OPress to accept call, setting, option,...
EPress to access the Quick Access features.
MPress to access the Options or phone book
menus.
CPress to reject call, setting, option,...
<# Press to select entries and menu options.
IPress to add a phone book entry.
QPress to retrieve a phone book entry.
Making a Call
Enter
Phone No.
Receiving a Call
Open the phone, or press
Ending a Call
Press O, C or close the phone.
Making an Emergency Call
Enter 112O. The call will be directed to a
central emergency operator.
O.
O, *
or
#
.
Redialling the Last Number Called
Press O to display the last number dialled.
1
Press O to call the number.
2
One-Touch Dialling
Press and hold the appropriate digit key 1 to 9 for
numbers in the first nine memory locations.
Congratulations on your purchase of a cellular telephone from Motorola, the world leader in cellular
technology.
All Motorola cellular telephones are manufactured to exacting specifications and world-class quality
standards, and are designed to withstand the harshest environmental conditions. Our commitment to
Total Customer Satisfaction and over sixty five years of experience in personal communications mean you
can depend upon the quality of this Motorola product.
This cellular telephone incorporates Personality™. Unique to Motorola, Personality™ removes the
complexity of cellular communications by guiding you through the features and presenting you with
simple choices every step of the way. Personality™ also allows you to personalise the way you use your
phone - for example, different ringer tones, a phone book and network selection preferences - all
presented with clarity and simplicity. In this manual, each of the Personality™ features is identified with
an O symbol to indicate that it is customisable to meet your requirements.
This cellular telephone has been designed for use with the worldwide GSM (Global System for Mobile
communications) network. By using digital communications methods, your phone provides a number of
advantages over traditional cellular systems:
• Superior speech quality is attained without the usual background noises and interference.
• Your conversation may be encrypted for security. Conversations cannot be eavesdropped using
scanning equipment when the signal is encrypted.
• You are not restricted to use within one country.
Your subscriber number is not contained within the phone as with other systems. Instead, a 'Smart Card'
known as a SIM (Subscriber Identity Module) is supplied by your Cellular Service Provider. All call billing is
made to the subscriber number on the card whether it is used in this or any other GSM unit.
In order to get started straight away with your new GSM
StarTAC, follow these simple steps:
Charge the Battery
! Before you use your phone, please see the ‘Your Battery’
section for important information on battery charging.
1 Remove the battery from its holder and clip it into your phone.
2 Connect the travel charger to the phone and plug it into a
standard mains socket.
Powering On
1 Insert the SIM card into the tray on the side of your phone.
2 Fully extend the antenna.
3 Open your phone and press S to switch on.
4 If prompted, enter your PIN code and press O.
Once a GSM network is located by your phone, it connects and
the network name appears on the display.
Making a Call
1 Enter the number you want to call.
Even if you call a local number, you must also enter the full
A
area (but not country) code.
2 Press O. Your call is placed!
IMPORTANT! Ending a Call
When you have finished your conversation, you must end the
call, even if the other person terminates the call. To end the call,
press O, C or close the phone.
If you do not end the call, you will remain connected and you
A
will be charged for the duration of the connection.
Exploring
Now you can leave your phone on while charging the battery,
making and receiving calls, and exploring features of your phone
at your leisure.
At Motorola, Total Customer Satisfaction is a top priority. If you
have a question, a suggestion or a concern about your Motorola
Cellular Phone, Motorola wants to hear from you.
Please contact the Motorola Cellular Response Centre by fax on:
+44 (0) 131 458 6732, or use one of the local phone numbers in
the following countries:
Austria 0660 7246
Belgium 0800 72 370
Denmark 43 43 15 56
Egypt 02 3411800
Eire 01 402 6887
Finland 0800 117 036
France 0801 63 67 03
Germany 0180 35050
Greece 00800 441 28150
Italy 02 69 633 316
Jordan 06 863750
Kuwait 484 2000 Ext 1177
Lebanon 01 744156
Luxembourg 0800 21 99
Netherlands 0800 022 27 43
Norway 22 55 10 04
Oman 790925
Portugal 01 318 0051
Qatar 418999
Saudi Arabia 01 2303294
South Africa 0800 11 48 49
Spain 902 100 077
Sweden 08 445 1210
Switzerland 0800 553 109
Turkey 0212 2729090
UK 0500 55 55 55
United Arab Emirates 04 32 11 66
For e- mail queries contact : mcrc@ ei. csg. mot. com
For Internet queries contact : http:// www. mot. com
Motorola’s Warranty
Your Cellular Phone is warranted by Motorola to be of
satisfactory quality, fit for its purpose and comply with applicable
Motorola specifications for a period of twelve (12) months from
the date you bought it (verified by reference to your proof of
purchase).
This warranty does not apply if the phone has
1 been mishandled, misused, wilfully damaged, neglected,
improperly tested, repaired, altered or defaced in any way.
2 a defect arising as a result of any failure to follow instructions
either in the manual or product specification.
3 a defect which has arisen from the use of non- Motorola
approved accessories or ancillary items attached to or in
connection with the telephone.
This warranty does not affect your statutory rights as a consumer.
Important information for the efficient and safe operation of your phone................................................................................7
About Your Phone, Battery and SIM Card
Introduces your phone, explains how to charge and maintain batteries and explains about your SIM Card ........................11
Making and Receiving Phone Calls
Explains how to call a number, how to redial and how to accept a call ....................................................................................21
Menu Navigation
Explains how to access and use the phone’s menus....................................................................................................................33
Using The Options Menu
Provides an explanation of the Options Menu and how to use it..............................................................................................37
Using the Quick Access Menu
Provides an explanation of the Quick Access Menu and how to use it......................................................................................71
Accessories
Details the accessories available for use with your phone..........................................................................................................75
What To Do If...
Helps you to solve any problems that may occur.........................................................................................................................77
Index
A comprehensive index .................................................................................................................................................................79
The Manufacturer reserves the right to make changes in technical and product specifications without prior notice.
Many of your phone options are accessed by a simple menu
system. A full description of the menus and how to move around
them is covered in the later section
manual describes the use of each menu item, it will be assumed
that you are familiar with the menu system.
Menu Navigation
. When the
Key Presses
Key presses are represented in this manual using symbols so that
you may locate and use the required sequence quickly. A
sequence of key presses may be shown as follows:
MOC
This means that you should press M followed by O and
then C, in sequence, not simultaneously.
Entering Information
When you are requested to enter information, such as the
number of the phone you wish to call, this is represented in bold
type. For example:
Phone No. - enter the required telephone number.
PIN - enter your Personal Identification Number.
Unlock Code - enter your unlock code.
Location - enter the Phone Book location number.
Prompts and Messages
Your phone responds to key presses by displaying either easy to
understand prompts that guide you to the next action, or simple
messages confirming that your action is complete. Prompts and
messages are represented in this manual in LCD style, for
example:
Enter PIN or Completed.
Other Symbols
You will find the following symbols used throughout this manual:
A A Note contains additional information which is relevant to
the feature/item.
! A Caution contains important additional information which
is relevant to the efficient and/or safe usage of your phone.
O This symbol indicates that the feature is a Personality™
feature that can be customised to meet your requirements.
LThis symbol indicates a short key sequence for the feature.
Your wireless handheld portable telephone is a low power radio transmitter
and receiver. When it is ON, it receives and also sends out radio frequency (RF)
signals.
European and International agencies have set standards and
recommendations for the protection of public exposure to RF electromagnetic
energy.
• International Commission on Non-Ionizing Radiation Protection (ICNIRP)
1996
• Verband Deutscher Elektringenieure (VDE) DIN-0848
• Directives of the European Community, Directorate General V in Matters of
Radio Frequency Electromagnetic Energy
• National Radiological Protection Board of the United Kingdom, GS 11,
1988
• American National Standards Institute (ANSI) IEEE.C95.1-1992
• National Council on Radiation Protection and Measurements (NCRP).
Report 88
• Department of Health and Welfare Canada. Safety Code 6
These standards are based on extensive scientific review. For example, over
120 scientists, engineers and physicians from universities, government health
agencies and industry reviewed the available body of research to develop the
updated ANSI Standard.
The design of your phone complies with these standards when used normally.
Antenna Care
Use only the supplied or approved replacement antenna. Unauthorised
antennas, modifications or attachments could damage the phone and may
violate FCC regulations.
Phone Operation
Normal Position:
the antenna pointed up and over your shoulder.
Tips on Efficient Operation:
• Extend your antenna fully.
• Do not touch the antenna unnecessarily when the phone is in use. Contact
with the antenna affects call quality and may cause the phone to operate
at a higher power level than otherwise needed.
Hold the phone as you would any other telephone with
For your phone to operate most efficiently:
Batteries
All batteries can cause property damage, injury or burns if a
!
conductive material such as jewellery, keys or beaded chains
touches exposed terminals. The material may complete an electrical
circuit and become quite hot. To protect against such unwanted
current drain, exercise care in handling any charged battery,
particularly when placing it inside your pocket, purse or other
container with metal objects. When the battery is detached from
the phone, your batteries are packed with a protective battery
cover; please use this cover for storing your batteries when not in
use.
Driving
Check the laws and regulations on the use of wireless telephones in the areas
where you drive. Always obey them. Also, if using your phone while driving,
please:
• give full attention to driving - driving safely is your first responsibility
• use hands-free operation, if available
• pull off the road and park before making or answering a call if driving
conditions so require.
Most modern electronic equipment is shielded from RF signals. However,
certain electronic equipment may not be shielded against the RF signals from
your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of six (6”) inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should
• Should not carry the phone in a breast pocket.
• Should use the ear opposite the pacemaker to minimise the potential for
If you have any reason to suspect that interference is taking place, turn your
phone
ALWAYS
pacemaker when the phone is turned on.
interference.
immediately.
OFF
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if they are adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this information.
Turn your phone
these areas instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
keep the phone more than six inches from their
in health care facilities when any regulations posted in
OFF
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Turn your phone
in any facility where posted notices so require.
OFF
Aircraft
FCC regulations prohibit using your phone while in the air. Switch
phone before boarding an aircraft.
OFF
your
Blasting Areas
To avoid interfering with blasting operations, turn your phone
“blasting area” or in areas posted: “turn off two-way radio”. Obey all signs
and instructions.
when in a
OFF
Potentially Explosive Atmospheres
Turn your phone
atmosphere and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always,
clearly marked. They include fuelling areas such as petrol stations; below decks
on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air contains
chemicals or particles, such as grain, dust, or metal powders; and any other
area where you would normally be advised to turn off your vehicle engine.
when in any area with a potentially explosive
OFF
For Vehicles Equipped with an Air Bag
An air bag inflates with great force.
installed or portable wireless equipment, in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
STurn the phone on and off.
