The Motorola products described in this manual may include copyrighted
Motorola and third party software stored in semiconductor memories or
other media. Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive rights for
copyrighted software, such as the exclusive rights to distribute or
reproduce the copyrighted software. Accordingly, any copyrighted
software contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to the
extent allowed by law. Furthermore, the purchase of the Motorola
products shall not be deemed to grant either directly or by implication,
estoppel, or otherwise, any license under the copyrights, patents, or
patent applications of Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use that
arises by operation of law in the sale of a product.
Sending a Data or Fax Call . . . . . . . . . . . . . . . . . . . 140
Receiving a Data or Fax Call. . . . . . . . . . . . . . . . . . 141
Security
Troubleshooting
Programming Instructions
Specific Absorption Rate Data
Additional Health and Safety Information
Warranty
Product Registration
Export Law Assurances
RF Energy Interference
Index
Wireless Phone Safety Tips
This user guide introduces you to the many features in your
Motorola wireless phone.
Navigating To a Menu Feature
Use the menu system to access your phone’s features. This
guide shows you how to select a menu feature as follows:
Find the Feature
This example shows that you must press
select
Messages
, then scroll to and select
M
>
>
Optional Features
This label identifies an optional network or
subscription-dependent feature that may not be
offered by all service providers in all geographical
areas. Contact your service provider for more
information.
Optional Accessories
This label identifies a feature that requires an optional
Motorola Original™ accessory.
10
Messages
Create Message
M
, scroll to and
Create Message
.
Safety and General Information
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR PHONE.
The information provided in this document supersedes the general safety
information in user guides published prior to December 1, 2002.
Exposure To Radio Frequency (RF) Energy
Your phone contains a transmitter and a receiver. When it is ON, it
receives and transmits RF energy. When you communicate with your
phone, the system handling your call controls the power level at which
your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings to RF
energy.
Operational Precautions
To assure optimal phone performance and make sure human exposure to
RF energy is within the guidelines set forth in the relevant standards,
always adhere to the following procedures.
External Antenna Care
Use only the supplied or Motorola-approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage the
phone.
Do NOT hold the external antenna when the phone is IN USE. Holding
the external antenna affects call quality and may cause the phone to
operate at a higher power level than needed. In addition, use of
unauthorized antennas may result in non-compliance with the local
regulatory requirements in your country.
11
Phone Operation
When placing or receiving a phone call, hold your phone as you would a
wireline telephone.
Body-Worn Operation
To maintain compliance with RF energy exposure guidelines, if you wear a
phone on your body when transmitting, always place the phone in a
Motorola-supplied or approved clip, holder, holster, case, or body harness
for this phone, if available. Use of accessories not approved by Motorola
may exceed RF energy exposure guidelines. If you do not use one of the
body-worn accessories approved or supplied by Motorola, and are not
using the phone held in the normal use position, ensure the phone and its
antenna are at least 1 inch (2.5 centimeters) from your body when
transmitting.
Data Operation
When using any data feature of the phone, with or without an accessory
cable, position the phone and its antenna at least 1 inch (2.5 centimeters)
from your body.
Approved Accessories
Use of accessories not approved by Motorola, including but not limited to
batteries and antenna, may cause your phone to exceed RF energy
exposure guidelines. For a list of approved Motorola accessories, visit our
website at
www.Motorola.com
.
RF Energy Interference/Compatibility
Note:
Nearly every electronic device is susceptible to RF energy
interference from external sources if inadequately shielded, designed, or
otherwise configured for RF energy compatibility. In some circumstances
your phone may cause interference.
Facilities
Turn off your phone in any facility where posted notices instruct you to do
so. These facilities may include hospitals or health care facilities that may
be using equipment that is sensitive to external RF energy.
12
Aircraft
When instructed to do so, turn off your phone when on board an aircraft.
Any use of a phone must be in accordance with applicable regulations per
airline crew instructions.
Medical Devices
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
6 inches (15 centimeters) be maintained between a handheld wireless
phone and a pacemaker.
Persons with pacemakers should:
•
ALWAYS keep the phone more than 6 inches (15 centimeters) from
your pacemaker when the phone is turned ON.
•
NOT carry the phone in the breast pocket.
•
Use the ear opposite the pacemaker to minimize the potential for
interference.
•
Turn OFF the phone immediately if you have any reason to suspect
that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of
your device to determine if it is adequately shielded from RF energy. Your
physician may be able to assist you in obtaining this information.
Use While Driving
Check the laws and regulations on the use of phones in the area where
you drive. Always obey them.
13
When using your phone while driving, please:
•
Give full attention to driving and to the road.
•
Use hands-free operation, if available.
•
Pull off the road and park before making or answering a call if driving
conditions so require.
Responsible driving best practices may be found in the “Wireless Phone
Safety Tips” at the end of this manual and at the Motorola website:
www.Motorola.com/callsmart
.
Operational Warnings
For Vehicles With an Air Bag
Do not place a phone in the area over an air bag or in the air bag
deployment area. Air bags inflate with great force. If a phone is placed in
the air bag deployment area and the air bag inflates, the phone may be
propelled with great force and cause serious injury to occupants of the
vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive
atmosphere, unless it is a phone type especially qualified for use in such
areas and certified as “Intrinsically Safe.” Do not remove, install, or
charge batteries in such areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire resulting in bodily injury or
even death.
Note:
The areas with potentially explosive atmospheres referred to above
include fueling areas such as below decks on boats, fuel or chemical
transfer or storage facilities, areas where the air contains chemicals or
particles, such as grain, dust, or metal powders. Areas with potentially
explosive atmospheres are often but not always posted.
14
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn OFF your
phone when you are near electrical blasting caps, in a blasting area, or in
areas posted “Turn off electronic devices.” Obey all signs and instructions.
Batteries
Batteries can cause property damage and/or bodily injury such as burns if
a conductive material such as jewelry, keys, or beaded chains touch
exposed terminals. The conductive material may complete an electrical
circuit (short circuit) and become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a pocket, purse, or
other container with metal objects.
and chargers.
Your battery or phone may contain symbols, defined as follows:
SymbolDefinition
Important safety information will follow.
Your battery or phone should not be disposed of in a
fire.
Your battery or phone may require recycling in
accordance with local laws. Contact your local
regulatory authorities for more information.
Your battery or phone should not be thrown in the
trash.
LiIon BATT
Your phone contains an internal lithium ion battery.
Use only Motorola original batteries
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts when
exposed to blinking lights, such as when watching television or playing
video games. These seizures or blackouts may occur even if a person
never had a previous seizure or blackout.
15
If you have experienced seizures or blackouts, or if you have a family
history of such occurrences, please consult with your doctor before
playing video games on your phone or enabling a blinking-lights feature
on your phone. (The blinking-light feature is not available on all products.)
Parents should monitor their children's use of video game or other
features that incorporate blinking lights on the phones. All persons should
discontinue use and consult a doctor if any of the following symptoms
occur: convulsion, eye or muscle twitching, loss of awareness, involuntary
movements, or disorientation.
To limit the likelihood of such symptoms, please take the following safety
precautions:
•
Do not play or use a blinking-lights feature if you are tired or need
sleep.
•
Take a minimum of a 15-minute break hourly.
•
Play in a room in which all lights are on.
•
Play at the farthest distance possible from the screen.
Repetitive Motion Injuries
When you play games on your phone, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of your
body. Follow these instructions to avoid problems such as tendonitis,
carpal tunnel syndrome, or other musculoskeletal disorders:
•
Take a minimum 15-minute break every hour of game playing.
•
If your hands, wrists, or arms become tired or sore while playing,
stop and rest for several hours before playing again.
•
If you continue to have sore hands, wrists, or arms during or after
play, stop playing and see a doctor.
16
Getting Started
What’s in the Box?
Your wireless phone typically comes equipped with a
battery and a charger. Other accessory options can
customize your phone for maximum performance and
portability.
