8/03
Parts List
STX Series
Replacement parts may no longer be available
8/03
Parts List
STX Series
REF
.
NO. PART NO. DESCRIPTION
REF
.
NO. PART NO. DESCRIPTION
1 ---- Plate, Escutcheon
2 3205933J02 Seal, Switch (some models
require only one)
3 0305941K04 Screw, Control Top, #4-40
HEXBTN
4 ---- Lockwasher, #4
5 3205082E11 “O” Ring
6 0105957K69 Lower Housing Kit (includes
items 97 and 98)
7 6405473N01 Baseplate
8 5505727N01 Latch, Battery
9 4105944K01 Spring, Latch
10 3905421C13 Contact, Battery
11 0305941K02 Screw, Baseplate, #4-40
12 3205082E24 “O” Ring
13 4605945K03 Bushing, B+
14 0400002625 Lockwasher, #2
16 0705830C02 Support, Contact
17 0300138651 Screw, #2-56 x 1⁄8˝ PHLPAN
18 3205082E11 “O” Ring
19 ---- Contact, B+
20 ---- Upper Housing Kit w/o Rotary
Switch (includes items 34
and 94-96)
---- Upper Housing Kit w/ Rotary
Switch (includes items 34
and 94-96)
21 0105952M69 RF Switch; Kit
(includes items 22 and 106)
22 0405483P01 Washer, RF Jack
23 0205578M01 Nut, Stud
24 4305577M01 Stud
25 3205472P07 “O” Ring, Stud
26 3205639F03 Gasket
27 0300140383 Screw, #2-56 x 9⁄16˝ PHLPAN
28 0205588M01 Nut, Antenna Seal
29 0905771F02 Pin, Coaxial
31 3905698N01 Switch, Control
32 6405187P01 Plate, Control Switch
33 0300136782 Screw, #2-56 x 3⁄16˝ PHLPAN
34 ---- Bushing, Antenna (not field
replaceable; Order item 20)
35 1505673C03 Connector, Side (J601)
36 NAF4000B Antenna, 800MHz Dipole
37 ---- Control-Flex Kit w/o Rotary
Switch (includes items 38-42)
38 0905675C01 Socket
39 0905463Q01 Connector, 20-Pin (J1)
42 1805799P01 Potentiometer, (R601, Volume,
On/Off)
43 RPX4689A Switch, Subfleet (Optional)
44 0200140458 Nut, Switch
45 ---- Frame Kit (includes items
46-49) – not available
84 ---- Insulator, LCD (not field
replaceable;
order item 80 or 81)
85 ---- Elastomer, LCD (not field
replaceable;
order item 80 or 81)
86 ---- Bezel, LCD (not field
replaceable;
order item 80 or 81)
87 ---- Display Board Kit w/ LCD/LED
(not field replaceable;
order item 80)
Keyboard Kit w/o LCD/LED
(not field replaceable;
order item 80)
88 ---- Light Pipe, LCD (not field
replaceable; order item 80)
89 ---- Shield, Static (not field
replaceable; order item 80)
90 ---- Keypad, 3-Key (not field
replaceable; order item 80)
Keypad, 15-Key (not field
replaceable; order item 80)
Keypad, 12-Key (not field
replaceable; order item 80)
91 4505369Q01 Lever, PTT
92 3205853H02 Gasket
93 ---- Pad, RF
94 ---- Retainer, Membrane (not field
replaceable; order item 20)
95 ---- Membrane (not field
replaceable; order item 20)
96 ---- Grille, Upper Housing (not
field replaceable;
order item 20)
97 ---- Actuator, PTT (not field
replaceable; order item 6
98 ---- Retainer, PTT (not field
replaceable; order item 6)
99 1105668K35 Pad, Urethane
100 ---- Insulator, Front – not available
101 ---- Nut, Retainer
102 1405664J01 Insulator, Plunger
103 4405829J01 Plunger, RF Switch
104 4105836J01 Spring, RF Switch
105 1405787C01 Insulator, Spring
106 0905006P02 Socket, Coax, RF (P4)
107 3205082E25 “O” Ring, Port
108 ---- Seal, Port
109 3205473P04 “O” Ring, Side Seal
110 NTN5023A Retainer, Side Seal
Screw, Captive 6-32 x .190
113 ---- Pin, Stop
Cancelled Product STX Series:
Aftermarket support criteria has
been met for spare parts. Items
may no longer be available.
REF
.