OAccept call, setting, option.
EAccess the Quick Access
menu.
MAccess the Options menu.
CReject call, setting, option.
<#Scroll backwards and
forwards.
QPhone Book lookup; retrieve
a number from the Phone
Book.
IPhone Book entry; add a
number to the Phone Book.
The Smart Button
The Smart button (?) is on the left hand side
of your phone in-between the two volume
keys. Press it to quickly access all your Phone
Book entries, and then either scroll through the
entries using the volume buttons or press one
of the alphanumeric keys to search for a
specific name - for example, press 7 to
search for the name Pam, or press 7 four
times to search for the name Sam.
AIf a Phone Book entry does not have a name,
it will not be displayed.
If you are using the optional headset, you can also use the Smart
button to make, answer and end calls as follows:
• To answer a call, press ?for 1.5 seconds.
• To end a call, press ?for 1.5 seconds and then quickly press =
again after the beep.
• To make a call, enter or recall a number and then press and
hold ? for 1.5 seconds.
Volume Buttons
The Volume buttons (up - top, down - bottom) are on the left
hand side of your phone, above and below the Smart button.
The buttons are used for adjusting the keypad, earpiece and
ringer volume. A volume meter will display the current volume
setting. The meter will disappear after a short time, or if you
press O or C.
• To adjust the keypad and earpiece volume, press the buttons
with no other features selected.
L To adjust the ringer volume, first press E and then use
either volume buttons to set the required volume.
The Display
The display on your phone shows alphanumeric characters and
informative symbols. The various elements of the display are as
follows:
ABC123
q
rx
k
l
o
p
Characters are used to display messages and
telephone numbers.
Battery Charge Indicator
segments displayed, the greater the battery
charge.
Signal Strength
displayed in the bar graph, the better the signal
strength.
In Use
. Displayed when a call is in progress.
.
Roam
Displayed when you are registered on a
system other than your home system.
Short Message Service
phone has received a message. The symbol will
flash when your message storage area is full.
Voicemail.
received a message.
the Messages section for more information.
. The more segments
Displayed when your Voicemail has
. The more
. Displayed when the
1
See ‘Delete Messages’ in
B
...K
s
z
00:00
1. Network and subscription dependent feature.
Icons are displayed when you are in the Quick
Access menu.
A scroll bar will appear on the right of the
display when you are in a list/menu. The button
on the scroll bar indicates where you are in the
list.
Indicates that a menu item is currently selected.
Real Time Clock
display the time in either a 12-hour or 24-hour
format.
.
The real time clock can
In addition, when you are expected to press O, a prompt will
appear in the display, for example Select?.
Low Temperature Use
The liquid crystal display in your phone behaves differently at
extremely low temperatures. The display may respond slowly to
key presses; this is normal and does not affect the phone
operation in any way.
When your phone is closed, the power/status indicator on the
top of the phone provides you with the following information:
Incoming Call
In Service
No Service
Roaming
Alternate Red/Green
Flashing Green
Flashing Red
Flashing Orange
Looking After Your Phone
! Never leave your phone or battery in extreme temperatures
(over 60°C), for example behind glass in very hot, direct
sunlight.
To clean your phone, use a moistened or antistatic cloth. Do not
use a dry or electrostatically charged cloth.
Your Battery
Charging a New Battery
New batteries are supplied in a totally uncharged state.
To ensure maximum battery performance, a new battery (or
battery that has not been used for several months) should be
charged for at least 14 hours before use.
A new battery will require several full charge/discharge cycles
A
in order to achieve its optimum performance.
A new battery, or a battery that has not been used for several
A
months, may cause a premature fully charged indication.
Ignore this indication and let the battery charge for several
more hours, remove and re-insert the battery into the charger,
and charge for an additional 14 hours.
Battery Design
Your phone is capable of carrying two batteries: the Main and
the Auxiliary battery. These batteries complement each other
because as the phone drains one battery, it automatically
switches to the other, without losing an active call.
! Always treat your batteries with care. See ‘Battery Safety’, at
the beginning of this manual.
! Never leave your battery in extremely high temperatures (over
60°C), for example behind glass in very hot, direct sunlight.
! Only Motorola Original Accessory batteries can be charged in
the phone or the optional Desktop charger.
! Do not use lithium ion batteries at extremely low temperatures
as the maximum standby/talk time will not be available when
cold.
To ensure that you enjoy maximum battery life and use your
battery to its fullest capacity:
• For the best results, Li-Ion batteries should be charged using
the Desktop Charger.
• The battery should be at or near room temperature when
charging.
Handling Batteries
New batteries are supplied fitted with protective covers. These
covers must be removed before the battery can be used. Save the
covers to carry and store batteries which are not in use. Covers
prevent electrically conductive objects from making contact with
the battery terminals, thereby reducing the risk of injury or
damage from a battery short circuit.
Removing the Main Battery Cover
1 Press and hold the release catch.
2 Press the battery upwards, out of its cover.
Fitting the Main Battery Cover
1 Lower the side of the battery opposite the release catch into
the cover.
2 Lower the side of the battery with the release catch into the
cover, until the catch clicks into place.
Removing the Auxiliary Battery Cover
1 Hold the battery securely with one hand.
2 With the thumb of your other hand, press the base of the
cover upwards. Continue this action until the cover slides free
of the pins on the bottom of the battery.
3 Swing the cover away, clear of the battery.
Fitting the Auxiliary Battery Cover
1 Slide the narrow end of the cover into the small grooved hook
on the top of the battery.
2 Push the cover firmly upwards until the base of the cover
• Best battery performance will be achieved when you regularly
charge and discharge batteries as instructed in this manual.
• Battery performance is greatly affected by network coverage.
• Set Battery Saving Mode to On (see ‘Phone Setup Menu’)
and/or Frequency of Search to Slow or Medium (see
‘Network Selection Menu’).
• Keep the antenna fully extended whenever possible to ensure
maximum signal strength.
• If left unused, a fully charged battery will discharge itself in
approximately one month.
• When not in use, store your battery uncharged in a cool, dark
and dry place.
Low Battery Warning
When the battery level is low and only a few minutes of talk time
remain, a warning signal (two double beeps) will sound, the
border of the battery symbol will begin to flash, and Low Battery will be displayed.
When the battery is completely discharged, your phone will turn
off.
If you have an auxiliary battery fitted, it is used before the main
battery. A tone sounds when changing to the main battery.
Charging Your Battery Using the Travel
Charger
The travel charger can power the phone and charge a fitted
battery.
! Ensure that the local mains voltage at your location matches
that of your travel charger.
Fit a battery onto your phone. See ‘Fitting a Battery to Your
Phone’, later in this section.
To charge your battery:
1 Attach the correct adapter plug to the travel charger.
2 Connect the travel charger to the phone.
3 Insert the travel charger plug into a suitable mains power
socket.
A beep-tone is heard and the battery icon flashes when charging
begins.
Your phone can be either on or off during charging.
A
The state of charging is monitored and displayed by your phone.
See ‘Battery Indicators’ later in this section for details.
Batteries charge in about 2 to 3 hours, depending on the battery.
AIt is normal for batteries to become warm during charging.
Desktop Charger Power Supply
1 Connect the travel charger to the desktop charger socket.
2 Plug the travel charger into a standard mains socket.
Inserting Your Phone into the Charger
Insert your phone into the desktop charger as shown.
Inserting a Spare Battery into the Charger
A spare main battery or an auxiliary battery can be charged on its
own or at the same time as your phone. Insert the battery into
the desktop charger as shown.
For maximum NiMH battery charging, you should double the
A
charge time.
ACharge times will increase if you make or receive phone calls
while charging.
Fitting a Battery to Your Phone
Fitting a Main Battery
Position the battery as illustrated in the following diagram, and
snap-lock it into place.
The battery meter displays different messages depending on the
batteries attached, and whether or not there is an external power
source. The battery meter is found in the Call Related Features
part of the Options Menu.
Not
Available
Battery
Aux Battery
Main Battery
Charging
Battery
Charging
Aux Battery
Charging
Main Battery
Fast Charge
Complete
Invalid
Battery
No battery fitted; the phone is operating from
external power.
Only one battery fitted; the phone is operating
from this battery.
Auxiliary and main batteries fitted; the phone
is operating from the auxiliary battery.
Auxiliary and main batteries fitted; the phone
is operating from the main battery.
Only one battery fitted; this battery is being
charged.
Auxiliary and main batteries fitted; the
auxiliary battery is being charged.
Auxiliary and main batteries fitted; the main
battery is being charged.
All conditions; fast charging is complete.
Battery may be defective, or may not be a
Motorola original battery.
Your SIM (Subscriber Identity Module) card is supplied by your
Cellular Service Provider when you buy your phone. You will not
be able to make or receive calls without a SIM card inserted in
your phone.
ASome networks allow you to make emergency calls without a
SIM card inserted.
The SIM card is a ‘Smart Card’ that contains your phone number,
service details and memory for storing Phone Book numbers and
messages. You can therefore use your SIM card in someone else’s
GSM phone and you will be charged for the call.
Like a bank or credit card, you should keep your SIM card secure.
Do not bend or scratch your card and avoid exposure to static
electricity or water.
!
Switch off your phone before inserting or removing the SIM
card. Failure to do so may damage the memory on your SIM
card.
SIM card Insertion
Switch off your phone by pressing S and insert the SIM card
into the SIM card tray as shown. Push the tray into the slot on the
side of the phone. If the SIM card is inserted the wrong way
round, or damaged, the Check Card message will be displayed.
Remove the SIM card, then properly re-insert it into the phone.
If either of the Bad Card See Supplier orBlocked See Supplier messages are displayed, contact your
Cellular Service Provider.
To switch the phone on or off, press and hold S. If VibraCall is
selected, the phone will vibrate when it is switched on.
If the phone displays Check Card, there is no SIM Card
inserted. Once inserted, the phone will check that the SIM Card is
valid.
A number of messages may appear:
• Enter PIN - a request to enter the SIM Card PIN code (if
required).
• Enter Phone Unlock Code - a request to enter the phone
unlock code (if required).
• Searching... followed by a network name - as the phone
finds a suitable network to connect to.
Entering Your SIM Card PIN Code
To enter the PIN code, enter PIN CodeO.
As you type in each digit of the PIN code a * character will be
displayed.
