Page 1
IMPRES
THE INTELLIGENT
PORTABLE RADIO
ENERGY SYSTEM
NEW!
Display impres
Multi-Charger Avaliable
impres Lite Single Charger
for Tetra MTP700/MTP750
TM
Page 2
MOTOROLA IMPRES
TM
BATTERIES & CHARGERS
Let’s talk about saving time
and money
With the impres system,
there’s no need to guess when
a battery needs to be
reconditioned. There’s no
worry about wasting unused
power or shortening battery
life by reconditioning too
often. Get the most life out of
every battery so:
• You and your crew spend
less time swapping
batteries
• You can reduce your need
to keep spares on the hand
• Each battery works longer
All of which can help you
save time and money.
What your batteries
know can help you save
time and money
This patented Motorola
technology for two-way
radio power combines a
“smart” battery, a “smart”
charger, and a system that
lets the battery, charger
and other accessory
devices communicate over
a singlewire. The battery
itself has the intelligence
to store information such
as elapsed usage time,
charge and discharge
current, voltage and
temperature. The charger
then uses the battery
information to control
battery maintenance
automatically. So the
impres system
automatically manages
battery reconditioning and
gauges fuel use to extend
battery pack life, extend
talk time and improve
performance. This
innovative, intelligent
technology helps to make
sure your two-way radios
are working when you
need them most: in highrisk public safety
applications, remote field
operations and anytime
reliable operation is
critical.
The impres system works
with nickel-cadmium,
nickel-metal hydride and
lithium-ion batteries.
The brains of the outfit
The impres system is an
advanced tri-chemistry
energy solution including
a smart battery pack, an
adaptive single- or multiunit charger provide
automatic, adaptive
reconditioning and
charging through
Motorola’s patented
hardware and software
battery management
algorithms. And all you do
is put the battery in the
charger pocket.
The impres adaptive
charger is actually three
units in one: a rapid
charger, a conditioning
charger and a
reconditioner. The
battery pack features
unique smart circuitry that
sends data to the charger.
Based on previous charge
history stored in the
battery, the charger
decides whether to charge
or to recondition the
battery, effectively
eliminating memory buildup. The charger only
reconditions the battery
when needed, maximizing
talk time and ensuring the
most possible charge
cycles for the battery pack.
And it provides a Friendly
Charge Algorithm that can
minimize heat build and
maintenance mode, to
maximum the life of the
battery pack while letting
you keep batteries on the
charger longer than ever
before.
Impres chargers can both
charge and discharge
compatible rechargeable
batteries. They can charge
lithium ion rechargeable
batteries and can
discharge and recondition
both nickel cadmium and
nickel metal hydride
rechargeable batteries.
The charger uses
information from battery
to automatically and
adaptively determine the
proper interval for nickelbased battery
reconditioning. It can also
charge conventional
compatible batteries,
providing an optimal
charge without
overheating.
When you use impres
batteries with an impres
charger, you can even
charge or recondition them
while they’re still in the
radio they power.
Compatible radios
equipped with digital
displays can display
specific battery data- and
even send to data to your
PC. The impres system is
designed to support future
accessory display and
battery management
systems, including a
custom battery pack usage
profile that will calculate
and project and end-of-life
date.
Page 3
impres MULTI-UNIT CHARGER WITH CHARGER DISPLAY
MODULES PROVIDES BATTERY ANALYZER FEATURES
The impres Multi-Unit Charger
with Charger Display Modules
has a two-line LCD screen for
each of its six charger pockets
that provides users with a host
of valuable battery information.
