Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz, MC9090-K, MC9090-S, MC9090-G, MC9094-K User Manual

...

Download

MC909X Mobile Computer

User Guide

MC909X User Guide

72E-72215-04

Rev A

March 2007

permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording , or information storage and retrieval systems. The material in this manual is subject to change without notice.

The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written per mission from Motoro la. The user agree s to maintain Motorola’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.

Motorola reserves the right to make changes to any software or product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any

product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc., intellectual

property rights. An implied license only exists for equipment, circuits, and subsystems contained in Motorola products. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Symbol is a registered

trademark of Symbol Technologies, Inc. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademark s of Microsof t Corporation. All other prod uct or service names are the property of their respective owne r s .

Motorola, Inc. One Symbol Plaza Holtsville, New York 11742-1300

http://www.motorola.com

Patents

This product is covered by one or more of the patents listed on the website: www.symbol.com/patents

Revision History

Changes to the original manual are listed below:

Change Date Description

Rev A 11/1/05 Initial release.

-02 Rev A 1/19/06 Add MC9090-K/S, MC9090-G and MC9094-K/S with Windows Mobile 5.0.

-03 Rev A 3/21/06 Add MC9097 support.

-04 Rev A 3/6/07 Add generic MC9097 information, 33-key keypad, Fusion 2.5 and AKU 3.2 update information.

Chapter 1

Patents........................................................................................................................... ii

Revision History............................................................................................................. iii

About This Guide

Introduction.................................................................................................................... v

Documentation Set .................................................................................................. v

Configurations................................................................................................................ vi

Software Versions.................................................................................................... vi

Chapter Descriptions ..................................................................................................... ix

Notational Conventions.................................................................................................. x

Related Documents and Software................................................................................. x

Service Information........................................................................................................ xi

Chapter 1: Getting Started

Introduction ................................................................................................................... 1-1

Unpacking the Mobile Computer ................................................................................... 1-4

Accessories ................................................................................................................... 1-4

Getting Started .............................................................................................................. 1-5

Installing and Removing the Main Battery .................................................................... 1-6

Installing the Main Battery ....................................................................................... 1-6

Charging the Battery ..................................................................................................... 1-6

Charging the Main Battery and Memory Backup Battery ........................................ 1-6

Charging Spare Batteries ........................................................................................ 1-8

Removing the Main Battery ..................................................................................... 1-8

Starting the Mobile Computer ....................................................................................... 1-9

Calibrating the Screen .................................................................................................. 1-10

Checking Battery Status ............................................................................................... 1-10

SIM Card ....................................................................................................................... 1-11

Stylus ............................................................................................................................ 1-13

MC9090-G Strap ........................................................................................................... 1-14

MC909X-K Strap ........................................................................................................... 1-15

MC909X-S Strap ........................................................................................................... 1-17

Battery Management ..................................................................................................... 1-18

Battery Saving Tips ................................................................................................. 1-18

Table of Contents

vi MC909X User Guide

Changing the Power Settings ....................................................................................... 1-18

Changing the Display Backlight Settings ...................................................................... 1-18

Changing the Keypad Backlight Settings ...................................................................... 1-19

Turning Off the Radios .................................................................................................. 1-19

On Devices with Mobile 5.0 AKU 1.0 ...................................................................... 1-19

Turning Off the WLAN Radio ............................................................................ 1-19

Bluetooth and WWAN Radios ........................................................................... 1-19

On Devices with Mobile 5.0 AKU 2.2 and higher .................................................... 1-20

On Device with CE 5.0 (OEM Version 01.15 and lower) ........................................ 1-21

WLAN Radio ..................................................................................................... 1-21

Bluetooth Radio ................................................................................................ 1-21

On Device with CE 5.0 (OEM Version 01.16 and higher) ....................................... 1-22

WLAN Radio ..................................................................................................... 1-22

Bluetooth Radio ................................................................................................ 1-22

Chapter 2: Operating the MC909X

Introduction ................................................................................................................... 2-1

Status Icons (Windows CE 5.0) .................................................................................... 2-1

Status Icons (Windows Mobile 5.0) .............................................................................. 2-3

Status Bar ............................................................................................................... 2-3

Command Bar ......................................................................................................... 2-4

Speaker Icon ........................................................................................................... 2-5

Battery Icon ............................................................................................................. 2-6

Connectivity Icon ..................................................................................................... 2-6

Time Icon ................................................................................................................ 2-7

Instant Message Icon .............................................................................................. 2-7

E-Mail Icon .............................................................................................................. 2-8

Multiple Notification Icon ......................................................................................... 2-8

Locking the Mobile Computer (Windows Mobile 5.0 Only) ........................................... 2-8

LED Indicators .............................................................................................................. 2-9

Keypads ........................................................................................................................ 2-10

28-Key Keypad for MC909X-G/K............................................................................. 2-11

28-Key Keypad for MC909X-S................................................................................. 2-12

33-Key Numeric/Function Keypad for MC909X-K................................................... 2-16

38-Key Numeric/Function Keypad for MC909X-S................................................... 2-20

38-Key Alpha/Shifted Numeric Keypad for MC909X-S............................................ 2-24

43-Key Keypad for MC909X-G/K............................................................................. 2-27

53-Key Keypad for MC909X-G/K............................................................................. 2-31

3270 Emulator Keypad for MC909X-G/K................................................................. 2-35

5250 Emulator Keypad for MC909X-G/K................................................................. 2-39

VT Emulator Keypad................................................................................................ 2-43

Keypad Special Functions ....................................................................................... 2-47

Entering Data ................................................................................................................ 2-48

Using the Power Button ................................................................................................ 2-48

Using a Wired Headset ................................................................................................. 2-49

Using a Bluetooth Headset ........................................................................................... 2-50

Data Capture ................................................................................................................ 2-50

Laser Scanning ....................................................................................................... 2-50

Table of Contents vii

Imaging ................................................................................................................... 2-50

Scanning Considerations ........................................................................................ 2-51

Scanning Bar Codes ............................................................................................... 2-52

Scan LED Indicator ................................................................................................. 2-53

Resetting the Mobile Computer .................................................................................... 2-53

Windows CE 5.0 Devices ........................................................................................ 2-53

Performing a Warm Boot ................................................................................... 2-54

Performing a Cold Boot ..................................................................................... 2-54

Windows Mobile 5.0 Devices .................................................................................. 2-54

Performing a Warm Boot ................................................................................... 2-54

Performing a Cold Boot ..................................................................................... 2-54

Waking the Mobile Computer .................................................................................. 2-55

Chapter 3: Using Bluetooth

Introduction ................................................................................................................... 3-1

Adaptive Frequency Hopping ........................................................................................ 3-1

Security ......................................................................................................................... 3-2

Turning the Bluetooth Radio Mode On and Off ............................................................. 3-2

Disabling Bluetooth ................................................................................................. 3-2

Enabling Bluetooth .................................................................................................. 3-3

Bluetooth Power States .......................................................................................... 3-3

Cold Boot .......................................................................................................... 3-3

Warm Boot ........................................................................................................ 3-3

Suspend ............................................................................................................ 3-4

Resume ............................................................................................................. 3-4

Bluetooth Profiles .......................................................................................................... 3-4

Modes ........................................................................................................................... 3-5

Wizard Mode ........................................................................................................... 3-5

Explorer Mode ......................................................................................................... 3-7

Discovering Bluetooth Device(s) ................................................................................... 3-8

Bonding with Discovered Device(s) .................................................................. 3-10

Renaming a Bonded Device ............................................................................. 3-11

Deleting a Bonded Device ................................................................................. 3-12

Accepting a Bond .............................................................................................. 3-12

Discovering Services .................................................................................................... 3-13

File Transfer Services ............................................................................................. 3-14

Create New File or Folder ................................................................................. 3-15

Delete File ......................................................................................................... 3-15

Get File .............................................................................................................. 3-15

Put File .............................................................................................................. 3-16

Connect to Internet Using Access Point ................................................................. 3-16

Dial-Up Networking Services .................................................................................. 3-16

Add a Dial-up Entry ........................................................................................... 3-18

OBEX Object Push Services ................................................................................... 3-19

Send a Picture ................................................................................................... 3-19

Headset Services .................................................................................................... 3-21

Serial Port Services ................................................................................................ 3-21

Personal Area Network Services ............................................................................ 3-22

viii MC909X User Guide

Bluetooth Settings ......................................................................................................... 3-22

Device Info Tab ....................................................................................................... 3-22

Services Tab .......................................................................................................... 3-23

Dial-Up Networking Service .............................................................................. 3-24

File Transfer Service ......................................................................................... 3-25

OBEX Object Push Service .............................................................................. 3-25

Personal Area Networking Service ................................................................... 3-26

Serial Port Service ............................................................................................ 3-26

Headset Service ................................................................................................ 3-27

Security Tab ............................................................................................................ 3-28

Discovery Tab ......................................................................................................... 3-28

Virtual COM Port Tab .............................................................................................. 3-29

Miscellaneous Tab .................................................................................................. 3-30

Chapter 4: Using MC9094 Phone

Introduction ................................................................................................................... 4-1

Accessing the Phone Keypad ....................................................................................... 4-1

Making a Call Using the Keypad ............................................................................. 4-2

Answering a Call ........................................................................................................... 4-2

Audio Modes ........................................................................................................... 4-3

Incoming Call Features ........................................................................................... 4-3

Muting a Call ................................................................................................................. 4-4

Taking Notes ................................................................................................................. 4-4

Using Speed Dial .......................................................................................................... 4-5

Adding a Speed Dial Entry ...................................................................................... 4-5

Editing a Speed Dial Entry ...................................................................................... 4-8

Deleting a Speed Dial Entry .................................................................................... 4-9

Making a Speed Dial Call ........................................................................................ 4-10

Using Call History ......................................................................................................... 4-10

Managing Call History ............................................................................................. 4-11

Changing the Call History View ........................................................................ 4-11

Resetting the Recent Calls Counter .................................................................. 4-12

Deleting Call History Items by Call Date ........................................................... 4-12

Deleting All Call History Items ........................................................................... 4-13

Viewing Call Status ........................................................................................... 4-14

Using the Call History Menu ............................................................................. 4-14

Using Contacts ............................................................................................................. 4-15

Swapping Calls ............................................................................................................. 4-16

Conference Calling ....................................................................................................... 4-16

Text Messaging ............................................................................................................ 4-18

Sending a Message ................................................................................................ 4-18

Establishing a Data Connection .................................................................................... 4-19

Ending an GPRS Data Connection ......................................................................... 4-20

Chapter 5: Using the MC9097 Phone

Introduction ................................................................................................................... 5-1

Getting Started .............................................................................................................. 5-1

Table of Contents ix

Activating Service ................................................................................................... 5-1

Phone Properties Page ........................................................................................... 5-1

Finding Your Phone Number and Walkie-Talkie Number ....................................... 5-1

Accessing the Phone Keypad ....................................................................................... 5-3

Turning the Phone On and Off ...................................................................................... 5-3

With AKU 1.1 (Flight Mode) .................................................................................... 5-3

With AKU 2.2 and Higher ........................................................................................ 5-5

Using the Speakerphone and a Headset ...................................................................... 5-6

Adjusting Audio Volume .......................................................................................... 5-6

Making a Phone Call ..................................................................................................... 5-7

Using the Phone Keypad ........................................................................................ 5-7

Making Calls from Contacts .................................................................................... 5-7

Making Calls from Recent Call List ......................................................................... 5-8

Receiving Phone Calls .................................................................................................. 5-9

Walkie-Talkie Calls ....................................................................................................... 5-10

Optimum Walkie-Talkie Usage ............................................................................... 5-10

Sending Call Alerts ................................................................................................. 5-11

Making Walkie-Talkie Calls ..................................................................................... 5-12

Making Walkie-Talkie Calls from Contacts ............................................................. 5-12

Receiving Call Alerts ............................................................................................... 5-13

Receiving Walkie-Talkie Calls ................................................................................. 5-14

Establishing a Data Packet Connection ........................................................................ 5-15

Phone Options .............................................................................................................. 5-16

Creating Notes ........................................................................................................ 5-16

Muting a Call ........................................................................................................... 5-18

Putting Calls on Hold .............................................................................................. 5-18

