Motorola Focus TAG Quick Start Manual

QUICK START GUIDE

Focus TAG

Works with FOCUS86 Wi-Fi® Home Video Camera

The features described in this guide are subject to modifications without
prior notice.

Thank you for purchasing your new Motorola Focus TAG.
Focus TAG is a BLE device that works as a motion sensor and a presence

detector. It is designed as an external sensor for FOCUS86 Wi-Fi

®

Home

Video Camera.
Please keep your original dated sales receipt for your records. Registration

is not required for warranty coverage.
For product related questions, please call:

We recommend you to visit our website www.motorolahome.com/
support to get the latest User Guide. The User Guide contains General
Information and detailed Warranty Information.

1. Overview of Focus TAG

[phone] (UK only)*

(*Calls cost 7ppm + your phone company's access charge.)

[phone] (ROI)

On the Web: www.motorolahome.com/support

PAIR button • Press and hold for 5 seconds to pair Focus TAG

with your Android™ or iOS device.

LED light • Flashes in blue when Focus TAG is in

registration mode.

LED light

PAIR button

2. Install Battery

1. Slip the supplied opener into the slot on the back of Focus TAG.

2. Gently twist the opener to pop open the cover. Once the cover starts
to open, work your way carefully around the cover until it pops off.

3. Insert the battery (model: CR2032) with positive pole (+) facing
upwards into the battery compartment.

4. Position the back cover over the battery compartment and press down
around the edges until you hear it click into its place.

5. Focus TAG powers on automatically when the battery is installed
correctly.

3. Power On

Focus TAG powers on automatically when the battery is installed correctly.

back cover

4. Install Hubble for Motorola Monitors App

5. Add Focus TAG as a Motion Sensor or Presence Detector

1. Run Hubble for Motorola Monitors App on your Android™ or iOS
device.

2. Press and hold the PAIR button on Focus TAG for 5 seconds to begin
pairing it with your Android™ or iOS device. (see 2. Overview of
Focus TAG for the location of the PAIR button)

3. Select your FOCUS86 Camera.

4. Follow the in-app instructions to set up Focus TAG as a motion sensor
or presence detector.

Download the Hubble for Motorola Monitors App from
the App Store for iOS devices or from the Google Play

TM

Store for Android

TM

devices.

Manufactured, distributed or sold by Binatone Electronics International LTD., official
licensee for this product. MOTOROLA and the Stylised M logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC. and are used under license.
Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome
are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. All other
trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All
rights reserved.

Printed in China

UK_EN Version 3.0