Motorola MOTOROKR S305 User Manual
MOTOROKR
Getting Started Guide
S305
welcome
The MOTO
satisfying listening experience in a sleek design. Perfect
for streaming music from your music phone, MP3 player,
or computer.
Caution:
time, please read the important legal and safety booklet
provided with your headphones.
2
ROKR
™ S305 Wireless Headphones deliver a
• Goodbye wires
control of your music and calls using intuitive
push buttons on your headphones.
• Chill out in comfort
comfortable behind-the-neck style makes it your
ideal partner for total music immersion.
•Stay connected
the built-in microphone.
Before using your headphones for the first
—Move freely with wireless
—Your headphone’s
—Communicate hands- free with
your headphones
your headphones
Volume Buttons ( )
Tr ack Back
Button (Ô)
Power Button/
Indicator Light (Í)
Charging Port
9 Ï
Call Button (
Play/Pause/Mute Button (\)
)
Tr ack Forward
Button (Õ)
Microphone
3
charge it
charge it
You’ll need to charge your headphone’s battery before
using it. Plug the charger into the charging port on your
headphones (as shown below) and a wall outlet.
The indicator light is red while the battery is charging.
When the battery is fully charged, the indicator light
turns green.
Note:
Your battery is designed to last the life of your
headphones. It should only be removed by a recycling
facility. Any attempt to remove or replace your battery
will damage your headphones.
4
connect wirelessly
connect wireles sly
pair & connect
Once charged, get your headphones paired and
connected to your Bluetooth phone and/or music player.
1
Turn off any Bluetooth devices previously paired
(linked) with your headphones.
2
Turn on the Bluetooth feature on your phone or
music player.
3
Turn on your headphones by pressing and holding
Ö
button until the indicator light turns green.
the
The indicator light flashes in red and green to
indicate the headphones are in discoverable mode.
4
Set your phone or music player to search for
Bluetooth devices.
5
Select
Motorola S305
your phone or music player.
6
Select OK or
phone or music player.
7
If prompted, enter
from the search results on
Ye s
to pair your headphones with your
0000
for the passkey.
5
connect wirelessly
The indicator light rapidly flashes green every 3 seconds
when complete. For connect status:
Number
of Flashes Indicates
1 connected for calls and music
2 connected for music only
3 connected for calls only
4 not connected—repeat pair & connect
steps on page 5
reconnect
After initially pairing and connecting your phone and/or
music player and headphones, you don’t need to do
it again.
For daily use, make sure your headphones are turned
ON, and your phone and/or music player’s Bluetooth
feature is ON. Your headphones and phone/music player
will connect automatically!
6
connect wirelessly
test your connections
To confirm connection to your phone and/or music player:
make handsfree calls
1
Place the headphones over your ears (see “wear
your headphones” on page 8 for help).
2
Dial the number you want to call and press
key on your phone.
SEND
If your phone and headphones are successfully
connected, you hear ringing on your headphones.
play music
1
Place the headphones over your ears (see “wear
your headphones” on page 8 for help).
2
Play music on your phone or music player.
If your music source and headphones are successfully
connected, you hear music on your headphones.
CALL/
7
wear your headphones
wear your headphones
Use both hands to gently rotate the headphones over
your head, then place the earhooks and speakers over
your ears for a snug fit as shown.
Once in place, the back of your headphones “float” over
your neck.
8
wear your headphones
If your headphones become flattened or bent (such as
when stored in a backpack), twist the speakers in the
direction as shown to restore to original shape.
9
turn it on & off
turn it on & off
Press and hold the Ö button until the indicator light turns
green and you hear a tone sequence.
Note:
Your headphones will not turn on while charging.
Note:
If your headphones are idle for 5 minutes, they
automatically turn off to conserve battery charge.
10
control your tunes
Press Å—play/pause music
Press and hold Å—stop music
Press ×previous track
Press and hold ×rewind
Press Ä—next track
Press and hold Ä—fast-forward
control your tune s
Playback controls on your headphones can be used when
listening to music from a Bluetooth-enabled music player
that also provides remote control capabilities (AVRCP).
If remote music control is not supported by your music
player, music should be controlled from your music
player.
Note:
With some music players, previous track must be
pressed twice to go back to the previous song. Refer to
your music player’s manual for specific control features.
11
crank it up
Press Ï
—decrease volume
Press 9 —increase volume
crank it up
Press 9 and Ï to adjust volume on your headphones.
You’ll hear a tone when pressing 9
and Ï, and two tones
when reaching maximum or minimum volume on your
headphones.
Note:
The volume setting on your music player may also
affect volume on your headphones.
12
calls
calls
call control
Use these controls and indicator on your headphones
when making and receiving handsfree calls.
Volume Buttons
Reject
Button
(Ã)
Indicator
Light
(
Ï)
Mute Button (Å)
(9)
Call Button
Notes:
•
Some features are phone/network dependent.
•
Your headphones support Handsfree and
Headset profiles. Accessing call functions
depends upon which profile your phone
supports. See your phone’s user’s guide for more
information.
( )
Reject
Button
(Ä)
13
calls
Press
—answer call
Press (Ã or Ä)
—reject call
receive calls
When you receive a call, the indicator light flashes green
rapidly on your headphones, and you hear a ringtone over
your headphones. If music is playing, the music pauses
or mutes, depending on your music player and
connection setup.
14
calls
Press
—end call
Press Å
—mute/unmute call
(reminder tone is heard during mute)
on a call
When a call is active, the indicator light flashes green
continuously on your headphones.
15
Loading...