Motorola CLS1110 - CLS 1110 UHF, CLS1410 User Manual

Download

SERIES TWO-WAY RADIO

User's Guide

6864110w15o.book Page 1 Wednesday, March 19, 2003 6:17 PM

6864110w15o.book Page 2 Wednesday, March 19, 2003 6:17 PM

Contents

Introduction....................................2

FCC Licensing Information.......... 4

Safety and General Information .. 6

Radio Controls........................... ..13

Getting Started.............................14

Installing the Swivel Belt

Holster ....................................14

Installing the Batteries................15

Programming Mode.....................26

Factory Default Settings.............27

Entering Programming Mode.....28

Cloning Radio Settings...............32

Advanced Features......................33

Troubleshooting .........................35

Use and Care............ ... ... ... .... ... ....38

Frequencies and Bandwidths . ....39

6864110w15oTOC.fm Page 1 Wednesday, March 19, 2003 6:32 PM

Introduction

Thank you for purchasing a Motorola _Series Radio. Your radio is a product of Motorola’s 70 plus years of experience as a world leader in designing and manufacturing communications equipment. The _Series radios provide costeffective communications for businesses such as retail stores, restaurants, hotels, and schools. Motorola professional two-way radios are the perfect communications solution for all of today’s fast-paced industries. Please read this guide carefully so you know how to properly operate the radio

6864110w15o.book Page 2 Wednesday, March 19, 2003 6:17 PM

For product-related questions, please call:

1-800-448-6686 in the USA

1-888-390-6456 TTY (Text Telephone)

On the Web:

www.motorola.com/radios/professional

6864110w15o.book Page 3 Wednesday, March 19, 2003 6:17 PM

FCC Licensing Information

Series professional two-way radios operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC.

Application is made available on FCC Forms 601, schedules D and H, and remittance form 159. If ordering the forms by mail, phone, or from the FCC website, please request document number

000601

, which includes all

forms and instructions. If using the FCC Fax-on-Demand system, use the 7-digit order numbers listed below.

6864110w15o.book Page 4 Wednesday, March 19, 2003 6:17 PM

be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules.

Note:

Use of this radio outside the country where it was intended to be distributed is subject to government

regulations and may be prohibited.

6864110w15o.book Page 5 Wednesday, March 19, 2003 6:17 PM

Safety and General Information

Important Information on Safe and Efficient Operation. Read This Information Before Using Your Radio.

The information provided in this document supersedes the general safety information contained in user guides published prior to December 1, 2002.

Transmit and Receive Procedure

6864110w15o.book Page 6 Wednesday, March 19, 2003 6:17 PM

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition

• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998

• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999

• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2001 (applicable to wireless phones only)

• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2002) “additional requirements for SMR,

6864110w15o.book Page 7 Wednesday, March 19, 2003 6:17 PM

Body-Worn Operation

To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in

a Motorola-supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the radio held in the normal use position,

ensure the radio and its antenna are at least 1 inch

(2.5 cm) from your body when transmitting

6864110w15o.book Page 8 Wednesday, March 19, 2003 6:17 PM

Aircraft

When instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.

Medical Devices - Pacemakers

The Advanced Medical Technology Association recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio and a pacemaker. These recommendations are consistent with the independent research by, and recommendations of the U.S. Food and Drug Administration.

6864110w15o.book Page 9 Wednesday, March 19, 2003 6:17 PM

Safety and General Use While Driving

Check the laws and regulations on the use of radios in the area where you drive. Always obey them. When using your radio while driving, please:

• Give full attention to driving and to the road.

• Use hands-free operation, if available.

• Pull off the road and park before making or answering a call if driving conditions so require.

Operational Warnings

6864110w15o.book Page 10 Wednesday, March 19, 2003 6:17 PM

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.

Operational Cautions

Antennas Do not use any portable radio that has a damaged antenna.

