Grimebuster instant steam cleaner
Please read and keep these instructions
www.morphyrichards.co.uk
getting the best from your
new cleaner...
•A CD Rom User Guide is provided with this product.
No steam
• Check the power supply.
• Check the heater switch is set to I and the steam switch is on .
• Check the safety lock on the hose handle is off.
• Check water is in the tank.
• Remove and refit the tank to ensure it is fitted correctly.
Anti-scale cartridge filter
•To prevent scale build up the anti-scale filter must be replaced
regularly. See page 7 for details. A spare anti-scale sleeve is
included.
WARNING: If the cleaner is lifted, a small volume of steam
may be emitted, even after switch off. Direct the hose safely
at all times.
WARNING: Do not use any de-scaler solutions in this
product.
Replacement filters can be purchased from our replacement parts
line 0870 167 6635.
70460 Rev 2 10/8/04 10:44 AM Page 1
Important safety
instructions
The use of any electrical appliance
requires the following common sense safety
rules.
Primarily there is danger of injury or
death and secondly the danger of damage
to the appliance. These are indicated in the
text by the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance!
In addition we offer the following safety
advice.
Location
• Do not use or keep this product outside
when it is raining.
• Do not store the appliance near hot
ovens or heating appliances.
Children
• Children do not understand the dangers
associated with operating electrical
appliances. Never allow children to use
this appliance.
Personal safety
•WARNING: If the cleaner is lifted, a
small volume of steam may be
emitted, even after switch off.
Direct the hose safely at all times.
• The plug should be removed from the
wall socket before cleaning, filling or
changing the accessories.
•WARNING: To protect against fire,
electric shock and personal injury
do not immerse cord, plug or
cleaner in water or other liquid.
• The accessories get very hot. Allow to
cool before changing.
• Make certain the steam has stopped
before changing the accessories or
putting the handle aside.
• Do not discharge the steam towards
people. Danger of scalding.
• Never touch the plug or cable with wet
hands.
• Never modify the cleaner in any way.
• When using the machine always keep it
horizontal.
• Steam must not be directed towards
equipment containing electrical
components, such as the interior of
ovens.
Other safety considerations
• Do not use any chemical detergents,
perfumes, alcohol etc in water.
• Repairs to electrical appliances are only
to be undertaken by trained personnel.
Unprofessional repairs can be dangerous
for users.
• Use only genuine Morphy Richards spare
parts and accessories.
• If the electrical cable becomes damaged
the complete cable assembly must be
replaced. Do not attempt this task
yourself, contact Morphy Richards using
the replacement parts number on the
front of this leaflet.
• The appliance must never be left running
when unsupervised.
• This steam cleaner is intended for
domestic use only. Misuse or use for
commercial or any other purpose will
render the guarantee invalid.
• Never modify the cleaner in any way.
Electrical requirements
Check that the voltage on the rating
plate of your appliance corresponds with
your house electricity which must be A.C.
(alternating current).
If the socket outlets in your home are
not suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
WARNING: The plug removed from
the mains lead, if severed, must be
destroyed as a plug with a bared
flexible cord is hazardous if engaged
into a live socket outlet.
WARNING: This appliance must be
earthed.
Should the fuse in the 13 amp plug
require changing a 13 amp BS1362 fuse
must be fitted.
2
70460 Rev 2 10/8/04 10:44 AM Page 2
Features
⁄ Handle control steam trigger
¤ Safety locking mechanism
‹ Release button
› Tank latch
fi Removable water tank
fl Removable anti-scale filter
‡ Carrying handle
· Heater switch
‚ Steam switch
„ Hose inlet socket
‹
fi
fl
‡
‚
3
„
Illustration
Accessories you should have
‰ Flexible hose
 Handle with steam control
Ê Extension tubes x 2
Á Cotton towel x 2
Ë Large floor brush
È Brush connector
Í Jet nozzle
Î Plastic brush
Ï Brass brush
Ì Triangular upholstery nozzle
Ó Cotton sock for upholstery nozzle
Ô CD Rom user guide
Bag for accessories (not shown)
›
A
·
⁄
¤
‰
Â
Ê
Á
Ë
È
Í
Î
Ï
Ì
Ó
Ô
70460 Rev 2 10/8/04 10:44 AM Page 3
Operation
Please remember that the steam cleaner
operates by emitting steam at an increased
temperature of 120˚C. Never use it on
objects or surfaces which cannot resist this
temperature, delicate materials, dralon,
plastic, natural fur etc. Where any doubt
exists check carefully on a part of the
material where minor marks will not matter.
Filling the water tank
1 To fill, release the tank latch B and slide
the tank backwards from the rear of the
cleaner. C.