To purchase Motorola Original™ accessories, contact the
Motorola Customer Call Center at 1-800-331-6456 in the
United States or 1-800-461-4575 in Canada.
Installing the Battery
You must install and charge the battery to use your phone.
Your phone is designed to be used only with
Motorola Original batteries and accessories. We
recommend that you store batteries in their
protective cases when not in use.
Do This
1
Remove the battery from its protective clear
plastic case.
2
If necessary, push
down the battery
door release latch
and lift the door off
of the phone.
Release
latch
Getting Started
17
Do This
3
4
Getting Started
Insert the battery,
printed arrow first,
under the tab
the top of the
battery
compartment and
push down.
Insert the ridge at
the bottom of the
battery door into
the base of the
phone, then push
the door down and
snap it into place.
at
Charging the Battery
New batteries are shipped partially charged. Before you
can use your phone, you need to install and charge the
battery, as indicated by the following instructions. Some
batteries perform best after several full charge/discharge
cycles.
Do This
1
Plug the
travel
charger into
your phone
with the
release tab
facing up.
Release
tab
18
Do This
2
Plug the other end of the travel charger into the
appropriate electrical outlet.
3
When your phone indicates that the battery is
fully charged (
release tab and remove the travel charger.
Charge Complete
), press the
Note:
When you charge the battery, the battery level
indicator in the upper right corner of the display flashes
and shows how much of the charging process is complete.
Changing the Convertible
Covers
You can replace the flip cover and battery cover on
your phone to personalize its appearance.
Matching front and back cover sets are available in
a variety of colors and designs.
Your phone is designed to be used only with Motorola
Original accessories. See your Motorola retailer for these
convertible covers.
Getting Started
19
Remove a Flip Cover
Do This
1
Open your flip
phone half way.
2
Press in the tiny
silver release
button with your
fingernail. This
button is on the
side of the top half
of the phone.
Getting Started
3
While pressing the
silver button in,
slide the cover off
the phone.
Attach a Flip Cover
Do This
1
Close your flip phone.
2
Line up the ridges
on each side of
the cover so that
they align with the
slots on the
phone.
20
3
Slide the cover onto the phone until it snaps into
place.
Turning Your Phone On
Do ThisTo
1
Open your phoneexpose the keypad
2
Press and hold P
for three seconds
turn on your phone
Power
key
3
If necessary, enter
your four-digit
unlock code and
press
OK
(+)
Making a Call
Do ThisTo
1
Press the
keypad keys
2
Press
N
dial the phone number
Tip:
press
the last digit, or press and
hold
digits.
make the call
unlock your phone
The unlock code is
originally set to 1234.
Your service provider may
change this number
before you receive your
phone.
If you make a mistake,
DELETE
(-) to delete
DELETE
(-) to clear all
Getting Started
21
Ending a Call
PressTo
O
end the call
Answering a Call
When you receive a call, your phone rings and/or vibrates
and displays an incoming call message.
PressTo
N
Getting Started
Tip:
If your phone is locked, you must unlock it to answer
the call.
or
ANSWER
(+)
answer the call
Seeing Your Phone Number
PressTo
M#
see your phone number
22
About Your Phone
See page 1 for a basic phone diagram.
Using the Display
➌
In Use
Indicator
➋
Digital/
Analog
Signal
Indicator
➊
Signal
Strength
Indicator
➓
Ring Style
Indicator
The idle display is the standard display that you see when
you are not on a call or using the menu.
Labels at the bottom corners of the display show the
current soft key functions. A
bottom center of the display indicates that you can press
M
to enter the main menu.
➍
Roam
Indicator
E
Y
➎
Location
Indicator
ä
U
f59
;
12:00am
E
PH.BOOKMESSAGE
G
➒
Menu
Indicator
Soft Key Labels
G
(menu) indicator at the
J
➏
Message
Waiting
Indicator
➐
Battery
Level
Indicator
➑
Active
line
Indicator
Clock
About Your Phone
23
➊
Signal Strength Indicator
strength of the network connection. You cannot make or
receive calls when the
➋
Digital or Analog Signal Indicator
whether you are receiving a digital or analog
signal.
➌
In Use Indicator
➍
is seeking or using another network system
outside your home network.
➎
Indicates when your Location Information is
available
➏
Message Waiting Indicator
you receive a voicemail or text message.
About Your Phone
➐
Battery Level Indicator
charge level. Recharge the battery when you see
Low Battery
and hear the low battery alert.
➑
Active Line Indicator
active phone line.
0
Shows that a call is in progress.
Roam Indicator
Location Information Indicator
ä
or unavailableã.
Vertical bars show the
(no signal) indicator is displayed.
Shows that your phone
Appears when
Vertical bars show the battery
Shows the current
Shows
➒
Menu Indicator
enter the main menu or open a feature sub-menu.
24
Indicates that you can press
M
to
➓
Ring Style Indicator
Y
= loud ring
W
=vibrate
a
= silent
Shows the ring style setting.
X
=soft ring
Z
= vibrate and ring
Zooming In and Out
Press and release
zoom the text in and out on the display. Zoom in to
increase text size, zoom out to display more
information.
You can also zoom in and out from the menu. See
page 59.
M
, then press and hold
M
Using the
Status Light
The status light shows when
you have an incoming call or
message, or when your
phone is roaming (using a
non-home system).
IndicationStatus
alternating red/greenincoming call
flashing greenin service, home system
flashing yellowroaming, non-home system
flashing redno service
to
About Your Phone
Status
light
25
The status light initially is turned off to extend battery life.
To turn it on, see “Initial Setup” on page 58.
Note:
Turning on the status light will substantially reduce
your phone’s standby time, the length of time that your
phone’s battery retains power when the phone is turned on
but is not in use.
Adjusting Volume
Press the up and down
volume keys to:
•
increase and
decrease earpiece
volume during a call
•
increase and decrease the ringer volume setting when
the idle display is visible (flip must be open)
Tip:
At the lowest volume setting, press the down
volume key to switch to silent alert. Press the up
volume key to reset ring alert.
About Your Phone
•
turn off an incoming call alert
Volume
keys
Using the Smart Key
The smart key gives you
another way to perform many
basic phone functions. It
anticipates the next action you
are likely to perform. For
example, when you highlight a menu item, you can press
the smart key to select it. You can use the smart key to
make and end calls, toggle features on and off, and open
Smart
key
26
your phonebook. The smart key usually performs the same
function as the right soft key (
Note:
The smart key provides an optional way to do some
things faster. It is never the only way to perform a task.
+
).
Using the External Display
When the flip is closed,
the external display shows
the time and date. It also
displays messages to
notify you of incoming
calls and other events. You can perform the following
functions in the external display.
Set Phone Ring Style
PressTo
1
volume keysscroll to
2
smart keyselect a ring style
3
volume keysreturn to the idle display
Return an Unanswered Call
External
display
Style
About Your Phone
Your phone keeps a record of your unanswered calls and
displays
PressTo
1
2
X Missed Calls
smart keysee the received calls list
volume keysscroll through the list and
in the external display.
select a call to return
27
PressTo
3
smart keymake the call
Note:
Because the microphone and earpiece are
unavailable when the phone is closed, you must use a
headset or other hands-free device with this feature.
Battery Use
Battery performance depends on many factors,
including your wireless carrier’s network configuration;
signal strength; the temperature at which you operate
your phone; the features and/or settings you select and
use; and your voice, data, and other application usage
patterns.
Battery Care
Caution:
objects to contact or short-circuit the battery terminals.
To maximize your battery’s performance:
About Your Phone
•
•
•
28
To prevent injuries or burns, do not allow metal
Always use Motorola Original™ batteries and battery
chargers. The phone warranty does not cover damage
caused from using non-Motorola batteries and/or
battery chargers.
New batteries or batteries that have been stored for
long periods of time may require a longer charge time.
Maintain the battery at or near room temperature
when charging.
•
Do not expose batteries to temperatures below
-10°C (14°F) or above 45°C (113°F). Always take your
phone with you when you leave your vehicle.
