Phone
See page 1 for a basic phone diagram.
Display
Some phone functions must be performed from the
display
, the standard display that you see when you are
not
on a call or using the menu.
Phone status indicators appear at the top of the idle
display, along with the name of your service provider, and
the current time.
Use the 4-way navigation key (S) to select a feature
represented by the icons in the center of the idle display, or
press
M
to enter the main menu.
Labels at the bottom corners of the display show the
current soft key functions.
idle
PRELIMINARY
About Your Phone
25
➍
➌
In Use
Indicator
➋
Digital/
Analog
Signal
Indicator
➊
Signal
Strength
Indicator
Clock
Phonebook
Messages
MicroBrowser
➊
Signal Strength Indicator Vertical bars show the
strength of the network connection. You cannot send or
receive calls when the
➋
Digital (F) or Analog (I) Signal
About Your Phone
Indicators Your service provider may use one
or both indicators to show whether you are
receiving a digital or analog signal.
➌
In Use Indicator Shows that a call is in progress.
PRELIMINARY
Roam
Indicator
Service Provider Name
4:00
SETTING
➓
Soft Key Labels
j
➍
Roam Indicator Shows that your phone
is seeking or using another network system
outside your home network.
➎
Message
Waiting
Indicator
pm
SHORTCUT
Menu
Indicator
(no signal) indicator is displayed.
➏
➐
➑
➒
Datebook
Voice
Message
Waiting
Indicator
Battery
Level
Indicator
Active
line
Indicator
Ring
Style
Indicator
26
➎
Message Waiting Indicator Appears when
you receive a text message.
➏
Voice Message Waiting Indicator Appears
when you receive a voicemail message.
➐
Battery Level Indicator V ertical bars show the amount
of charge left in your battery . Recharge the battery as soon
as possible when your phone displays
you hear the low battery alert.
➑
Active Line Indicator Shows the current
active line.
➒
Ring Style Indicator Shows the current selected ring
style. The default setting is a ringer.
w
= loud ring
y
= vibrate
t
= silent
➓
Menu Indicator Indicates that you can press M to enter
the main menu or open a feature sub-menu.
x
u
Low Battery
= soft ring
= ring and vibrate
and
About Your Phone
Changing the Zoom Setting
You can set your phone’s display to show nine lines or
seven lines of te xt plus soft ke y labels. Nine lines of te xt
display more information, while seven lines increase
text size.
PRELIMINARY
27
Loading...
+ 217 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.