2 Remove the anti-scale cartridge filter D
by lifting upwards.
3 Fill to the 'max' line with water E.
4 Replace the filter carefully, push fully
down then re-fit the tank into the back of
the machine closing the tank latch
securely to lock the tank into place F.
WARNING: Do not use any
detergent.
On/off switch
1 When the water tank has been filled,
insert the plug into the power socket.
2 Switch the cleaner on by pressing the
heater switch · to 'I' G. The switch will
illuminate and the boiler will take 60
seconds to heat up. The cleaner is ready
to use when the heater switch light goes
out.
Note: the heater switch light will go on
and off during use. This is to keep the
steam at the correct temperature.
4
B
C
D
E
F
G
70460 Rev 2 10/8/04 10:44 AM Page 4
5
3 Switch the steam switch ‚ to on and
this will now illuminate.
Steam trigger
WARNING: At the start water may
be ejected. Aim the steam safely. Start
by releasing the steam into a bucket
or sink.
1 Ensure the safety lock ¤ is off. When
the lock is pushed towards the rear the
trigger cannot be activated. Push the
lock forward to release the steam trigger.
2 When you press the steam trigger, steam
will be emitted from the nozzle. H
3 There will be an initial delay of a few
seconds before the water reaches the
boiler. This delay is indicated by the
pump noise and reduces as water enters
the system.
IMPORTANT: On the first use it may take
up to 30 seconds before steam is released.
If steam is not released within 30 seconds
remove and refit the tank, then re-try.
4 Keep the steam trigger pressed and
direct the steam at the surface to be
cleaned, removing the dirt by moving the
steam jet backwards and forwards over
the area.
5 To stop the steam jet, release the steam
trigger.
There will be a delay before the steam
ceases as the remaining water in the
system is expelled.
WARNING: This is normal. Make
sure the steam nozzle is safely
held/located during this period.
6 When the water reaches a low level the
pump will click, this is due to air being
pumped instead of water. Stop using the
appliance, locate the steam nozzle in a
safe location and refill the tank. It is not
necessary to wait for the appliance to
cool down.
IMPORTANT: If the pump is run dry for a
long period it may become air blocked. If
this happens, switch off or leave the unit to
fully cool before re-trying.
Attaching tubes
and handle
WARNING: Allow all parts to cool
and make certain steam has stopped
before attempting to fit or change any
accessories.
1 Pull the flap down that covers the inlet.
Push the plug firmly into the inlet with
the arrow facing upwards I.
2 Attach the desired accessory, i.e. large
floor brush, jet nozzle or the extension
tube directly to the hose handle
depending on the application.
H
I
70460 Rev 2 10/8/04 10:44 AM Page 5
6
3 To join extension tubes together, slide
one tube into the other until it locks in
place J.
4 Attach the two tubes to the handle of the
hose. Slide the handle into the extension
tube until it locks in place. Some tasks
may be easier with only one tube fitted
or none at all.
5 To connect the desired accessory
directly to the hose handle, slide the
handle into the accessory head until it
locks in place K.
Fitting connector
When using the large floor brush and the
triangular upholstery nozzle, the connector
will need to be fitted before attaching the
extension tube.
1 Push the connector end, holding it
upside down, fully into the brush inlet L.
2 Twist the connector
1
/
2
turn, until it locks
into place L.
• The fit between the connector and the
tubes and/or handle is tight to ensure no
steam leaks. It is recommended to keep
both parts lubricated with petroleum jelly
to facilitate connecting and
disconnecting.
3 To detach the accessories, press the
release button and pull the items apart.
Use of accessories
Steam handle
To avoid spurting of heavy and moist
steam it is recommended to always attach
an accessory to the steam handle.
Large floor brush
Recommended applications include,
carpets, rugs, sealed timber, parquetry,
ceramic tiles and vinyl.
Cotton cloth
Stretch the cloth over the bristles using
the clips provided on the brush head M.
Switch on the steam and move the cloth
covered brush gently over surfaces to be
cleaned. Replace cloth regularly so that
more dirt can be collected and to avoid too
much moisture being applied.
Extra cloths can be ordered by using our
helpline. Alternatively any strong white
cotton cloths may be used.
Triangular upholstery nozzle
The triangular nozzle also has a cotton
sock which fits over the bristles which is
ideal for use on upholstery and bedding.
J
K
L
M
70460 Rev 2 10/8/04 10:44 AM Page 6
Jet nozzle
Recommended applications include,
defrosting freezers, eliminating odours and
creases in clothing and removing dust from
plants.
• Place garments onto a clothes hanger
and spray steam at a distance of around
10-20cm.
