Morphy richards PROFESSIONAL BLENDER AND MILL user Manual

Professional blender & mill

Please read and keep these instructions

getting the best from your
new blender...

www.morphyrichards.co.uk

• Safety first

The blender blades are very sharp, therefore handle with care
when using and cleaning.

• Quantities

Do not overfill the blender. Refer to the operating chart for
quantities and operating times.

• Ensure the blender lid is in place

When using the blender ensure the lid is in place before switching
on and do not remove until the blades have stopped rotating.

• Operation

Ensure that the jug base is fully screwed onto the jug or the
product will not switch on due to a built in safety feature.

48493 Rev 1 2/3/04 12:42 PM Page 1

Important safety
instructions

The use of any electrical appliance
requires the following of basic common
sense safety rules.

Primarily there is danger of injury or death
and secondly the danger of damage to the
appliance. These are indicated in the text by
the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance!

In addition we offer the following
essential safety advice.

Location

• Remove all packaging and retain for

future reference.

• Ensure the blender is used on a firm, flat

surface.

• Do not use the blender outdoors or in a

bathroom.

• Do not place the blender on a highly

polished wooden surface as damage may
occur to the surface.

• Do not place the blender on or near a hot

surface such as a hot plate or radiant
rings or near a naked flame.

• Do not let the mains lead overhang the

edge of the table or work-top, or touch
hot surfaces.

• Do not place the appliance on or near a

hot gas or electric hob, or in a heated
oven.

Personal safety

•WARNING: To protect against risk of

electric shock NEVER immerse the
blender body in water or in any other
liquid and always ensure the
electrical connections are kept dry.

•WARNING: The blender blades are

sharp. Handle with care when using
and cleaning.

•WARNING: Keep hands and utensils

out of the blender when it is
switched on.

• Allow hot liquids to cool before blending,
always ensure the lid is fitted correctly.

•WARNING: Avoid touching moving
parts. Keep hands, hair, clothing as
well as spatulas and other utensils
away from blender blades during
operation, to prevent personal injury
and/or damage to the appliance.

Children

• Children do not understand the dangers
associated with operating electrical
appliances. Never allow children to use
this appliance.

Other safety considerations

• Disconnect the blender from the mains
supply when not in use, before taking off
attachments and before cleaning.

• Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been
damaged in any manner. Ring the helpline
number for advice on examination and
repair.

• The use of attachments or tools not
recommended or sold by Morphy
Richards may cause fire, electric shock or
injury.

• Do not use the blender for anything other
than its intended use.

• Do not overfill the blender. This could
cause damage to the motor. The 3 amp
fuse will blow if the blender is overloaded.
Replace the fuse and do not exceed the
maximum recommended volumes. Refer
to the operating chart.

• Do not blend for longer than the time
periods recommended in the operating
chart.

• When using the blender ensure the lid is
in place before switching on and do not
remove the lid until the blade has stopped
rotating.

2

48493 Rev 1 2/3/04 12:42 PM Page 2

3

Electrical requirements

Check that the voltage on the rating plate
of your appliance corresponds with your
house electricity supply which must be A.C.
(Alternating Current).

If the socket outlets in your home are not
suitable for the plug supplied with this
appliance, the plug should be removed and
the appropriate one fitted.

WARNING: The plug removed from
the mains lead, if severed, must be
destroyed as a plug with bared flexible
cord is hazardous if engaged into a live
socket outlet.

Should the fuse in the 13 amp plug
require changing, a 3 amp BS1362 fuse
must be fitted.

WARNING: This appliance must be
earthed.

Unpacking your blender

Carefully unpack your blender, as the
blades are very sharp.

Remove any stickers (except for serial
label) and wash all the parts that are safe to
immerse in water.

WARNING: Never immerse the
blender body in water or in any other
liquid and always ensure the electrical
connections are kept dry.

This may be wiped with a clean, damp
cloth. But only when unplugged from the
electrical socket.

Blender use

Use your blender for soups, sauces,
drinks, pates, mayonnaise, dressings etc.

Your blender can also be used for
crushing ice for cocktails, desserts etc.

Mill use

Use mill attachment to grind coffee
beans, nuts, spices etc.

Features

⁄ Filler cap
¤ Lid
‹ Glass jug
› Blade and seal assembly
fi Jug base
fl Blender base unit
‡ Control switch

· Ice crush button
‚ Mill jar
„ Mill base

⁄

¤

‹

›

fi

fl

‡

·

‚

„

48493 Rev 1 2/3/04 12:42 PM Page 3