•
When you do not intend to use a battery for a while,
store it uncharged in a cool, dark, dry place, such as a
refrigerator.
•
Over extended periods of time, batteries gradually
wear down and require longer charging times. This is
normal. If you charge your battery regularly and
notice a decrease in talk time or an increase in
charging time, then it is probably time to purchase
a new battery.
The rechargeable batteries that power this
product must be disposed of properly and may
need to be recycled. Refer to your battery’s label
for battery type. Contact your local recycling center for
proper disposal methods. Never dispose of batteries in a
fire because they may explode.
About Your Phone
29
Making and
Answering Calls
For basic instructions on how to make a call, end a call,
and answer a call, see pages 21–22.
Redialing a Number
If you hear an ordinary busy signal:
PressTo
1
O
2N
Using Automatic Redial
If the network is busy, you hear a fast busy signal, and your
phone displays
With automatic redial, your phone automatically redials the
number for four minutes. When the call goes through, your
phone rings or vibrates one time, displays
Redial Successful
Call Failed
, and then connects the call.
hang up
redial the busy number
.
You must turn on automatic redial to use the feature. See
the “Auto Redial” option on page 59.
Making and Answering Calls
30
When automatic redial is turned off, you can manually
activate the feature to redial a phone number. When you
hear a fast busy signal and see
PressTo
N
or
RETRY
(+)
activate automatic redial
Call Failed
:
Using Caller ID
Calling line identification (caller ID) displays the
phone number for incoming calls.
The phone displays the caller’s name when the
name is stored in your phonebook, or
Incoming Call
when caller ID information is not available.
Returning an Unanswered
Call
Your phone keeps a record of your unanswered calls, and
displays:
•
the N (missed call) indicator
•
X Missed Calls Y Unknown
number of missed calls and
calls with no caller ID information
PressTo
VIEW
1
2
3N
(+)see the received calls list
S
, where X is the total
Y
is the number of missed
select a call to return
make the call
Making and Answering Calls
31
Calling an Emergency Number
Your service provider programs one or more emergency
phone numbers, such as 911, that you can call under any
circumstances, even when your phone is locked.
Note:
Emergency numbers vary by country. Your phone’s
pre-programmed emergency number(s) may not work in all
locations, and sometimes an emergency call cannot be
placed due to network, environmental, or interference
issues.
PressTo
1
keypad keysdial the emergency number
2N
call the emergency number
Turning Off a Call Alert
You can turn off your phone’s incoming call alert before
answering the call.
PressTo
either volume keyturn off the alert
Canceling an Incoming Call
While the phone is ringing or vibrating:
PressTo
O
or
IGNORE
(-)
Making and Answering Calls
32
cancel the incoming call
Depending on your phone settings and/or
service subscription, the call may be forwarded
to voice mail, another number, or the caller may
hear a busy signal.
Calling With Speed Dial
Each entry you store in your phonebook is assigned a
unique speed dial number. To speed dial a phonebook
entry:
PressTo
1
keypad keysenter the speed dial number
for the entry you want to call
2
#
submit the number
Note:
Some
networks let you
skip this step for
speed dial
numbers 1 through 99.
3N
call the entry
Calling With One-Touch Dial
Making and Answering Calls
To call phonebook entries 1 through 9, just press and hold
the one-digit speed dial number for one second.
We recommend that you reserve phonebook entry 1
(speed dial number 1) for storing and dialing your
voicemail number. In many cases, your service provider
has already done this for you. If necessary, see page 68 to
store your voicemail number for one-touch dial access.
33
Calling a Number In a Text
Message
To call a phone number embedded in a text
message that you receive, highlight or open the
message and then:
PressTo
1
M
2
3
open the
S
SELECT
(+)call the number
scroll to
Inbox Menu
Call Back
Additional Calling Features
While dialing (with digits visible in the display), open
the
Dialing Menu
PressTo
M
>
Attach Number
M
>
Insert Pause
M
>
to perform the following tasks:
attach a number from the
phonebook or recent call lists
insert a
Insert Wait
For more information, see
page 70.
insert a
p
(pause) character
w
(wait) character
Making and Answering Calls
34
For more information, see
page 70.
PressTo
M
>
Insert ‘n’
insert an
n
(number)
character
For more information, see
page 70.
M
>
Send Message
open a new text message
with the number in the
To
You can also call a number using these features:
Do ThisTo Call
Press and release the voice
key, then say a voice name
a phonebook entry
using voice dial
field
Press
M
>
Received Calls
Dialed Calls
Voice
key
>
Recent Calls
or
> entry to call
To record a voice
name, see page 72.
a missed call, or a
recent received or
dialed call
Making and Answering Calls
35
Using Features While
On a Call
Using Call Waiting
When you are on a call, an alert tone sounds to
indicate that you have received a second call.
PressTo
answer the new call
switch back to the first call
Using Features While On a Call
1
N
or
ANSWR
(+)
2N
Making a Three-Way Call
During a call, you can call and connect a
third party for a three-way call. You cannot
do this if you already have a call on hold.
36
PressTo
keypad keysdial the third party’s number
1
Note:
Some networks may
require you to press
2N
call the number
N
first.
PressTo
3N
4O
connect the two calls
end the entire call
Additional On-Call Features
PressTo
MUTE
(+) (if available)
or
M
>
Mute
SPEAKER
(+) (if
available) or
M
>
Spkrphone On
M
>
My Tel. Number
M
>
Send Tones
M
>
TTY Mode
M
>
Received Calls
or
Dialed Calls
M
>
Messages
M
>
Datebook
change to TTY mode to
mute the call
activate an attached
speakerphone during an
active call
see your phone number
send a number to the
network as DTMF tones,
for credit card or
password calls
To activate DTMF tones,
see the “DTMF” option
on page 6060.
use your phone with a
TTY device
view recent received or
dialed call numbers
view or send messages
view datebook entries
Using Features While On a Call
37
Using Features While On a Call
PressTo
M
>
Location
view and change the
location transmission
status of your phone
M
>
Other Information
view phone
specifications
38
Using the Menu
Navigating to a Feature
Use these keys to move through the menu system:
Left Soft Key
Perform function
shown in lower
left corner of
display (usually
EXIT
or
BACK
).
Menu Key
Enter menu system,
or open a sub-menu,
when
G
appears in
bottom center of
display.
Volume Keys
Scroll up or
down through
menus and lists.
End Key
Exit menu system
without making
changes, return
to idle display.
59
Dialed Calls
10) John Smith
9) Mary Smith
G
BACKVIEW
Right Soft Key
Perform function
shown in lower
right corner of
display (usually
SELECT
the
highlighted
menu item).
Scroll Key
Scroll up or down
through menus
and lists. From
idle display,
press up or
down to open
phonebook.
*
and
#
Cycle through
and set the
value of the
highlighted
menu item.
Using the Menu
39
Selecting a Feature Option
Some features require you to select an item from a list:
Press
BACK
(-)
to go back to
the previous
screen.
Press
M
open the sub-menu.
•
Press S to scroll up or down to highlight the item you
want.
•
In a numbered list, press a number key to highlight the
item.
•
In an alphabetized list, press a key multiple times to
cycle through the letters on the key and highlight the
closest matching list item.
Using the Menu
59
Dialed Calls
10)John Smith
9)Mary Smith
BACKVIEW
to
G
Press
VIEW
details of the highlighted item.
(+) to view
Highlighted
item
40
Entering Feature Information
Some features require you to enter information:
Press S to
scroll down
to additional
items.
Press
CANCEL
without making changes.
DONE
(-) appears when
you enter or edit information.
•
Enter numbers or text with the keypad.
•
When an item has a list of possible values, press
*or#
•
When an item has a list of possible values, press S
to the left or right to scroll through and select a value.
•
When an item has a list of possible numeric values,
press a number key to set the value.
•
If you enter or edit information and do not want to save
your changes, press
59
Entry Details
Name:_____________
No.:_______________
CANCELCHANGE
(-) to exit
to scroll through and select a value.