Using Speed Dial .................................................................................................... 5-18

Add a Speed Dial Entry ..................................................................................... 5-19

Create a New Speed Dial Entry ........................................................................ 5-20

Edit a Speed Dial Entry ..................................................................................... 5-20

Delete a Speed Dial Entry ................................................................................. 5-21

Viewing Missed Calls .............................................................................................. 5-21

Viewing Call History ................................................................................................ 5-22

View Call History by Call Type .......................................................................... 5-22

Viewing Call Status ........................................................................................... 5-23

Deleting Calls .................................................................................................... 5-23

Deleting Calls Based on Length of Time ........................................................... 5-24

Deleting individual Calls .................................................................................... 5-25

Using Call Timers .............................................................................................. 5-25

Chapter 6: Accessories

Introduction ................................................................................................................... 6-1

Keypads .................................................................................................................. 6-1

Cradles .................................................................................................................... 6-1

Snap-on Modules .................................................................................................... 6-1

Keypads ........................................................................................................................ 6-2

Replacing the Keypad ............................................................................................. 6-2

Multi Media Card (MMC) / Secure Device (SD) Card ................................................... 6-3

x MC909X User Guide

Single Slot Serial/USB Cradle ...................................................................................... 6-5

Battery Charging Indicators .................................................................................... 6-6

Four Slot Ethernet Cradle ............................................................................................. 6-7

Battery Charging Indicators .................................................................................... 6-8

Four Slot Charge Only Cradle ...................................................................................... 6-9

Battery Charging Indicators .................................................................................... 6-9

Four Slot Spare Battery Charger .................................................................................. 6-10

Spare Battery Charging with the Four Slot Spare Battery Charger ........................ 6-10

Battery Charging Indicators .................................................................................... 6-10

Magnetic Stripe Reader ................................................................................................ 6-11

Attaching and Removing ......................................................................................... 6-12

Setup ....................................................................................................................... 6-13

Battery Charging Indicators .................................................................................... 6-13

Serial/USB Connection ........................................................................................... 6-14

Using the MSR ........................................................................................................ 6-14

Cable Adapter Module .................................................................................................. 6-15

Attaching and Removing ......................................................................................... 6-16

Setup ....................................................................................................................... 6-16

Battery Charging Indicators .................................................................................... 6-17

Serial/USB Connection ........................................................................................... 6-17

Universal Battery Charger (UBC) Adapter .................................................................... 6-18

Inserting and Removing a Battery ........................................................................... 6-18

Battery Charging Indicators .................................................................................... 6-18

Modem Module ............................................................................................................. 6-19

Setup ....................................................................................................................... 6-20

Connecting to the Mobile Computer ................................................................. 6-20

Connecting to the Single Slot Serial/USB Cradle ............................................. 6-21

Chapter 7: Maintenance & Troubleshooting

Introduction ................................................................................................................... 7-1

Maintaining the Mobile Computer ................................................................................. 7-1

Troubleshooting ............................................................................................................ 7-2

Mobile Computer ..................................................................................................... 7-2

Bluetooth Connection .............................................................................................. 7-5

Four Slot Charge Only Cradle ................................................................................. 7-6

Four Slot Ethernet Cradle ....................................................................................... 7-7

Single Slot Serial/USB Cradle ................................................................................. 7-10

Cable Adapter Module ............................................................................................ 7-11

Magnetic Stripe Reader .......................................................................................... 7-11

Modem Module ....................................................................................................... 7-13

Appendix A: Specifications

Technical Specifications ............................................................................................... A-1

Mobile Computer ..................................................................................................... A-1

Modem Module ....................................................................................................... A-6

Mobile Computer Pin-Outs ........................................................................................... A-7

Accessory CAM and MSR Pin-Outs ............................................................................. A-8

Table of Contents xi

Appendix B: Keypad Special Keys

Introduction ................................................................................................................... B-1

Keypads ........................................................................................................................ B-1

Appendix C: Regulatory

Introduction ................................................................................................................... C-1

Accessory Power Supply Regulatory Compliance ........................................................ C-1

xii MC909X User Guide

About This Guide

Introduction

This guide provides information about us ing the MC 9090 family of mobile computers and accessories.

NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.

Documentation Set

The documentation set for the MC909X is divided into guides that provide information for specific user needs.

•

Microsoft Application Guide - describes how to use Microsoft developed applications.

•

Symbol Application Guide - describes how to use Symbol developed applications.

About This Guide

•

MC909X User Guide - describes how to use the MC909X mobile computer.

•

MC909X Integrator Guide - describes how to set up the MC90 9X mobile co mputer and th e accesso ries.

•

SMDK Help File - provides API information for writing applications.

vi MC909X User Guide

Configurations

This guide covers the following configurations:

Configuration Radios Display Memory

MC9090-G WLAN: 802.11a/b/g

WPAN: Bluetooth

MC9090-G WLAN: 802.11a/b/g

WPAN: Bluetooth

MC9090-K WLAN: 802.11a/b/g

WPAN: Bluetooth

MC9090-S WLAN: 802.11a/b/g

WPAN: Bluetooth

MC9094-K WLAN 802.11a/b/g

WPAN: Bluetooth WWAN:EDGE/ GPRS

MC9094-S WLAN 802.11a/b/g

WPAN: Bluetooth WWAN:EDGE/ GPRS

Color or monochrome

Color 64 MB RAM

64 MB RAM or 128 MB RAM/ 64 MB Flash

or 128 MB RAM/ 128 MB Flash

Data

Capture

Laser, Long Range Laser, or Imager

Laser or Imager

Operating

System

Windows CE 5.0

Windows Mobile 5.0 Premium Edition

Windows Mobile 5.0 Phone Edition

Keypads

28-key, 43-key, 53-key, VT, 3270, 5250 Emulators

28-key, 33-key, 43-key, 53-key

28-key; 38-key alpha; 38-key numeric

28-key, 33-key, 43-key, 53-key

28-key; 38-key alpha; 38-key numeric

MC9097-K WLAN 802.11a/b/g

WPAN: Bluetooth WWAN: iDEN

MC9097-S WLAN 802.11a/b/g

WPAN: Bluetooth WWAN: iDEN

Color 64 MB RAM

or 128 MB RAM/ 128 MB Flash

Color 64 MB RAM

or 128 MB RAM/ 128 MB Flash

Laser or Imager

Windows Mobile 5.0 Phone Edition

28-key, 33-key, 43-key, 53-key

28-key; 38-key alpha; 38-key numeric

Software Versions

This guide covers various software configurations and references are made to operating system or software

versions for:

•

Adaptation Kit Update (AKU) version

•

OEM version

•

Phone version

•

BTExplorer version

•

Fusion version

•

Phone version.

About This Guide vii

AKU Version for Mobile 5.0 Devices

To determine the Adaptation Kit Update (AKU) version on a Mobile 5.0 device: Tap

Start > Settings > System tab > About icon > Version tab.

The second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 14929.2.2.1 indicates that the device is running AKU version

2.2.1.

OEM Version on Mobile 5.0 Devices

To determine the OEM software version on a Mobile 5.0 device: Tap

Start > Settings > System tab > System Information icon > System ta b.

OEM Software on Windows CE 5.0 Devices

To determine the OEM software version on a CE 5.0 device: Tap

Start > Settings > Control Panel > System Information icon > System tab.

viii MC909X User Guide

BTExplorer Software

To determine the BTExplorer software version on a Mobile 5.0 or Windows CE 5.0 device:

Tap

BTExplorer icon > Show BTExplorer> File > About.

Fusion Software

To determine the Fusion software version on a Mobile 5.0 or Windows CE 5.0 device:

Wireless Strength icon > Wireless Status > Versions.

Tap

Phone Software

To determine the Phone software version on a Mobile 5.0 device: Tap

Start > Phone > Menu > Options > Version Information tab.

About This Guide ix

MC9094

Chapter Descriptions

Topics covered in this guide are as follows:

•

Chapter 1, Getting Started, provides information on getting the mobile computer up and ru nn in g for the

first time.

•

Chapter 2, Operating the MC909X, explains how to use the mobile computer. This includes instructions

for powering on and resetting the mobile computer, entering and capturing data.

•

Chapter 3, Using Bluetooth, explains how to perform Bluetooth functionality on the mobile computer.

•

Chapter 4, Using MC9094 Phone, explains how to use the MC9094 phone functionality on the mobile

computer.

•

Chapter 5, Using the MC9097 Phone, ex plains how to use the MC9097 phone functionality on the mobile

computer.

•

Chapter 6, Accessories, describes the accessories available for the mobile computer and how to use the

accessories with the mobile computer.

•

Chapter 7, Maintenance & Troubleshooting, includes instructions on cleaning and storing the mobile

computer, and provides troubleshooting solutions for potential problems during mobile computer operation.

MC9097

•

Appendix A, Specifications, includes a table listing the technical specifications for the mobile computer.

•

Appendix B, Keypad Special Keys, contains the keypad functions/special characters for the

keypads.includes a table listing the technical specifications for the mobile computer.

•

Appendix C, Regulatory, contains the accessory power supply regulatory compliance statements.

x MC909X User Guide

Notational Conventions

The following conventions are used in this document:

•

“Mobile computer” refers to the Symbol MC909X series of hand-held computers.

•

Italics are used to highlight the following:

- Chapters and sections in this guide

- Related documents

•

Bold text is used to highlight the following:

- Dialog box, window and screen names

- Drop-down list and list box names

- Check box and radio button names

- Icons on a screen

- Key names on a keypad

- Button names on a screen.

•

Bullets (•) indicate:

- Action items

- Lists of alternatives

- Lists of required steps that are not nece ssarily sequential.

•

Sequential lists (e.g., those that describe step-by-s te p pr oc ed ur e s) ap pe a r as nu m be re d lists.

Service Information

If you have a problem with your equipment, cont act th e “Sym bol Global Interactive Cen ter,” for your region. Go to http://www.symbol.com/contactsupport Partner, contact that Business Partner for service.

Before contacting, have the model number and serial number at h and. If your problem can not be solved b y the Symbol Global Interactive Center, you may need to return your equipment for servicing and you will be given specific directions.

Motorola is not responsible for any damages incurred dur ing shipment if the ap proved shipping cont ainer is not used. Shipping the units improperly can possibly void the warranty.

About This Guide xi

. If you purchased your Symbol product from a Symbol Business

xii MC909X User Guide

Chapter 1

Getting Started

Introduction

This chapter lists the accessories for the mobile computer and explains how to install and char ge the batteries , replace the strap and start the mobile computer for the first time.

Chapter 1

Getting Started

Scan Button

Keypad

Handstrap

Indicator LED Bar Touch Screen

Microphone (Windows Mobile 5.0 only)

Headphone Jack (Windows Mobile

5.0 only)

Power Button

Trigger

Figure 1-1

MC9090-G

1 - 2 MC909X User Guide

Scan Button or

Walkie-Talkie Button

on MC9097-K

Microphone

Touch Screen

Indicator LED Bar

Power

Scan Button

Keypad

Battery Release Latch

Headphone

Jack

Scan Button

Exit Window

Stylus

Scan

Button

Stylus

Strap

Exit Window

Scan Button (MC9094-K) Walkie-Talkie Button (MC9097-K)

SIM Door

Figure 1-2

MC9090-K MC9094-K

MC9097-K

MC909X-K

Getting Started 1 - 3

Walkie-Talkie Button

Headphone

Jack

Scan Button or

on MC9097-S

Exit Window

Microphone

Touch Screen

Indicator LED Bar

Power Button

Scan Button

Keypad

Exit Window

Stylus

Scan

Button

Figure 1-3

MC909X-S

MC9090-S

Scan

Button

Strap

Stylus

Battery

Release

Latch

Scan Button (MC9094-S) Walkie-Talkie Button (MC9097-S)

SIM Door

MC9094-S MC9097-S

1 - 4 MC909X User Guide

Unpacking the Mobile Computer

Carefully remove all protective material from around the mobile computer and save the shipping container for

later storage and shipping.

Verify that you received all equipment listed below:

•

mobile computer

•

lithium-ion battery

•

strap, attached to the mobile computer

•

stylus, in the stylus silo

•

Regulatory Guide

•

Quick Start Guide (poster).

Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,

contact the Symbol Global Interactive Center immediately. See page xi for contact information.

Accessories

Table 1-1 lists the accessories available for the MC909X:

Table 1-1

Cable Adapter Module (CAM)

Four Slot Charge Only Cradle

Four Slot Ethernet Cradle Charges the mobile computer main battery and synchronizes the mobile computer

Four Slot Spare Battery Charger

MC909X Accessories

Accessory Description

Snap-on required to connect the following cables to the mobile computer. AC line cord (country-specific) and power supply, charges the mobile computer. Auto charge cable, charges the mobile computer using a vehicle’s cigarette

lighter. DEX cable, connects the mobile computer to a vending machine. Serial cable, adds serial communication capabilities. USB cable, adds USB communication capabilities. Printer cable, adds printer communication capabilities.

Charges the mobile computer main battery.

with a host computer through an Ethernet connection. Charges up to four mobile computer spare batteries.

Headphone Use in noisy environments. Holster Holds the mobile computer when not in use. Keypads (Optional) Application specific keypads. Magnetic Stripe Reader

Snaps on to the mobile computer and adds magstripe read capabilities.

(MSR)

Getting Started 1 - 5

Table 1-1

MC909X Accessories

Accessory Description

Modem Module Enables data communication between the mobile computer and a host computer,

remotely through the phone lines, and synchronizes information between the

mobile computer and a host computer. Storage Card Provides secondary non-volatile storage. Single Slot Serial/USB

Cradle

Charges the mobile computer main battery and a spare battery. It also

synchronizes the mobile computer with a host computer through either a serial or

a USB connection. Software Symbol Mobility Developer Kits available at: http://support.symbol.com.

Device Configuration Package (DCPforMC9090c50) and Platform SDK

(PSDK9090c50) for MC9090-G with Windows CE 5.0 only, available at:

http://support.symbol.com.

Spare lithium-ion battery Replacement battery. Stylus Performs pen functions. Universal Battery Charger

Adapts the UBC for use with the Series 9000 batteries. Adapter

Wall Mounting Bracket and

Use for wall mounting applications. Shelf Slide

Getting Started

In order to start using the mobile computer for the first time:

•

install the main battery

•

charge the main battery and backup battery

•

start the mobile computer

•

configure the mobile computer.

The main battery can be charged before or af ter it is inst alled. Use on e of the spa re batte ry char gers to charge the main battery (out of the mobile computer), or one of the cradles to charge the main battery installed in the mobile computer.

1 - 6 MC909X User Guide

Installing and Removing the Main Battery

Installing the Main Battery

Before using the mobile computer , install a lithium-ion battery by sliding the battery into the mobile computer as shown in Figure 1-4.

NOTE Ensure the battery is fully inserted. Two audible clicks can be heard as the battery is fully inserted. A

partially inserted battery may result in unintentional data loss.

When a battery is fully inserted in a mobile computer for the first time, upon the mobile computer’s first power up, the device boots and powers on automatically.

Figure 1-4

Installing the Main Battery

Charging the Battery

Charging the Main Battery and Memory Backup Battery

Before using the mobile computer for the first time, charge the main battery until the amber charge indicator light remains lit (see T able 1-2 on page 1-7 for charge status indications). The main battery fully char ges in less than four hours. The mobile computer can be charged using a cradle, the CAM, or the MSR with the appropriate power supply.

The mobile computer is also equipped with a memory backup battery which automatically charges from the main battery whether or not the mobile computer is operating or is in suspend mode. The memory backup battery retains data in memory for at least 30 minutes when the mobile computer's main battery is removed or fully discharged. When the mobile computer is used for the first time or after the memory backup battery has fully discharged, the memory backup battery requires approximately 15 hours to fully charge. Do not remove the main battery from the mobile computer for 15 hours to ensure that the memory backup battery fully charges. If the main battery is removed from the mobile computer or the main battery is fully discharged, the memory backup battery completely discharges in several hours.

Getting Started 1 - 7

When the main battery reaches a very low battery state, the combination of main battery and backup battery retains data in memory for at least 72 hours.

NOTE Do not remove the main battery within the first 15 hours of use. If the main battery is removed before

the backup battery is fully charged, data may be lost.

Use the following to charge batteries:

•

Cradles: The mobile computer slips into the cr adles for cha rging the ba tter y in the mobile com puter (a nd spare batteries, where applicable). For detailed cradle setup and charging procedures refer to the MC909X Integrator Guide.

- Single Slot Serial/USB Cradle.

- Four Slot Ethernet Cradle

- Four Slot Charge Only Cradle.

•

Accessories: The mobile computer snap-on accessories provide charging capability, when used with one of the accessory charging cables. For detailed snap-on setup and charging procedures refer to the MC909X Integrator Guide.

- CAM

- MSR.

•

Chargers: The mobile computer spare battery charging accessories are used to charge batteries that are removed from the mobile computer. For detailed spare battery charging accessories setup and charging procedures refer to the MC909X Integrator Guide.

- Single Slot Serial/USB Cradle

- Four Slot Spare Battery Charger

- Universal Battery Charger (UBC) Adapter.

NOTE To achieve the best battery life in mobile computers with multiple radios, turn off the radios that are not

being used. This can be accomplished via the SetDevicePower() API (refer to the SMDK Help File for Symbol Mobile Computers) or via the Control Panel application (tap Start - 9000 Demo - Ctl Panel icon).

To charge the main battery:

1. Ensure the accessory used to charge the main battery is connected to the appropriate power source.

2. Insert the mobile computer into a cradle or attach the appropriate snap-on module.

3. The mobile computer starts to charge automatically. The amber charge LED, in the Indicator LED Bar,

lights to indicate the charge status. See Table 1-2 for charging indications.

The main battery usually fully charges in less than four hours.

Table 1-2

Mobile Computer LED Charge Indicators

LED Indication

Off Mobile computer not in cradle or connected to a CAM or MSR. Mobile computer not

placed correctly. Charger is not powered.

1 - 8 MC909X User Guide

Table 1-2

Mobile Computer LED Charge Indicators (Continued)

LED Indication

Fast Blinking Amber Error in charging; check placement of the mobile computer. Slow Blinking Amber Mobile computer is charging. Solid Amber Charging complete.

Note: When the battery is initially inserted in the mobile computer, the amber LED flashes once if the battery power is low or the battery is not fully inserted.

Charging Spare Batteries

Use the following three accessories to charge spare batteries:

•

Single Slot Serial/USB Cradle

•

Four Slot Spare Battery Charger

•

UBC Adapter.

To charge a spare battery:

1. Ensure the accessory used to charge the spare battery is connected to the appropriate power sou rc e.

2. Insert the spare battery into the accessory’s spare battery charging slot with the charging contacts facing

down (over the charging pins) and gently press down on the battery to ensure proper contact.

3. The battery starts to charge automatically. The amber charge LED on the accessory lights to show the

charge status.

The spare battery usually fully charges in less than four hours.

Removing the Main Battery

To remove the main battery:

1. Prior to removing the battery, press the red Power button. This sets the mobile computer to suspend

mode.

2. For the MC9097, wait 10 seconds before proceeding to the next step. If you do not you may need to

perform a warm boot after replacing th e battery.

3. Press the primary battery release(s). The battery partially ejects from the mobile computer.

4. Pause 3 to 4 seconds while the mobile computer performs battery removal shutdown.

5. Press the secondary battery release, on top of the batt ery, and slide the battery out of the mobile computer .

Secondary Battery Release

Getting Started 1 - 9

Primary Battery Releases

Figure 1-5

Removing the Main Battery - MC909X-G/K

Primary Battery Release

Secondary

Battery Release

Figure 1-6

Removing the Main Battery - MC909X-S

Starting the Mobile Computer

Press the red Power button to turn on the mobile computer. If the mobile computer does not power on, perform a cold boot. See Resetting the Mobile Computer on page 2-53.

NOTE When a battery is fully inserted in a mobile computer for the first time, upon the mobile computer’s first

power up, the device boots and powers on automatically.

When the mobile computer is powered on for the first time, it initializes its system. The Symbol splash screen (Figure 1-7) appears for a short period of time.

1 - 10 MC909X User Guide

MC9090/4 MC9097

Figure 1-7

Symbol Splash Window

Calibrating the Screen

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:

1. Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears

on the screen.

NOTE To re-calibrate the screen at anytime, press FUNC + ESC on the mobile computer to launch the

calibration screen application.

2. Repeat as the target moves around the screen or press ESC to cancel.

Checking Battery Status

To check whether the main battery or backup battery in the mobile computer is charged:

•

On Windows CE 5.0 devices: tap Start > Settings > Control Panel > Power icon to display the Battery

Status

window.

•

On Windows Mobile 5.0 devices: tap Start > Settings > System tab > Power icon to display the Power window.

To save battery power, set the mobile computer to turn off after a specified number of minutes.

SIM Card

The SIM card, or smart card, is required for MC9094 (GPRS) phone service and must be obtained from the phone service provider. The MC9097 (iDEN) comes from the factory with an un-activated SIM card installed. You must contact your service provider to activate the SIM card.

The card fits into the mobile computer and can contain the following information:

•

Getting Started 1 - 11

NOTE Subscriber Identification Module (SIM) card is only used in the MC9094 and MC9097 configurations.

NOTE On the MC9097, it is not recommended that you swap the SIM card with another SIM card.

Mobile phone service provider account details. Information regarding service access and preferences. Contact information, which can be moved to Contacts on the mobile computer.

Any additional services to which the user may have subscribed.

NOTE For more information about SIM cards, refer to the mobile phone service provider's documentation.

To install the SIM card:

1. Place the mobile computer into the suspend mode by pressing the red Power button.

2. Remove the SIM housing cover on the back of the mobile computer.

SIM

Housing Cover

Figure 1-8

3. Unlock the SIM holder by sliding the metal clip to the open position.

4. Lift the SIM holder.

Removing SIM Cover

1 - 12 MC909X User Guide

SIM Holder

Figure 1-9

5. Insert the SIM card, as shown in Figure 1-10, with the cut edge of the card facing out and the contacts

Unlock SIM Case

facing down.

6. Lower the SIM holder.

Figure 1-10

7. Lock the metal clip by sliding it to the closed position.

Inserting the SIM Card

Figure 1-11

8. Replace the SIM housing cover with one screw.

Locking the SIM Card Housing

Getting Started 1 - 13

Figure 1-12

9. Press the red POWER button.

10. On the MC9097, you must preform a master rest after installing a new SIM Card. a. Tap Start > Phone > Menu > Options > Error Log tab. b. Tap the Master Reset button. c. Tap OK. d. Once an “X” appears in the Phone Antenna icon (wait a few seconds), perform a warm boot. e. Wait for the mobile computer to reboot and register with the network, then perform a second warm

Replacing the SIM Door

NOTE On the MC9097, it is not recommended that you swap the SIM card with another SIM card. If you do

swap SIM cards, perform step 10.

boot.

11. Tap Start > Phone > Menu > Options > Network tab and verify that the service provider appears in the Current network: field.

12. Make a call to verify connection.

NOTE For detailed information about WWAN activation and settings, refer to the MC909X Integrator Guide.

On the MC9097, if the SIM door is removed without removing the SIM card, you must warm boot the mobile computer.

Stylus

Use the mobile computer stylus for selecting items and entering information. The stylus functions as a mouse.

•

Tap: Tou ch th e scr ee n on ce wi th th e sty lus to pre ss op tio n bu tto n s an d open me nu item s.

•

Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action you want to perform.

•

Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items.

1 - 14 MC909X User Guide

MC9090-G Strap

The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the strap:

1. Disconnect the metal clip at the handle.

2. Open strap loop and slide the handstrap through the loop.

3. Slide the loop out of the connector post.

4. Reverse the procedure to re-attach the strap. Two strap connectors are provided on the mobile computer’s

main body. The handstrap may be attached to either connector.

