Page 1
HS815
Bluetooth®
Handsfree Headset
Get Connected in
4 Quick Steps
1 - CHARGE
2 - START
BLUETOOTH
3 - PAIR
4 - TEST AND
USE
For help, contact us at 1- 877-MOTOBLU
BEFORE YOU
BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
HS815 Headset.
Earhook
Charging
Charging
Port
Port
Speaker
Speaker
(on reverse
(on reverse
side)
side)
Call Button
Call Button
Indicator Light
LED Indicator
Microphone
Microphone
Volume Buttons
Volume Buttons
Earhook
1
Your Headset's Battery
Plug the Motorola charger into the end of
1
the headset with the release tab facing
down.
The indicator light turns on when the battery
is charging. It may take up to 1 minute for
the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns off.
CHARGE
Release Tab Down
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, turn on the Bluetooth
feature in your phone.
For most Motorola phones:
Select (
1
Bluetooth Link > Setup.
Scroll to Power.
2
3
Select Change.
Scroll to On.
4
Press Select to turn on the Bluetooth
5
feature. The Bluetooth feature remains on
until you turn it off.
M
Menu) > Settings > Connection >
Disconnect the charger.
2
Note: Headset is not functional while charging.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
Page 2
3
or visit us at www.hellomoto.com
PAIR
Your Headset
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Before you can use your headset, you must pair
(link) it with your phone.
Step A - PUT THE HEADSET IN PAIRING
MODE
Indicator Light
Ensure the headset is turned off (indicator
1
light not blinking).
2
Press and hold the Call E button for 4 or 5
seconds. The indicator light will initially flash,
but continue to hold down the button until
the indicator light is steadily lit.
If the indicator light is flashing or not steadily
lit when releasing the button, repeat both
steps 1 and 2 on this page.
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Guide Number: 6809495A04-O
When you see this symbol on a Motorola product, do
not dispose the product with household waste.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office.The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.
PAIR
CONTINUED
3
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
On your Motorola phone, press (
1
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola HS815.
2
Select OK or Yes to pair your headset with
3
your phone.
Enter the passkey: 0000
4
Select OK.
5
When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
M
Menu) >
4
TEST AND USE
Your phone and headset are now paired
and ready to make and receive calls.
To make a call:
1
Place the headset over your ear.
On your phone, dial the number you want
2
to call and press the SEND key.
If your phone and headset are successfully
3
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time.
Page 3
USING YOUR HS815
TROUBLESHOOTING
See
Features and
Functions Guide
on the reverse side
for information on
using your HS815.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on and steady when your phone is searching
for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1- 877-MOTOBLU.
FOR DETAILS ABOUT YOUR HANDSFREE
DEVICE
See the user’s guide or visit us at
www.hellomoto.com/bluetooth and click
Support.
Features and
Functions Guide
HS815
Bluetooth®
Handsfree Headset
IMPORTANT:
IMPORTANT:
Be sure to first follow the
Be sure to first follow the
instructions
instructions
on the reverse side to
on the reverse side to
TURNING ON
AND OFF
To turn on the headset, press and hold the
Call E button on your headset until the
indicator light begins flashing. The indicator
light blinks when the power is on.
To turn off the headset, press and hold the
Call E button on your headset for 5
seconds. The indicator light will flash rapidly
and then stop flashing.
Call Button
complete initial setup of
complete initial setup of
your HS815
your HS815
Indicator Light
Page 4
WEARING
CHANGING FOR USE
THE HEADSET
Open the earhook.
1
Loop the earhook over your ear.
2
Press the headset to your ear.
3
4
Point the microphone toward your mouth.
ON OTHER EAR
You can wear your HS815 headset on your
left or right ear.
To change ear orientation, simply flip the
earhook all the way over.
ADJUSTING VOLUME
To adjust the volume on your headset, press
the Volume Up or Volume Down button
until you reach the desired volume level.
Volume Buttons
When increasing (or decreasing) speaker
volume, a single audio tone is heard when
reaching maximum (or minimum) level.
Page 5
MAKING CALLS
MAKING CALLS
CONTINUED
Function Action
Make a voice dial call Tap the Call E
button and speak
the name after the
tone
End a call Tap the Call E
button
Redial a number Press and hold the
Call E button until
you hear a beep
Receive a call Tap the Call E
button
Reject a call Press and hold the
Call E button until
you hear a beep
Note: Your HS815 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's
guide for more information.
Function Action
Answer a second Press and hold the
incoming call Call E button (places
first call on hold)
Toggle between two Press and hold
active calls the Call E button
(places other call on
hold)
Put an active call on Press and hold the
hold or resume a call Call E button until
you hear a beep
Transfer a call from the Tap the Call E
phone to the headset button
Note: If the link between the headset and phone
abnormally disconnects (for example, out of range), the
headset tries to reestablish the link.
INDICATOR LIGHTS
The indicator light provides information about
your headset status.
With the Charger Plugged In
Indicator Light Headset Status
On (steady) Charging
Off Charging complete
With No Charger Plugged In
Indicator Light Headset Status
Off Power off
On (steady) Pairing mode
10 rapid flashes Pairing successful
Slow pulse Connected
(on a call)
Quick flash Standby
(not on call)
Note: After 5 minutes of inactivity, the indicator light stops
flashing to conserve power, but the headset remains in
standby mode.
AUDIO TONES
The audio tones provide information about your
headset status.
Audio Tone Headset Status
Single high tone when Volume minimum
pressing Volume button or maximum
reached
Five rapid high tones Low battery
repeated every 60 sec.
No audio indications; Out of range
deteriorating audio
quality
Ring tone Incoming call
Single high tone Pairing confirmation
or End call
Single low tone Voice activation
Dual high/low tone Voice tag not
recognized
Low to high tone Phone network
not available
Loading...