If you make a mistake, press C to remove the last digit.
Holding C down will remove the entire entry.
When the PIN code is complete press O.
If the PIN code is incorrect, the message Wrong PIN will be
displayed, followed by Enter PIN.
! If an incorrect PIN number is entered three times
consecutively, your phone will automatically lock-up and the
Blocked message will be displayed. See ‘Unblocking Your
Phone’ for details.
To change the PIN code, see ‘Change SIM PIN Code’ in the
the Options Menu
O
Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock
Code you must enter your unlocking code by entering Unlock
Code O.
The unlock code is a four digit number, initially set to 1234. To
change the code, see ‘Change Unlock Code’ in the
Options Menu
If you forget your unlock code, press M. This will display the
‘Change Unlock Code’ option. Enter O Security Code,
enter a new unlock code, and press O.
To make a phone call, your phone must be switched on,
unlocked and have the antenna fully extended.
It will not be possible to make a phone call unless you are in an
area where there is GSM service. When a service has been found,
a series of rising bars, x, will show the signal strength.
There are a number of ways to make a phone call:
• Using the digit keys.
• Using automatic redial.
• Dialling numbers from the Phone Book*:
using one-touch (turbo) dialling,
using an entry from a location,
using an entry of a name with the Smart button,
using one of the last ten numbers called.
•Calling an embedded number in a message.
*Your phone contains a 'phone book' that can be used to
A
store names and telephone numbers. See O
Phone Book?
for further details.
What is the
Keypad Digits
The simplest method of making a phone call is to enter the
number using the digit keys, then press O.
AIf you make a mistake, press and release C to remove the
last digit. Holding C down will remove the entire number.
The display will show Calling when the call is being made. If
there is no answer, press O, or close the phone to end the
call.
When the call is answered, the display will change to
Connected for a few seconds, followed by End Call?.
To end your call press O, or close the phone.
Automatic Redial
If your call attempt does not succeed, the message Redial? will
be displayed for five seconds. Pressing O at this point will
automatically redial the phone number.
When the call is answered, you will hear a short ring tone.
The maximum number of redial attempts is set by your Cellular
Service Provider. If the phone call cannot be connected within
this maximum, the message Redial Failed will be shown.
To quickly retrieve and dial a number stored in the first nine
locations of your Phone Book
digit key. For example, pressing and holding 2 will dial the
number stored in location 2 of your Phone Book.
You do not need to press O to call the number.
A
By Location
1 Press Q and a location number. For example Q23
will retrieve the number stored in location 23 of the Phone Book.
If you don’t know the exact location, enter a random location
and then use < and > to scroll to the number. Location
numbers are from 1 to 255.
2 Press O to call the number.
By Name Using the Smart button
You can also dial a number in the Phone Book associated with a
name entry. The Smart button provides a quick and easy method
to retrieve phone numbers from the Phone Book.
1 Press the Smart button.
2 Scroll through the alphabetically-listed names using either the
volume up/down buttons, or < and >. You may also use
any of the numeric keys (2...9) to skip to entries
beginning with a desired letter.
1
, press and hold the appropriate
To skip to a section of the phone book beginning with say, the
letter N, press 6 twice. The first entry beginning with N will
be displayed. You can then scroll through this section using
either the volume up/down buttons or < and >.
3 Press O to call the number of the selected name.
4 To return to the first entry, press the Smart button again.
AIf you inadvertantly press the Smart button, press and hold
C to exit the Phone Book.
If the Phone book does not contain any entries with an exact
A
match on the letter requested, the next available entry is
displayed.
Last Ten Calls
L When in standby mode, press O and scroll through the
numbers. Press O to make the call.
Alternatively, you can retrieve the last number dialled using the
‘Last Ten Calls’ feature in the Phone Book menu.
Calling an Embedded Number in a Message
Details on how to call a number embedded in a message are
given in the Messages Menu section.
1. The Phone Book entries that you are able to access will depend on the
One-Touch Dial Setting option in the Phone Book menu.
To make an international phone call press and hold the 0 key.
After a couple of seconds the international dialling prefix + will
appear in the display, this allows you to call from any country
without knowing the local international access code.
Now enter the country code, followed by the phone number. The
country code follows the conventional format, 49 for Germany,
44 for the UK, 46 for Sweden, etc.
Just like a conventional international call, remove the leading '0'
of the area code when you dial.
Inserting Pauses Into Phone Numbers
To obtain a three second 'pause' character in a phone number,
press and hold * for a couple of seconds, the pause symbol Ü
will appear.
This symbol produces a three second delay whenever it is used.
However, the first pause character in a phone number is a special
case: it allows the call to be answered before dialling the
remaining digits.
Pause - A Working Example.
If, for example, if you have a tone-based voicemail system on
555-6911, with a mailbox number 1066 and password 2001.
Then you may dial the following number:
5556911Ü1066Ü2001O.
The first part of the number is used to call the voicemail system.
When the call is answered the first pause will produce a delay of
three seconds before the tones for 1066 are sent to select the
mailbox.
There will be a second pause of three seconds before the tones
for 2001 are sent as the password.
GSM Emergency Calls
The worldwide GSM network provides a standard number, 112,
to dial in cases of emergency.
Provided that your phone has found a network, you will be able
to make an emergency call. The call can be made regardless of
any security codes and, depending on the network, with or
without a SIM Card inserted.
The emergency call will be directed to a central emergency
operator.
To dial the GSM emergency number, press
112O
While the emergency call is being made and connected, the
display will show Emergency Calling.
• You must be in an area where there is GSM service.
• Your Call Diversion and Call Barring settings should not be set
to divert or bar incoming calls.
When your phone receives a call, it will ring or vibrate. To answer
the call, extend the antenna and then open the phone. If your
network supports Caller Line Identification (CLI), the caller’s
number or name will be displayed, depending on your Phone
Book entries.
Your phone automatically searches in the Phone Book for the
caller’s number. If the number is found, then the name entry
associated with the number is displayed. If the number is not
found, or if it is but there is no associated name in the Phone
Book, then the caller’s number is displayed.
Normally, the call is answered as soon as the phone is opened.
However, if the Key Answer Only option is selected, opening the
phone will not answer the call - you will have to press a key.
When the identification is displayed, you can decide whether or
not to answer the call by pressing O, a numeric key (1 to
9), * or >. To set this option, see ‘Key Answer Only’.
You can also answer using the keys if the phone rings whilst the
phone is already open.
If your phone is open and you do not want to answer the call,
you can:
• Press and release C.
The caller is either diverted to a forwarding number or hears a
busy tone, depending on your features settings.
or
• Press and hold C. This will reject the incoming call. No call
divert option will be offered in this case.
If your phone rings and you do not answer it, the message
Unanswered Call will be displayed the next time you open the
phone, so that you know someone tried to call you.
Ending a Phone Call
To end a phone call, press O, C or close the phone.
You may find that you are prompted to enter certain security or
access codes before you can use your phone or some of its
features. These codes are:
• PIN Code (SIM Card PIN code).
Prevents access to your SIM Card. The number is supplied by
your service provider. Your SIM Card will be blocked if three
unsuccessful attempts to enter this number are made.
• PIN2 Code.
Prevents access to certain advanced features. The number is
supplied by your service provider.
• Unlock Code.
Protects your phone from unauthorized use. The default code
is 1234.
• Unblock Code.
Unblocks your SIM Card if it has been blocked by three
unsuccessful attempts to enter the PIN code. The number is
supplied by your service provider.
• Security Code.
Prevents access to security features. The default code is
The “In-Call” menu provides access to additional functionality
during a call.
Entering the In-Call Menu
The “In-Call” menu is accessed by pressing the M key during
a call.
Leaving the In-Call Menu
To leave the “In-Call” menu press the C key.
In-Call Menu Options
The options listed in the “In-Call” menu will dynamically change
depending on the current call state. The following list contains all
of the possible options in the “In-Call” menu.
Only some of the options will appear at any given time. The
A
order of the options may vary.
Handsfree On/Off
This option is used to switch between Handsfree and normal
operation if the phone is installed in a car kit that does not have
an automatic presence detector.
Hold Call
This option will put the active call on hold.
Make a New Call
This option allows you to make another call.
Restrict My Number
This option allows you to make a call without the remote user
getting advanced warning of the number.
End Active Call
This option terminates the active call, and makes the call that was
previously on hold, the active call.
This option allows you to switch between the active call and the
call that is on hold.
Conference Call
This option connects you with up to five other telephones on one
call (see Making a Conference Call).
Transfer Call
This option transfers a call to another telephone (see ‘Transfer
Call’).
Split Call
This option allows you to separate an individual from the main
Conference Call.
Reject Waiting Call
This option will reject a waiting call.
Reconnect
This option will make the call on hold the active call.
Reconnect Held Call
This option is similar to Reconnect but will appear if you have a
call on hold, and a call waiting. Reconnect Held Call will
make the call on hold the active call.
Turn Mute On or Off
The option temporarily turns off the microphone during a call.
Reselect this opktion to resume your conversation.
Your phone supports the GSM options of Call Holding and Call
Waiting. Using these options you can place a current phone call
on hold and accept an incoming call or start a second call (See
‘Call Waiting’ in the ‘Call Related Features’ menu for details
of how to control this feature).
Call Holding and Call Waiting Scenarios
The display will automatically change according to the status of
your current call (or calls) and will propose the option that you
are most likely to want. Press O to accept this option or press
M to scroll through the “In-Call” menu for the alternative
options. By following this procedure you will find that even the
triple combination of an active call, a held call, and a call waiting
is easy to manage.
The following points summarise the more common situations:
• To put an active call on hold, press M, the display will
show Hold Call Select? - press O to put the call on
hold. To reconnect the call, press O.
• To put an active call on hold and make another call, first put
the active call on hold, then press M and select the Make New Call option
• To switch between an active call and a held call press O at
the Two Calls Switch? prompt.
1. A quicker method of making another call is to enter the
number to be called directly and press
place the current call on hold and attempt to call the number
entered.
1
.
O. Your phone will
• To accept a waiting call, press O. The active call will be
placed on hold. If you prefer to end the active call before
accepting the waiting call, press M and select the End Active Call option, or End Held Call option as
appropriate.
• To reject a waiting call, press M and select the Reject Call Waiting option (or simply press the C key).
If you have an active call, a call on hold and a call waiting, you
A
cannot accept the waiting call until you end either the active
call or the held call, or join the active and held calls.
This option joins the active call with a held call. With Conference
Call, you can have a conference with up to five other telephones.
