Mossloo XJ0817 User Manual

Cylinder Bluetooth®

Speaker

Instruction Manual

XJ0817

What’s included:

1 x Cylinder Speaker
1 x USB to Micro-USB charging cable
1 x Instruction Manual

LED Indicator

Charging: Glowing Red LED

•
Charging Complete: Red LED off

•

•

Pairing Name: “Cylinder Speaker”

•

Battery capacity: 300mAh

•

Listening Time (at max vol): 1 hour

•

Charging Time: 1.5 hours

Instructions:

1.

Charging the speaker:

a

Using a Regulat ed USB Adapter:

•

Connect the provided USB cable to a
regula ted USB adapter.

•

Connect the oposite, Micro-USB end of the
cable to the charging port on the speaker.

•

Plug the USB adapter into the outlet to
begin charging.

b.

Using a Comput er:

•

Connect a USB cable to a USB outlet on
your computer.

*

Make sure the computer is on to begin
charging the speaker.

2.

Connecting the speaker with Bluetooth:

a.

Turn ON the power switch

•

Once on, the speaker will enter Bluetooth
pairing mode.

•

Using a Bluetooth enabled device, search
for “Cylinder Speaker” from the list of
available options.

3.

Using the Speaker:

•

Use the audio device to control track
selection and volume

*

Note: In order to charge device use only
accessory cable (provided with device) or
the cable included with your own device by
the manufacturer.

SAFETY PRECAUTIONS:

•

WARNING–When using this product, basic
precautions should always be followed,
including the following:

1.

Read all the instructions before using the
product.

2.

Charge the speaker completely before
initial use for best practices.

3.

If the device does not respond once it
is powered on, the battery capacity may

4.

be low. Do not over charge the internal

5.

battery.
Do not immerse into water or expose it to

6.

moisture or weather conditions.
Do not drop, knock, or shake. Rough
handling can damage the internal precision

7.

component and its boards.
Keep away from children, this device is

8.

not a toy.

heat. Expose to high temperatures may
cause it to explode.

9.
Do not short-circuit, as this may cause
damage to the unit.

10.

may void your right to use this product.

11.
While using, always comply with any
special regulations that may apply to the
area you are in and always turn off your
mobile device when its use is prohibited.

FCC Statement:

This device complies with Part 15 of the

•
FCC Rules. Operation is subject to the
following two conditions:
This device may not cause harmful

(1)

interference, and
This device must accept any interference

(2)

received, including interference that may
cause undesired operation.

Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
inaccordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception,which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and
receiver.

-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician
for help.
To maintain compliance with FCC’s RF Exposure guidelines,
This equipment should be installed and operated with
minimum 20cm distance between the radiator your body:
Use only the supplied antenna

MADE IN CHINA