NO. PART NO. DESCRIPTION
46 ---- PCB, PTT (not field
replaceable; order item 45)
47 ---- Contact, Snap-Dome
(not field replaceable;
order item 45)
48 ---- Seal, Dome (not field
replaceable; order item 45)
49 ---- Insulator, B+
51 ---- Insulator, Logic – not available
52 ---- Insulator, RF – not available
53 ---- Standoff (not field
replaceable; order item 50)
54 ---- Screw, #2-56 PHLPAN
55 0305731J06 Screw, #2-56 PHLPAN
56 NTN4519A Rear Shield Kit (includes
item 57)
57 ---- Insulator, Rear – not available
58 2605723N01 Shield, Front
NTN5646B Front Shield Kit
(includes items 59-63 and 100)
59 5005227J02 Microphone (see Transceiver
Board Parts List), (MK501)
60 1105477N01 Adhesive, Speaker
61 5005269T03 Speaker, Transducer, 8 ohms,
LS501
62 ---- Boot, Microphone
63 0905212P02 Connector, Speaker/Mic. (J2)
65 4205474P01 Clip, B+
66 0905006P01 Plug, Coax, RF
68 8405758N03 Interconnect, Display
69 3305206P01 Label, Emergency
3305206P03 Label, Volume Set
70 3605295P01 Knob, Volume Switch
71 3605295P02 Knob, Subfleet Switch (used
only on Rotary Switch Models)
72 0305480E02 Screw, Set. #4-40 x 3⁄32˝
(only one used on
Non-Rotary Switch Models)
73 ---- Screw, Front Cover
74 3205082E66 “O” Ring, Control-Top
75 3205082E67 “O” Ring, Front Cover
77 3205606P01 Seal, Side
78 0300136783 Screw, #2-56 x 5⁄16˝ PHLPAN
79 0300139444 Screw, #2-56 x 5⁄32˝ PHLPAN
80 RPX1020A Plain Front Cover Kit
(includes items 82 and 83)
RPX1021A 3-Key Front Cover Kit
(includes items 81-90)
RPX1023A 12-Key Front Cover Kit
(includes items 82, 83, 87,
89 and 90)
82 1305954N01 Escutcheon, Front Cover, 3-Key
1305954N03 Escutcheon, Front Cover, 15-Key
83 ---- Nut, Front Cover
8/03
Portable
Accessories
STX Series
Chargers
Single Unit Chargers
They are capable of charging
batteries while they are on
or off of the radio. When the
battery is fully charged, a
visual indication is given (if it
is a rapid charger) and the
charger automatically reverts to a trickle charge rate. Actual
charging time varies directly with battery capacity
NLN8858A Rapid Charge,117 Volt
Adapter Kit
NTN4529A Adapter Kit, for 6 Unit Charger (for wall or rack mount
applications)
Battery Maintenance System
plus
(BMS
plus
)
Using interchangeable battery adapters (sold separately), the BMS
plus
is capable of charging and discharging, analyzing, conditioning and
cycle test on batteries; tracking battery voltage and capacity (mAh).
The BMS
plus
offers a 3 year warranty. Its easy-to-use design supports
hundreds of 2-way, cellular, and camcorder batteries with printer
port* (Serial-RS-232C port – uses female 9-pin to male 25-pin cable).
WPLN4079BR Six-Station, 110V AC, 50/60 Hz
WPLN4080BR Six-Station, 230V AC, 50/60 Hz
BMX
plus
Adapter
TDN9451A Standard Adapter, STX
* Compatible with the STAR Micronics SP200 series printers, available from any STAR
Micronics distributor, and other printers with STAR emulation.
Battery Optimizing System II (BOS II)
No other battery analyzer
matches the speed,
accuracy, and versatility of
the Battery Optimizing
System II. Ideal for large
fleet, public safety, and all
other users who rely on their
battery performance. Now
with increased power, more
sophisticated programming
options, and easier to use
navigation paths, optimizing
your batteries was never
easier. Key features include:
• Support for NiCd, NiMH, Li-ion, and SLA batteries
• 100 watt power supply and programmable from 100 mAH to
4 amps per station
• Interchangeable adapters accomodate all major brands
• Includes a variety of user programs and allows for
customizable programming
• Proprietary recondition cycle restores NiCd and NiMH batteries
• Increased processing power and testing resolution – including
a three minute Quicktest that measures the batteries State of
Health (SoH)
• Printer output for reports and labels
• Three year warranty
WPLN4124AR BOS II, Four-Station, 100-240V AC (US line cord)
WPLN4125AR BOS II, Four-Station, 100-240V AC (UK/Euro line cords)
BOS II Adapter
RL-71223 Standard Adapter
NLN8858A
WPLN4079BR
WPLN4124AR
Loading...