At any time during your call, you can add, disconnect or separate
individuals from the Conference Call using other “In-Call” menu
options.
AYou must subscribe to both Conference Call and Call
Waiting Supplementary Services to be able to use this
feature.
Initiating a Conference Call
To initiate a Conference Call, place the active call on hold, and
dial another phone number. You will then have one active call
and one call on hold.
Press the M key to enter the “In-Call” menu and select
Conference Call. The currently active call and the call on
hold will then join into one Conference Call.
Managing a Conference Call
While in a Conference Call, you will have the option to add new
calls to the Conference Call or separate one of the members from
the Conference Call.
Adding a New Call
There are a number of different ways to add new calls to the
Conference Call:
• Using the digit keys.
• Using the Make New Call option from the “In-Call” menu.
• Recalling a Phone Book Entry using Quick Access
• Answer Call Waiting.
No matter which method is chosen to add a new call, the original
Conference Call will be first placed on hold while the new call is
being connected. You must then enter the “In-Call” menu and
select Conference Call to join the New Call with the original
Conference Call in progress.
Separate One of the Members in the Conference
During a Conference Call, you will also have the option to
separate a selected member from the main Conference Call.
AIn order to separate a member from the main Conference Call,
there must not be any calls on hold.
Press M during a Conference Call and select Split Call.
You will then be presented with the phone number or name of
all members of the Conference Call. Use the scroll keys to find
the selected member of the Conference Call. Once the desired
member is selected, press the O key and select Split
Call.
At this point, the selected call will be separated from the main
Conference Call and private conversation between you and the
selected member is possible.
To re-join all the parties again, select Conference Call from
the “In-Call” menu.
Transfer Call transfers a call to another telephone. There are two
ways to transfer a call; before or after the third party is
connected.
AYou must subscribe to both Conference Call and Call Waiting
Supplementary Services to be able to use this feature.
Initiating Transfer Call Before the Third
Party is Connected
To transfer a call to another telephone, press the M key and
select Transfer Call from the “In-Call” menu. Enter the
number where the call will be transferred and press O.
Your phone will then attempt to transfer the call. The display will
show Transferring Call followed by Call Transferred. When the call has been successfully transferred,
you will be disconnected automatically.
Initiating Transfer Call After the Third Party
is Connected
If you already have an active call and a call on hold, press the
M key and select Transfer Call from the “In-Call”
menu. Your phone will then attempt to transfer the active call to
the call on hold. The display will show Transferring Call
followed by Call Transferred. Once the call has been
successfully transferred, you will be disconnected automatically.
A large number of your phone's options are accessed by using
menus which use a common approach for selection, change and
cancellation.
Please read this section carefully before attempting to access a
menu option. When you understand the common approach to
menu navigation and how the menus are shown, you will be able
to access and change options with ease.
The menus described here can only be accessed when the phone
is in the standby mode. Menu operation is not possible when you
are making or answering a phone call.
Entering the Menus
Two different keys are used to access the menus:
Maccesses the Options menu.
Eaccesses the Quick Access menu.
Once entered, the menus use the M, <, >, O and
C keys in a common manner to access and change individual
options.
Leaving the Menus
To leave any of the menus, you can either press and hold C or
repeatedly press C. Both of these actions will return your
phone to the stand-by mode.
Alternatively, a quicker way to leave the menus is to press
A
EC.
Menus and Sub-menus
A menu is a simple list of options. Some of these options provide
access to a further list of options called a sub-menu. When
navigating through the menus you may find it helpful to think in
terms of menu levels - the ‘parent’ menu being on one level and
its sub-menus being on a lower level.
Moving to and Selecting a Menu Option
To move from one option to another on the same level, use the
scroll keys: M and > scroll forwards and < scrolls
backwards. When you find the option you want, press O to
select it.
Depending on the option you select, one of three things will
happen:
• either a brief message will be displayed confirming an action,
for example Completed.
• or a prompt will be displayed requesting you to enter
information, for example Enter PIN or Enter Name.
• or the first option of a sub-menu will be displayed. You can
select this option using O or browse through the other
options using the scroll keys.
To leave an option or sub-menu, press C. This will take you
back to the parent menu item.
Menu Options with Security Codes
Some options are protected from misuse by requiring you to
enter one of the security codes. In order to use these options, you
must enter the requested code before proceeding.
The following steps will take you through how to switch the
Extended Menus option on:
1 When the phone is in the stand-by mode, press M. This
will access the Options menu and Phone Book will be
displayed.
2 Press # three times to go to the Phone Setup menu item.
3 Press O to select the sub-menu. The display will now show
the Adjust Ring Volume menu option.
4 Press # repeatedly until the Extended Menus sub-menu
item is displayed.
5 Press O to select this item. You can now select between
On or Off, the current setting will be shown with a z
character. If the z character is next to Off, press # and
then O to switch Extended Menus on. If the z character
is next to On, press C to leave the setting as it is.
With Personality™ you can personalise the menus by choosing
which features you want readily available. Less frequently used
features can be stored out of sight.The menu diagrams in this
manual show the default conditions of the menu settings when
you first receive your phone.
• Short menus contain those items which are used most often.
The default items are shown in bold type in this manual.
• Extended menus contain those items which are used less
often. The default items are shown in italics in this manual.
You can change which items are active in the short and extended
menus. In this way, you can decide which items are displayed as
you scroll through a menu.
To move an item from the short menu to the extended menu (or
from the extended menu to the short menu), select the item and
hold down O until a prompt appears offering the following
choices:
• Remove From Short (Extended) Menus
• Leave in Short (Extended) Menus
Select the option you want by pressing O.
AThe settings for some menu features cannot be changed.
You can store names and telephone numbers as entries in an
electronic ‘Phone Book’. These entries are stored in the Personal Numbers list in your phone or SIM card memory, and in the Fixed
1
Dial list
on your SIM card. Once stored, a number can be quickly
retrieved and dialled.
Your Phone Book storage capacity is as follows:
Phone Memory SIM Card Memory
Personal numbers100 entries155 entries
Fixed dial numbersNone40 entries
Phone number digits3220
Name characters16 10-50
Locations1-100101-255
SIM card capacity varies depending on the cellular service
A
provider.
1. Availability of the Fixed Dialling feature depends on the type of SIM
Card you have.
Postscripting
This allows you to make use of area codes and other prefixes
previously stored in your Phone Book when making a call.
To use postscripting, select the Phone Book entry containing the
prefix and then simply enter the rest of the number and press
O to make the call.
You can also use postscripting if you want to call a number
similar to one you have stored in your Phone Book. Retrieve the
number from the Phone Book, delete the relevant digits and then
enter the new number.
Postscripting a number does not overwrite the entry in the
alphabetic characters, for example when storing names in the
Phone Book or when creating messages.
For example, if you press 5, the first displayed character will
be J. If this is not the required character, then you can press the
same key again to show K. Another press will display L,
another... ...will display 5. Your phone will continue to scroll
through the characters available on the selected key with each
new key press.
A long press of any of the keys will switch all the characters to
lower case, a second long press will switch back to upper case.
To enter the next character press the appropriate key. If,
however, the next character is on the same key as the previous
character you will first need to press #. Pressing # a second
time will produce a space.
If you make a mistake, you can go back to the incorrect character
by pressing *.
Characters can be removed from the display by pressing C.
The character before the cursor ( Ú) is the character which will be
deleted.
Press O to store the information.
Available Characters
Press the appropriate keys to get the following characters:
The Personal Numbers sub-menu is used for creating and
managing your list of personal numbers.
Find Entry By Name
This option is used to select a phone number from a list of
alphabetically sorted Phone Book names.
Once selected, this option will display the message Enter Name.
You can enter the first three characters of a name. You do not
need to enter all three characters, but a longer entry will result in
a more accurate search.
The Phone Book entries will be searched and the first matching
entry will be displayed.
If there isn’t a name matching your entry, the nearest matching
entry will be displayed.
If you do not enter any name information, the first alphabetical
entry will be displayed.
If there are no names stored, No Names Stored will be
displayed.
To display adjacent Phone Book entries use * and #. When
the desired name is displayed press O to select it. The phone
will now enter the 'Call Number', 'Modify Name Or Number' or
'Erase Name And Number' options sub-menu.
Alternatively...
You can also display the names held in the Phone Book, and call
the corresponding number, using the Smart button. See ‘Phone
Book Dialling’.
Find Entry By Location
L Press Q Location.
This option is used to select a phone number from a list of
numerically sorted Phone Book locations.
Once selected, enter a location number. If the entered location is
not valid, a timed message Range 1-XXX will be displayed and
the phone will return to the Enter Location menu item.
The Phone Book entries will be searched and an entry will be
displayed.
If you enter a location number for which there is no entry,
Location Empty will be displayed and the nearest non-empty
location will be selected instead.
If you did not enter a location, the first numerical entry will be
displayed.
If there are no numbers stored, No Numbers Stored will be
displayed.
To display adjacent Phone Book entries use * and #. When
the desired name is displayed press O to select it. The phone
will now enter the 'Call Number', 'Modify Name Or Number' or
'Erase Name And Number' options sub-menu.
Alternatively...
You can also select a number from a Phone Book location using
Q. See ‘Making and Receiving Phone Calls’. You can do this
even if you are not in the Phone Book menu.
Call Number, Modify Name Or Number or Erase Name
And Number Options
Once a Phone Book entry has been selected, it can be called,
modified or deleted.
Call Number
This option is used to call the selected Phone Book telephone
number.
Modify Name Or Number
This option is used to change the selected Phone Book entry.
The entry’s current telephone number and name will be
presented, in turn, for modification. You can accept the current
settings or modify as required.
Erase Name And Number
This option is used to erase the selected Phone Book entry.
Simply press O when the phone displays the message Erase
Name And Number. The option will display the timed message
Erased XXX and then return to the Find Entry menu item.
Add Entry
L I
This option is used to add (store) entries to the Phone Book. You
can choose to add the new entry to either the phone or SIM Card
memory locations.
Add To Phone Memory, Add To SIM Card Memory
Once you have selected the destination of the new entry, enter
the phone number, name and location number of the new entry.
The last telephone number displayed will be presented by
default; it can be used or discarded as required.
If the entered location is not valid, a timed message Range
YYY-ZZZ will be displayed and the phone will return to the
Enter Location prompt. If the chosen location is currently
used by another entry, you will be asked for confirmation that
the location can be overwritten.
If you do not supply a location number, the next available
location will be used.
When the new entry has been entered, a timed message
Stored XXX will be displayed.
