Morphy Richards 300002, perfecttemp Owner's Manual
Steam iron
steam/spray/shot/press
Please read and keep these instructions
Getting the best from your new iron....
Safety first
Caution must be used when handling this appliance as it does get very
hot. Always switch off the unit and allow to cool before cleaning or storing.
If you have a problem or complaint, please call our dedicated UK based helpline
before returning your product to the retailer from where it was purchased.
UK Helpline: 0844 871 0960
Replacement Parts: 0844 873 0726
Ireland Helpline: 1800 409 119
!
To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.
RN300002 MUK Rev1
* Register online for your 3 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)
www.morphyrichards.co.uk/blog
For competitions, product hints and tips
and more join us at
www.facebook.com/morphyrichardsuk
@loveyourmorphy
Self-clean
Your iron will give the best ironing results and will last longer if you clean
the soleplate once a month, see ‘Maintenance’ on pages 6.
RN300002MUK Rev1_Instruction Booklet 21/01/2014 10:46 Page 1
2
UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119
IMPORTANT SAFETY INSTRUCTIONS
•
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience or knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the
hazards involved.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made
by children without supervision.
•
Keep the iron and its cord out of reach of children
less than 8 years of age at all times.
•
The iron must not be left unattended while it is
connected to the supply mains.
•
The plug must be removed from the socket before
being filled with water.
•
The iron must be used and rested on a stable
surface.
•
When placing the iron on its heel, ensure that the
surface on which the heel is placed is stable.
•
The iron is not to be used if it has been dropped, if
there are visible signs of damage or it is leaking.
•
The filling aperture must not be opened during use.
•
CAUTION - HOT: Burns can occur from
touching hot parts, hot water or steam.
• WARNING: To avoid electric shock, do not
immerse appliance in water / liquid.
Electrical requirements and mains cable
• Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating current).
• Do not operate with a damaged supply cord or
grommet, it must be replaced by the manufacturer,
its service agent or similarly qualified person in
order to avoid a hazard.
• Do not let the mains lead come into contact with
the hot soleplate of the iron.
• Should the fuse in the mains plug require changing,
a 13 amp BS1362 fuse must be fitted.
• WARNING: This appliance must be earthed.
PLEASE READ ALL INSTRUCTIONS AND KEEP
FOR REFERENCE
RN300002MUK Rev1_Instruction Booklet 21/01/2014 10:46 Page 2
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
Symbol
(120°C Max) Cool
(160°C Max) Warm
(210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing
Iron on wrong side,
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank
Dry and spray
Steam/spray/shot of steam
Without water in tank
Dry ironing
INSTRUCTIONS FOR USE
3
Temperature guide
Self clean
‘Max’ Setting
For details of other Morphy Richards products, please see our website:
COMPONENTS
OF YOUR IRON
⁄ Variable steam dial
¤ Shot of steam button
‹ Water spray button
› Filling hole with cap
fi Spray nozzle
fl Soleplate
‡ Self-Clean button
· Temperature console
‚ Illuminated water tank
„ Auto shut-off indicator
‰ Life long anti-scale
(certain models only)
 Filling beaker
Soleplate
Ê Stubborn crease boost
for hard to reach creases
Á Constant Steam
relaxes fibres for easy
crease removal
Ë Pressing plate
removes excess water to
avoid re-creasing
fl
·‚
‰
„
⁄ ¤‹
›
fi
‡
400
350
300
Â
The tank
holds 350ml
of water, fill
the beaker
to the 350ml
line.
Á
Ê
Ë
RN300002MUK Rev1_Instruction Booklet 21/01/2014 10:46 Page 3
Loading...