If a damaged antenna comes into contact with

your skin, a minor burn can result.

6864110w15o.book Page 11 Wednesday, March 19, 2003 6:17 PM

4. To reduce the risk of damage to the cord or plug, pull the plug rather than the cord when disconnecting the

charger from the AC receptacle.

5. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance

or cleaning.

6. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or

personal injury.

7. Make sure the cord is located so it will not be stepped on, tripped over, or subjected to damage or stress.

6864110w15o.book Page 12 Wednesday, March 19, 2003 6:17 PM

Radio Controls

Use P to:

Turn radio on/off

Adjust radio volume

Microphone

6864110w15o.book Page 13 Wednesday, March 19, 2003 6:17 PM

Getting Started

Installing the Swivel Belt Holster

1. Slide the bottom of the radio into the holster until it snaps

into place.

2. To remove, push the tab on the holster and pull the radio

away from the holster.

Note: In case of loss, please contact your point-of-sale or

6864110w15o.book Page 14 Wednesday, March 19, 2003 6:17 PM

Installing the Batteries

Your radio uses a rechargeable Lithium Ion (Li Ion) battery or 3 AAA alkaline batteries with the 56564 AAA Battery Tray (not included with all models).

Li Ion Battery

1. If the battery door is already in place, push down on the recess on the door and slide it off the radio.

2. Insert the battery, printed arrows first, into the battery

6864110w15o.book Page 15 Wednesday, March 19, 2003 6:17 PM

Charging the Battery

Use only the charger supplied with the radio, or other _Series power accessories. For optimum battery life, do not charge the battery for prolonged periods after it is fully charged. Charging the battery over the weekend is acceptable.

Using the Drop-in Charger

1. Place the charger on a flat surface.

2. Insert the plug of the power cord into the jack

6864110w15o.book Page 16 Wednesday, March 19, 2003 6:17 PM

Using the 56531 Multi-Unit Charger

The Multi-Unit Charger (MUC) allows drop-in charging of up to 6 radios or batteries. Batteries can be charged inside the radios or removed and placed in the MUC separately. Each of the 6 charging pockets can hold a radio or battery, but not both.

1. Place the charger on a flat surface.

2. Insert the power cord plug into the jack on the MUC.

3. Plug the cord into an AC outlet.

6864110w15o.book Page 17 Wednesday, March 19, 2003 6:17 PM

Charging Status LEDs

On the drop-in charger, the radio and battery charging pockets have their own LEDs. On the MUC, each of the 6 charging pockets has an LED. The LEDs are grouped into

pairs to show which charging pockets are paired (for cloning, see page 32). The LED is solid red when the battery is charging, and solid green when charging is

complete.

Battery Meter

6864110w15o.book Page 18 Wednesday, March 19, 2003 6:17 PM

Turning Your Radio On and Off

See page 13 for a basic radio diagram.

Turn P clockwise to turn the radio on, and counterclockwise to turn the radio off.

When the radio is on, the transmit light on the top of the radio flashes every 3 seconds.

When you turn the radio on, the radio chirps and the display briefly shows all features and display segments.

6864110w15o.book Page 19 Wednesday, March 19, 2003 6:17 PM

Adjusting the Volume

Turn P clockwise to increase the volume, and counterclockwise to decrease the

volume.

Note: Do not hold the radio too close to your ear when adjusting the volume.

Reading the Display

6864110w15o.book Page 20 Wednesday, March 19, 2003 6:17 PM

Talking and Receiving

Basic Radio Operation

1. Press and hold

T to check for channel activity. If you hear static, the channel is

clear to use. Do not transmit if someone is speaking on the channel. Press

again to stop monitoring.

2. To talk, press and hold

Push to Talk

and speak into the microphone. Hold the

radio 2 to 3 inches away from your mouth.