Alternatively...
You can add entries to the Phone Book using I. You can do
this even if you are not in the Phone Book menu. Press O to
add the new entry to the phone memory, or press #O to
add it to the SIM Card memory. Then, enter the phone number
and name of the new entry, and confirm or set the location
number. The message Stored appears when the entry is
complete.
Check Capacity
This option is used to check the number of free Phone Book
entries in the phone or SIM Card memory areas.
Check Phone Capacity, Check SIM Capacity
Once selected, a timed message XX Unused Locations
displays the requested information.
This option enables you to prevent access to the Personal
Numbers list.
To SIM Card Memory, To Phone Memory, To Phone &
SIM Memory, No Memory Restrictions
You can prevent access to all entries in the SIM Card memory,
the phone memory or both the phone and SIM Card memory. To
cancel all access restrictions use the No Memory Restrictions
option.
When you change the restrictions, you will be requested to enter
the Security Code before the change is made.
Last Ten Calls
These options can be used to call the most recently used phone
numbers.
Once an option has been selected, use < and > to scroll
through the list of phone numbers. Press O to call the
displayed number.
AYou can use postscripting to modify a number once you have
retrieved it from either of the Last Ten Calls lists.
Last Calls Made
This option can be used to redial the phone number of any one
of the last ten calls made.
Last Calls Received
This option can be used to redial the phone number of any one
of the last ten calls received.
AYou will only see numbers in the Last Calls Received list if you
have Caller Line Identification.
Erase All Numbers
This option erases all the numbers stored in your Last Ten Calls
Made and Last Ten Calls Received lists.
This option allows you to access your cellular phone, fax and data
numbers so that you can retrieve or modify them when required.
For example, if you have difficulty remembering your cellular
phone number, store it with the name My Phone and then you
will be able to retrieve the number as required.
The My Phone Number(s) list is stored on your SIM Card.
When you select this item, the first location will be displayed. Use
< and > to scroll through the phone numbers stored.
To enter or change a number, scroll to the location and press
O. You will be prompted to enter a phone number and then
a name. Press O to store the information.
Depending on your Cellular Service Provider, you may find that
A
one or more of the entries in the My Phone Number(s) list will
have been defined. You may not be able to change these
predefined entries.
Fixed Dialling
AAvailability of the Fixed Dialling menu depends on the type of
SIM Card.
This feature allows you to limit use (typically third-party use) of
your phone to a predefined list of phone numbers or, if you wish,
to a list of country codes, area codes, or other prefixes of your
choosing.
When Fixed Dialling is switched on, the only numbers that can be
dialled from your phone are those stored (or whose prefix is
stored) in the Fixed Dial list. If you attempt to dial any other
number (apart from an emergency number), the message
Restricted will be displayed. You will not be able to make fax
or data calls.
To make a call when Fixed Dialling is switched on, either dial the
number manually, or select it from the Fixed Dial list and press
O.
Up to 40 entries can be stored in the Fixed Dial list. The list is
stored on your SIM Card.
!
This option may be affected by the Call Barring setting.
View Fixed Dial List
This option allows you to scroll through the numbers in the Fixed
Dial list. When you find the number you want, press O to
make the call.
This option allows you to switch Fixed Dialling on or off and to
enter or change entries in the Fixed Dial list.
You will be prompted to enter your PIN2 security code when you
select this option.
On
Switches fixed dialling on.
Off
Switches fixed dialling off.
Edit Entry
Modifies or clears an entry in the Fixed Dial list. When you select
this option, the first non-empty location in the list will be
displayed. Scroll to the entry you want to change and press
O. You will be prompted to edit the phone number and the
name. To erase the entry, press C.
Add Entry
Adds a phone number and name to the Fixed Dial list. When you
select this option you will be prompted to enter the phone
number, name and a location number. If you do not specify a
location number, it will be stored in the next available location.
When setting up your Fixed Dial list, you may want to reserve
A
the first nine locations for phone numbers you wish to OneTouch Dial. See also ‘One-Touch Dial Setting’.
Erase Entry
Erases a phone number and name from the Fixed Dial list. The
first entry in the fixed dial list will be displayed. Scroll to the entry
you wish to delete and press O.
One-Touch Dial Setting
This option allows you to specify which Phone Book list can be
One-Touch Dialled.
To Phone Memory
Switches One-Touch Dialling to your Personal Numbers list stored
in phone memory (locations 1 to 9).
To SIM Memory
Switches One-Touch Dialling to your Personal Numbers list stored
on your SIM Card (locations 101 to 109).
To Fixed Dial list
AThis option is only available if you have Fixed Dialling.
Switches One-Touch Dialling to your Fixed Dial list
(locations 1 to 9).
'Restrict My Phone Number' is a network feature. You will need
to subscribe to one of the two Caller Line Identification restriction
features with your Cellular Service Provider.
Show ID On Next Call
Your phone number is sent with the next attempted call, after
this your phone number will not be sent until you re-select this
option.
Restrict ID On Next Call
Your phone number will not be sent with the next attempted
call, after this your phone number will be sent with calls until you
re-select this option.
Call Diverting
Call diverting is a network feature. If your phone is unavailable,
or you do not wish to receive calls, incoming calls can be diverted
to other phone numbers.
This option can be used to:
• Divert all incoming Voice calls unconditionally.
• Divert incoming Voice calls whenever your phone is
unavailable, busy, not reachable or not answered.
This option will enable you to divert all Data calls to a single
number.
The option has two settings, On or Off.
If you change the setting to On, you will be asked to enter a
diversion phone number using the digit keys.
Cancel All Diverting
This option will enable you to cancel the diversion of incoming
calls.
! This option resets all diversion settings to Off and
removes all diversion numbers.
Talk and Fax
This is a network feature that allows you to speak and then send
or receive a fax during the course of a single call.
Your phone supports a data and fax transmission speed of up
A
to 9600 bps.
Before making a Talk and Fax call, ensure that:
• Your phone is “fax-ready” (it has been switched off,
connected to the fax, then switched back on). Connecting
your phone to the fax in the middle of the call will not work.
• The Talk and Fax mode is set to On.
A Talk and Fax call automatically switches to fax mode when you
start sending the fax. While the fax is being transmitted, the
message Fax in progress will be displayed. The call
automatically ends when the fax transmission is complete. You
cannot switch back to voice mode in the same call.
While a Talk and Fax call is active, incoming call services like
A
Call Waiting and Call Holding are suspended.
If you receive a Talk and Fax call when:
• Your phone is not fax-ready - you can only talk.
• Your phone is fax-ready but Talk and Fax mode is off - the call
is automatically routed to your fax (you cannot talk).
On
Switches Talk and Fax mode on for the next and all subsequent
calls.
Off
Switches Talk and Fax mode off for the next and all subsequent
calls.
Your phone supports the GSM network options of Call Holding
and Call Waiting. Using these options you can place a current
phone call on hold and accept an incoming call or start a second
call.
The Call Waiting menu item has two settings On or Off. If you
select Off, you will be not be notified of waiting calls. The person
trying to contact you will either receive the busy tone, or be
diverted by the ‘Detailed Diverting - If Busy’ option.
If Call Waiting is On, you will be notified of a waiting call by an
audible alert and by the message Call Waiting - Answer? .
You can press O to accept the waiting call, or use M to
scroll to an alternative option and then press O.
If you have Caller Line Identification, the caller’s number or
A
name is displayed instead of the Call Waiting message.
Call Holding and Call Waiting Scenarios
The display will automatically change according to the status of
your current call (or calls) and will propose the option that you
are most likely to want. Press O to accept this option or press
M to scroll through the alternative options. By following this
procedure you will find that even the triple combination of an
active call, a held call, and a call waiting is easy to manage.
The following points summarise the more common situations:
• To end the active call, press O. If you have a call on hold it
is automatically connected.
• To put the active call on hold and make another call, press
M and select the Hold Call option, then press M
again and select the Make New Call option
2
.
• To put the active call on hold and reconnect a held call, press
M and then select the Switch? option.
• To accept a waiting call, press O. The active call will be
placed on hold. If you prefer to end the active call before
accepting the waiting call, press M and select the End Active Call option, or End Held Call option as
appropriate.
• To reject a waiting call, press M and select the Reject Call Waiting option (or simply press C).
If you have an active call, a call on hold and a call waiting, you
A
cannot accept the waiting call until you end either the active
call or the held call.
Call Holding and Call Waiting Messages
During Call Holding and/or Call Waiting operations, your phone
may display one or more of the following messages:
Trying
A request to hold the active call, or swap the active call with a
held call, has been made.
or
A request to reconnect the held call has been made.
Hold Failed
The request to hold a call has been unsuccessful.
Cannot Hold Second Call
2. A quicker method of making another call is to enter the number to be
called directly. As soon as you press the first digit, the display will
change to
press, but if you press
current call on hold and attempt to call the number entered.
. This will disappear three seconds after the last key
A call is already on hold, you cannot place two calls on hold at
the same time.
Reconnect Failed
The held call could not be made active again.
Busy Try Later
Your phone is still working on a previous command. Wait a
short time before repeating the command.
Anonymous
The person who is calling you has blocked their number from
appearing on your phone.
Unavailable
The network is unable to provide the caller’s number.
O
Call Barring
Call barring is a network feature which can be used to selectively
bar outgoing and incoming calls.
If you change the barring setting, you may be asked to enter your
barring password. There will be a short delay while the phone
notifies the network of the new setting. When the change has
been made by the network, the phone will display a confirmation
message.
The initial password will be supplied to you by your Cellular
Service Provider when you subscribe to this service.
AThis option may be affected by the Fixed Dialling setting.
Bar Outgoing Calls
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
Int'l Calls
When selected, this option will bar outgoing international calls.
Int'l Calls Except Home
When selected, this option will bar outgoing international calls,
except those to your home country.
All Calls
When selected, this option will bar all outgoing calls, except
emergency calls.
Off
When selected, this option will disable all call barring for
outgoing calls.
After selecting this option, there will be a short delay while the
phone asks the network for the current setting.
When Roaming
When selected, this option will bar incoming calls when you are
roaming.
You may wish to select this option, as some Cellular Service
Providers charge an additional fee for receiving calls when you
are roaming.
All Calls
When selected, this option will bar all incoming calls.
Off
When selected, this option will disable all call barring for
incoming calls.
Change Bar Password
This option can be used to change the call barring password.
After selecting this option, you will be asked to enter the current
password.