G
O
to exit without saving.
Highlighted
item
Press
CHANGE
(+)
to edit the
information.
Using the Menu
41
The message center lets you compose and send text
messages. A flashing cursor shows where text will appear:
Flashing
cursor
indicates
insertion
point.
59
Msg:
Press
INSERT
(+)
to view and
insert a
quick note.
CANCELINSERT
Press
CANCEL
(-) to exit
without making changes.
G
Press
M
to open
the sub-menu.
When you enter text using the standard tap method, the
flashing cursor changes to a block cursor, and the soft key
functions change:
Block
cursor
indicates
current
highlighted
character.
After two seconds, the
block cursor reverts to a
Using the Menu
flashing cursor and moves
to the next position.
59
Msg:
T
DELETEOK
G
Press
DELETE
to delete the character
to the left of the insertion
point.
Press
OK
(+)
to accept
and store
the text.
(-)
42
Entering Text
Multiple text entry methods make it easy for you to
enter names, numbers, and messages on your phone.
Choosing a Text Mode
Press
M
from any text entry screen to select a text
mode. The symbol for the active mode appears at the top
of the text entry screen:
iTAP
(é)
Tap
(t)
Numeric
Symbol
Browse
Note:
change it by selecting another mode.
Let the phone predict each word as you
enter it. See page 48.
Enter letters, numbers, and symbols by
pressing a key one or more times. See
page 44.
Enter numbers only.
(è)
Enter symbols only. See page 47.
(ê)
Browse your phonebook or recent call
lists to select a name or number.
The text mode you select remains active until you
Entering Text
43
Using Tap Method
This is the standard mode for entering text on your
phone.
Press
M
from any text entry screen and select the
Tap Method
Do ThisTo
1
2
Entering Text
3
menu option.
Press a number
key one or more
times
Continue
pressing number
keys
Press OK(+)store the text when you are
select a letter, number, or
symbol shown in the
“Character Chart” on page 46
enter the remaining
characters
finished
44
General Text Entry Rules
Press a number key repeatedly to cycle through its
characters. See “Character Chart” on page 46.
Press a number
key as many
times as
necessary to
Msg:
enter the
desired
character at
flashing cursor
location.
CANCEL BROWSE
Change letter in
block cursor to
uppercase or
lowercase.
Press and hold
a number key
to cycle
between text
and numeric
Move flashing
cursor to the left
or right in text
message.
entry modes.
•
If you do not press a key for two seconds, the
character in the block cursor is accepted, and the
cursor moves to the next position.
•
The first character of every sentence is capitalized.
(Press
S
down to force the character to lowercase
while it is highlighted by the block cursor).
Entering Text
45
Character Chart
Use this chart as a guide for entering spaces, letters,
numbers, and symbols with the tap method.
1
space . 1 ? ! , @ _ & ~ : ; " -
2
3
4
g h i 4 ï í î γ η
5
j k l 5 κ
6
Entering Text
Note:
m n o 6 ñ ö ø ó ò ô õ µ υ
7
8
9
0
+ - 0 x * / \ [ ] = > < # §
This chart may not reflect the exact character set
available on your phone.
( ) ' ¿ ¡ % £ $ ¥
a b c 2 ä å á à â ã æ
δ
d e f 3
ë é è ê ε
λ
π
p q r s 7
t u v 8
w x y z 9
ß
θ
ü ú ù û
ξ ψ
φ
ι
σ
τ
α β
ç
ω
46
Using Symbol Mode
Your phone provides an alternate way to enter symbol
characters in a message. Press
entry screen and select the
Do ThisTo
1
Press a number
key one time
2
Press *or
or
Press the
number key
multiple times
3
Press
SELECT
(+)
display its symbol options at
the bottom of the display
See “Symbol Chart” on
page 47.
highlight the symbol you want
#
enter the symbol at the
flashing cursor location
Symbol Chart
Use this chart as a guide for entering characters in symbol
mode.
M
Symbol
from any text
menu option.
Entering Text
1
space . ? ! , @ _ &
~ : ; " - ( ) ' ¿ ¡ %
£ $ ¥
2
@ _ \
3
/ : ;
4
" & '
47
5
( ) [ ] { }
6
¿ ¡ ~
7
< > =
8
$ £ ¥
9
# % *
0
+ - x * / = > < # §
Using iTAP™ Software
Predictive Text Entry Method
iTAP™ software provides a predictive text entry method
Entering Text
that lets you enter a word using one keypress per letter.
Press
M
from any text entry screen and select the
menu option.
Note:
You can switch languages within a message in iTAP
text mode. Press
language you want to use.
Enter Words
Do ThisTo
1
Press a number
key one time
M
to select the text mode and
enter the first letter of the
word
The letters associated with
the key are shown at the
bottom of the display.
iTAP
48
Do ThisTo
2
Press number
keys (one per
letter)
enter the rest of the word
Alternative words and letter
combinations are shown at
the bottom of the display. The
word choices are updated
with each keypress.
3
Press *or
4
Press
SELECT
(+)
#
highlight the word you want
enter the word at the flashing
cursor location
A space is automatically
inserted after the word.
For example, to spell the word “art,” press 2 7 8.
The display shows:
Entering Text
Flashing
cursor
indicates
insertion
point.
Press
Art Apt Cpu Cstc
DELETESELECT
DELETE
(-)
to clear the last letter.
Press
S
to
scroll and see
additional word
choices.
Press
SELECT
(+) to
insert the highlighted word.
49
Enter Novel Words
You may enter a word that the iTAP software does not
recognize. If the word you want is not displayed:
Do ThisTo
1
Press
DELETE
(-)
one or more times
2
Press *or
3
Entering Text
Press
then press
4
Continue to enter
letters and highlight
letter combinations
SELECT
#
(+),
*
delete letters until you
see a letter combination
that matches the start of
the word
highlight the letter or
letter combination
shift the text entry cursor
to the left and “lock” the
selected word portion
spell the word
Punctuation
PressTo
0
or
1
enter punctuation or other
characters as shown in the
“Character Chart” on page 46
50
Capitalization
The first word of a sentence is automatically capitalized,
with following words in lowercase.
PressTo
S
change the words to initial
character capitalized, all
uppercase characters, or all
lowercase characters
Enter Numbers
Do ThisTo
1
Enter the first
digit and then
highlight it
2
Press number
keys
3
Press
SELECT
(+)
put the iTAP software in
number entry mode
add digits to the number
enter the number at the
flashing cursor location
Delete Letters and Words
Place the cursor to the right of the text you want to delete,
and then do the following:
Entering Text
Do ThisTo
Press
DELETE
(-)delete one letter at a time
Hold
DELETE
(-)delete the entire message
51
Menu Feature
Descriptions
This chapter describes all of your phone’s features in order
of the menu map shown on page 3.
Main Menu
P
52
HONEBOOK
Store names and numbers as entries in your
phonebook, then call numbers by selecting them
from the phonebook list. See page 67.
R
ECENT CALLS
Received Calls
View a list of recently received calls. See page 63.
Dialed Calls
View a list of recently dialed calls. See page 63.
Menu Feature Descriptions
Notepad
Call or store the last number entered on the keypad.
See page 64.
Call Times
View call timers that track time spent on
your last call, dialed calls, received calls,
all calls since reset, and all calls total. See page 65.
M
M
M
M
M
>
Phonebook
>
Recent Calls
>
Received Calls
>
Recent Calls
>
Dialed Calls
>
Recent Calls
>
Notepad
>
Recent Calls
>
Call Times
M
ESSAGES
M
>
Messages
Adjust message settings, view and
manage the various types of messages
your phone can receive and/or send:
Voicemail
Listen to your recorded
voice messages. See
page 87.
Create Message
Create new text messages.
See page 95.
Inbox
Read and manage text
messages. See page 90.
Outbox
View all outgoing text
messages, delivered and
undelivered.
Quick Notes
Select and send pre-written
messages from the quick
notes list. See page 98.
Drafts
Store and edit text
messages that you have
written but not sent.