When a calibrated impres
battery is inserted into a pocket,
it provides the current battery
mAh and percent of rated
capacity which allows the user
to immediately know the status
of the battery without having
to charge and discharge the
battery. Additionally, the unit
displays the remaining charge
time which lets the user know
when the impres battery will
be ready for use. Additional
information displayed includes:
battery serial and part number
information, battery chemistry,
voltage and charge status
including the version of the
charger and display modules.
impres charger supports NiCd,
NiMH and Li-ion battery
chemistries, and can charge
legacy ( non-impres) batteries
as well as impres batteries for
ease in managing mixed radio
fleets. Patented impres circuitry
charges and conditions impres
batteries, reconditions them if
necessary, and keeps them fully
charged over time while
controlling damaging heat
build-up. Reconditioning can
also be manually initiated.
impres batteries can be left
attached to Motorola Two-way
radios if users prefer and will
automatically recondition. A
handy End of Life LED alert
provides notification when
impres batteries may need to
be removed from service.
Individual LCD display module
is also available to retrofit to
non-display multi-unit model
providing customisation
depending on budget and
operational needs. This allow
scalability to a full-6 LCD
displays at different
procurement cycles.
The impres™ Lite is specially designed for the Tetra
MTP700/MTP750 to provide a more affordable
alternative while still retaining most of the desired
user-friendly impres™ features. The major exception
is that it does not perform the re-conditioning function,
hence impres Smart batteries must be calibrated in
a full-featured impres charger to ensure they
accurately record, store, and display impres battery
usage data. This impres™ Lite is a single unit compact
charger consisting of a charger base and a wallmount transformer that tracks “usage” information
with the battery such as battery unique ID, number
of charge cycles, end of service life, time to recondition and alert to the user via LED indicators.
Record of date of
manufacture
Unique battery serial number
Periodic battery fuel tank
recalibration
Record of battery charge
cycles: “smart”,
approximated, and
reconditioned
Record of initial and present
“fuel tank” size
Battery end-of-service-life
indicator
Log battery data to a
personal computer via a
serial interface.
impres: The Intelligent
Motorola Portable Radio Energy
System Features:
•24 month warranty for
NiCD battery when used
with an impres adaptive charger.
•Charger/Conditioner/
Reconditioner – three chargers
in one.
• Automatic Adaptive
Reconditioning – reconditions
only when necessary based on
the customer usage pattern.
•Advanced charging /trickle/
maintenance modes – advanced
algorithms keeps batteries cooler
during charging… trickle charge
is low current and maintenance
mode is zero current with top off
bursts keeping the battery fully
charged at all times.
•Tri-Chemistry Charging – supports
NiCd, NiMH, and Li-ion battery
chemistries.
•Universal Charging – supports
multiple two-way radio models
in one charger
•“Safe” Battery Stand – batteries
can be safely left on the charger
for extended periods of time
without damage from overheating
while keeping the batteries fully
charged.
•Revert to Rapid Charging – keeps
battery fully charged at all times.
•Charge Resume – resumes rapid
charge on batteries briefly
removed from the charger.
•Dual LED Alert – Full Charge /
End of Service Life – alerts users
when a battery is fully charged,
but may be near its end of life.
This ensures that good batteries
are being used in the field.
• Motorola Battery ID Recognition
– Smart batteries contain unique
IDs and store a multitude of
information about the battery,
its usage, and its charge
characteristics.
• Charges batteries while on or
off the radio.
• Smart batteries and chargers
operate with older as well as
newer Motorola radio platforms.