Strap Loop

Handstrap

Figure 1-13

Metal Clip

Reposition the Strap

MC909X-K Strap

The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the MC909X-K strap:

1. Lift the loop end of the strap over the button.

Loop

Button

Getting Started 1 - 15

Connection Post

Figure 1-14

2. Pull the loop through the connection post.

3. Remove the battery.

4. Insert the loop into the opposite connection post.

5. Place the loop over the button and pull taught.

6. Replace the battery.

Repositioning the MC909X-K Strap

To replace the handstrap:

1. Remove two screws securing the strap bracket to the device.

1 - 16 MC909X User Guide

Screws

Strap Bracket

Figure 1-15

2. Lift the loop end of the strap over the button.

3. Pull the loop through the connection post.

4. Remove the battery.

5. Reverse the procedure to re-attach the strap.

Remove Strap Bracket

MC909X-S Strap

The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the MC909X-S strap, attach the MC909X-S strap to either the left or right side of the mobile computer to suit user preferences. To reposition the strap:

1. Remove the screw securing the bottom of the strap to the device.

2. Position the bottom end of the strap over the opposite screw hole.

3. Secure the strap to the device.

Getting Started 1 - 17

Screw

Strap Bracket

Figure 1-16

Repositioning the MC909X-S Strap

To replace the handstrap:

1. Remove two screws securing the strap bracket to the device.

Screws

Strap Bracket

Figure 1-17

2. Remove the screw securing the bottom of the strap to the device.

3. Reverse the procedure to re-attach the strap.

Remove Strap Bracket

1 - 18 MC909X User Guide

Battery Management

Battery Saving Tips

•

Leave the mobile computer connected to AC power at all times when not in use.

•

Set the mobile computer to turn off after a short period of non-use.

•

Set the display and keyboard backlight to turn off after a short period of non-use.

•

Turn off all wireless radio activity when not in use.

•

Power off the mobile computer when charging to charge at a faster rate.

Changing the Power Settings

To set the mobile computer to turn off after a short period of non-use:

1. On devices with Windows CE 5.0, tap Start > Settings > Control Panel > Power icon > Power Off tab.

or On devices with Windows Mobile 5.0, tap

2. Select the On battery power: Turn off devic e if not used for: check box and select a value from the

Start > Settings > System tab > Power icon > Advanced tab.

drop-down list box.

3. Tap OK.

Changing the Display Backlight Settings

To change the display backlight settings in order to conserve more battery power:

1. On devices with Windows CE 5.0, tap Start > Settings > Control Panel > Backlight icon > Battery Power tab.

or On devices with Windows Mobile 5.0, tap

tab.

2. Select the On battery power: Disable backlight if not used for: check box and selec t a value from the

drop-down list box.

3. Tap the Brightness tab.

4. Tap the Disable backlight check box to completely turn off the display backlight.

Start > Settings > System tab > Backlight icon > Battery Power

5. Use the slider to set the brightness of the backlight. Set it to a low value to save battery power.

6. Tap OK.

Changing the Keypad Backlight Settings

To change the keypad backlight setting s in or de r to cons er ve mor e ba tt er y po wer :

1. On devices with Windows CE 5.0, tap Start > Settings > Control Panel > Keylight icon > Battery Power tab.

Getting Started 1 - 19

On devices with Windows Mobile 5.0, tap

2. Select the On battery power: Disable keylight if not used for: check box and select a value from the

drop-down list box.

3. Tap the Advanced tab.

4. Tap the Disable keylight check box to completely turn off the display backlight.

5. Tap OK.

Turning Off the Radios

On Devices with Mobile 5.0 AKU 1.0

NOTE To determine the operating system AKU version, see Configurations on page vi.

Turning Off the WLAN Radio

To turn off the WLAN radio tap the Wireless Connection Status icon at the bottom of the Today screen and select

Disable Radio. A red X appears across the icon indicating that the radio is disabled (off).

Start > Settings > System tab > Keylight icon > Battery Power tab.

Wireless Connection Status Icon

Figure 1-18

To turn the radio back on, tap the

Enable Radio. The red X disappears from the icon indicating that the radio is enabled (on).

Wireless Connection Status Icon

Wireless Connection Status icon at the bottom of the Today screen and select

Bluetooth and WWAN Radios

NOTE The Fight Mode feature only turns off the WWAN and Bluetooth radios. The WLAN radio must be turned

off separately.

To turn off the Bluetooth and WWAN radios, tap the Connectivity icon (on non-WWAN devices) or the

Antenna/Signal icon (on WWAN devices) and select Turn On Flight Mode.

NOTE On the MC9097, it takes tw o to five seconds for the radio to shut down.

1 - 20 MC909X User Guide

To turn on the Bluetooth and WWAN radios, tap the Connectivity icon (on non-WWAN devices) or the

Antenna/Signal icon (on WWAN devices) and select Turn Off Flight Mode.

NOTE On the MC9097, wait 20 to 40 seconds for the radio to power on. During this time do not suspend the

mobile computer or remove the battery. If the mobile computer is suspended or the battery is removed, warm boot the mobile computer.

On Devices with Mobile 5.0 AKU 2.2 and higher

NOTE To determine the operating system AKU version, see Configurations on page vi.

Windows Mobile 5.0 devices with AKU 2.2 and higher include Wireless Manager, which provides a simple method of enabling, disabling, and configuring all the device’s wireless capabilities in one place.

To open

Figure 1-19

Select

Wireless Manager, tap the Connectivity icon.

Wireless Manager.

Opening Wireless Manager

Figure 1-20

Wireless Manager Window

To enable or disable a wireless connection, tap its blue bar.

To enable or disable all wireless connections, tap and hold the All bar.

Getting Started 1 - 21

To configure settings for a connection, tap

Figure 1-21

Wireless Manager Menu

Menu.

On Device with CE 5.0 (OEM Version 01.15 and lower)

NOTE To determine the operating system OEM version, see Configurations on page vi.

WLAN Radio

To turn off the WLAN radio:

1. Tap Start > Settings > Control Panel > Power icon > PwrDevices tab.

2. In the text box, scroll down until WLP1: displays.

3. Select WLP1:. WLP1: displays in the text box at the top of the window.

4. In the drop-down list box, select D4.

5. Tap Set.

To turn on the radio:

1. Tap Start > Settings > Control Panel > Power icon > PwrDevices tab.

2. In the text box, scroll down until WLP1: displays.

3. Select WLP1:. WLP1: displays in the text box at the top of the window.

4. In the drop-down list box, select D0.

5. Tap Set.

Bluetooth Radio

To turn off the Bluetooth radio, tap Bluetooth icon in the task tray and select Disable Bluetooth.

1 - 22 MC909X User Guide

Bluetooth Icon

Figure 1-22

To turn on the Bluetooth radio, tap

Bluetooth Icon

Bluetooth icon in the task tray and select Enable Bluetooth.

On Device with CE 5.0 (OEM Version 01.16 and higher)

NOTE To determine the operating system OEM version, see Configurations on page vi.

WLAN Radio

To turn off the WLAN radio tap the Wireless Connection Status icon on the task tray and select Disable Radio. A red X appears across the icon indicating that the radio is disabled (off).

Wireless Connection Status Icon

Figure 1-23

To turn the radio back on, tap the red X disappears from the icon indicating that the radio is enabled (on).

Bluetooth Radio

Wireless Connection Status Icon

Wireless Connection St atu s icon on the task tray and select Enable Radio. The

To turn off the Bluetooth radio, tap Bluetooth icon in the task tray and select Disable Bluetooth.

Bluetooth Icon

Figure 1-24

To turn on the Bluetooth radio, tap

Bluetooth Icon

Bluetooth icon in the task tray and select Enable Bluetooth.

Chapter 2

Operating the MC909X

Introduction

This chapter explains the physical buttons, status icons and controls on the mobile computer, how to use the mobile computer, including instructions for powering on and resetting the mobile computer, using the stylus and a headset, entering information and scanning.

Status Icons (Windows CE 5.0)

The Taskbar at the bottom of the window displays the active programs, current time, batt er y status an d communication status.

Operating the MC909X

Status Icons

Start Button

Figure 2-1

Status icons are shown in the taskbar to indicate present status of the mobile computer. Double tapping each status icon displays the corresponding setup window and enable s you to cha nge or ad just its settings from the window.

Table 2-1

Status Icon Description

Taskbar

Status Icons

Indicates the current time. This icon indicates that the keyboard input panel is selected.

This icon indicates that the keyboard input panel is hidden.

Open Programs

Date/Time Properties

Desktop Button

2 - 2 MC909X User Guide

Table 2-1

Status Icon Description

Status Icons (Continued)

This icon indicates that the main battery is charging or that the terminal is operating on AC power.

Double tapping on this icon opens the

Power Properties

Indicates that the battery is fully charged and the mobile computer is running on external power.

This icon is displayed when the memory backup battery level is low. Charge the battery.

This icon indicates that the battery is fully charged (100% charged). The battery status icons provide the battery status in 10% increments from 10% to 100%.

It is displayed when the terminal is connected to a host computer with a serial cable.

Wireless connection status icon. Indicates WLAN signal strength.

The

Bluetooth Enabled

icon appears in the task tray and indicates that the Bluetooth radio is on.

window.

ALT

The

Bluetooth Disabled

The

Bluetooth Communication

icon appears in the task tray and indicates that the Bluetooth radio is off.

icon appears in the task tray and indicates that the mobile

computer is communicating with another Bluetooth device. Indicates that the

Indicates that the

Indicates that the mobile computer is in

SHIFT

FUNC

CTRL

ALT

button function is selected.

character selection is selected.

ALPHA

button mode is selected.

Status Icons (Windows Mobile 5.0)

Status Bar

The Status Bar at the top of the window displays the current time, battery status and communication status.

Operating the MC909X 2 - 3

Start Button

Figure 2-2

Statu s icons are shown in the icon displays the corresponding dialog box and enables you to change or adjust its settings. You may see the status icons listed in Table 2-2 on the

Table 2-2

Icon Function Description

Audio Speaker is on.

Battery Backup battery is very low. Main battery is charging.* Main battery is low. (AKU 2.2.1 and lower)

Stat us Bar

Status Bar to indicate present status of the mobile computer. Tapping each status

Status Bar loca te d at th e top of th e scr ee n.

Status Icons

Speaker is off.

Stat us Ico n s

Volume Icon

Date/Time

Main battery is very low. (AKU 2.2.1 and lower) Main battery is full.* (AKU 2.2.1 and lower)

Main battery level.* (AKU 3.2 and higher) Main battery is very low.* Connectivity Connection is active.

ActiveSync error

GPRS available.

GPRS in use.

EGPRS available.

EGPRS in use. Synchronization is occurring. * Only appears in the Time and Next Appointment dialog box.

2 - 4 MC909X User Guide

Table 2-2

Icon Function Description

Status Icons (Continued)

WWAN Call missed.

Voice call. Voice call in progress. Data call in progress. Calls are forwarded. Call on hold. Antenna/signal icon: wireless on/good signal. Antenna/signal icon: wireless off. Antenna/signal icon: no service or searching. Antenna/signal icon: lost signal. Antenna/signal icon: no signal. Roaming icon. Outside of your home area.

Missing SIM Card icon: SIM Card not installed or installed improperly. Instant Message Notification that one or more instant messages were received. E-Mail Notification that one or more e-mail messages were received.

Voice Mail Notification that one or more voice messages were received.

Time and Next Appointment

Multiple Notifications There are more notification icons than can be displayed. Tap to display

* Only appears in the Time and Next Appointment dialog box.

Displays current time in analog or digital format.

remaining icons.

Command Bar

You may see the icons listed in Table 2-3 on the Command Bar located at the bottom of the screen.

Status Icons

Figure 2-3

Command Bar

Operating the MC909X 2 - 5

Table 2-3

Icon Description

Command Bar Icons

Wireless connection status icon. Indicates WLAN signal strength and opens the Wireless Applications menu.

The

Bluetooth Enabled

Bluetooth Disabled

The

Bluetooth Communication

The

icon appears in the task tray and indicates that the Bluetooth radio is on.

icon appears in the task tray and indicates that the Bluetooth radio is off.

icon appears in the task tray and indicates that the mobile computer

is communicating with another Bluetooth device. The

ActiveSync

icon appears in the task tray and indicates an active conn ection betwe en the mobile

computer and the development computer.

Speaker Icon

You can adjust the system volume and the phone volume (on MC9094 and MC9097 devices) using the

Speaker icon in the Status bar.