B
ROWSER
M
>
Browser
The micro-browser delivers WAP
(Wireless Application Protocol) pages
from your service provider directly to your
phone. See page 118.
Menu Feature Descriptions
53
R
ING STYLES
M
>
Ring Styles
Select or edit the ring style your phone uses to
notify you of incoming calls, messages, or other
events. See page 101.
P
ICTURE VIEWER
M
>
Picture Viewer
View and manage the pictures and animations
stored on your phone. See page 77.
S
HORTCUTS
M
>
Shortcuts
Create keypad or voice shortcuts to menu
features. See page 109.
C
ALCULATOR
M
>
Calculator
Use your phone as a calculator or currency
converter. See page 120.
D
ATEBOOK
M
>
Datebook
Use the datebook calendar to schedule and review
your appointments. See page 79.
V
OICE RECORD
M
>
Voice Record
Use the voice key to record messages and phone
calls. See page 112.
Note:
Menu Feature Descriptions
Recording phone calls is subject to varying
state and federal laws regarding privacy and
recording of conversations.
54
R
ADIO
M
>
Media Center
Radio
>
Listen to FM radio stations with the optional
Motorola Original™ FM Stereo Radio
Headset accessory. This menu feature is displayed
only when the FM Stereo Radio Headset is plugged
into the accessory connector port on your phone.
See page 84.
B
REW
M
>
Brew
You can download and launch games and
applications on your phone. See page 123.
Note:
Your service provider may rename the Brew
feature.
Settings Menu
P
HONE STATUS
My Tel. Number
View, enter, and edit information about your name
and phone number.
Active Line
Change the active phone line to send and receive
calls from either of the available numbers.
Battery Meter
View a detailed battery charge meter.
Other Information
View your phone’s feature specifications
(if available from the service provider).
M
>
Settings >Phone Status
>
My Tel. Number
M
>
Settings
>
Phone Status
>
Active Line
M
>
Settings >Phone Status
>
Battery Meter
M
>
Settings
>
Phone Status
>
Other Information
Menu Feature Descriptions
55
C
ONNECTION
Connect your phone to a computer or
hand-held device to send and receive data
and fax calls on the connected device.
Incoming Call
M
>
Settings
>
Other Settings
>
Connection
>
Incoming Call
Specify the format for the next incoming call. You
can select
Fax In Only, Data In Only
, or
Normal
.
See page 141.
IN-C
ALL SETUP
Set the features that are active during a call, such
as the in-call timer and call answering options.
In-Call Timer
Adjust call timer
M
Display
>
Settings >In-Call Setup
>
In-Call Timer
and
Beep
settings. You can
set your timer to beep at a selected interval during
your calls. (60 seconds is the default.) You can also
turn on or off a display timer during calls as follows:
Time
Display the elapsed time for
Menu Feature Descriptions
Off
No in-call timer display.
the current call.
56
Answer Options
M
>
Settings >In-Call Setup
>
Answer Options
Turn call answering options on or off:
Multi-Key
Open to Answer
Answer by pressing any key.
Answer by opening the flip.
S
ECURITY
Phone Lock
M
>
Settings >Security
>
Phone Lock
Lock and unlock your phone. See page 145.
Lock Application
M
>
Settings >Security
>
Lock Application
Lock and unlock specific phone applications (such
as phonebook or datebook). When an application is
locked, users must enter the unlock code to use
the application.
Restrict Calls
M
>
Settings >Security
>
Restrict Calls
Restrict incoming and outgoing calls. See
page 146.
New Passwords
M
>
Settings >Security
>
New Passwords
Change your unlock code (originally set to 1234) or
your security code (originally set to 000000). See
page 143.
L
OCATION
M
>
Settings
>
Location
If your phone has the automatic location
information (ALI) feature, it can tell the
phone network where you are physically located.
See page 132.
Menu Feature Descriptions
57
O
THER SETTINGS
Personalize
M
>
Settings >Other Settings
>
Personalize
Set several personal phone options:
Main Menu
Change the order of the
main menu. See page 130.
Keys
Change the functions of the
soft keys and smart key in
the idle display. See
page 130.
Greeting
Change the text
displayed when
you turn on your
phone.
Screen Saver
Change your phone’s
screen saver image. See
page 131.
Banner
Change the text that
appears in the idle display.
Note:
Banner text does not
Menu Feature Descriptions
appear in your phone’s
external display.
58
Initial Setup
M
>
>
Set many basic phone options:
Time and Date
Set the phone’s time and
date.
Settings >Other Settings
Initial Setup
Auto PIN Dial
Some networks
require an
authenticating PIN
code to allow
outgoing calls. Use this
feature to automatically dial
your PIN.
Auto Redial
Use this option to turn on or
turn off the automatic redial
feature. When you turn on
automatic redial, your phone
automatically redials calls
that fail due to busy network
conditions. See page 30.
Backlight
Set the amount of time that
the display backlight
remains on, or turn off the
backlight to conserve
battery power.
Status Light
Turn the status light off (to
conserve battery power)
and on.
Zoom
Switch between three lines
(
TTY Setup
Zoom Out
(
Zoom In
Set your phone to
) and two lines
) of display text.
operate in one of
three TTY modes,
or return to normal
Voice
mode. See page 133.
Menu Feature Descriptions
59
Scroll
Force the cursor to stop or
wrap around when it
reaches the top or bottom of
a list in the display.
Animation
Turn animation off (to
conserve battery power) or
on. Animation makes your
phone’s menus move
smoothly as you scroll up
and down.
Language
Set the language for phone
menus.
Contrast
Adjust the contrast setting
for your display.
DTMF
Your phone can send a
number to the network as
dual tone multi-frequency
(DTMF) tones. DTMF tones
are used to communicate
with automated systems
that require you to enter a
Menu Feature Descriptions
number such as a code,
password, or credit card
number. Use this option to
set DTMF tones to be long,
short, or off.
60
Master Reset
Reset all options back to
their original factory settings
except for the unlock code,
security code, and lifetime
timer.
Master Clear
Reset all options back to
their original factory settings
except for the unlock code,
security code, and lifetime
timer, and clear all user
settings and entries.
Note:
This option erases all
user-entered information
stored in your phone’s
memory, including
phonebook and datebook
entries. Once you erase the
information, it cannot be
recovered.
Network
M
>
Settings
>
Other Settings
>
Network
View and adjust your phone’s network
settings.
Your service provider registers your phone to a
network. You can view information about the current
network, change how your phone searches for a
network, and activate alerts that indicate when a
call is dropped or network registration changes.
Menu Feature Descriptions
61
Car Settings
M
>
Settings
>
Other Settings
>
Car Settings
Adjust hands-free car kit settings.
You can set your phone to route calls directly to the
car kit when it detects a connection, and
automatically answer calls after two rings. See
page 135.
Note:
The use of wireless devices and their
accessories may be prohibited or restricted in
certain areas. Always obey the laws and
regulations on the use of these products.
Headset
M
>
Settings
>
Other Settings
>
Headset
Set your phone to automatically answer
calls after two rings when connected to a headset.
See page 135.
Menu Feature Descriptions
62
Recent Calls
Viewing Received Calls or
Dialed Calls
Your phone keeps a list of the calls you recently received
and dialed, even if the calls did not connect. The lists are
sorted from newest to oldest entries. The oldest entries
are deleted as new ones are added.
Shortcut:
from the idle display.
Press N to go directly to the dialed calls list
Find the Feature
PressTo
S
1
2
SELECT
(+)select the list
3
S
4N
or
VIEW
(+)
or
M
M
scroll to
Dialed Calls
scroll to an entry
Note: \ means the call
connected.
call the entry’s number
view entry details
open the
perform other procedures as
described in the following list
>
Recent Calls
Received Calls
Last Calls Menu
or
Recent Calls
to
63
The
Last Calls Menu
can include the following options:
OptionDescription
Store
Create a phonebook entry with
Delete
Delete All
Send Message
Add Digits
Attach Number
Add digits after the number.
the number in the
Delete the entry.
