SPECIFICATION SHEET
PR1500
Professional Series Two-Way Radio
32 Channels
Large Raised Channel and
On/Off Volume Knobs
Easy to operate with gloves
3 Position Concentric Switch
Allows customization of radio
features
Programmable
Emergency Button
Alerts dispatcher in emergency
Sealed Accessory Connector
Backward compatible with
existing accessories
Enhanced Audio Features
Noise reduction software
and Audio Gain Control (CPS
programmable) allow audio
customization
Adjustable Power Levels
Help preserve battery life
Priority/Dynamic
Priority Channel Scan
Frequently scan higher priority
channels. Easily add or delete
scan list members
Monitor/Permanent Monitor
Allows continuous channel
monitoring
3 Programmable Side
Buttons and Large Textured
Push-To-Talk Button
Easy access to favorite features
and good tactile response. Easy
to operate when wearing gloves
IMPRES™
Energy System
Standard Package includes
an IMPRES charging and
reconditioning system, a help in
automating battery maintenance, optimizing battery cycle
life, and maximizing talktime
PR1500
Standard Package
• IMPRES
NiMH 1850 mAh Battery
• IMPRES
Single Unit Rapid Charger
• VHF or UHF Antenna
• 2.25 Inch Belt Clip
• Remote Speaker
Microphone Adapter
• Accessory Connector
Dust Cover
• User Guide CD
• 2-Year Standard Warranty
Additional Features
Send and receive information in
a variety of ways:
Quik-Call II™
and MDC1200 Signaling
• Selective Call (Decode)
Receive a call from
a specific group or individual
• Call Alert (Decode)
Receive alerts of incoming
calls when a short distance
from your radio
MDC1200 Signaling Only
• Push-to-Talk ID (Encode)
Identify outgoing calls.
• Radio Check (Decode)
Lets others check users
radio status
• Emergency (Encode)
Alerts dispatcher in urgent
situations
• Selective
Radio Inhibit (Decode)
Allows system owner to
disable stolen or missing
radios
When it comes to public safety, a community
shouldn’t settle for “good enough.”
And neither should those who work tirelessly to
keep our community safe and secure. That’s why so
much innovation went into designing the PR1500
Professional Series two-way radio from Motorola.
The housing and control knobs of the PR1500 are
rugged and tough. But what really sets this radio
apart is how it performs. You’ll notice a rich, full
audio that can be customized for your ear as well
as the environment. The PR1500 also offers
enhanced performance that delivers wide range and
improved battery life.
P25 Conventional Upgradeable
With a single software upgrade, the PR1500
becomes P25 interoperable. This essential feature
gives you the ability to interact with other networks
in times of crisis.
SPECIFICATION SHEET
PR1500 PROFESSIONAL SERIES
Two-Way Radio
GENERAL SPECIFICATIONS
VHF UHF R1 UHF R2
Channel Capacity 32 32 32
Model Numbers AAH79KDC9PW5_N AAH79QDC9PW5_N AAH79SDC9PW5_N
FCC Designation AZ489FT3807 AZ489FT4865 AZ489FT4866
FCC Emissions Designators 11KOF3E, 16K0F3E, 8K10F1E, 8K10F1D
Power Supply Rechargeable nickel-cadmium, or IMPRES nickel-metal hydride battery
Dimensions (HxWxL) 6.00 x 2.30 x 1.50 inches
Weight with NiCD Battery 19.85 oz
with FM NiCD Battery 19.85 oz
with IMPRES NiMH Battery 20.63 oz
with FM IMPRES NiMH Battery 20.63 oz
Average Battery Life High Power (5W)
@ 5-5-90 Duty Cycle* with High Capacity NiCD 8 hours
with High Capacity NiCD FM 8 hours
with High Capacity NiMH 10 hours
with High Capacity NiMH FM 10 hours
* 5% receive, 5% transmit, 90% standby
TRANSMITTER
Typical Performance Specifications
VHF UHF R1 UHF R2
Frequency Range 136-174 MHz 380-470 MHz 450-520 MHz
Channel Spacing 12.5/25 kHz 12.5/25 kHz 12.5/25 kHz
Maximum Frequency Separation Full Bandsplit Full Bandsplit Full Bandsplit
Rated RF Output Power Adj* 1 to 5 W 1 to 5 W 1 to 5 W
Frequency Stability*
(–30°C to +60°C; +25°C Ref.) ±0.00025% ±0.0 002% ±0.0002%
Modulation Limiting*
25 kHz channel ±5.0 kHz ±5.0 kHz ±5.0 kHz
NPSPAC channel N/A N/A N/A
12.5 kHz channel ±2.5 kHz ±2.5 kHz ±2.5 kHz
Emissions*
(Conducted & Radiated) –65 dBc –70 dBc –70 dBc
Audio Response*
(6 dB/Octave Pre-emphasis
from 300 to 3000 Hz) +1, –3 dB +1, –3 dB +1, –3 dB
FM Hum & Noise Radio*
25 kHz –46 dB –45 dB –45 dB
12.5 kHz –42 dB –40 dB –40 dB
Audio Distortion* 1% 2.0% 2.0%
* Measured in the analog mode per TIA/EIA 603.