1. Tap the Speaker icon. The Volume dialog box appears.

Figure 2-4

2. Tap and move the slide bar to adjust the volume.

3. Select the On or Off radio button to turn the volume on or off.

Volume Dialog Box

NOTE When not in a call, the phone volume slider adjusts the volume of the ringer. When in a call, adjusts the

volume of the call audio.

2 - 6 MC909X User Guide

NOTE Use can also adjust the system volume using the Sounds & Notifications window or by pressing the

Blue key and 6 or the Blue key and 7.

Battery Icon

In AKU 2.2.1 and lower, the Battery icons display on the Title Bar when the main battery or backup battery power falls below a predetermined level. A backup battery.

Battery dialog box also appears indicating the stat us of the ma in or

Figure 2-5

AKU 3.2 and higher , the indicates the battery power level.

Figure 2-6

You can also view the battery status using the

Battery Status Dialog Box

Battery icon always appears in the Title Bar when the Today screen is visible. The icon

Battery Icon on the Title Bar

Connectivity Icon

Power window.

The Connectivity icon indicates the communication st atus of the terminal when it’s connecting to the internet or host computer.

Operating the MC909X 2 - 7

Figure 2-7

Connectivity Dialog Box

Time Icon

NOTE In AKU 2.2 and higher, the Time icon only appears in the Title Bar when an application displays. It does

not appear it the Title Bar when the Today screen displays.

The Time icon displays the current time in a digital or analog format. To change the time format, tap and hold the

Time icon until a menu appears. Select the format you want.

Analog ClockDigital Clock

Figure 2-8

To display current date, time and appointments:

1. Tap the Time icon to display the Time and Next Appointment dialog box.

Upcoming Appointments

Time Icon Format Menu

Battery Status Icon

Current Date and Time

Figure 2-9

2. The dialog box displays the current date and time, the battery status and any upcoming appointments in

the

Time and Next Appointment Dialog Box

Calendar.

Instant Message Icon

The Instant Message icon notifies you when MSN Messenger has received a new incoming message.

Figure 2-10

MSN Messenger Dialog Box

2 - 8 MC909X User Guide

E-Mail Icon

The E-Mail icon notifies you when you have received incoming e-mails.

Figure 2-11

New E-mail Messages Dialog Box

Multiple Notification Icon

The Multiple Notification icon appears when two or more message notifications occur. Tap the icon to display the multiple notification icons.

Figure 2-12

Multiple Notifications Icon

Locking the Mobile Computer (Windows Mobile 5.0 Only)

Use the Device Lock feature to prevent use of the device . No te th at when lock ed , the mo bile compu te r do e s not respond to screen or keypad input.

To lock the device, tap the

Figure 2-13

To unlock the device and free it for use, tap

Device Locked/Unlocked Icons

Device unlocked icon. The icon changes to locked.

Unlock.

Operating the MC909X 2 - 9

Figure 2-14

Tap Unlock on the

LED Indicators

The MC909X has an LED Indicator Bar that contains LEDs that indicate scanning and charging status. Table

2-4 describes the LED indications.

Figure 2-15

Unlock Device Window

Unlock Device window.

LED Indicator Bar

MC909X LEDs Indicator Bar

Table 2-4

Solid Red Laser enabled, scanning/imaging in process. Solid Green Successful decode/capture. Slow Blinking Amber Main battery in mobile computer is charging. Fast Blinking Amber Error in charging; check placement of the mobile computer. Solid Amber Main battery in mobile computer is fully charged.

Mobile Computer LED Indications

LED State Indication

2 - 10 MC909X User Guide

Keypads

The mobile computer has the following interchangeable modular keypads:

•

28-key keypad (MC909X-K and MC9090-G only)

•

28-key keypad (MC909X-S only)

•

33-key keypad (MC909X-K only)

•

38-key numeric/function keypad (MC909X-S only)

•

38-key alpha/shifted numeric keypad (MC909X-S only).

•

43-key keypad (MC909X-K and MC9090-G only)

•

53-key keypad (MC909X-K and MC9090-G only)

•

3270 Emulator (MC9090-G only)

•

5250 Emulator (MC9090-G only)

•

VT Emulator . (MC9090-G only).

The modular keypads can be changed in the field, as necessary, to support specialized applications. Refer to the MC909X Integrator Guide for installation and removal procedures.

NOTE For information about using the soft keyboard input panel, refer to the Microsoft Application Guide for

Symbol Devices.

Operating the MC909X 2 - 11

28-Key Keypad for MC909X-G/K

The 28-key keypad contain s a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-5 on page

2-13 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-16

28-Key Keypad for MC909X-G/K

2 - 12 MC909X User Guide

28-Key Keypad for MC909X-S

The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-5 on page

2-13 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-17

28-Key Keypad for MC909X-S

Operating the MC909X 2 - 13

Table 2-5

Power (red) Turns the mobile computer on and off.

Green/Red Dot

28-Key Descriptions

Key Description

Performs a warm boot when held down for five seconds. See

Devices on page 2-54

MC9094 and MC9097:

Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).

Red dot: press on phone keypad window to stop dialing or end a call.

MC9090:

To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and inst alled. However, the Green/Red dot keys can be remapped as APP keys through the registry.

Create an XML Provisioning file with the following entries: Characteristic type =“HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD” Parm name = “GreenKeyOverride” value = “xx”, where xx is the new APP key code. Parm name = “RedKeyOverride” value = “xx”, where xx is the new APP key code.

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

for information about performing a warn boot.

Windows Mobile 5.0

Scan (yellow) Activates the scanner/imager in a scan enabled application.

Scroll Up and Down Moves up and down from one item to another.

Increases/decreases specified values.

Scroll Left and Right Moves left and right from one item to another.

Increases/decreases specified values.

ESC Exits the current operation.

One/Star Produces the number one in default state.

Produces an asterisk in Alpha state.

2 - 14 MC909X User Guide

Table 2-5

28-Key Descriptions (Continued)

Key Description

Alphanumeric In default state, produces the numeric value on the key.

GHI5JKL6MNO

In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence. For example, press and release the ALPHA key and then press the ‘4’ key once to produce the letter ‘g’; press and release the ALPHA key and then press the ‘4’ key three times to produce the letter ‘i’.

When the SHIFT key is pressed in Alpha state, the upper case alphabetic c haracters on the key are produced. For example, press and release the ALPHA key, press and release the SHIFT key and then press the ‘4’ key once to produce the letter ‘G’; press and release the ALPHA key, press and release the SHIFT key and then press the ‘4’ key three times to produce the letter ‘I’.

SPACE/BKSP Space and backspace functions.

CTRL (Control) Press and release the CTRL key to activate the keypad alternate CTRL functions.

LED

The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 5.0

devices. Press the Blue key followed by the CTRL key to activate the keypad alternate ALT

functions. The icon appears on the taskbar on WinCE devices or the icon

ALT

appears at the bottom of the screen on Windows Mobile 5.0 devices.

ALPHA Press and release the ALPHA key to activate the keypad alternate functions (shown

LED

on the keypad in orange). The LED above the key lights when the key is depressed. The icon appears on the taskbar on WinCE device s and the icon appears at

the bottom of the screen on Windows Mobile 5.0 devices. Press and release the ALPHA key again to return to the normal keypad functions.

Function (blue) Press and release the blue function key to activate the keypad alternate functions

LED

(shown on the keypad in blue). The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of

the screen on Windows Mobile 5.0 devices. Press and release the blue function key again to return to the normal keypad functions.

SHIFT Press and release the SHIFT key to activate the keypad alternate SHIFT functions.

The icon appears on the taskbar on WinCE device s and the icon appears at the bottom of the screen on Windows Mobile 5.0 devices. Press and release the SHIFT key again to return to the normal keypad functions.

Operating the MC909X 2 - 15

Table 2-5

ENT (Enter) Executes a selected item or function.

Period/Decimal Point In default state, produces a period for alpha entries and a decimal point for numeric

Zero In default state, produces a zero.

28-Key Descriptions (Continued)

Key Description

For Windows Mobile 5.0:

The default behavior of the ENT (Enter) key sends an extra character, which causes a Microsoft Word or Notes application to exit. To make the applications work properly, create an XML Provisioning file with the following entries:

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD” Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

entries. In function key state, produces an asterisk. When the SHIFT key is pressed in function key state, produces an asterisk.

In Alpha state, produces a space.

Pound Produces a pound/number sign.

2 - 16 MC909X User Guide

33-Key Numeric/Function Keypad for MC909X-K

The 33-key numeric/function keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate alpha key (orange) values. Note that keypad functions can be changed by an application so th e mobile computer’s keypad may not function exactly as described. See Table 2-5 on page 2-13 for key and button descr iptions and

Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-18

33-Key Numeric/Function Keypad for MC909X-K

Operating the MC909X 2 - 17

Table 2-6

Power (red) Turns the mobile computer on and off.

Green/Red Dot

33-Key Keypad Descriptions

Key Description

Performs a warm boot and a cold boot. See for information about performing a warm and cold boot.

MC9094 and MC9097:

Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).

Red dot: press on phone keypad window to stop dialing or end a call.

MC9090:

To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Windows Mobile 5.0 Devices on page 2-54

Scan (yellow) Activates the scanner/imager in a scan enabled application.

Scroll Up and Down Moves up and down from one item to another.

Increases/decreases specified values.

Scroll Left and Right

ESC Exits the current operation.

Dash/SPACE Produces a dash in the default state or a space in the Alpha state.

Moves left and right from one item to another. Increases/decreases specified values.

2 - 18 MC909X User Guide

Table 2-6

33-Key Keypad Descriptions (Continued)

Key Description

Alphanumeric In default state, produces the numeric value on the key.

In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence. For example, press and release the ALPHA key and then press the ‘4’ key once to produce the letter ‘r’; press and release the ALPHA key and then press the ‘6’ key three times to produce the letter ‘r’.

When the SHIFT key is pressed in Alpha state, the upper case alphabe tic characters on the key are produced. For example, press and release the ALPHA key, press and release the SHIFT key and then press the ‘4’ key once to produce the letter ‘J’; press and release the ALPHA key, press and release the SHIFT key and then press the ‘4’ key three times to produce the letter ‘I’.

Application These keys can have an application assigned to the function value.

On Windows Mobile 5.0 devices: F6

and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the vol ume adjustment window. To get these keys to an application, call GXOpenInput() at the beginning of the application and call GXCloseInput() at the end of the application. This redirects all of the key events to an application, including the

Note:

Other applications cannot receive any key event until GXCloseInput() is called.

and F7 keys.

For example, if the customer is using the APP1 key to run Calc.exe, this is disabled during this period.

Function (blue) Press and release the blue function key to activate the keypad alternate functions

LED

(shown on the keypad in blue). The LED above the key lights and the icon appears at the bottom of the screen. Press and release the blue function key again to return to the normal keypad functions.

Control Press and release the CTRL key to activate the keypad alternate CTRL functions. The

LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 5.0 devices.

Press the Blue key followed by the CTRL key to activate the keypad alternate ALT functions. The icon appears on the taskbar on WinCE devices or the icon

ALT

appears at the bottom of the screen on Windows Mobile 5.0 devices.

ALPHA The default keypad mode is the n um-lock (number lock) mode. Press the orange

LED

key to de-activate the num-lock mode and to access the alternate

ALPHA

characters (shown on the keypad in orange). The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the

screen on Windows Mobile 5.0 devices. Press and release the ALPHA key again to return to the normal keypad functions.

Shift Press and release the

SHIFT

key to activate the keypad alternate SHIFT functions. The

icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 5.0 devices. Press and release the SHIFT key again to return to the normal keypad functions.

Use with the orange alpha-lock key for alpha character value.

Operating the MC909X 2 - 19

Table 2-6

Period/Decimal Point

HOME Moves the cursor to the beginning of a line.

ENTER Executes a selected item or function.

33-Key Keypad Descriptions (Continued)

Key Description

Produces a decimal point for numeric entries. Produces a period for alpha entries when

the ALPHA function key is activated.

For Windows Mobile 5.0:

The default behavior of the ENTER key sends an extra character, which causes a

Microsoft Word or Notes application to exit. To make the applications work properly,

create an XML Provisioning file with the following entries:

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD”

Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML

Provisioning.