Delete all entries in the list.
Open a new text message with the
number in the
Attach a number from the
To
No.
field.
field.
phonebook or recent call lists,
after the highlighted number.
Send Tones
Send the number to the network
as DTMF tones, for credit card or
password calls.
Using the Notepad
Your phone stores the most recent string of digits entered
on the keypad in a temporary memory location called the
notepad. This can be a phone number that you called, or a
number that you entered but did not call. To retrieve the
Recent Calls
number stored in the notepad:
64
Find the Feature
M
>
Recent Calls
>
Notepad
PressTo
N
or
M
or
STORE
(+)
call the number
open the
attach a number or insert a
special character
create a phonebook entry
with the number in the
field
Dialing Menu
to
No.
Viewing and Resetting Call
Timers
Network connection time is the elapsed time from the
moment you connect to your service provider's network
to the moment you end the call by pressing
includes busy signals and ringing.
The amount of network connection time you track on
your resettable timer may not equal the amount of time
for which you are billed by your service provider. For
billing information, please contact your service
provider directly.
O
. This time
Recent Calls
You can view the following network connection
times:
65
TimerDescription
Last Call
Approximate time spent on last
dialed or received call. You cannot
reset this timer.
Dialed Calls
Approximate time spent on dialed
calls since the last time you reset
this timer.
Received Calls
Approximate time spent on
received calls since the last time
you reset this timer.
All Calls
Approximate time spent on dialed
and received calls since the last
time you reset this timer.
Lifetime
Approximate time spent on all
calls on this phone. You cannot
reset this timer.
To view a call timer:
Find the Feature
PressTo
Recent Calls
1
2
To reset the call timer:
PressTo
1
2
66
M
>
Recent Calls
>
Call Times
S
SELECT
(+)view the recorded time
RESET
(+)reset the time (if available)
YES
(-)confirm the reset
scroll to the timer you want
Phonebook
You can store a list of names and phone numbers or email
addresses in your phone’s electronic phonebook.
To see the names in your phonebook, press
M
>
Phonebook
and press
entry as shown below.
VIEW
Viewing Entry Details
indicator
Type
identifies
number type:
T
Work
P
Home
O
Main
Q
Mobile
S
Fax
R
Pager
h
Email
Return
to list
Note:
When you set a distinctive ringer alert for an entry,
the
Ringer ID
from the idle display. Scroll to a name
(+) to view details of the phonebook
Voice Name
indicates a recorded
voice name
59
TVCarlo Emrys
5551212
Speed No.15#(P)
BACKEDIT
Press
to open the
Phonebook
Menu
setting appears below the speed dial number.
M
indicator
G
Edit
entry
Name
Entry’s
Entry’s
phone
number
or
email address
Entry’s speed
dial number
Phonebook
67
Storing a Phonebook Entry
A phone number or email address is required for a
phonebook entry. All other information is optional.
Shortcut:
press
number in the
Enter Information
Enter a phone number in the idle display, then
STORE
(+) to create a phonebook entry with the
No.
field. Go directly to step 3 to continue.
68
Find the Feature
M
M
>
Phonebook
>
New
PressTo
S
1
2
SELECT
(+)select the entry type
3
CHANGE
Phonebook
4
keypad keysenter a name for the entry
5
OK
6
CHANGE
7
keypad keysenter the phone number or
(+)select
(+)store the name
(+)select
scroll to
Email Address
Phone Number
Name
No.
or
Email
or
email address (to a maximum
of 32 characters)
Tip:
You can store a PIN
code with the phone number.
See page 70.
8
OK
(+)store the phone number or
email address
PressTo
9
CHANGE
(+)select
Type
Note:
This option is not
available for email entries.
10S
11
SELECT
12
RECORD
(+)select the number type
(+)
or
scroll to the number type
record a voice name for the
entry, if desired
Go to step 13 if
you do not want
a voice name
13S
scroll to
Speed No.
The next available speed dial
number is assigned to a new
phonebook entry.
14
CHANGE
(+)select
Speed No.
if you want
to change it
15
keypad keysenter a different speed dial
number, if desired
16OK(+)store the speed dial number
17
CHANGE
(+)select
Ringer ID
if you want to
assign a distinctive ringer
alert for the phone number
Phonebook
Your phone uses the alert to
notify you when you receive a
call from this phone number.
See page 102.
69
PressTo
18S
19
SELECT
20
SELECT
(+)store the ringer ID alert
(+)select
scroll to the alert you want
MORE
if you want to
create another entry under
the same
You must use a different
identifier for each number.
Name
Complete Phonebook Entry
When you are finished entering information for a
phonebook entry:
PressTo
DONE
(-)store the entry
Phonebook
Storing a PIN Code With the
Phone Number
You can store a PIN code with the phone number for
calls that require additional digits (for example, to make
a calling card call, or to retrieve voicemail or answering
machine messages). Insert one or more of the following
Type
70
characters in the dialing sequence to ensure that the
number dials and connects properly:
PressTo
M
>
Insert Pause
insert a p (pause) character
Your phone dials the
preceding digits, waits for the
call to connect, then sends
the remaining digit(s). If your
network does not recognize
the first pause character, try
two (
pp
).
M
>
Insert Wait
insert a w (wait) character
Your phone dials the
preceding digits, waits for the
call to connect, then prompts
you for confirmation before it
sends the remaining digit(s).
M
>
Insert 'n'
insert an n (number)
character
Your phone prompts you for a
number before dialing the
call. The number you enter is
inserted into the dialing
sequence in place of the
n
character
Phonebook
Note:
You can store a maximum of 32 digits per number.
Each character counts as one digit.
71
Recording a Voice Name For a
Phonebook Entry
You can record a voice name for a new or existing
phonebook entry. A voice name lets you call the
phonebook entry using voice dial (see page 73).
Tip:
Make your recording in a quiet location. Hold the
phone about four inches (10 centimeters) from your mouth,
and speak directly into the phone in a normal tone of voice.
72
Find the Feature
Do ThisTo
Press S
1
2
Press
VIEW
(+) view entry details
3
Press
EDIT
(+) edit the entry
4
Press S
Phonebook
5
Press
RECORD
6
Press and release
the voice key and say
the entry’s name (in
two seconds)
7
Press and release
the voice key and
repeat the name
8
Press
DONE
M
>
Phonebook
scroll to the entry
scroll to
(+) begin recording
record the voice name
confirm the voice name
(-) store the voice name
Voice Name
Dialing a Phonebook Entry
Use one of the following procedures to call a number (or
send a text message to an email address) stored in your
phonebook.
Phonebook List
Find the Feature
PressTo
1
keypad key letter jump to entries that begin
2
S
3N
M
>
Phonebook
with that letter (optional)
scroll to the entry
make the call
Voice Dial
Do ThisTo
Press and release
the voice key and
say the entry’s name
(in two seconds).
To speed dial a phonebook entry, see page 33. To call an
entry with one-touch dial, see page 33.
make the call
Phonebook
73
Storing Longer Numbers
A phonebook number can contain a maximum of 32 digits
and characters. You can create multiple phonebook entries
to store a dialing sequence that exceeds the 32-character
limit. Then you can send the entries in sequence to dial the
number.
To store a dialing sequence longer than 32 characters:
Do This
1
Create a phonebook entry to store the first part
of the dialing sequence (for example, the number
for your long-distance service provider).
2
Create a second phonebook entry to store the
next part of the dialing sequence (for example,
the country code and phone number for an
international call).
3
Phonebook
Repeat step 2 as necessary to store the entire
dialing sequence. (For example, create a third
phonebook entry to store your calling card
number and PIN number.)
To dial a dialing sequence stored as multiple
phonebook entries:
74
Do This
Dial the first phonebook entry. Perform any
1
pause or wait tasks, if necessary, to complete the
dialing sequence. Your phone returns to the idle
display.
Do This
2
Press
M
>
Phonebook
phonebook.
