Motorola 89FT7078 Users Manual
LEX L10i/LEX L10ig
MISSION CRITICAL
HANDHELD
FCC REGULATORY
Motorola Solutions reserves the right to make changes to any product to improve
reliability, function, or design. Motorola Solutions does not assume any product liability
arising out of, or in connection with, the application or use of any product, circuit, or
application described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in which
Motorola Solutions products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Motorola Solutions products.
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorolasolutions.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’ s Technical or Systems
Support. If there is a problem with the equipment, they will contact the Motorola
Solutions Global Customer Support at: http://www.motorolasolutions.com/support. For
the latest version of this guide go to: http://supportcentral.motorolasolutiuons.com.
Motorola Solutions, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and
are used under license. All other trademarks are the property of their re sp ective
owners.
© 2016 Motorola Solutions, Inc. All Rights Reserved.
Regulatory Information
This device is approved under Motorola Solutions, Inc.
This guide applies to Model Number LEX L10i/LEX L10ig.
All Motorola Solutions devices are designed to be compliant with
rules and regulations in locations they are sold and will be labeled
as required.
Local language translations are available at the following website:
http://supportcentral.motorolasolutions.com.
Any changes or modifications to Motorola Solutions equipment, not
expressly approved by Motorola Solutions, could void the user's
authority to operate the equipment.
CAUTION Only use Motorola approved accessories,
battery packs and battery chargers.
Do NOT attempt to charge damp/wet handheld
device or batteries. All components must be dry
before connecting to an external power source.
Declared maximum operating temperature: 14°F
to 131°F (-10°C to +55°C).
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information or to
view End Product Listing, please visit https://www.bluetooth.org/tpg/
listings.cfm.
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the
device signifying that the radio(s) is/are approved for use in the US.
Operation of the device without regulatory approval is illegal.
Ad-Hoc Operation (5GHz Band)
Ad-Hoc operation is restricted in this device.
Frequency of Operation – FCC 5GHz Only
The UNII (Unlicensed National Information Infrastructure) band 2c
(5600-5650 MHz ) is not supported in this device.
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are
Channels 1 to 11. The range of channels is limited by firmware.
Health and Safety Recommendations
Ergonomic Recommendations
CAUTION In order to avoid or minimize the potential risk of
ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company's safety programs to prevent employee
injury.
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (including safety systems).
Check with the manufacturer or its representative regarding your
vehicle. Y ou should also consult the manufacturer of any equipment
that has been added to your vehicle.
An air bag inflates with great force. DO NOT place objects, including
either installed or portable wireless equipment, in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates, serious
injury could result.Position your device within easy reach. Be able to
access your device without removing your eyes from the road.Note:
Connection to an alert device that will cause a vehicle horn to sound
or lights to flash, on receipt of a call on public roads, is not permitted.
IMPORTANT: Before installing or using, check state and local laws
regarding windshield mounting and use of equipment.
For safe installation:
•
Do not put your phone in a location that obstructs the drivers
vision or interferes with the operation of the Vehicle.
•
Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a "to
do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full
attention to driving. Check the laws and regulations on the use of
wireless devices in the areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice
good common sense and remember the following tips:
1. Get to know your wireless device and any features such as speed
dial and redial. If available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if
necessary, suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when
you are not moving or before pulling into traffic. Try to plan calls
when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may
be distracting. Make people you are talking with aware you are
driving and suspend conversations that have the potential to
divert your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency
services, (9-1-1) or other local emergency number in the case of
fire, traffic accident or medical emergencies. Remember, it is a
free call on your wireless phone! The call can be made regardless
of any security codes and depending on a network, with or
without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If you
see an auto accident, crime in progress or other serious
emergency where lives are in danger, call the Emergency
Services, (9-1-1) or other local emergency number, as you would
want others to do for you.
8. Call roadside assistance or a special non-emergency wireless
assistance number when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special nonemergency wireless number.
“The wireless industry reminds you to use your device / phone
safely when driving”.
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage
of wireless devices.
Potentially Hazardous Atmospheres - Vehicles Use
You are remind ed of the need to observe restrictions on the use of
radio devices in fuel depots, chemical plants etc. and areas where
the air contains chemicals or particles (such as grain, dust, or metal
powders) and any other area where you would normally be advised
to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so
by airport or airline staff. If your device offers a 'flight mode' or similar
feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect
medical electrical equipment.
Wireless devices should be switched off wherever you are
requested to do so in hospitals, clinics or healthcare facilities. These
requests are designed to prevent possible interference with
sensitive medical equipment.
Medical Devices
Pacemakers, Defibrillators or other Implanted Medical Devices
Persons with pacemakers, Implantable cardioverter-defibrillators
(ICDs) or other active implant a bl e medical devices (AIMD) should:
•
Consult with their physicians regarding the potential risk of
interference from radio frequency transmitters, such as portable
(poorly shielded medical devices may be more susceptible to
interference).
•
Turn Handheld off immediately if they have any reason to suspect
that interference is taking place.
•
Do not carry LEX L10i/LEX L10ig in a chest pocket or near the
implantation site, and carry or use the radio on the opposite side
of their body from the implantable device to minimize the potential
for interference
Other Medical Devices
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately shielded
from RF energy. Your physician may be able to assist you in
obtaining this information.
Acoustic Safety
Exposure to loud noises from any source for extended periods of
time may temporarily or permanently affect your hearing. The louder
the volume, the less time is required before your hearing could be
affected. Hearing damage from loud noise is sometimes
undetectable at first and can have a cumulative effect.
To protect your hearing:
•
Use the lowest volume necessary to do your job.
•
Turn up the volume only if you are in noisy surroundings.
•
Turn down the volume before adding headset or earpiece.