2 - 20 MC909X User Guide

38-Key Numeric/Function Keypad for MC909X-S

The 38-key numeric/function keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate alpha key (orange) values. Note that keypad functions can be changed by an application so th e mobile computer’s keypad may not function exactly as described. See Table 2-5 on page 2-13 for key and button descr iptions and

Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-19

38-Key Numeric/Function Keypad for MC909X-S

Operating the MC909X 2 - 21

Table 2-7

Power (red)

Green/Red Dot

38-Key Numeric/Function for MC909X-S Keypad Descriptions

Key Description

Turns the mobile computer on and off. Performs a warm boot when held down for 5 seconds. See

Devices on page 2-54

for information about performing a warn boot.

MC9094 and MC9097:

Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).

Red dot: press on phone keypad window to stop dialing or end a call.

MC9090:

Refer to the MC909X Integrator Guide for instruction on updating the registr y using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Windows Mobile 5.0

Scan (yellow)

Scroll Up and Left

Scroll Down and Right

ESC

CTRL (Control)

LED

ALT

Activates the scanner/imager in a scan enabled application.

Moves up by default. Use with the orange alpha-lock key to move left.

Moves down by default. Use with the orange alpha-lock key to move right.

Exits the current operation.

Press and release the CTRL key to activate the keypad alternate CTRL functions. The

icon appears at the bottom of the screen. The LED above the key lights when the

key is depressed. Press the Blue key followed by the CTRL key to activate the keypad alternate ALT

functions. The icon appears at the bottom of the screen.

2 - 22 MC909X User Guide

Table 2-7

Alpha-lock (orange)

Function (blue)

Special Function/Alpha

SPACE

BKSP

38-Key Numeric/Function for MC909X-S Keypad Descriptions (Continued)

Key Description

LED

Press and release the orange alpha-lock key to activate the ke ypa d alternate alpha -lock functions (shown on the keypad in orange). The LED above the key lights and the

icon appears at the bottom of the screen. Press and release the orange alpha-lock key again to return to the default keypad functions.

Press and release the blue function key to activate the keypad alternate functions (shown on the keypad in blue). The LED above the key lights and the icon appears

at the bottom of the screen. Press and release the blue function key again to return to the normal keypad functions.

Programmable function (F1, F2, F3) by default. Use with the orange key for alpha character value. Use the blue key for function value.

SPACE function by default. Use with the orange key for alpha character value. Use the blue key for function value.

Backspace function by default. Use with the orange alpha-lock key for alpha character value. Use the blue function key for function value.

Numeric

TAB

SHIFT

Period/Decimal Point

Use for numeric characters by default. Use with the orange alpha-lock key for alpha character value. Use the blue function key for function value.

Use for tab functions by default. Use with the orange alpha-lock key for alpha character value. Use the blue function key for function value.

Press and release the SHIFT key to activate the keypad alternate SHIFT functions. The

icon appears at the bottom of the sc reen. Press and release the SHIFT key again to

return to the normal keypad functions. Use with the orange alpha-lock key for alpha character value.

In default state, produces a period for alpha entries and a decimal point for numeric entries.

Use with the orange alpha-lock key for alpha character value.

Operating the MC909X 2 - 23

Table 2-7

Star

ENT (Enter)

38-Key Numeric/Function for MC909X-S Keypad Descriptions (Continued)

Key Description

In default state, produces an asterisk. Use with the orange alpha-lock key for alpha character value.

Executes a selected item or function.

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD” Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registr y using XML Provisioning.

2 - 24 MC909X User Guide

38-Key Alpha/Shifted Numeric Keypad for MC909X-S

The 38-key alpha/shifted numeric keyp ad cont ains a Power button, application keys, scroll keys a nd a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate numeric key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-5 on page 2-13 for key and button description s and

Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-20

38-Key Alpha/Shifted Numeric Keypad for MC909X-S

Operating the MC909X 2 - 25

Table 2-8

Power (red)

Green/Red Dot

38-Key Alpha/Shifted Numeric for MC909X-S Keypad Descriptions

Key Description

Turns the mobile computer on and off. Performs a warm boot and a cold boot. See

2-54

for information about performing a warn and cold boot.

MC9094 and MC9097:

Windows Mobile 5.0 Devices on page

Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).

Red dot: press on phone keypad window to stop dialing or end a call.

MC9090:

Create an XML Provisioning file with the following entries: Characteristic type

=“HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD” Parm name = “GreenKeyOverride” value = “xx”, where xx is the new APP key code. Parm name = “RedKeyOverride” value = “xx”, where xx is the new APP key code.

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Scan (yellow)

Scroll Up and Left

Scroll Down and Right

ESC

CAP

BKSP

LED

Activates the scanner/imager in a scan enabled application.

Moves up by default. Use with the orange num-lock key to move left.

Moves down by default. Use with the orange num-lock key to move right.

Exits the current operation.

Use to produce capital alpha characters. The LED above the key lights and the icon appears at the bottom of the screen.

2 - 26 MC909X User Guide

Table 2-8

SPACE

Num-lock (orange)

Function (blue)

LED

Alpha

ENT (Enter)

38-Key Alpha/Shifted Numeric for MC909X-S Keypad Descriptions (Continued)

Key Description

LED

In default state, produces a space function.

Use with the orange num-lock key for the backspace function.

Press and release the orange num-lock key to activate the keypad alternate

num-lock functions (shown on the keypad in orange). The LED above the key lights

and the icon appears at the bottom of the screen. Press and re lease the oran ge

num-lock key again to return to the default keypad functions.

Press and release the blue function key to activate the keypad alternate functions

(shown on the keypad in blue). The LED above the key lights and the icon

appears at the bottom of the screen. Press and release the blue function key again to

return to the normal keypad functions.

Use for alpha characters by default.

Use with the orange num-lock key for numeric character values.

Use the blue function key for function values.

Executes a selected item or function.

For Windows Mobile 5.0:

The default behavior of the ENT (Enter) key sends an extra character, which causes

a Microsoft Word or Notes a pplication to exit. To make the applications work pro perly ,

create an XML Provisioning file with the following entries:

Characteristic type

=”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD”

Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registry using

XML Provisioning.

Operating the MC909X 2 - 27

43-Key Keypad for MC909X-G/K

The 43-key keypad contain s a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-9 on page 2-28 for key and button descriptions and Table 2-14 on

page 2-47 for the keypad’s special functions.

Figure 2-21

43-Key Keypad for MC909X-G/K

2 - 28 MC909X User Guide

Table 2-9

Power (red) Turns the mobile computer on and off.

Green/Red Dot

43-Key Keypad Descriptions

Key Description

Performs a warm boot and a cold boot. See for information about performing a warn and cold boot.

MC9094 and MC9097:

Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).

Red dot: press on phone keypad window to stop dialing or end a call.

MC9090:

To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Windows Mobile 5.0 Devices on page 2-54

Scan (yellow) Activates the scanner/imager in a scan enabled application.

Scroll Up and Down Moves up and down from one item to another.

Increases/decreases specified values.

Scroll Left and Right

ESC Exits the current operation.

SPACE/BKSP Space and backspace functions.

Numeric/Alpha Number or alpha value depending on the state of the ALPHA key.

Moves left and right from one item to another. Increases/decreases specified values.

Operating the MC909X 2 - 29

Table 2-9

43-Key Keypad Descriptions (Continued)

Key Description

Alpha/Application These keys can have an application assigned to the function value and have an alpha

value assigned when used with the ALPHA function key.

On Windows Mobile 5.0 devices: F6

Note:

Other applications cannot receive any key event until GXCloseInput() is called.

and F7 keys.

For example, if the customer is using the APP1 key to run Calc.exe, this is disabled during this period.

Function (blue) Press and release the blue function key to activate the keypad alternate functions

LED

(shown on the keypad in blue). The LED above the key lights and the icon appears at the bottom of the screen. Press and release the blue function key again to return to the normal keypad functions.

Control Press and release the CTRL key to activate the keypad alternate CTRL functions. The

LED above the key lights and the icon appears on the taskbar on WinCE devices or

LED

the icon appears at the bottom of the screen on Windows Mobile 5.0 devices. Press the Blue key followed by the CTRL key to activate the keypad alternate ALT

functions. The icon appears on the taskbar on WinCE devices or the icon

ALT

appears at the bottom of the screen on Windows Mobile 5.0 devices.

ALPHA (orange) The default keypad mode is the num-lock (number lock) mode. Press the oran ge

key to de-activate the num-lock mode and to access the alternate

ALPHA

characters (shown on the keypad in orange). The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the

screen on Windows Mobile 5.0 devices. Press and release the ALPHA key again to return to the normal keypad functions.

Shift Press and release the

SHIFT

key to activate the keypad alternate SHIFT functions. The

Use with the orange alpha-lock key for alpha character value.

Period/Decimal Point

Produces a period for alpha entries, a decimal point for numeric entries and the alphabetic character X when the ALPHA function key is activated.

ALPHA

2 - 30 MC909X User Guide

Table 2-9

Star Produces an asterisk and the alphabetic character Z when the ALPHA function key is

Enter Executes a selected item or function.

43-Key Keypad Descriptions (Continued)

Key Description

activated.

For Windows Mobile 5.0:

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD” Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

Operating the MC909X 2 - 31

53-Key Keypad for MC909X-G/K

There are two physical configurations of the 53-key keypad, however both of the keypads are functionally identical. The 53-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly a s describ ed . Se e Table

2-10 on page 2-32 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special

functions.

Figure 2-22

53-Key Keypad for MC909X-G/K

2 - 32 MC909X User Guide

Table 2-10

Power (red) Turns the mobile computer on and off.

Green/Red Dot

53-Key Descriptions

Key Description

Performs a warm boot and a cold boot. See

2-54

for information about performing a warn and cold boot.

MC9094 and MC9097:

Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).

Red dot: press on phone keypad window to stop dialing or end a call.

MC9090:

To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.

Create an XML Provisioning file with the following entries: Characteristic type

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Windows Mobile 5.0 Devices on page

Scan (yellow) Activates the scanner/imager in a scan enabled application.

Scroll Up and Down Moves up and down from one item to another.

Increases/decreases specified values.

Scroll Left and Right Moves left and right from one item to another.

Increases/decreases specified values.

ESC Exits the current operation.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Operating the MC909X 2 - 33

Table 2-10

53-Key Descriptions (Continued)

Key Description

Numeric/Application Numeric value keys - can have applications assigned with function key(s).

For Windows Mobile 5.0 devices: F6

and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window. To get these keys to an application, call GXOpenInput() at the beginning of the application and call GXCloseInput() at the end of the application. This redirects all of the key events to an application, including the

Note:

Other applications cannot receive any key event until GXCloseInput() is

and F7 keys.

called. For example, if the customer is using the APP1 key to run Calc.exe, this is disabled during this period.

Function (blue) Press and release the blue function key to activate the keypad alternate functions

LED

(shown on the keypad in blue). The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of

the screen on Windows Mobile 5.0 devices. Press and release the blue functio n key again to return to the normal keypad functions.

Control Press and release the CTRL key to activate the keypad alternate CTRL functions.

LED

The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mo bile 5.0

devices. Press the Blue key followed by the CTRL key to activate the keypad alternate ALT

functions. The icon appears on the taskbar on WinCE devices or the icon

ALT

appears at the bottom of the screen on Windows Mobile 5.0 devices.

Shift Press and release the SHIFT key to activate the keypad alternate SHIF T functions.

The icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 5.0 devices. Press and release the SHIFT key again to return to the normal keypad functions.

Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

2 - 34 MC909X User Guide

Table 2-10

Star Produces an asterisk.

Enter Executes a selected item or function.

53-Key Descriptions (Continued)

Key Description

For Windows Mobile 5.0 devices:

The default behavior of the ENT (Enter) key sends an ext ra charac ter, which causes a Microsoft Word or Notes application to exit. To make the applications work properly, create an XML Provisioning file with the following entries:

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD”

Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

Operating the MC909X 2 - 35

3270 Emulator Keypad for MC909X-G/K

There are two physical configurations of the 3270 emulator keypad, however both of the keypads are functionally identical. The 3270 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-11 on page 2-36 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-23

NOTE The 3270 emulator keypad is only used when the mobile computer is running the 3270 emulation

3270 Emulator Keypad for MC909X-G/K

software. When the mobile computer is not running the 3270 emulation software, the 3270 keypad functions are the same as a 53-key keypad.