3
Highlight the second phonebook entry, then
press
M
>
Send Tones
portion of the dialing sequence.
4
Repeat steps 2 and 3 as necessary to send the
entire dialing sequence.
to re-open the
to send the next
Editing a Phonebook Entry
Find the Feature
PressTo
S
1
2
VIEW
(+)view entry details
3
EDIT
(+) edit the entry
Edit the entry as described on pages 68-70.
M
>
Phonebook
scroll to the entry
Deleting a Phonebook Entry
Find the Feature
PressTo
S
1
2
M
open the
3
S
4
SELECT
(+)select
5
YES
(-)confirm the deletion
M
>
Phonebook
scroll to the entry
Phonebook Menu
scroll to
Delete
Delete
Phonebook
75
Sorting the Phonebook List
You can sort your phonebook list by speed dial number
(the standard), name, email address, or voice name.
Note:
The voice name sort is identical to the name sort,
except that entries with voice name tags appear first.
Find the Feature
PressTo
1
M
open the
2
S
3
SELECT
(+)select
4
S
5
CHANGE
6
S
Phonebook
7
SELECT
(+)select
(+)select the sort order
M
>
Phonebook
scroll to
scroll to
scroll to
Voice Name
Setup
Setup
Sort by
Sort by
Name, Speed No.
Phonebook Menu
, or
Synchronizing with TrueSync
Software
You can synchronize phonebook entries
between your phone and computer or
hand-held device with Starfish TrueSync
software, a Motorola accessory product. See
the TrueSync user guide for more information.
Note:
TrueSync software is designed to synchronize with
basic features of many popular Personal Information
Management (PIM) software and hardware products.
Email
,
®
76
Picture Viewer
Your phone contains pictures and animations
that you can use as screen saver images.
Note:
Your phone may include predefined
images. These images are identified by a
(predefined object) indicator. You cannot rename, delete,
or view details about predefined images.
q
Find the Feature
PressTo
S
1
2
SELECT
(+)view the picture
3
*
or
#
or
DETAILS
M
(+)
or
M
scroll to the picture
view the previous/next picture
view picture information
open the
menu to perform other
procedures as described in
the following list
>
Picture Viewer
Picture Viewer
Picture Viewer
77
The
Picture Viewer
menu can include the following
options:
OptionDescription
Details
View picture information.
Set as Screen Saver
Set the picture as your
phone’s screen saver
image.
Rename
Rename the picture.
Delete
Delete the picture.
To adjust your phone’s screen saver image, see page 131.
Picture Viewer
78
Datebook
The datebook is a calendar that lets you schedule and
organize events such as appointments and meetings.
You can set the datebook to send a reminder alarm for
specific events.
Note:
You must set the correct time and date on your
phone to use the datebook.
To schedule or review datebook events:
Datebook
Find the Feature
M
>
Datebook
Week View
The datebook initially displays a calendar for the week.
Lines or filled boxes indicate scheduled events.
Untimed
event
12 hour
window
Exit the
datebook
Full day (12-hour)
event scheduled
b15 NOV-21 NOV c
SMT WTFS
EXITVIEW
G
Press
the
Days of week
(press
*or#
to select)
One-hour event
Go to
selected day
M
to open
Datebook Menu
79
Day View
Select a day and press
events.
Untimed
event
Down scroll
bar
Datebook
Return to
previous screen
Event View
Select an event and press
Reminder
alarm
Down scroll
bar
Return to
previous screen
VIEW
(+) to see the day’s
bTHU 19-NOVc
• Joe's B-day
xMarie,...
9:00
BACKVIEW
x THU 9:00am
Marie, mtg about
new product
BACKEDIT
G
Press
M
the
Datebook Menu
VIEW
G
Press
M
the
Datebook Menu
to open
(+) to see event details.
to open
Day of week
Reminder
alarm
Event
Show event
details
Day and time
Event details
Edit event
80
Adding a Datebook Event
A title is required for a datebook event. All other
information is optional.
Note:
You must create an event to use the reminder
alarm.
Find the Feature
PressTo
1
CHANGE
2
keypad keys enter a title for the event
3
OK
4
S
5
DONE
(+)select
(+)store the event title
(-)store the event
M
>
Datebook
M
>
New
Title
scroll to other fields and enter
information as necessary
You can set start time,
duration, date, repeat
interval, and reminder alarm.
> day
Changing Event Information
Find the Feature
PressTo
1
*
or
#
2
VIEW
(+)display the day view
3
S
4
VIEW
(+)display the event view
M
>
Datebook
scroll to the day
scroll to the event
Datebook
81
PressTo
5
EDIT
(+)edit the event
6
S
7
CHANGE
8
keypad keysenter new information
9
DONE
(+)edit the information
(-)store the information
Copying an Event
Datebook
Find the Feature
PressTo
1
*
or
#
2
VIEW
(+)display the day view
3
S
4
M
open the
5
S
6
SELECT
(+)copy the event
7
YES
(-)confirm the copy
8
keypad keysenter date information
9c(+)
10
DONE
(-)save the copy of the event
11S
scroll to the information you
want to change
M
>
Datebook
scroll to the day
scroll to the event
Datebook Menu
scroll to
Copy
Your phone assumes you
want to change the date, and
displays the
Date
field.
move to month, day, and year
scroll to and edit event
information, if necessary
82
PressTo
12
DONE
(-)store the information
Deleting an Event
Find the Feature
M
PressTo
1
*
or
2
3
4
5
6
7
#
VIEW
(+)display the day view
S
M
open the
S
SELECT
(+)select
YES
(-)confirm the deletion
scroll to the day
scroll to the event
scroll to
>
Datebook
Datebook Menu
Delete
Delete
Datebook
83
Radio
You can use your phone to listen to FM radio
stations when the optional Motorola Original™ FM
Stereo Radio Headset accessory is plugged into
the phone’s accessory connector port.
Turning the Radio On and Off
PressTo
Radio
(+)turn the radio on and off
Alternatively, you can use the following procedure:
Radio
84
Find the Feature
PressTo
On
(+) or
Off
(+)
Note:
The
Radio
menu feature and soft key options appear
only when the FM Stereo Radio Headset is plugged into
the accessory connector port.
M
>
Radio
turn the radio on or off
Tuning a Station
Do ThisTo
Press S
or
scroll to the next frequency
Press and hold S
scroll to the next available
stereo station
Storing a Preset
Do ThisTo
Press and hold a
number key
(
1to9
)
assign its preset number to
the tuned station
Selecting a Preset
PressTo
a number key
(
1to9
)
tune the station stored at the
preset location
Sending and Receiving Calls
With the Radio On
Your phone rings or vibrates as usual to notify you of an
incoming call, message, or other event.
Radio
85
Do ThisTo
Press
IGNORE
(-)ignore the call
Press
ANSWER
or
Press the button on the
FM Stereo Radio
Headset microphone
To end the call and resume the FM broadcast:
Do ThisTo
Press
O
(+)
answer the call
Note:
You can use the
FM Stereo Radio
Headset microphone to
converse with the other
party during a call
end the call
Radio
86
or
Press and hold the
button on the FM Stereo
Radio Headset
microphone
Turn the radio off before dialing outgoing calls from the
phone keypad. You do not have to turn off the radio to dial
emergency numbers, or numbers selected from your
phonebook or recent call lists.
Tip:
To dial a recently called number, press N or the button
on the FM Stereo Radio Headset microphone to go to the
dialed calls list. For more information, see page 63.
Messages—Voicemail
You can listen to your voicemail messages by
calling your network voicemail phone number.
Voicemail messages are stored on the
network—not on your phone.
Storing Your Voicemail Number
Voicemail messages that you receive are stored
on the network. To listen to your messages, you
must call your voicemail phone number.
Note:
Your service provider may include
additional information about using this feature.
Listening to a Voicemail
Message
Find the Feature
The phone calls your voicemail number. If no voicemail
number is stored, your phone prompts you to store one.
M
>
Messages >VoiceMail
Messages—Voicemail
Shortcut:
phonebook entry number 1, you can press and hold
listen to your voicemail message(s).
