Mossloo MSLW195Q User Manual

FCC ID:2AN8F-MSLW195Q

Swift Universal 10000 mAh

Wireless Power Bank

Instruction Manual

7121-63

Features:

1.

ON/OFF button

2.

LED Indicator

3.

Wireless Output Pad

4.

Type C Output

5.

2-in-1 Output

6.

Micro-USB Input

7.

USB A Input

8.

Wireless Input Pad

What’s included:

1 x 10000 mAh Power Bank
1 x Instruction Manual

Tech Specications

Micro Input: 5V 2A

•
2-in-1 Output: 5V 2A

•
Type C Output: 5V 2A

•
Wireless Input: 5V 0.8A

•
Wireless Output: 5V 1A

•

LED Indicators:

ON/OFF Button: Press once to view the

•
remaining power capacity.
LED indicator will show Green once the

•
Power bank is on wireless charging standby
mode.

Instructions:

Charging the power bank:

1.
Charge the power bank fully before usage.

a.
b.

nsert the USB A input

I

AC adapter or USB port of a computer, the
charge will begin.

LED indicator will ash BLUE when

c.

charging, and will stop once fully charged.

d.

To Wireless Charge the power bank, place
the power bank(8) on a wireless charging pad
/surface,

power bank will ash BLUE when

charging and will stop once fully charged.

Charging mobile phones and other

2.

electronic devices:

Connect the 2-in-1 Output(5) or Type C

a.

Output(4) to your electronic device, it
would be charged

Android device: The tip with pins upwards;
iOS device: The tip without pins upwards.

Remove the USB cable from your mobile

b.

device when it is fully charged.

Charging Mobile phones and other

3.

electronic devices with wireless output.

Place wireless charging enable device on

a.

Wireless Charging surface(3). The device will
begin to charge with LED indicator will turn
RED.

Note: In order to charge devices, use only

*

the accessory cable or the cable included
with your own device by the manufacturer.

into a certied USB

(7)

automatically.

SAFETY PRECAUTIONS:

WARNING-When using this product, basic

•
precautions should always be followed:
Read all the instructions before use.

1.
Never store or use this product in

2.
temperatures below 32°F (0°C) or above
115°F (45°C).
Do not overcharge your phone. The

3.
unit may become hot under excessive
use. Remove your phone once it is fully
charged. Never charge your phone for
more than 7 hours at a time.
The unit will only achieve full performance

4.
after 2 or 3 completed charge and
discharge cycles.
To reduce the risk of injury, close

5.
supervision is required when the product is
used near children.
Do not expose the device to moisture.

6.
Do not use the device in excess of its

7.
output rating. Overload outputs above the

rating may result in a risk of re or injury.

Do not use the device if damaged or

modied.
Damaged or modied batteries may exhibit

8.

unpredictable behaviour resulting in re,

explosion or risk of injury.
Do not disassemble the device. For

9.

repairs, seek a qualied service

professional. Incorrect reassembly may

result in a risk of re or injury.

10.

Do not expose the device to re or
excessive temperatures. Exposure to re

or temperatures above 104°F (40°C) may
result in explosion.
To ensure product safety, ensure that

11.

qualied service professionals use only

identical replacement parts.

12.

Attachments on the back of your phone

can impede the effectiveness of the
wireless charger, and lead to overheating.
Please remove attachments from the phone
before charging on this device.

Warning:

*

Changes or modications not expressly

approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.

WIRELESS CHARGING ENABLED
DEVICES:

Apple iPhone: 8, 8 Plus, X, Xs, Xs Max, XR.

Samsung Galaxy: Note 9, S9, S9+, Note 8,
S8, S8+, S7, S7 Edge, Note 5, S6, S6 Edge
Sony: Xperia XZ3, Xperia XZ2 Premium,
Xperia XZ2
LG: G7 ThinQ, V30, G6 (US version only), G4
(optional), G3 (optional)
Nokia: 8 Sirocco
Huawei: Mate RS Porsche Design

Microsoft Lumia: 1520, 1020, 930, 929,
928, 920

Google Nexus: 4, 5, 6, 7 (2013)

MADE IN CHINA

FCC statements:

Federal Communication Commission (FCC) Radiation Exposure Statement

When using the product, maintain a distance of 20cm from the body to ensure compliance with

RF exposure requirements.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications or changes to this equipment. Such modifications or changes could
void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into

an outlet on a circuit different from that to which the receiver is connected.

‐Consult the dealer or an experienced radio/TV technician for help.