2 - 36 MC909X User Guide

Table 2-11

Power (red) Turns the mobile computer on and off.

Green/Red Dot To use a key as an application key (APP key) on the keyboard, a new keyboard

Scan (yellow) Activates the scanner/imager in a scan enabled application.

3270 Emulator Descriptions

Key Description

Performs a warm boot and a cold boot. See

2-54

for information about performing a warn and cold boot.

remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.

Create an XML Provisioning file with the following entries: Characteristic type

=“HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD” Parm name = “GreenKeyOverride” value = “xx”, where xx is the new APP key

code. Parm name = “RedKeyOverride” value = “xx”, where xx is the new APP key code.

Refer to the MC909X Integrator Guide for instruction on updating the registry us ing XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Windows Mobile 5.0 Devices on page

Scroll Up and Down Moves up and down from one item to another.

Increases/decreases specified values.

Scroll Left and Right Moves left and right from one item to another.

Increases/decreases specified values.

CLR Exits the current operation.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Operating the MC909X 2 - 37

Table 2-11

3270 Emulator Descriptions (Continued)

Key Description

Application These keys can be assigned to an application.

On Windows Mobile 5.0 devices: F6

and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window. To get these keys to an application, call GXOpenInput() at the be ginning of the applicatio n and call GXCloseInput() at the end of the application. This redirects all of the key events to an application, including the

Note:

Other applications cannot receive any key event until GXCloseInput() is

and F7 keys.

called. For example, if the customer is using the APP1 key to run Calc.exe, this is disabled during this period.

Function (blue) Press and release the blue function key to activate the keypad alternate functions

LED

(shown on the keypad in blue). The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of

the screen on Windows Mobile 5.0 devices. Press and release the blue function key again to return to the normal keypad functions.

Control P ress and release the CTRL key to activate the keypad alternate CTRL functions.

LED

ALT

The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile

5.0 devices. Press the Blue key followed by the CTRL key to activate the keypad alternate ALT

functions. The icon appears on the taskbar on WinCE devices or the icon

ALT

appears at the bottom of the screen on Windows Mobile 5.0 devices.

Shift Press and release the SHIFT key to activate the key pad alte rnate SHIFT functions .

The icon appears on the taskbar on WinCE devic es or the icon ap pears at the bottom of the screen on Windows Mobile 5.0 devices. Press and release the SHIFT key again to return to the normal keypad functions.

Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

2 - 38 MC909X User Guide

Table 2-11

Star Produces an asterisk.

Enter Executes a selected item or function.

3270 Emulator Descriptions (Continued)

Key Description

For Windows Mobile 5.0:

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD”

Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registry us ing XML Provisioning.

Operating the MC909X 2 - 39

5250 Emulator Keypad for MC909X-G/K

There are two physical configurations of the 5250 emulator keypad, however both of the keypads are functionally identical. The 5250 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-12 on page 2-40 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-24

NOTE The 5250 emulator configuration is only used when the mobile computer is running the 5250 emulation

5250 Emulator Keypad for MC909X-G/K

software. When the mobile computer is not running the 5250 emulation software, the 5250 keypad functions are the same as a 53-key keypad.

2 - 40 MC909X User Guide

Table 2-12

5250 Emulator Descriptions

Key Description

Power (red) Turns the mobile computer on and off.

Green/Red Dot

Performs a warm boot and a cold boot. See

2-54

for information about performing a warn and cold boot.

To use a key as an application key (APP key) on the keyboard, a new keyboard

Windows Mobile 5.0 Devices on page

remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.

Create an XML Provisioning file with the following entries: Characteristic type

=“HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD” Parm name = “GreenKeyOverride” value = “xx”, where xx is the new APP key

code. Parm name = “RedKeyOverride” value = “xx”, where xx is the new APP key code.

Refer to the MC909X Integrator Guide for instruction on updating the reg istry using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Scan (yellow) Activates the scanner/imager in a scan enabled application.

Scroll Up and Down Moves up and down from one item to another.

Scroll Left and Right Moves left and right from one item to another.

ENT Exits the current operation.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Operating the MC909X 2 - 41

Table 2-12

5250 Emulator Descriptions (Continued)

Key Description

Application These keys can be assigned to an application.

On Windows Mobile 5.0 devices: F6

and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume a djustment window. To get these keys to an application, call GXOpenInput() at the beginning of the application and call GXCloseInput() at the end of the application. This redirects all of the key events to an application, including the

Note:

Other applications cannot receive any key event until GXCloseInput() is

and F7 keys.

called. For example, if the customer is using the APP1 key to run Calc.exe, this is disabled during this period.

Function (blue) Press and release the blue function key to activate the keypad alternate functions

LED

(shown on the keypad in blue). The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of

the screen on Windows Mobile 5.0 devices. Press and release the blue function key again to return to the normal keypad functions.

Control Press and release the CTRL key to activate the keypad alternate CTRL functions.

LED

ALT

The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile

5.0 devices. Press the Blue key followed by the CTRL key to acti vate the keypad alternate ALT

functions. The icon appears on the taskbar on WinCE devices or the icon

ALT

appears at the bottom of the screen on Windows Mobile 5.0 devices.

Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions.

Period/Decimal Point Produces a period for alpha entries and a decimal point for numeric entries.

2 - 42 MC909X User Guide

Table 2-12

Star Produces an asterisk.

Enter Executes a selected item or function.

5250 Emulator Descriptions (Continued)

Key Description

For Windows Mobile 5.0:

The default behavior of the Enter key sends an extra character, which causes a Microsoft Word or Notes application to exit. To make the applications work properly, create an XML Provisioning file with the following entries:

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD”

Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the reg istry using XML Provisioning.

Operating the MC909X 2 - 43

VT Emulator Keypad

The VT emulator keypad contains a Power button , application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-13 on

page 2-44 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.

Figure 2-25

NOTE The VT emu l ator configuration is only used when the mobile computer is running the VT emulation

VT Emulator Keypad

software. When the mobile computer is not running the VT emulation software, the VT keypad functions are the same as a 53-key keypad.

2 - 44 MC909X User Guide

Table 2-13

VT Emulator Descriptions

Key Description

Power (red) Turns the mobile computer on and off.

Green/Red Dot

Performs a warm boot and a cold boot. See

2-54

for information about performing a warn and cold boot.

To use a key as an application key (APP key) on the keyboard, a new keyboard

Windows Mobile 5.0 Devices on page

remap table must be created and install ed. However, the Green/Red dot keys can be remapped as APP keys through the registry.

Create an XML Provisioning file with the following entries: Characteristic type

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.

Scan (yellow) Activates the scanner/imager in a scan enabled application.

Scroll Up and Down Moves up and down from one item to another.

Scroll Left and Right Moves left and right from one item to another.

ESC Exits the current operation.

Alpha Use the alpha keys for alphabetic characters.

SPACE/BKSP Space and backspace functions.

Operating the MC909X 2 - 45

Table 2-13

VT Emulator Descriptions (Continued)

Key Description

Application These keys can be assigned to an application.

and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window. To get these keys to an application, call GXOpenInput() at the beginning of the application and call GXCloseInput() at the end of the application. This redirects all of the key ev ent s to a n applicat ion, i ncluding the

and F7 keys.

Note:

Other applications cannot receive any key event until GXCloseInput() is called. For example, if the customer is using the APP1 key to run Calc.exe, this is disabled during this period.

Function (blue) Press and release the blue function key to activate the keypad alternate functions

LED

(shown on the keypad in blue). The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of

the screen on Windows Mobile 5.0 devices. Press and release the blue function key again to return to the normal keypad functions.

Control Press and release the CTRL key to activate the keypad alternate CTRL functions.

LED

The LED above the key lights and the icon appears on the taskbar on WinCE devices or the icon appears at the bottom of the screen on Windows Mobile 5.0

devices. Press the Blue key followed by the CTRL key to activate the keypad alternate ALT

functions. The icon appears on the taskbar on WinCE devices or the icon

ALT

appears at the bottom of the screen on Windows Mobile 5.0 devices.

Shift Press and release the SHIFT key to activate the keypad alternate SHIFT functions.

Period/Decimal Point Produces a period for alpha entries and decimal point for numeric entries.

2 - 46 MC909X User Guide

Table 2-13

Star Produces an asterisk.

Enter Executes a selected item or function.

VT Emulator Descriptions (Continued)

Key Description

For Windows Mobile 5.0:

The default behavior of the RETURN key sends an extra character, which causes a Microsoft Word or Notes application to exit. To make the applications work properly, create an XML Provisioning file with the following entries:

Characteristic type =”HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD”

Para name = “SpecialEnterTabKey” value = 0

Refer to the MC909X Integrator Guide for instruction on updating the registry using XML Provisioning.

Operating the MC909X 2 - 47

Keypad Special Functions

The keypad special functions are color coded on the keypads. For example, on the 53-key keyp ad, the display backlight icon is blue indicating that the blue function key must be selected first to acc ess the dis play backli ght. On the 43-key keypad, the display backlight icon is white indicating that the display backlight is the default value for that key.

Table 2-14

Icon

Keypad Special Functions

28-Key

Keypad

Blue key +

Blue key

Blue key +

33-Key

Keypad

Blue key + 7Blue key +

Blue key + 4Blue key +

Blue key + 8Blue key +

Blue key + 5Blue key +

Blue key + 9Blue key +

38-Key

Alpha/Shifted

Numeric

Keypad

38-Key

Numeric/

Function

Keypad

key key

Blue key + F1Blue key + F1Blue key + DMonochrome units:

Blue key + F5Blue key + F5Blue key + IMonochrome units:

Blue key + F4Blue key + F4Blue key + HIncreases scan

43-Key

Keypad

53-Key, 3270, 5250, VT Keypad

Blue key +

Special Function

Turns on and off the display backlight.

Turns on and off the keypad backlight.

Increases display contrast.

Color units: Increases display backlight intensity.

Decreases display contrast.

Color units: Increases display backlight intensity.

decode beeper volume.

Blue key +

Blue key

CTRL

Not available

NOTE Use of display and keypad backlighting can significantly reduce battery life. Mobile computers with color

Blue key + 6Blue key +

Blue key +

CTRL

Not available

screens do not have contrast settings.

Blue key +

Blue key + F8Blue key + F8Blue key + MDecreases scan

decode beeper volume.

Blue key +

CTRL

Not available Not available Not

Blue key +

CTRL

Blue key +

CTRL

available

Enables Alt keypad functions.

Sends TAB character (forward tab).

2 - 48 MC909X User Guide

Entering Data

When entering data on the keypad, use either the single-hand method or the two-hand method as shown in

Figure 2-26.

Single-hand Method

Figure 2-26

Entering Data on the Keypad

Using the Power Button

Press the red Power button to turn the mobile computer screen on and off (suspend mode). The mobile computer is on when the screen is on and the mobile computer is in su spend mode whe n the screen is o ff. For more information, see Starting the Mobile Computer on page 1-9.

The Power button is also used to reset the mobile computer by performing a warm or cold boot.

•

On Windows CE 5.0

- Warm Boot (Soft Reset) - Resets the mobile computer.

- Cold Boot (Hard Reset) - Resets the mobile computer, removes all added applications and restores all

factory default settings.

Two-hand Method

•

On Windows Mobile 5.0

- Warm Boot (Soft Reset) - Resets the mobile computer. Operating system and all applications are

restarted. File storage is preserved.

- Cold Boot (Hard Reset) - Resets the mobile computer Operating system and all applications are

restarted. File storage is preserved. Real-Time Clock (RTC) is reset. Normally only used when a Warm Boot does not initiate.

NOTE Applications that are added to the Application folder are not removed when a cold boot is performed. The

Application folder is in flash memory.

For information about booting the mobile computer, see Windows Mobile 5.0 Devices on page 2-54.

Using a Wired Headset

You can use a stereo headset for audio communication when an audio enabled application is used. To use a headset, plug the headset jack into the audio connector on the side of the mobile computer. Ensure that the mobile computer’s volume is set appropriately before putting the headset on. When a headset is plugged into the jack, the speakerphone is muted.