Specifications subject to change without notice.
136-174 MHz 380-470 MHz 450-520 MHz
RECEIVER
Typical Performance Specifications
VHF UHF R1 UHF R2
Frequency Range 136-174 MHz 380-470 MHz 450-520 MHz
Channel Spacing 12.5/25 kHz 12.5/25 kHz 12.5/25 kHz
Maximum Frequency Separation Full Bandsplit Full Bandsplit Full Bandsplit
Audio Output Power at Rated* 500 mW 500 mW 500 mW
Frequency Stability*
(–30°C to +60°C; +25°C Ref.) ±0.00025% ±0.0 002% ±0.0002%
Analog Sensitivity*
12 dB SINAD .25 µV .25 µV .25 µV
Selectivity*
25 kHz channel –80 dB –73 dB –73 dB
12.5 kHz channel –63 dB –63 dB –63 dB
Intermodulation* –78 dB –73 dB –75 dB
Spurious Rejection* –80 dB –75 dB –75 dB
FM Hum and Noise*
25 kHz –52 dB –47 dB –50 dB
12.5 kHz –40 dB –40 dB –47 dB
Audio Distortion* 1% 2.0% 2.0%
ENVIRONMENTAL
Operating Temperature -30°C to +60°C
Storage Temperature -40°C to +85°C
Humidity Per MIL-STD
ESD IEC 801-2 KV
Water Intrusion IP54, MIL-STD
PORTABLE MILITARY STANDARDS 810C, D, E & F
MIL-STD 810C MIL-STD 810D MIL-STD 810E MIL-STD 810F
Method Proc./Cat. Method Proc./Cat. Method Proc./Cat. Method Proc./Cat.
Low Pressure 500.1 I 500.2 II 500.3 II 500.4 II
High Temperature 501.1 I, II 501.2 I/A1, II/A1 501.3 I/A1, II/A1 501.4 I/Hot, II/Hot
Low Temperature 502.1 I 502.2 I/C3, II/C1 502.3 I/C3, II/C1 502.4 I/C3, II/C1
Temperature Shock 503.1 I* 503.2 I/A1C3 503.3 I/A1C3 503.4 I
Solar Radiation 505.1 II 505.2 I 505.3 I 505.4 I
Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, III
Humidity 507.1 II 507.2 II 507.3 II 507.4 I*
Salt Fog 509.1 I* 509.2 I* 509.3 I* 509.4 I*
Blowing Dust 510.1 I 510.2 I 510.3 I 510.4 I
Vibration 514.2 VIII/F, Curve-W 514.3 I/10, II/3 514.4 I/10, II/3 514.5 I/24
Shock 516.2 I, II 516.3 I, IV 516.4 I/IV 516.5 I, IV
* Military Standards specify a single procedure for this test.
FACTORY MUTUAL APPROVALS
The PR1500 is Factory Mutual approved and Canadian Standard Association
approved as intrinsically safe for use in Classes I, II, and III, Division 1, Groups
C, D, E, F and G, as well as non-incendive use in Class I, Division 2, Groups A,
B, C and D on models ordered with the Factory Mutual option, and battery.
Accelerated Life Test
Motorola’s Accelerated Life Test (ALT) is a developmental process of rigorous
laboratory testing that simulates years of field use. Motorola has a firm
commitment to quality and reliability. These radios have been designed,
manufactured and tested to achieve high levels of component and workmanship quality. Motorola radios are designed to minimize costly repairs and
downtime.
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent
and Trademark Office. All other product or service names are the
property of their registered owners. © Motorola, Inc. 2007.
MD-PR1500SPECS
5/07
,
Loading...