6864110w15o.book Page 21 Wednesday, March 19, 2003 6:17 PM

Talk Range

Industrial Multi-Level Outdoor

Inside steel/concrete

industrial buildings

Inside multi-level

buildings

Flat ground with no

obstructions

Up to 200,000 sq. ft. Up to 15 floors Up to 5 miles

6864110w15o.book Page 22 Wednesday, March 19, 2003 6:17 PM

6. To transmit, speak into the accessory microphone. To receive, stop talking.

To disable VOX operation, press

Push to Talk

or remove the audio accessory.

Note: To order accessories, visit www.motorola.com/radios/professional, call 1-800-448-6686, or contact your point of purchase.

Setting the

VOX Sensitivity

You can adjust the sensitivity of your radio’s accessory or microphone during VOX operation to suit different operating environments. These menus appear only when

6864110w15o.book Page 23 Wednesday, March 19, 2003 6:17 PM

Monitoring a Channel

Monitoring allows you to check for activity on a channel.

1. Press and hold

T. If the channel is clear to use, you will hear

static and w and 0 will display.

2. Press

T again to stop monitoring.

Scanning (CLS1410 Only)

You can scan up to 4 channels and frequencies. When the radio

6864110w15o.book Page 24 Wednesday, March 19, 2003 6:17 PM

Skipping and Removing Channels While Scanning

Scan has two temporary features to make it easier to use.

• Scan advance If the radio stops scanning on a channel you do not want to listen to, press ] to

resume scanning for the next active channel.

• Nuisance delete Press and hold [ to temporarily remove a channel from the scan list. The

6864110w15o.book Page 25 Wednesday, March 19, 2003 6:17 PM

Programming Mode

Programming mode allows you to change the following settings on your radio:

• Channel

• Frequency

• Interference eliminator code

• Call tones

• Microphone gain

6864110w15o.book Page 26 Wednesday, March 19, 2003 6:17 PM

Factory Default Settings

Your radio is programmed at the factory to the following settings:

Frequency

Channel

CLS1110 CLS1410

1 22

6864110w15o.book Page 27 Wednesday, March 19, 2003 6:17 PM

Entering Programming Mode

Press and hold

Push to Talk

and T for 3 seconds while turning the radio on. The

radio beeps and displays k, the channel number flashes, and the frequency (indicated by l) and code (indicated by y) display alternately.

Note: If you press and release the

Push to Talk

button when programming

CSL1410 models, you will return to the front of the Programming Mode.

Selecting a Channel (CLS1410 Only)

6864110w15o.book Page 28 Wednesday, March 19, 2003 6:17 PM

Programming the Interference Eliminator Code

The interference eliminator code helps minimize interference by providing code combinations that filter out static, noise, and unwanted messages.

1. In programming mode, press

S until y displays and the code

number flashes.

2. Press [ or ] to select the code (see page 42).

3. Press and hold

Push to Talk

to exit programming mode, or press

6864110w15o.book Page 29 Wednesday, March 19, 2003 6:17 PM

Programming Call Tones and VibraCall® (CLS1410 only)

Your radio can transmit call tones to other radios in your group so you can alert them that you are about to talk. Your radio is programmed at the factory with call tones

turned off (set to 0), but you can change this setting to choose a distinctive call tone.

The VibraCall

feature is an additional call tone option that makes the CLS1410 radio vibrate briefly when it receives if you have not transmitted or received in the last 30 seconds. Select call tone 4 to turn VibraCall

on. i displays on the radio when

6864110w15o.book Page 30 Wednesday, March 19, 2003 6:17 PM

Programming Microphone Gain

You can adjust the microphone sensitivity to suit different users or operating environments.

1. In programming mode, press

until g and ? display.

2. Press [ or ] to select the sensitivity level:

3 = High sensitivity, for quiet environments 2 = Medium sensitivity (default)

6864110w15o.book Page 31 Wednesday, March 19, 2003 6:17 PM

Cloning Radio Settings

You can copy _ Series radio settings from one radio (the source) to a second

radio using the 56531 Multi-Unit Charger (MUC) optional accessory. See the MUC User's Guide for more information.