Operating the MC909X 2 - 49

For WWAN-enabled mobile computers, Symbol recommends a 2.5mm jack headset, p/n 50-11300-050.

NOTE The MC9094 and MC9097 does not support headsets with buttons used to answer or hang-up a call. Use

the green dot or red dot keys on the keypad.

Figure 2-27

Using a Headset (MC9090-G Shown)

2 - 50 MC909X User Guide

Using a Bluetooth Headset

You can use a Bluetooth headset for audio communication when an aud io en ab le d ap plic at ion is used . S ee

Chapter 3, Using Bluetooth for information on connecting a Bluetooth device to the mobile computer. Ensure

that the mobile computer’s volume is set appropriately before putting the headset on. When a Bluetooth headset is connected the speakerphone is muted.

NOTE The MC9094 and MC9097 does not support headsets with buttons used to answer or hang-up a call. Use

the green dot or red dot keys on the keypad. If the mobile computer goes into suspend mode the Bluetooth connection is disabled and the mobile

computer automatically switches to speakerphone mode.

Data Capture

Mobile computers with an integrated laser scanne r allow you to collect data by scanning one dimensional bar codes.

Mobile computers with an integrated imager allow you to collect data by decoding one dimensional bar codes (including RSS) and two dimensional bar codes (including PDF417 and DataMatrix), and capture and download images to a host for a variety of imaging applications.

Laser Scanning

Mobile computers with an integrated laser scanner have the following features:

•

Reading of a variety of bar code symbologies, including the most popular linear, postal, and 1-D code types.

•

Advanced intuitive laser aiming for easy point-and-shoot operation.

Imaging

Mobile computers with an integrated imager have the following features:

•

Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal, PDF417 and 2-D matrix code types.

•

The ability to capture and download images to a host for a variety of imaging applications.

•

Advanced intuitive laser aiming for easy point-and-shoot operation.

The imager uses digital camera technology to take a digit al picture of a bar code, stores the resulting image in its memory and executes state-of-the-art software decoding algorithms to extract the data from the image.

Aiming the Imager

The mobile computer’s integrated imager projects a lase r aiming p attern (field of view) simila r to those used on cameras. The aiming pattern is used to position the bar code or object within the field of view.

Operating the MC909X 2 - 51

Figure 2-28

Laser Aiming Pattern (Field of View)

Operational Modes

Mobile computers with an integrated imager have three modes of operation: Decode Mode, Pick List Mode and Image Capture Mode. All modes are activated by pulling the trigger or pressing the Scan button.

Decode Mode

This mode allows the user to decode a bar code when a single bar code in the mo bile co mputer’s field of vie w. In this mode the Imager attempts to locate and decode enabled bar codes within its field of view. The Imager remains in this mode as long as the trigger is pulled, or until a bar code is decoded.

Pick List Mode

Pick List mode allows the user to selectively decode a bar code when more than one bar code is in the m obile computer’s field of view. By moving the aiming crosshair over the wanted bar code the user can selectively read only the required bar code. This feature is particularly valued for pick lists containing multiple bar codes and manufacturing or transport labels containing more than one bar code type (either 1D or 2D).

Image Capture Mode

This mode allows the user to capture an image within the mob ile computer’s field of view. The user can use the mobile computer to capture signatures or images of items like damaged boxes.

Scanning Considerations

Typically, scanning is a simple matter of aim, scan/decode and a few quick trial efforts master it. However, two important considerations can be used to optimize any scanning performance:

•

Range

Any scanning device decodes well over a particular working range — minimum and maximum distances from the bar code. This range varies according to bar code density and scanning device optics.

Scanning within range brings quick and constant decodes; scanning too close or too far away prevents decodes. Move the scanner closer and further away to find the right working r ange for the bar code s being scanned. However, the situation is complicated by the availability of various integrated scanning modules. The best way to specify the appropriate working range per bar code density is through a chart called a decode zone for each scan module. A decode zone simply plots working range as a function of minimum element widths of bar code symbols.

•

Angle

Scanning angle is important for promoting quick de codes. When laser beams reflect directly back into the scanner from the bar code, this specular reflection can “blind” the scanner.

To avoid this, scan the bar code so that the beam does not bounce directly back. But don’t scan at too sharp an angle; the scanner needs to collect scattered reflections from the scan to make a successful decode. Practice quickly shows what tolerances to work within.

2 - 52 MC909X User Guide

NOTE Contact the Symbol Support Center if chronic scanning difficulties develop. Decoding of properly printed

bar codes should be quick and effortless.

Scanning Bar Codes

1. Ensure that a scan enabled application is loaded on the mobile computer.

2. Aim the scan exit window at the bar code.

3. Pull the trigger.

•

For mobile computers with a laser scanner, ensure the red scan beam covers the entire bar code. The red scan LED lights to indicate that the laser is on. The green scan LED lights and an audible beep sounds, by default, to indicate the bar code was decoded successfully.

Figure 2-29

•

For mobile computers with an imager, place the bar code in any orientation within the aiming pattern. Ensure the entire symbol is within the rectangular area formed by the brackets in the aiming pattern. The red laser aiming pattern turns on to assist in aiming. If necessary, the mobile computer turns on its red LED to illuminate the target bar code. The green scan LED lights and an audible beep sounds, by default, to indicate the bar code was decoded successfully. Note that when the mobile computer is in Pick List Mode, the bar code is not decoded until the crosshair is touching the bar code.

Linear bar code

Figure 2-30

Laser Scanner Aiming Pattern

PDF417 symbol

Symbol

View Finder

(Aiming Pattern)

Bar Code Centered in Aiming Pattern

Figure 2-31

Bar Code Not Centered in Aiming Pattern

Operating the MC909X 2 - 53

Figure 2-32

4. Release the trigger .

Pick List Mode with Multiple Bar Codes in Aiming Pattern

NOTE Imager decoding usually occurs instantaneously. The mobile computer repeats the steps required to take

a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled.

Scanning Tips

Optimal scanning distance varies with bar code density and scanner optics.

•

Hold the scanner farther away for larger symbols.

•

Move the scanner closer for symbols with bars that are close together.

NOTE Scanning procedures depend on the application and mobile computer configuration. An application may

use different scanning procedures from the one listed above.

Scan LED Indicator

The Indicator LED bar on the mobile computer provides a visual indication of the scan status.

Table 2-15

Scan LED Indicators

LED Status Indication

Off Not scanning. Solid Red Laser enabled, scanning/imaging in process. Solid Green Successful decode.

Resetting the Mobile Computer

Windows CE 5.0 Devices

There are two reset functions, warm boot and cold boot. A warm boot restarts the mobile computer by closing all running programs.

A cold boot also restarts the mobile comp uter, but erases all stored records and entries in RAM. Data saved in flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the factory default settings.

Perform a warm boot first. This restarts the mobile computer and saves all stored records and entries. If the mobile computer still does not respond, perform a cold boot.

2 - 54 MC909X User Guide

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soon as the mobile computer starts to perform a warm boot release the Power button.

Performing a Cold Boot

A cold boot restarts the mobile computer and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card. Never perform a cold boot unless a warm

boot does not solve the problem.

CAUTION Do not hold down any key, other than the Power button during a reset. Performing a cold boot

restores formats, preferences and other settings to the default settings.

NOTE Any data previously synchronized with a computer can be restored during the next ActiveSync operation.

To perform a cold boot:

1. Press the primary battery release on the mobile computer to partially eject the battery from the mobile

computer.

2. While the battery is partially released, simultaneously press and release the handle trig ger and th e Power

button.

3. Push the battery to fully re-insert it in the mobile comp uter. One audible click can be heard as the battery is

fully inserted.

4. The mobile computer initializes.

5. Calibrate the screen. See Calibrating the Screen on page 1-10 to calibrate the mobile computer screen.

Windows Mobile 5.0 Devices

There are two reset functions, warm boot and cold boot.

•

A warm boot restarts the mobile computer and closes all running programs.

•

A cold boot also restarts the mobile computer and closes all running programs but also resets the Real-Time-Clock (RTC).

Data saved in flash memory or a memory card is not lost. Perform a warm boot first. This restarts the mobile computer and saves all stored records and entries. If the mobile computer still does not respond, perform a cold boot.

Performing a Warm Boot

Hold down the Power button for approximately five seconds. As soo n as the mobile computer st art s to perform a warm boot release the Power button.

Performing a Cold Boot

A cold boot restarts the mobile compu ter. The operating system and all applications are restarted. File storage is preserved. The Real-Time-Clock (RTC) resets. Only perform a cold boot if a warm boot does not solve the

problem.

Operating the MC909X 2 - 55

To perform a cold boot:

1. Press the primary battery release on the mobile computer to partially eject the battery from the mobile

computer.

2. On an MC9090-G, while the battery is partially released, simultaneously press and release the trigger and

the Power button.

3. On an MC-909X-K or MC909X-S, while the battery is partially released, simultaneously press and release

the left scan button and the Power button.

4. Push the battery to fully re-insert it in the mobile computer . One audible click can be heard as the battery is

fully inserted.

5. The mobile computer initializes.

Waking the Mobile Computer

The wakeup conditions define what actions wakeup the mobile computer. These settings are configurable and the factory default settings shown in Table 2-16 are subject to change/update.

Table 2-16

Status Description Conditions for Wakeup

Power Off When the mobile computer is set to the suspend

Wakeup Conditions (Default Settings)

mode by pressing

Power

, these actions wake the

mobile computer.

Power

button is pressed.

2. AC power added or removed.

3. Cradle/cable connect or disconnect. Key or scan button is pressed. Real Time Clock set to wake up. Incoming phone call (MC9094 and

MC9097 only)

Auto Off When the mobile computer goes into suspend

mode by an automatic power-off function, these actions wake the mobile computer.

Power

button is pressed.

2. AC power added or removed.

3. Cradle/cable connect or disconnect. Key or scan button is pressed. Real Time Clock set to wake up. Incoming phone call (MC9094 and

MC9097 only).

2 - 56 MC909X User Guide

Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624 MHz, MC9090-K, MC9090-S, MC9090-G, MC9094-K User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Patents

Revision History

Table of Contents

About This Guide

Introduction

Documentation Set

Configurations

Software Versions

Chapter Descriptions

Notational Conventions

Related Documents and Software

Service Information

Getting Started

Introduction

Unpacking the Mobile Computer

Accessories

Getting Started

Installing and Removing the Main Battery

Installing the Main Battery

Charging the Battery

Charging the Main Battery and Memory Backup Battery

Charging Spare Batteries

Removing the Main Battery

Starting the Mobile Computer

Calibrating the Screen

Checking Battery Status

SIM Card

Stylus

MC9090-G Strap

MC909X-K Strap

MC909X-S Strap

Battery Management

Battery Saving Tips

Changing the Power Settings

Changing the Display Backlight Settings

Changing the Keypad Backlight Settings

Turning Off the Radios

On Devices with Mobile 5.0 AKU 1.0

Turning Off the WLAN Radio

Bluetooth and WWAN Radios

On Devices with Mobile 5.0 AKU 2.2 and higher

On Device with CE 5.0 (OEM Version 01.15 and lower)

WLAN Radio

Bluetooth Radio

On Device with CE 5.0 (OEM Version 01.16 and higher)

WLAN Radio

Bluetooth Radio

Operating the MC909X

Introduction

Status Icons (Windows CE 5.0)

Status Icons (Windows Mobile 5.0)

Status Bar

Command Bar

Speaker Icon

Battery Icon

Connectivity Icon

Time Icon

Instant Message Icon

E-Mail Icon

Multiple Notification Icon

Locking the Mobile Computer (Windows Mobile 5.0 Only)

LED Indicators

Keypads

28-Key Keypad for MC909X-G/K

28-Key Keypad for MC909X-S

33-Key Numeric/Function Keypad for MC909X-K

38-Key Numeric/Function Keypad for MC909X-S

38-Key Alpha/Shifted Numeric Keypad for MC909X-S

43-Key Keypad for MC909X-G/K

53-Key Keypad for MC909X-G/K

3270 Emulator Keypad for MC909X-G/K

5250 Emulator Keypad for MC909X-G/K

VT Emulator Keypad

Keypad Special Functions

Entering Data

Using the Power Button