You will then be asked to enter, and then re-enter, your new, 4
digit, barring password. When the change has been made by the
network, the phone will display a confirmation message.
Key Answer Only
This feature has two options: On or Off.
When set to On, this feature allows the phone to be opened
without answering an incoming call. This means that if your
network supports Caller Line Identification, you will be able to
review the number or name of the person who is calling you
before deciding whether or not to answer it. The call can be
answered by pressing an appropriate key (O, 1 to 9,
* or >). To reject the call, press C.
When set to Off, opening the phone answers an incoming call.
These are text messages that are sent specifically to and from
your phone number.
When an SMS message is received, your phone:
1 Makes three short alert tones (depending on the ‘Ring or
Vibrate’ setting).
2 Displays the o (messages) icon.
3 Stores the message for later viewing, if there is space. If there
is not enough space, the o icon will flash. One or more
messages must be removed before the message can be
stored.
4 To find out how to remove the o icon, see
and o icon.
Your Cellular Service Provider will transmit a message for a
limited amount of time. If a memory location is not made
available before the message is removed from the network, then
you will not be able to receive or read it.
5 Message will then be displayed with the prompt; Read Now?
6 If O is pressed, the phone will enter the Received
Your phone supports the two GSM message features: Short
Message Services (SMS) and Cell Broadcast.
Messages browser and immediately display the new message.
7 If C is pressed the phone will return to the screen which
was displayed prior to receipt of the message.
8 If any other key is pressed it will perform the function linked
9 If no key is pressed the display will time-out after 1 minute
and return to the screen which was displayed prior to receipt
of the message.
Cell Broadcast Messages
These are general messages, broadcast to a group of phones and
can only be received when your phone is in standby mode.
These messages are broadcast in numbered 'channels' and, in
general, each channel will tend to carry one particular type of
information.
Typical cell broadcast channels could have information on local
weather conditions, traffic reports or stock market prices. Please
contact your network operator for a list of available channels and
the information they supply.
When the message has scrolled across the display, the beginning
of the message will be shown until you either remove it or a new
message arrives.
How to Read SMS Messages
You can use the scroll keys (M, < and >) to scroll
through messages in either the Received Messages or Outgoing
Messages lists.
To display a specific message, enter the message number, for
example press 5 to display the 5th message. If the message
does not exist, Invalid Msg Number will be displayed.
Alternatively, to display the next message, press O and select
Go To Next Message.
How to Create and Edit SMS Messages
Use the Message Editor to create or modify text messages. When
you enter the editor, the last message that was edited will be
displayed. Press and hold C to clear the message and start a
new one, or modify the message displayed. For an explanation of
how to enter text, see ‘How to Enter Alphabetic Characters’ in
the The Phone Book Menu section.
Press O once you have completed your message. You will
then be presented with the following options:
Send Message - If you select this option you will be
prompted for a phone number, enter the number and then
press O to send the message.
Store Message - Select this option to store your edited
message in your Outgoing Messages list.
AIf you don’t store the message after it has been edited, you
will lose all your changes as soon as you select another
message to be edited.
O
Call Voicemail
Once selected, this option will leave the Messages menu and
automatically make a phone call to the current voicemail number.
The display will show Calling and standard call operations can
be performed.
The voicemail phone number can be entered by selecting the
‘Voicemail Number’ option in the ‘Message Settings’ sub-menu.
This option is used to view and manage any SMS messages that
have been sent to your phone number.
When selected, this option will display a message indicating the
total number of messages and how many of these are new. If
there are no messages No Messages will be displayed.
If there are messages, the new messages will be displayed first,
followed by the old. Repeated presses of the M key will
display the whole message, when it was sent and the phone
number who sent it (if available).
Once you have read a new message it will automatically become
old.
See ‘How to Read SMS Messages’ for more information on
navigating through the messages.
Press the O key, when viewing any message, to enter the
‘Delete Message‘, ‘Return Call', ‘Edit Message’ and ‘Go to Next
Message‘ sub-menu.
Delete Message and o icon
This option will delete the currently viewed message together
with its icon.
Return Call
This option can be used to call the person who sent you the
message, if their number has been included by the network, or a
number that has been included in quotes “” in the message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
and/or store it in your Outgoing Messages list. See ‘How to
Create and Edit SMS Messages’ for more information on using
the Message Editor.
Go to Next Message
This option will display the next received message.
If you are currently reading the last message in your list then this
This option is used to view and manage any outgoing messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed
followed by the first message in the list.
AYou cannot send an outgoing message until the Message
Service Centre number has been set. See ‘Message Settings’.
Press the O key, when viewing any message, to enter the
‘Send Message‘, ‘Edit Message’, ‘Delete Message’ and ‘Go to
Next Message‘ sub-menu. See ‘How to Read SMS Messages’ for
more information on navigating through the messages.
Send Message
If you select this option you will be prompted for a phone
number, enter the number and then press O to send the
message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See ‘How to Create
and Edit SMS Messages’ for more information on using the
Message Editor.
Go to Next Message
This option will display the next outgoing message.
Delete Message and o icon
This option will delete the currently viewed message together
with its icon.
Message Editor
The Message Editor is used to edit the currently selected message
and then to either send the modified message or store it in your
Outgoing Messages list. See ‘How to Create and Edit SMS
Messages’ for more information on using the Message Editor.
Cell Broadcast
This option is used to set the cell broadcast settings. The option
has two settings On or Off.
If you change the setting to On, you will be asked to enter the
channel you wish to receive information from.
Please contact your Cellular Service Provider for a list of available
channels and the information they provide.
While a broadcast message is scrolling across the display you can
stop and start it by pressing *. Press # to restart the
message from the beginning. If you want to remove the message
from the display, press C followed by O.
If you need to use the * and # keys for their normal
A
functions while you are receiving a cell broadcast message,
you must first remove the message.
This option is used to enter a phone number which will be used
by the ‘Call Voicemail’ option.
If there is already a Voicemail Number, this will be shown in the
display. This can be used, modified or deleted as desired.
Service Centre
Before you can send any messages you must use this option to
enter your Message Service Centre number. This number is
obtained from your Cellular Service Provider.
Expiry Period
You can use this option to specify the maximum time, in hours,
that your unforwarded messages are to remain with the Message
Service Centre before being deleted. When you select this option,
the current expiry period will be displayed (the default is 24
hours).
The maximum value you can enter is 10584, though the real limit
will depend on your Message Service Centre.
Outgoing Message Type
This option is network dependent and can be used to specify the
format of your outgoing messages. You can select from the
following message types: Text (default), Fax, X400, Paging,
E-Mail, ERMES or Voice.
AYou do not need to select Voice to send messages to
This option is used to set the incoming call ring tone volume.
When selected, the phone rings, and the volume meter will be
displayed as follows:
After selecting this menu item, adjust the volume by pressing the
volume keys on the side of your phone.
The meter disappears after a short time, or by pressing O or
C.
Alternatively, you can simply press the quick access key (E)
and increase or decrease the ring volume with the up/down
volume keys on the side of your phone.
English
Using the Options Menu
58
Ring or Vibrate
This option sets the way your phone alerts you to an incoming
call. The options are:
• Ring Only - the phone will ring with the tone specified by
the Set Ringer Tone option.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and then
ring.
This option is used to set, and change, the PIN code.
The PIN code can be set to protect your SIM Card from
unauthorised use. If set to On, access to your SIM Card will be
restricted each time it is inserted or the phone is turned on.
The option has two settings, On or Off.
AIf the SIM Card does not support PIN code disabling, these
items will not appear.
Change SIM PIN Code
This option is used to change the SIM Card PIN code.
The 'Require SIM Card PIN' option must be set to On and you
must enter the old PIN code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN code. The new PIN code must be entered
again as confirmation.
!
If the PIN number is entered incorrectly three times in a row,
your SIM Card will automatically lock-up and the Blocked
message will be displayed.
Unblocking Your Phone
If you receive the Blocked message you will need to enter an
unblock code and key sequence before you can use the phone.
The 8 digit PIN unblocking code will have been provided with
A
your SIM Card by your Cellular Service Provider.
Enter the following key sequence to unblock your phone:
* * 0 5 * Unblock Code O
New PIN Code O New PIN Code O
The new PIN code must contain four to eight digits.
!
If this operation is performed incorrectly 10 times in a row,
your SIM Card will become permanently blocked.
Change SIM PIN2 Code
This option is used to change your PIN2 security code.
When you select this option you must enter the old PIN2 security
code before you can proceed.
You will be asked to enter a new, four to eight digit code to
replace the old PIN2 security code. The new PIN2 security code
must be entered again as confirmation.
!
If the PIN2 security code is entered incorrectly three times in a
row, the Blocked message will be displayed.
When the Blocked message is displayed, you are not allowed
access to menu items that require you to enter the PIN2 code, for
example ‘Setup Fixed Dialling’ and ‘Call Charge Settings’.
If you receive the Blocked message when you try to enter your
PIN2 code, you will need to unblock and change the code using
the following key sequence:
**052*Unblock CodeO
New PIN2 Code O New PIN2 Code O
AThe 8-digit unblocking code will have been provided with your
SIM Card by your Cellular Service Provider.
!
If the PIN2 unblocking operation is performed incorrectly 10
times in a row, your PIN2 code will become permanently
blocked.
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set at
manufacture to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
AIn order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
OExtended Menus
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off.
Show Time and Date
When selected, this option displays the time and date until any
key is pressed.
OSet Time and Date
This option is used to set the time and date. You will be
prompted to Enter Time - the time must be entered in 24-hour
format. You will then be prompted to Enter Date.
O
Set Time Format
This option is used to set the clock to either 12-hour or 24-hour
format.
O
Language Selection
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
Battery Saving Mode
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
The option has two settings, On or Off.
O
Select Keypad Tones
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings, Normal Tones, Single Tone
or No Tones.
This option can be used to view the current setting of menu
options.
When selected, your phone will display the list of menu items
that you have changed from the default setting.
Master Reset
! This option should be used with caution.
This option is used to restore certain phone options to their
original settings.
When selected, you will be asked to enter the security code.
Once entered, the master reset option will perform the following
operations:
• Cancel Automatic Answer, Audible Call Timers, In-Call Display
Meter, Battery Save (DTX), Auxiliary Alert, Automatic
Handsfree, Automatic Lock, Cell Broadcast and Talk and Fax
Mode.
• Return Language Selection to Original.
• Restore Keypad Tones to Normal, Ringer Tones to Standard,
Volume Level to the middle of its range and Network Search
frequency to Medium.