Page 4
impresTM BATTERIES Portfolio
BATTERY MODEL DESCRIPTION NON-SMART EQUIVALENT RADIO COMPATIBILITY
HNN9028 impres NiCD 1500mAh 7.5V NTN7144 HT1000/MTS2000/MTX838/MTX8000
HNN9029 impres NiCD 1500mAh 7.5V FM Approved NTN7341 HT1000/MTS2000/MTX838/MTX8000
HNN9031 impres NiCD 1525mAh 7.5V NTN8294 XTS3000/XTS3500/XTS5000
HNN9032 impres NiCD 1525mAh 7.5V FM Approved NTN8295 XTS3000/XTS3500/XTS5000
NNTN4435 impres NiMH 1800 mAh 7.5V NTN8923 XTS3000/XTS3500/XTS5000
NNTN4436 impres NiMH 1725 mAh 7.5V FM Approved NTN8299 XTS3000/XTS3500/XTS5000
NNTN4437 impres NiMH 1725 mAh 7.5V FM App Ruggeddized XTS3000/XTS3500/XTS5000
HNN9033 impres NiCD 1800mAh 7.5V NTN4595 Saber/ASTRO Saber
HNN9034 impres NiCD 1800mAh 7.5V FM Approved NTN4596 Saber/ASTRO Saber
PMNN4047 impres Lilon 1500mAh 7.2V Tetra MTP700/MTP750
PMNN4048 impres NiMH 1200mAh 7.2V Tetra MTP700/MTP750
PMNN4049 impres NiMH 1200mAh 7.2V FM Approved Tetra MTP700/MTP750
impresTM CHARGERS Portfolio
CHARGER MODEL DESCRIPTION NON-SMART EQUIVALENT RADIO COMPATIBILITY
Single Unit - impres Lite
AZWPLN4149 110V US Plug PMTN4063 Tetra MTP700/MTP750
AZWPLN4150 230V EU Plug PMTN4064 Tetra MTP700/MTP750
AZWPLN4151 240V UK Plug PMTN4065 Tetra MTP700/MTP750
Single Unit - impres
WPLN4117 110-230V US Cord NTN1168 MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
WPLN4112 110-230V EU Cord NTN1169 MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
WPLN4113 110-230V UK Cord NTN1170 MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
WPLN4115* 110-230V AUST Cord – MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
Multi-Unit - Non Display impres
WPLN4120 110-230V US Cord NTN1177 MTP700/MTP750/HT1000/MTS2000
NTN4796 XTS3000/3500/Saber/ASTRO Saber
WPLN4109 110-230V EU Cord NTN1178 MTP700/MTP750/HT1000/MTS2000
NTN4797 XTS3000/3500/Saber/ASTRO Saber
WPLN4110 110-230V UK Cord – MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
WPLN4118** 110-230V AUST Cord NTN1178 HT1000/MTS2000
NTN4797 XTS3000/3500/Saber/ASTRO
Multi-Unit - Display impres
WPLN4135 110-230V US Cord – MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
WPLN4131 110-230V EU Cord – MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
WPLN4132 110-230V UK Cord – MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO Saber
WPLN4133** 110-230V AUST Cord – HT1000/MTS2000
XTS3000/3500/Saber/ASTRO
WPLN4136 110-230V KOREA Cord – MTP700/MTP750/HT1000/MTS2000
XTS3000/3500/Saber/ASTRO
RLN5382 Display Module Only – Retrofit to Multi-Unit Non-Display models
OPTIONAL ACCESSORIES/REPLACEMENT KITS (MULTI-UNIT)
NLN7967 Wall mount bracket
RLN4325 Main board replacement kit
RLN5330 Top housing replacement kit
6880309L66A Service Manual
All specifications are subject to change without notice.
*Package excludes MTP700 battery insert (RLN5211).
**Package excludes MTP700 battery inserts - 6 per (RLN5212).
Input Voltage 13Vdc 100 to 220Vac ±10%, 50/60Hz 100 to 220Vac ±10%, 50/60Hz
Size (L x W x H) ø114mm x 51mm 200mm x 90 mm x 83 mm 200mm x 90 mm x 83 mm
Weight (gm) 640 626 4177
DC Current to battery 1.25A ±15% 1.5A ±15% 1.25A ±15% per slot
Operating Temperature 0 – 50˚C0 – 50˚C0 – 50˚C
IMPRES CHARGER SPECIFICATION
impres Lite Single Unit Multi-Unit
Visit us at www.motorola.com/cgiss/AP
Motorola and the Stylized M Logo are trademarks of Motorola, Inc. All other product or
service names are property of their respective owners. ©2003, Motorola. All Rights Reserved.
IMPRES is a trademards of Motorola.
AF4-06-002 Rev.3
Loading...