Morphy Richards Precise Steam Iron User Manual
w
www.morphyrichards.com
Precise Steam Iron
steam/spray shot
Please read and keep these instructions
GGeettttiinngg tthhee bbeesstt ffrroomm yyoouurr nneeww iirroonn........
Safety first
Caution must be used when handling this appliance as it
does get very hot. Always switch off the unit and allow to
cool before cleaning or storing.
Self cleaning button
Your iron will give the best ironing results and will last longer
if you use the self clean feature at least once a month.
RN40725 Rev 3
For replacement parts, help with using your Morphy Richards,
problems and lots more, contact us by phone or through our website.
UK Helpline: 0870 060 2615
Replacement parts: 0870 167 6646
Ireland 1800 409119
40725 rev3 14/8/06 14:02 Page 1
2
2
IMPORTANT
SAFETY
INSTRUCTIONS
The use of any electrical
appliance requires the
following common sense
safety rules.
Primarily there is danger of
injury or death and
secondly the danger of
damage to the appliance.
These are indicated in the
text by the following two
conventions:
W
WARNING: Danger to
the person
IMPORTANT: Damage to
the appliance! In addition
we offer the following
safety advice.
Location
• Do not use outdoors.
Mains lead
• Do not allow the mains
lead to become strained or
run this appliance over it.
• If the electrical cable
becomes damaged the
cable assembly must be
replaced. Do not attempt
this task yourself, contact
the helpline number that is
found at the bottom of the
page.
Personal safety
•• WARNING: Burns can
occur from touching
hot metal parts, hot
water or steam. Use
caution when you turn
a steam iron upside
down, there may be
hot water in the water
tank.
• WARNING: To protect
against the risk of
electric shock do not
put the appliance in
water or in any other
liquid.
• Do not use the vertical
steam feature on clothes
that are being worn.
• Do not leave the iron
unattended whilst plugged
in or on an ironing board.
Never allow the mains lead
to over hang the work
surface.
• The socket should always
be off before plugging or
unplugging from the
socket. Never yank the
cord to disconnect from
the socket, instead, grasp
plug and pull to
disconnect.
• Do not allow the cord to
touch hot surfaces. Let the
iron cool completely before
putting away. Loop cord
loosely around the iron
before storing.
• The iron must be used and
rested on a stable surface
• When placing the iron on
its heel, ensure that the
surface on which the iron is
placed is stable.
• The iron is not to be used if
it has been dropped, if
there are visible signs of
damage or if it is leaking.
Other safety
considerations
• Use the iron only for its
intended use.
• Always disconnect the iron
from the electrical socket
when filling with water or
emptying, and when not in
use.
• Do not operate the iron
with a damaged cord or if
the iron has been dropped
or damaged. To avoid the
risk of electric shock, do
not disassemble the iron,
but telephone Morphy
Richards for advice.
Incorrect reassembly can
cause a risk of electric
shock when the iron is
used.
Children
• Close supervision is
necessary when any
appliance is used near
children.
Special
instructions
• If your iron does not work,
check the following points:
Has the temperature
control been set to the
required temperature? Is
the plug in its socket? Is
the plug itself or the socket
faulty? (Check by plugging
in another appliance).
•
W
WARNING: When not in
use, your iron should
never be placed flat
and left on an ironing
board.
• To prevent damage to the
textile being ironed, follow
the temperature guide
carefully. (Test the inside of
the hem of the garment).
• When ironing is complete,
turn off the steam selector
switch, remove the plug
from the socket, empty any
remaining water from the
tank, and allow to cool
before storage.
• If you drop or severely
knock your iron this could
cause internal damage
even if the outside appears
alright. Have it checked by
a qualified electrician.
• It is recommended that you
use up one beaker of water
by operating your iron’s
steam and shot of steam
functions before ironing any
clothes as some dripping
may occur while your irons
steam system is activated.
UUK Helpline 0870 060 2615 Replacement Parts 0870 167 6646 Ireland Helpline 1800
409119
40725 rev3 14/8/06 14:02 Page 2
Electrical
requirements
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating current).
If the socket outlets in your
home are not suitable for the
plug supplied with this appliance
the plug should be removed and
the appropriate one fitted.
W
WARNING: The plug
removed from the mains
lead, if severed, must be
destroyed as a plug with a
bared flexi
ble cord is
hazardous if engaged into
a live socket outlet.
Should the fuse in the 13 amp
plug require changing a 13 amp
BS1362 fuse must be fitted.
WWARNING: This appliance
must be earthed
www.morphyrichards.com
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
Symbol
(120°C Max) Cool
(160°C Max) Warm
(210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing
Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank
Dry and spray
Steam/spray/
shot of steam
Without water in tank
Dry ironing
‘Max setting’
Self clean
INSTRUCTIONS FOR USE
33
Temperature guide
40725 rev3 14/8/06 14:03 Page 3
Loading...