• Reset the expiry period for SMS messages to 24 hours and the
Message Type to Text.
Master Clear
! This option should be used with extreme caution, for example
it will clear all the Phone Book entries from your phone
memory.
This option is used to restore certain phone options to their
original settings.
When selected, you will be asked to enter the security code.
Once entered, the master clear option will perform the same
operations as 'Master Reset', plus the following operations:
• Clear the Phone Book entries from phone memory (not from
SIM memory)
• Clear the Last Calls Made and Last Calls received list
In order for the phone to make and receive phone calls, it must
register with one of the available networks.
Your phone automatically searches for the last network used. If,
for any reason, this network is unavailable, your phone will
attempt to register with a new network.
When your phone needs to register with a new network, it will
generate a sorted list of networks.The network list is sorted in the
following order:
• The Home network.
• Networks from a preferred list.
• A random list of other networks found above a certain signal
strength.
• All remaining networks in descending order of signal strength.
Any forbidden networks, stored in the SIM Card, will not be
included in the sorted list.
Available Networks
When selected, this option will scan to see which networks are
operating in your current location. When you see a network you
wish to register with or store in your preferred list, press O.
You will now enter the 'Register Now' and 'Make Preferred' submenu.
Once selected, your phone will try to register with the selected
network. If the registration fails, your phone will try to register in
the normal way.
Make Preferred
Once selected, you will be asked where the selected network is to
be located in the preferred list.
Network Search
These options determine how often your phone tries to register
with a network and how the attempt is made.
Registration Preferences
This option determines how the phone tries to register with a
network.
The option has two settings, Automatic Search or Manual Search.
Automatic Search Mode
In the automatic mode, the phone will try to register with the
first network in the sorted list. If this is successful, your phone will
display the network name and then enter the standby mode.
If registration is unsuccessful with one network in the list, your
phone will try the next listed network. If your phone fails to
register with any of the listed networks, it will start at the
beginning of the list after a preset period. The preset period is
determined by the 'Frequency Of Search' option.
Manual Search Mode
In the manual mode, the phone will present you with the sorted
list of networks. Your phone will try to register with the selected
network. If this is successful, the phone will display the network
name and then enter the standby mode.
If registration is unsuccessful, your phone will present the list
again after a preset period. The preset period is determined by
the 'Frequency Of Search' option.
Frequency Of Search
This option is used to determine how long your phone waits
before attempting to re-register after a registration attempt has
failed.
The option has the following settings: Slow Search, Medium Search, Fast Search or Continuous Search .
! Fast and Continuous Search may use up a significant amount
This option enables you to add networks to your preferred list.
When selected, the 'Choose From Available' option will scan to
see which networks are operating in your current location. When
you see a network you wish to store in your preferred list, press
O. You will be asked where the selected network is to be
located in the preferred list.
The 'Choose From Known' option will, when selected, present
you with a preset list of networks. When you see a network you
wish to store in your preferred list, press O. You will be asked
where the selected network is to be located in the preferred list.
Select the 'Add New Network Code' option to enter network
codes directly. Once entered, you will be asked where the
network is to be located in the preferred list.
Show List Of Networks
This option is used to display the networks you have stored in
your preferred list. In addition, pressing O will select the
currently displayed entry and enter a move/delete sub-menu.
When 'Move to New Location' is selected you will be asked to
enter a new location for the selected network.
When selected, 'Delete Selection' will remove the selected
network from the preferred list.
Find New Network
When selected, the phone will try to register with a network in
the normal manner, with one exception. When the registration
attempt is made, your current network will be excluded from the
list of those available. If the attempt fails, your phone will then try
to re-register with the previous network.
Your phone has an internal metering system which can be used
to provide you with individual and total call times or costs.
ACall cost information is only available if you receive the Advice
of Charge service. If you do not receive this service, then only
time meters are available.
The meter can be displayed during a phone call and audible
tones can be generated to indicate the passage of call time.
Your phone can handle values up to 21 digits long, although
during calls it can only display the last 12 digits. If the value
exceeds 21 digits, then Too Large is displayed.
In addition, you can set a maximum charge limit so that your
phone will monitor either the number of units used or the call
cost, and then not allow the limit to be exceeded.
Show Call Charges
This feature allows you to display the cost of your calls or the
amount of credit remaining. The figures are in phone units or
currency depending on the setting of the Set Charge Type
option.
Show Call Charges is only available if you receive the Advice of
Displays the cost of all your chargeable calls since the charge
meters were reset to zero using the ‘Reset Call Charges’ option.
Credit Remaining
Displays the difference between your total call costs and the limit
specified by the ‘Set Total Charge Limit’ option. If there is no
limit, No Charge Limit Set will be displayed.
Show Call Timers
This feature allows you to display the duration of your calls and
to reset your time meters to zero.
If you receive the Advice of Charge service then all calls are
timed. If you do not receive the Advice of Charge service then,
depending on the model, either all calls or only outgoing calls are
timed.
Show Last Call
Displays the duration of your last call.
Total For All Calls
Displays the duration of all your calls since the time meter was
reset to zero using the ‘Reset All Timers’ option.
Reset All Timers
Sets the resettable time meters to zero. The Lifetime Meter is not
resettable.
O
Set Audible Call Timers
Your phone provides two programmable audible call timers:
• The 'Single Alert Timer' will sound a beep just once during a
call, after a preset time has elapsed.
• The 'Repetitive Timer' will sound regular beeps during a call,
at preset intervals.
In both cases, the timers will sound their beeps ten seconds
before the end of the programmed time.
Set In-Call Display
This feature allows you to specify whether the time or charge
meters are displayed during a call. If you do not have the Advice
of Charge service, then only the time meter is available.
If a total charge limit has been set, then the in-call display
A
always shows your remaining credit.
Show Time Per Call
This option is used to display the time meter during calls. If you
receive the Advice of Charge service, only the chargeable calls
will be displayed.
Show Charge Per Call, Show Total Call Charges
AThese menu items are only available if you receive the Advice
of Charge service.
These options are used to display the call charges meter during
and after chargeable calls. The meter shows phone units or
currency depending on the setting of the ‘Set Charge Type’
option.
This option switches off in-call display of the charge/time meter.
Call Charge Settings
This feature allows you to customise your Advice of Charge
settings. You will be prompted to enter your PIN2 security code
before you can access the options.
This menu item is only available if you receive the Advice of
A
Charge service.
Reset Call Charges
This option resets your charge meters to zero.
Set Total Charge Limit
This option sets the maximum limit for call charges; once this
limit has been reached, the network will refuse any further
chargeable calls.
If you switch the charge limit On, you will be prompted to enter a
new limit. Enter the amount as either units or currency
depending on the setting of the Set Charge Type option.
Units must be entered as whole numbers.
AWhen the charge limit is On, you will not be able to make fax
or data calls.
Once a limit is set, the in-call display will show the remaining
credit. When you reach your last two minutes, the warning
message Approaching Charge Limit will be displayed and a
warning alert will sound. The sound will be repeated when one
minute remains. When the limit is reached the message Charge Limit Reached will be displayed and you will not be able to
make any more chargeable calls.
Once the limit is reached the Total Charge Limit will need to be
reset or switched off before any chargeable calls can be made.
Select Off to switch off the charge limit.
Set Charge Type
This option defines whether charge information is displayed as
either phone units or currency.
Units
Sets the charge type to phone units.
Currency
Sets the charge type to currency. You will be prompted to enter
the Currency Name. Enter a 3-character notation, for example
GBP for the UK, DEM for Germany or FFR for France. You will
then be prompted for the Charge Per Unit. Enter the amount
and press O.
Lifetime Timer
This option is used to display the total time of all calls made on
your phone.
This meter can not be reset, the 'Reset All Timers', 'Master Reset'
or 'Master Clear' options have no effect.
Car kits can provide charging facilities and some provide
connection to an external antenna for better reception. Your
phone can also be linked to external microphones and speakers
for hands free operation.
Your phone provides several options to complement the use of
car kits.
O
Mute Car Radio
Mutes your car radio when you make, or receive a call, when
your phone is attached to the car kit. It must be enabled by your
local dealer.
This option will have no effect if your car radio does not have
A
a mute feature, or if the car kit installation does not support
this option.
Automatic Answer
Allows your phone to automatically answer an incoming call after
two rings.
If this option is On, we recommend that the 'Ring or Vibrate'
A
‡ Availability depends on the type of car kit installed or whether
you have a headset connected to the phone.
You will only be able to access this menu when your phone is
mounted in a car kit.
option be set to Ring Only.
Automatic Handsfree
Used in conjunction with the ‘Automatic Answer’ option and a
car kit, to transfer call conversation to external microphones and
speakers. It is available only with selected car kits. Contact your
Motorola representative for further details.
Used to leave the phone on for a set period after the vehicle
ignition has been turned off. This prevents the vehicle's battery
from becoming drained and saves you from having to re-enter
PIN and Unlock codes after every short stop.
As standard the 'Safety Timer' is set to 60 minutes. Once
selected, this option can be adjusted to any value between zero
and 999 minutes. When set to zero, this option is effectively
switched off.
Auxiliary Alert
Alerts you of an incoming call by flashing your vehicle lights, or
by sounding the horn. It must be enabled at installation time.
Some local regulations prevent the use of this option and,
A
accordingly, this option may not be present on your phone.
To use a Quick Access feature, press the quick access key (E)
followed by the number of the feature, or press < or > to
scroll through the menu and then press O.
You can change the features, and the positions of the features,
available in the Quick Access menu - see ‘Customising the Quick
Access Menu’.
Each Quick Access feature is represented by an icon as well as the
feature name. The currently selected icon is shown with a dark
background.
B
Find Name
Enter the first three characters of the name and press O. The
first matching entry in the Phone Book will be displayed. Press
O to call the number.
U
Outgoing SMS
Your newest message will be displayed; you can then read, send,
delete and edit messages as normal. See ‘Outgoing Messages’
for more information.
The menu shown above represents the default features
A
supplied with your phone.
Although the features in your phone are available through easy
access menus, some of the most commonly used features are
also available in the Quick Access menu. Each feature in the
menu is allocated a number from 1 to 9.
R
Call Voicemail
Your phone will make a call to your voicemail number.
AYou must have defined a Voicemail number in order to use
A bar graph indicating the approximate battery charge level will
be displayed. The more bars displayed, the greater the charge
level.
See ‘Show Battery Meter’ for more information.
H Lock Now
Prompts you to confirm that you want to lock the phone. If this is
given, your phone becomes locked and you will not be able to
use it again until the unlock code is entered.
