Morphy Richards Redefine Instruction Manual

Instruction
manual

Please read and keep these
instructions for future use

KT131000 MUK REV7

KT131004 MUK REV1.indd 3 18/02/2015 10:34

this is where the similarity ends

this is where the exceptional begins

... the premium, highly innovative Morphy Richards product group.

Driven by principles of innovation and providing exceptional quality, the

Redefine range is designed to fulfil the consumer need for brilliantly performing

products that have equal aesthetic consideration.

KT131004 MUK REV1.indd 1 18/02/2015 10:34

2

Location

• Always locate your appliance away from the edge of the
worktop.

• Ensure that the appliance is used on a firm, flat surface.

• Do not use the appliance outdoors or near water.

• WARNING: Do not place the appliance onto a metal tray or
metal surface whilst in use.

Mains cable

• Do not let the mains cable hang over the edge of the
worktop where a child could reach it.

• Do not let the mains cable run across an open space e.g.
between a low socket and a table.

• Do not let the mains cable run across a cooker or other hot
area which might damage the cable.

• The mains cable should reach from the socket to the base
unit without straining the connections.

Personal safety

• WARNING: To protect against fire, electric shock and
personal injury do not immerse cord, plug and appliance in
water or any other liquid.

• Unplug from the outlet before cleaning.

• Allow to cool before putting on or taking off parts and
before cleaning.

Health & Safety

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

• This appliance can be used by children aged from 8 years and above if

they have been given supervision or instruction concerning the use of the
appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall
not be made by children unless they are older than 8 and supervised.

• Appliances can be used by persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.

• Children shall not play with the appliance.

• If the mains cable is damaged, it must be replaced by the manufacturer,

it’s service agent or similarly qualified person in order to avoid a hazard.

• This appliance is intended to be used in household and similar
applications such as: farm houses, by clients in hotels, motels and other
residential type environments, bed and breakfast type environments. It
is not suitable for use in staff kitchen areas in shops, offices and other
working environments.

Other safety considerations

• The use of attachments or tools not recommended or sold
by Morphy Richards, may cause fire, electric shock or injury.

• Do not use the appliance for any use other than to boil
water.

• Do not place the appliance on or near a hot gas or electric
burner or in a heated oven.

• The Water Tank must not be in the Main Unit when being
filled with water.

• Unplug from the outlet when not in use.

• WARNING: The appliance must not be immersed for
cleaning.

• CAUTION: To prevent damage to the appliance, do not use
alkaline cleaning agents when cleaning. Use a soft cloth
and detergent.

Electrical requirements

• Check that the voltage on the rating plate of your appliance
corresponds with your house electricity supply which must
be A.C. (Alternating Current).

• Should the fuse in the mains plug require changing, a 13
amp BS1362 fuse must be fitted.

• WARNING: This appliance must be earthed.

KT131004 MUK REV1.indd 4 18/02/2015 10:34

19

20

21

23

13 14

15

16

17

18

7

7

22

8

9

10

11

12

1

1

2

2

3

3

4

4

5

5

6

1 Start / Stop Button

Starts and pauses the heating process. Can also be
used to pause dispense while in progress and put the
Hot Water Dispenser into standby mode.

2 Water Volume Dial

Controls the volume of water to be heated and
dispensed. Volume is displayed on the LCD screen (15).

3 LCD Screen

Displays volumes, temperatures, functions, and
warnings.

4 Temperature Button

Adjusts the temperature of dispensed water, turns
sounds on and off.

5 Dispense Button

Switches the Auto Dispense feature on and off.

6 Dispense Nozzles

7 Water tank

Contains the BRITA MAXTRA Cartridge 19, BRITA Memo

20 and BRITA Hopper 21.

8 Drip Tray

9 Drip Tray Cover

10 Drip Tray Indicator

‘Full’ icon indicates when the Drip Tray needs to be
emptied.

11 Heat Icon

Displays when the heat cycle is in process.

12 Water Tank Icon

Displays when the tank needs to be refilled.

13 Dispense Icon

Displays when water is ready for dispense.

14 Auto Dispense Icon

Displays when the auto dispense feature is enabled.

15 Dispense Volume Display

Displays the volume of water to be heated and
dispensed.

16 Descale Icon

Displays when the Hot Water Dispenser requires
descaling.

17 Temperature Icon

Displays the temperature the water will be heated to
prior to dispense.

18 Standby Light

19 BRITA MAXTRA Cartridge

20 BRITA MEMO

Monitors the life of the MAXTRA Cartridge.

21 BRITA Hopper

22 Water Level Sensor

23 Main Unit

KT131004 MUK REV1.indd 6 18/02/2015 10:34

3

Place a vessel underneath the Dispense Nozzles

(6) and press the Dispense Button (5) to reset the

system. This takes approx. 35 seconds. Any water
dispensed during resetting should be discarded.

5

Press the Start/Stop Button (1), the Hot Water

Dispenser will pump 240ml of water into the
heating chamber and start to heat.

4

Using the Water Volume Dial (2), adjust the

Dispense Volume (15) to 240ml. Place a cup on the
Drip Tray (8) under the Dispense Nozzles (6).

6

When heated the water will automatically

dispense from the Dispense Nozzels (6) into your
cup.

1

Remove the Water Tank (7) from the Main Unit

(23). Remove the BRITA MAXTRA Cartridge (19) and

BRITA Hopper (21) from the Water Tank.

2

Fill the Water Tank with cold water and return to

your Hot Water Dispenser. Plug your Hot Water
Dispenser into the electrical socket.

Quick
Start
Guide

This quick start guide shows you the basic steps
for dispensing 240ml of hot water for a single
cup of tea or coffee. This quick start guide does
not detail the steps to use the BRITA Filtration
System.

For more detailed information on using your
new Hot Water Dispenser or BRITA Filtration
System, please read this instruction manual.

KT131004 MUK REV1.indd 7 18/02/2015 10:34

4

Resetting
The System

Before using your Hot Water Dispenser for the
first time, or after it has been unplugged from
the mains. You must perform the following steps
to reset your Hot Water Dispensers’ heating
chamber.

Your Hot Water Dispenser will not function
if the system has not been reset.

3

Place an empty vessel, such as a measuring jug

or saucepan underneath the Dispense Nozzles (6).

4

Press the Dispense Button to reset the system.

Any remaining water will be dispensed from the
system into the vessel below. This takes
approximately 35 seconds. It is now ready for use.

2

The Dispense Button (5) will flash and the

‘Dispense Icon’ (13) will appear on the screen.

1

Plug your Hot Water Dispenser into the mains

outlet and switch on at the socket.

35

seconds

KT131004 MUK REV1.indd 8 18/02/2015 10:34