You can clone only one radio at a time. A multi-channel radio can clone to a singlechannel radio, but only the first channel is cloned. The MUC does not have to be plugged in for cloning, but both radios require charged batteries.

6864110w15o.book Page 32 Wednesday, March 19, 2003 6:17 PM

Advanced Features

You can set the following features by pressing and holding additional buttons while turning the radio on.

To Do This

Press This Button

While Turning

the Radio On

Default Setting

6864110w15o.book Page 33 Wednesday, March 19, 2003 6:17 PM

Turn Battery Save Mode On/Off Decreases attack time, which is the brief period of

time between when the radio receives a transmission on its frequency and broadcasts audio.

Push to Talk

T [

To Do This

Press This Button

While Turning

the Radio On

Default Setting

6864110w15o.book Page 34 Wednesday, March 19, 2003 6:17 PM

Troubleshooting

Symptom Try This:

No Power

Recharge or replace Li Ion battery. Reposition or replace Alkaline batteries.

Make sure

Push to Talk

is completely pressed while

6864110w15o.book Page 35 Wednesday, March 19, 2003 6:17 PM

Limited talk range

Steel and/or concrete structures, heavy foliage, buildings, or vehicles decrease range (see page 22). Check for clear line of sight to improve range.

Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio.

Symptom Try This:

6864110w15o.book Page 36 Wednesday, March 19, 2003 6:17 PM

Charger light does not come on

Reinsert radio and/or battery. Clean battery and/or charger contacts. Verify that the charging pin on the transformer is inserted

correctly into the drop-in charger. AAA cells installed in radio. Remove and replace with Li Ion

Symptom Try This:

6864110w15o.book Page 37 Wednesday, March 19, 2003 6:17 PM

Use and Care

XXX

6864110w15o.book Page 38 Wednesday, March 19, 2003 6:17 PM

Frequencies and Bandwidths

These charts provide frequency information and are useful when using Motorola _ Series radios with other business radios. Frequency Display Number is identical to Spirit M, GT, and S-Series frequency position (where applicable), but bandwidth may be different.

UHF Frequencies

6864110w15o.book Page 39 Wednesday, March 19, 2003 6:17 PM

15 461.1875 12.5 26 462.8375 12.5

16 461.2125 12.5

27 462.8625 12.5

UHF Frequencies (Continued)

Display

Number

Frequency

(MHz)

Bandwidth

Display

Number

Frequency

(MHz)

Bandwidth

6864110w15o.book Page 40 Wednesday, March 19, 2003 6:17 PM

37 466.1125 12.5 47 466.3625 12.5

38 466.1375 12.5

48 467.7875 12.5

UHF Frequencies (Continued)

Display

Number

Frequency

(MHz)

Bandwidth

Display

Number

Frequency

(MHz)

Bandwidth

6864110w15o.book Page 41 Wednesday, March 19, 2003 6:17 PM

Interference Eliminator Codes

Display

Number

Code

(Hz)

Display

Number

Code

(Hz)

Display

Number

Code

(Hz)

1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 3 74.4 16 114.8 29 179.9

6864110w15o.book Page 42 Wednesday, March 19, 2003 6:17 PM

Digital Interference Eliminator Codes

Display

Number

Digital

Code

Display

Number

Digital

Code

Display

Number

Digital

Code

39 023 54 115 69 223 40 025 55 116 70 226 41 026 56 125 71 243

6864110w15o.book Page 43 Wednesday, March 19, 2003 6:17 PM

84 346 97 465 110 632 85 351 98 466 111 654 86 364 99 503 112 662

Digital Interference Eliminator Codes (Continued)