If your voicemail number is also stored as
1
to
87
Receiving a Voicemail Message
When you receive a voicemail message, your phone
f
displays the
New VoiceMail
PressTo
CALL
The phone calls your voicemail phone number. If no
voicemail number is stored, your phone prompts you to
store one.
(voice message waiting) indicator and a
notification.
(+)listen to the message
Storing Your Voicemail Phone
Number
If necessary, use the following procedure to store your
voicemail phone number. Usually, your service provider
has already done this for you.
Find the Feature
PressTo
1
keypad keysenter your voicemail number
2
OK
(+)store the number
Note:
Messages—Voicemail
88
You cannot store
number. If you want to store your voicemail number with
these characters, create a phonebook entry for it. Then,
you can use the entry to call your voicemail. For more
about these characters, see page 70.
M
M
Pause, Wait
>
Messages
>
VoiceMail Setup
, or n characters in this
Your service provider additionally may store your voicemail
number as phonebook entry number 1, so you can use
one-touch dial to listen to your voicemail messages. If
necessary, see page 68 to store your voicemail number for
one-touch dial access.
Turning Off the Voice Message
Waiting Indicator
To clear the f (voice message waiting) indicator:
Find the Feature
M
M
>
Messages
>
Clear Count
Messages—Voicemail
89
Messages—Text
Text messages are brief messages that you can
send and receive.
Quick notes are pre-written text messages that
you can incorporate into a message and send
quickly.
Your text message inbox must be set up before you can
send and receive messages. The number of messages the
inbox can hold depends on the length of the messages,
and the number of other messages and drafts stored on
your phone.
Setting Up the Text Message
Inbox
Messages—Text
Note:
In many cases, your service provider has already
set up the text message inbox for you.
90
Find the Feature
PressTo
1
2
3
4
CHANGE
S
SELECT
DONE
(+)change the
(+)select the cleanup setting
(-)save the inbox settings
M
M
scroll to the number of days
you want to keep messages
in the inbox, or the number of
messages you want to keep
>
Messages
>
Inbox Setup
Cleanup
setting
Receiving a Text Message
Note:
Your text message inbox must be set up before you
can receive text messages. See page 90.
When you receive a text message, your phone displays the
i
(message waiting) indicator and a
notification, and gives an alert.
PressTo
READ
(+)open the message
New Inbox Message
If reminders are turned on, your phone sends a reminder
at regular intervals until you close the new message
notification, read the message, or turn off your phone (see
page 108).
When your phone displays
delete some existing messages to receive new messages.
Memory is Full!
, you must
Reading, Locking, or Deleting a
Text Message
Messages in the text message inbox are sorted from
newest to oldest. The oldest messages are deleted
automatically as specified by the inbox cleanup setting
(see page 90). If you want to save a message, you should
lock it to prevent it from being deleted during cleanup.
Find the Feature
M
>
Messages >Inbox
91
Messages—Text
PressTo
S
1
2
READ
(+)open the message
3
BACK
(-)
Messages—Text
or
DELETE
or
M
(+)
scroll to the message
The following indicators show
message status:
h
= unread
n
= unread (with attachment)
k
= unread and urgent
m
= unread and urgent
(with attachment)
j
=read
l
= read (with attachment)
{
= read and locked
o
=read and locked
(with attachment)
close the message
delete the message
open the
other procedures as described
in the following list
Inbox Menu
to perform
92
The
Inbox Menu
OptionDescription
Create Message
can include the following options:
Open a new text message.
OptionDescription
Call Back
Go To
Reply
Forward
Lock/Unlock
Delete
Delete All
Inbox Setup
Call the number in the message
header or embedded in the
message.
Launch the micro-browser and go
to a Web address (URL)
embedded in the message.
Open a new text message, with
the sender’s
email address in the
Open a copy of the text message,
with an empty
Lock or unlock the message.
Delete the message.
Delete all inbox messages.
Open the text message inbox
setup menu.
Reply To
To
field.
number or
To
field.
Storing Pictures, Animations,
and Sounds
Text messages that you receive can contain
pictures, animations, and sounds. Pictures and
animations are displayed as you read the
message. A sound begins playing when you
open the message text and select the
*
indicator by pressing
You can store these embedded object files on your phone,
and use them as screen saver images and alert tones.
and #.
p
(sound file)
Messages—Text
93
Store a Picture or Animation File
PressTo
S
1
2
M
open the
3
S
4
SELECT
(+)display a list of items you can
5
S
6
SELECT
(+)display the file name
1
STORE
(+)view storage options
2
S
3
SELECT
(+)store the file and, optionally,
Messages—Text
For more information about using pictures and
animations, see pages 77 and 131.
highlight the picture or
animation in the message
scroll to
store
scroll to
scroll to
Set as Screen Saver
set it as your screen saver
image
Store a Sound File
Inbox Menu
Store
File Attachment
Store Only
, or
You can store a sound file, and set it as an event alert.
PressTo
highlight the
indicator in the message
Inbox Menu
scroll to
Store
94
1
2
3
S
M
open the
S
p
(sound file)
PressTo
4
SELECT
(+)display a list of items you can
store
5
6
7
8
9
S
SELECT
(+)display the file name
STORE
(+)view storage options
S
SELECT
(+)select the option
scroll to
scroll to
Set As Ring Tone
File Attachment
Store Only
or
If you select
procedure is complete.
If you select
Tone
, your phone displays
Set As Which?
events for which you can set
an alert.
10S
11
SELECT
(+)store the sound and set it as
For more information about using sound files, see
pages 101 and 103.
scroll to the event
the event alert
Store Only
Set As Ring
, and lists the
, the
Sending a Text Message
You can send a text message to one or more recipients.
You can manually enter each recipient’s phone number or
email address, or select numbers/addresses from the
phonebook or recent call lists.
Messages—Text
95
Note:
When you manually enter numbers and/or email
addresses, you must insert a space between each entry.
Press
1
one time, wait for the space to appear, then
enter the next number or email address.
Find the Feature
M
>
Messages
>
Create Message
PressTo
1
CHANGE
2
keypad keys
(+)select
enter one or more phone
To
numbers and/or email
addresses
Tip:
Press 1 to insert a
space between each
number/address that you
enter manually.
Messages—Text
or
BROWSE
(+)
select numbers/addresses
from the phonebook or recent
call lists as follows:
aS
b
SELECT
cS
d
ADD
(+)
(+)
highlight
Calls
select the list
highlight a number/address
add the number/address to
Phonebook, Received
, or
Dialed Calls
the list of message recipients
e
DONE
(-)
return to the message editor
when you are finished
96
PressTo
3
OK
(+)store the numbers/addresses
4
CHANGE
5
keypad keys
(+)select
Msg
enter the message
Note:
Message length is
limited. As you near the limit,
a display counter shows how
many characters are left.
or
BROWSE
(+)
select and insert a quick note
message (see page 98)
6
keypad keysenter the message
Note:
Message length is
limited to seven (7) pages of
1000 characters each. A
display counter cycles
between the number of pages
written (number preceded by
a *), and the number of
characters left on the current
page.
or
BROWSE
(+)select and insert a quick note
message (see page 98)
7
OK
(+)store the message
8
9
10
CHANGE
S
SELECT
(+)select
scroll to the priority you want
(+)set the priority
Priority
Messages—Text
97
PressTo
11
CHANGE
12
keypad keysenter a number for the
13OK(+)store the number
14
DONE
15
YES
NO
(+)select
(-)finish the message
(-)
or
(+)
Call
recipient to call back
Your phone displays the total
pages in the message.
send the message
cancel the message or save it
in the drafts folder
Sending a Quick Note Text
Message
Messages—Text
Quick notes are pre-written text messages that you can
incorporate into a message and send quickly (for
example,
notes.
on my way
). You can also create new quick
98
Find the Feature
PressTo
S
1
M
scroll to the quick note
>
Messages
>
Quick Notes
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.