•
Limit the amount of time you use headsets or earpieces at high
volume.
•
When using the radio without a headset or earpiece, do not place
the radio's speaker directly against your ear.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions
supplied.
MN002919A01-A— April 2016
1 2 3
Compliance with RF Exposure Standards
Your devi ce is designed and tested to comply with a number of
national standards and guidelines (listed below) for human exposure
to radio frequency electromagnetic energy.
This device complies with the IEEE (FCC) limits for general
population/uncontrolled environments.
Your Motorola device complies with the following RF energy
exposure standards and guidelines:
•
United States Federal Communications Commission (FCC),
Code of Federal Regulations; 47 CFR et seq. & FCC, OET
Bulletin 65
•
Institute of Electrical and Electronic Engineers (IEEE) C95.1
Phones (placed to ear or used with headset)
Use only Motorola tested and approved belt-clips, holsters, and
similar accessories to ensure FCC Compliance. The use of thirdparty belt-clips, holsters, and similar accessories may not comply
with FCC RF exposure compliance requirements, and should be
avoided. The FCC has granted an Equipment Authorization for
these model phones with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR information
on these model phones is on file with the FCC and can be found
under the Display Grant section of http://www.fcc.gov/oet/ea/fccid.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the
antenna used for this transmitter must not be co-located or
operating in conjunction with any other transmitter/antenna except
those already approved in this filing.
Handheld Devices
This device was tested for typical body-worn operation. Use only
Motorola tested and approved belt-clips, holsters, and similar
wearable accessories.
The device can be operated inside a holster worn attached to a
human body. If the device is used without a holster, maintain a
0.59 inch separation between the device and a human body.
Power Supply
Use ONLY a Motorola approved power supply with electrical ratings:
Output 5.0Vdc, min 1.2A, with a maximum ambient temperature of
at least 122°F (50°C). Use of alternative power supply will invalidate
any approvals given to this unit and may be dangerous.
Batteries
Battery Information
Only use Motorola approved batteries.
Motorola rechargeable battery packs are designed and constructed
to the highest standards within the industry.
However, there are limitations to how long a battery can operate or
be stored before needing replacement. Many factors affect the
actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible
deterioration in overall battery quality may occur. Store batteries at
half of full charge in a dry, cool place, removed from the equipment
to prevent loss of capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer, the charge
level should be verified at least once a year and charged to half of
full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Motorola batteries is 30 days,
regardless if the battery was purchased separately or included as
part of the handheld device or bar code scanner. For more
information on Motorola batteries, please visit: http:/
mysymbolcare.symbol.com/battery/batbasics1.html.
Battery Safety Guidelines
•
The area in which the units are charged should be clear of debris
and combustible materials or chemicals. Particular care should
be taken where the device is charged in a non commercial
environment.
•
Follow battery usage, storage, and charging guidelines found in
the user's guide.
•
Improper battery use may result in a fire, explosion, or other
hazard.
•
To charge the handheld device battery, the battery and charger
temperatures must be between +32°F and +104°F (0°C and
°C).
+40
•
Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact Motorola
support.
•
For devices that utilize a USB port as a charging source, the
device shall only be connected to products that bear the USB-IF
logo or have completed the USB-IF compliance program.
•
Do not disassemble or open, crush, bend or deform, puncture, or
shred.
•
Severe impact from dropping any battery-operated device on a
hard surface could cause the battery to overheat.
•
Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.
•
Do not modify or remanufacture, attempt to insert foreign objects
into the battery, immerse or expose to water or other liquids, or
expose to fire, explosion, or other hazard.
•
Do not leave or store the equipment in or near areas that might
get very hot, such as in a parked vehicle or near a radiator or
other heat source. Do not place battery into a microwave oven or
dryer.
•
Battery usage by children should be supervised.
•
Please follow local regulations to promptly dispose of used rechargeable batteries.
•
Do not dispose of batteries in fire.
•
Seek medical advice immediately if a battery has been
swallowed.
•
In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the
affected area with large amounts of water and seek medical
advice.
•
If you suspect damage to your equipment or battery, cont act
Motorola support to arrange for inspection.
Use with Hearing Aids
When some wireless devices are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and wireless devices
also vary in the amount of interference they generate. In the event of
interference you may want to consult your hearing aid supplier to
discuss solutions.
The wireless telephone industry has developed ratings for some of
their mobile phones, to assist hearing device users in finding phones
that may be compatible with their hearing devices. Not all phones
have been rated. Motorola devices that are rated have the rating
included on the Declaration of Conformity (DoC) at http://
www.motorolasolutions.com/doc.
The ratings are not guarantees. Results will vary depending on the
user's hearing device and hearing lo ss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out th e phone with your
hearing device is the best way to evaluate it for your personal
needs.
Radio Frequency Interference Requirements- FCC
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
The use of 5 GHz WLAN's, for use in the US, have the following
restrictions:
Notched Band 5.60 - 5.65 GHz
Software Support
Motorola Solutions wants to ensure that customers have the latest
entitled software at the time of device purchase in order to keep the
device operating at peak performance levels. To confirm that your
Motorola device has the latest entitled software available at the time
of purchase, visit http://www.motorolasolutions.com.
Check for the latest software from Support > Products, or search for
the device and select Support > Software Downloads.
If your device does not have the latest entitled software as of your
device purchase date, e-mail Motorola at
entitlementservices@motorolasolutions.com and ensure you
include the following essential device information:
•
Model number
•
Serial number
•
Proof of purchase
•
Title of the software download you are requesting.
If it is determined by Motorola that your device is entitled to the latest
version of software, as of the date you purchased your device, you
will receive an e-mail containing a link directing you to a Motorola
Web site to download the appropriate software.
5 6 74
Loading...