Display

Number

Digital

Code

Display

Number

Digital

Code

Display

Number

Digital

Code

6864110w15o.book Page 44 Wednesday, March 19, 2003 6:17 PM

Spirit GT Series Programming

The _Series platform is designed to replace the Spirit GT Series radio. The first eight frequencies and 38 interference eliminator codes of _ Series are compatible with Spirit GT Series. To program your _Series radio to talk with a

Spirit GT Series, verify or change your Spirit GT settings as follows. To verify the frequency and code:

1. Press the Menu button 3 times. The channel number and frequency display.

6864110w15o.book Page 45 Wednesday, March 19, 2003 6:17 PM

Limited Warranty for Motorola Personal Communications Products Purchased in the United States and Canada

Warranty

I. What This Warranty Covers

• Products.

Defects in materials and workmanship in wireless cellular telephones, pagers, and/or two-way radios, and certain accessories that are sold with them, such as the battery, battery charger, and holster manufactured and/or sold by Motorola (Products).

6864110w15o.book Page 46 Wednesday, March 19, 2003 6:17 PM

III. Who is Covered

This warranty extends to the first end-user purchaser only.

IV. What We Will Do to Correct Warranty Problems

At no charge to you, we have the option to repair or replace the Products or software that do not conform to the warranty, or to refund the Products’ purchase price. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products or parts. No software updates are provided.

6864110w15o.book Page 47 Wednesday, March 19, 2003 6:17 PM

You will receive instructions on how to ship the Products to Motorola. You must ship the Products to us with freight, duties and insurance prepaid. Along with the Products you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider (if this Product requires subscription service); (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. If requested, you must also return all detachable parts such as antennas, batteries and chargers. RETAIN YOUR ORIGINAL PROOF OF PURCHASE.

We will ship repaired or replacement Products at our expense for the freight and insurance, but at

6864110w15o.book Page 48 Wednesday, March 19, 2003 6:17 PM

•

Rechargeable batteries that: (a) are charged by other than the Motorola-approved battery charger specified for charging such batteries; (b) have any broken seals or show evidence of tampering; (c) are used in equipment other than the Product for which they are specified; or (d) are charged and stored at temperatures greater than 60 degrees centigrade. Any of these voids the warranty.

•

Products that have: (a) serial numbers or date tags that have been removed, altered, or obliterated; (b) board serial numbers that do not match each other, or board serial numbers that do not match the housing; or (c) nonconforming or non-Motorola housings or parts. Any

6864110w15o.book Page 49 Wednesday, March 19, 2003 6:17 PM

Flat-rate repair rates may apply to Products not covered by this warranty. To obtain information about Products needing repairs that are not covered by this warranty, please call the telephone number previously listed. We will provide information on repair availability, rates, methods of payment, where to send the Products, etc.

VII. Some Other Limitations

This is Motorola’s complete warranty for the Products, and states your exclusive remedies. This warranty is given in lieu of all other express warranties. Implied warranties, including

6864110w15o.book Page 50 Wednesday, March 19, 2003 6:17 PM

VIII. Patent and Software Provisions

At Motorola’s expense, we will defend you, and pay costs and damages that may be finally awarded against you, to the extent that a lawsuit is based on a claim that the Products directly infringe a United States patent. Our obligation is conditioned on: (a) you notifying us promptly in writing when you receive notice of the claim; (b) you giving us sole control of the defense of the suit and all negotiations for its settlement or compromise; and (c) should the Products become, or in Motorola's opinion be likely to become, the subject of a claim of infringement of a United States patent, you permit us, at our option and expense, either to: procure for you the right to continue using the

6864110w15o.book Page 51 Wednesday, March 19, 2003 6:17 PM

Laws in the United States and other countries preserve for Motorola and other third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to reproduce in copies and distribute copies of such software. The software may be copied into, used in and redistributed with only those Products that are associated with such software. No other use, including without limitation, disassembly or reverse engineering of such software or exercise of exclusive rights in such software is permitted.

Some states and other jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations

6864110w15o.book Page 52 Wednesday, March 19, 2003 6:17 PM