See ‘OPhone Lock’ for more information.
Mute Phone
J
Temporarily turns the microphone off during a phone call.
Reselect this option to resume your conversation.
K
Read Messages
Your newest message will be displayed; you can then read,
delete and edit messages as normal. See ‘OReceived Messages’
for more information.
L
Vibrate On/Off
VibraCall™ will be switched either on or off depending on the
current setting. If VibraCall™ is switched on, the ‘Ring or Vibrate’
setting changes to Vibrate Only. If VibraCall is switched off,
the ‘Ring or Vibrate’ setting changes to Ringer Only. See ‘Ring
or Vibrate’ for more information.
P
Divert On/Off
Unconditional call diversion will be switched either on or off
depending on the current setting.
You must have defined a diversion number using the ‘Divert
A
All Calls’ option in the Call Diverting menu in order to use this
feature.
You cannot switch call diverting on or off if you are outside GSM
coverage.
The remaining quick access options are not included in the
default menu supplied with your phone. Refer to Customising the Quick Access Menu for information on how to create your own
menu.
D
Find Location
Enter the location number and press O. The first matching
entry in the Phone Book will be displayed. Press O to call the
number.
F
Add to Phone
Enter a phone number and then a name.
If you already had a number displayed, it will automatically be
A
re-displayed when you select this feature.
The number will be stored in the next available phone memory
location. See ‘Add Entry’ for more information.
If you already had a number displayed, it will automatically be
A
re-displayed when you select this feature.
The number will be stored in the next available SIM Card
location. See ‘Add Entry’ for more information.
N Adjust Ring
Displays and sets the incoming call ring-tone volume. Press the
quick access key, then set the volume with the volume up/down
buttons.
V Switch Memory
Switches one-touch dialling between the phone and SIM
memories depending on the current setting.
a
Message Editor
The last message edited will be displayed. Press and hold C to
clear the message and start a new one, or modify the message
displayed. See ‘How to Create and Edit SMS Messages’ for more
information.
W
Received Calls
Displays the first entry in the Last Calls Received list. You can
scroll through the list and call the numbers as normal. See ‘Last
Calls Received’ for more information.
Y
Call Timer
Displays the duration of your last chargeable call. See ‘Show Call
Timers’ for more information.
Z
Talk and Fax
Switches Talk and Fax on for the next call only. See ‘Talk and Fax’
for more information.
b Show My ID
Your phone number will be sent with the next attempted call;
after this your phone number will not be sent until you reselect
this option.
c Restrict My ID
Your phone number will not be sent with the next attempted
call; after this your phone number will be sent until you reselect
this option.
e Key Answer Only
Disables open-phone answering. When the phone rings, you can
open the phone and see the caller’s identity on the display,
before deciding whether or not to answer. To answer the call,
press a key.
X Call Charge
Displays the cost of your last chargeable call. See ‘Show Call
Charges’ for more information.
The following accessories have been designed to work with your
phone. Additional accessories may be available and are packaged
separately. Please refer to your local service provider or retail
outlet for more information.
Desktop Charger (SPN4520)
The Desktop Charger allows you to charge a phone with a
battery attached and a spare battery at the same time. The
charging status for each battery is indicated by LEDs at the front
of the charger.
AThe Desktop Charger must be used with the power adapter
(SPN4278).
Power Adapter (SPN4278)
The power adapter (charger) connects to the Desktop Charger or
directly to the phone. When connected directly to the phone, it
charges the battery and also provides dead battery operation.
Cigarette Lighter Adapter (SYN4241)
The Cigarette Lighter Adapter connects to your phone and allows
you to charge your phone's battery while driving. When the
phone is in use, the adapter overrides the battery therefore
preserving battery life. The adapter also provides dead battery
operation.
The Cigarette Lighter Adapter is also available with a connection
to an external antenna (SLN 9934).
Standard Handsfree Car Kit (CD1261)
The Handsfree Car Kit allows you to safely operate your phone
while driving. The car kit provides a responsive directional
microphone and direct antenna connection. While connected to
the phone, the car kit also charges the battery.
Deluxe Handsfree Car Kit (CD1259)
The Deluxe Handsfree Car Kit is the same as the Standard
Handsfree Car Kit and also includes an external handset.
Headset (SLN3940)
When connected to the phone, the headset with earpiece
enables handsfree operation.
You can connect or disconnect the headset during a call without
interruption. See The Smart Button for more information.
Adapter Plugs
Each Adapter Plug connects the Power Adapter to a different
mains power outlet:
UK Adapter PlugSYN6718
European Adapter Plug SYN4655
US Adapter PlugSYN4657
Australia/New Zealand
CELLect™ PC Cards allow you to send and receive data and fax
calls using your phone and a computer with a PCMCIA Type II
slot. CELLect
book and send SMS messages direct from your PC with the
appropriate software.
The CELLect™3 card also contains a landline modem for
connection to the conventional telephone network. This gives
you both wired and wireless connection options in a single PC
card.
A cable, SKN4821, is required to connect the PC Cards to the
Check the battery. Is it charged, properly fitted and are the contacts clean and dry? See ‘Important Battery
Information’.
Check the antenna. Is it fully extended?
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in a
building, move closer to a window.
Check the Network Selection settings. Try Manual Selection, or try another network. See ‘Network Search’.
Check your Operator coverage map.
Is Restricted displayed? Check the Call Barring and Fixed Dialling settings.
Has the call charge limit been reached? Use your PIN2 code to reset the limit or contact your Service Provider.
See ‘Set Total Charge Limit’.
Has a new SIM card been inserted? Check that no new restrictions have been imposed.
Check the antenna. Is it fully extended?
Check the signal strength meter in the display. If the signal is weak, move to an open space or, if you are in a
building, move closer to a window.
Check the Call Diversion and Call Barring settings.
Check the Ringer and VibraCall settings. If both are off, there is no audible alert. See ‘Ring or Vibrate’.
Have you inserted a new SIM card? Enter the new PIN code. See ‘Entering Your SIM Card PIN Code’.
Do you have a replacement phone? Enter the default phone unlock code - 1234.
Have you forgotten the unlock code? Press M to change the unlock code (you will need your security
code).
Enter the PIN unblocking code supplied with your SIM card (see ‘Unblocking Your Phone’).
Enter the PIN2 unblocking code supplied with your SIM card (see ‘Change SIM PIN2 Code’).
Is the card inserted the right way round? See ‘SIM card Insertion’.
Is the gold Card visibly damaged or scratched? Return the card to your Service Provider.
Check the SIM contacts. If they are dirty, clean them with an antistatic cloth.
Check the charger. Is it properly connected? Are its contacts clean and dry? See ‘Your Battery’.
Check the battery contacts. Are they clean and dry?
Check the battery temperature. If it is warm, let it cool before recharging.
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Are you in an area of variable coverage? This uses extra battery power.
Is your antenna fully extended? This helps use less battery power.
Is it a new battery? See ‘Charging a New Battery’
Is it an old battery? Battery performance will decline after several years use. Replace the battery.
Is it a battery that hasn’t been completely discharged? Allow the battery to fully discharge
(until the phone turns itself off) and then charge the battery overnight.
Check that the Frequency Of Search feature in the Network Selection menu has not been set to Fast or
Continuous. See ‘Network Search’.
Check that the Battery Saving Mode feature has not been set to Off.
Are you using your phone in extreme temperatures? At extreme hot or cold temperatures, battery
performance is significantly reduced.
Wait until you are in an area with good network coverage and try again.
There is not enough memory available to store another SMS message. Use the Messages menu to delete one
or more existing messages.
Some Service Providers automatically bar the ability to make international calls. Contact your Service Provider.
Have you included the relevant codes? Press and hold 0 to display the international dialling prefix (+) and
then enter the appropriate country code followed by the phone number.
Call charge settings
Call diverting
Call holding
Call metering
Call meters menu
Call related features menu
Call timers
Call Transfer
Call Voicemail
Call voicemail
Call Waiting
Call waiting
Calling a number
Cancel all diverting
Capacity
Checking battery capacity
Checking Phone Book capacity
Cell broadcast
Messages
Change bar password
Change SIM PIN2 code
............................................67
..............................68
................................. 47, 72
.................................. 29, 50
.......................................66
.................................66
...................46
.........................................32
......................................54
.......................................73
.........................................27
................................... 29, 50
.................................22
........................ 49, 72
................46
........42
......................................56
........................................54
..........................52
.........................60
Change unlock code
Characters
Charge meters
Resetting
Check capacity (of the Phone Book)
Conference Call
End Active And Held
Hold Call
Make a New Call
Reconnect
Reconnect Held Call
Restrict My Number
Split Call
Switch
Conference Call and Call Waiting
...........................................39
.........................................68
.........................................27
..........................................28
.............................................28
............................59
...................................28
........................28
.............................27
.......................................28
........................28
.........................27
D
Data calls
Accessories
Delete
Last ten calls
Message
Phone book entries
Desktop charging of your battery
Detailed diverting
Dialling phone book numbers
Display
Display characters
In use symbol .......................................12
Initiating Transfer Call
International phone calls
..........................32
......................24
K
Key answer only ...................................52
Keypad tones
Selecting
..........................................61
L
Language selection ...............................61
Last ten calls
Lifetime timer
Lock now
Low battery warning
..................................43, 73
.......................................68
......................................59, 72
............................15
M
Making a phone call .............................22
Master clear
Master reset
Menu navigation
Menus
Accessory setup menu
Call meters menu
Call related features menu
Extended menu
Messages menu
Network selection menu
Options menu
Personalised menus
Phone book menu
.........................................62
.........................................62
..................................33
.....................69
............................66
...............46
...............................35
...............................53
..................63
..................................37
.........................35
...........................40
Phone setup menu
Quick Access menu
Short menu
Message editor
Message settings
Messages
Quick access menu ...............................71
Customising
....................................74
R
Reading SMS messages ........................54
Received messages
Receiving a phone call
Removing your battery
Require SIM card PIN
Restrict My Number
Restrict my phone number
Return call
Ring or vibrate
Ring tones
Roam symbol
Select keypad tones
Sending SMS messages
Service centre
Set audible call timers
Set in-call display
Set ringer tone
Setup fixed dialling
Short menu
Short message service symbol
Show battery meter
Show call charges
Show call timers
Signal strength symbol
SIM card
Insertion
PIN code
PIN2 code
Release button
SIM Card PIN Code
Smart button
Smart Button, using
SMS messages
Special keys
Split Call
Status review
Switch
Symbols