•To remove dust from plants maintain a
distance of around 30-40cm to avoid
burning leaves by direct contact with the
steam.
• The closer you hold the jet nozzle to the
object to be cleaned, the better the
cleaning results.
Sanitising bedding and
upholstery
Sanitising and removing dust mites,
allergies from bedding and upholstery
Fit the upholstery nozzle and pass the
steam slowly and evenly over the surface
ensuring all areas are treated. Repeat the
process. Leave the mattresses to dry
thoroughly before covering.
After use
1 Switch the cleaner off and unplug from
the socket. Wait until the cleaner has
cooled down completely.
2 Remove the tank.
3 Empty the water tank. Allow the inside of
the water tank and filter to dry out before
replacing fully.
Anti-scale cartridge filter
IMPORTANT: To prevent scale build-up
inside the heater the anti-scale filter must
be replaced regularly. See table below for
recommended replacement intervals. This is
based on 1 hour use per week.
In very hard water areas distilled water
could also be used.
WARNING: Do not use any descaler
solutions in this product.
Replacing the filter
cartridge
1 Disconnect the appliance
from the mains outlet.
2 Slide out the tank and
remove the anti-scale
cartridge filter.
3 Pull the plate from the end
of the cartridge O.
4 Remove the foam pad P
and slide out the spent
anti-scale sleeve Q.
5 Place the refill into the
cartridge, reposition the
foam pad and clip the
plate onto the cartridge
making sure it locks in position.
•A spare anti-scale filter sleeve is
included with the product. Refills can be
ordered by calling our helpline.
Care and maintenance
Your cleaner is manufactured to
withstand normal day-to-day use, but an
occasional wipe over with a damp cloth will
help maintain its good looks. Abrasive
cleaners should not be used.
Helpline
If you have any difficulty with your
appliance do not hesitate to call us. We are
likely to be more help than the store from
where it was bought.
Please have the following information
ready to enable our staff to help you.
• Name of product
• Model number as
shown on the
underside of the
appliance.
7
Water hardness Soft Medium Hard
Replacement 6 3 1
1
/
2
interval (months)
O
P
Q
70460 Rev 2 10/8/04 10:44 AM Page 7
Two year guarantee
It is important to retain the retailers receipt
as proof of purchase. Staple your receipt to this
back cover for future reference.
Please quote the following information if the
product develops a fault. These numbers can
be found on the base of the product.
Model no. Serial no.
All Morphy Richards products are
individually tested before leaving the factory. In
the unlikely event of any appliance proving to be
faulty within 28 days of purchase it should be
returned to the place of purchase for it to be
replaced.
If the fault develops after 28 days and within
24 months of original purchase, you should
contact the Helpline number quoting Model
number and Serial number on the product, or
write to Morphy Richards at the address shown.
You will be asked to return the product (in
secure, adequate packaging) to the address
below along with a copy of proof of purchase.
Subject to the exclusions set out below (1-5) the
faulty appliance will then be repaired or
replaced and dispatched usually within 7
working days of receipt.
If for any reason this item is replaced during
the 2 year guarantee period, the guarantee on
the new item will be calculated from original
purchase date. Therefore it is vital to retain your
original till receipt or invoice to indicate the date
of initial purchase.
To qualify for the 2 year guarantee the
appliance must have been used according to
the manufacturers instructions. For example, the
anti-scale cartridge filter must have been
regularly replaced.
EXCLUSIONS
Morphy Richards shall not be liable to
replace or repair the goods under the terms of
the guarantee where:
1 The fault has been caused or is attributable
to accidental use, misuse, negligent use or
used contrary to the manufacturers
recommendations or where the fault has
been caused by power surges or damage
caused in transit.
2 The appliance has been used on a voltage
supply other than that stamped on the
products.
3 Repairs have been attempted by persons
other than our service staff (or authorised
dealer).
4 Where the appliance has been used for hire
purposes or non domestic use.
5 The guarantee excludes consumables such
as the anti-scale cartridge filter refills and
cotton cloths.
This guarantee does not confer any rights
other than those expressly set out above and
does not cover any claims for consequential
loss or damage. This guarantee is offered as an
additional benefit and does not affect your
statutory rights as a consumer.
• This guarantee is valid in the UK and Ireland
only.
Morphy Richards products are intended for
household use only.
Morphy Richards has a policy of continuous
improvement in product quality and design.
The company, therefore reserves the right to
change the specification of its models at any
time.
The After Sales Division
Registered address
Morphy Richards Ltd, Mexborough
South Yorkshire, England, S64 8AJ
Helpline (office hours)
UK 0870 060 2604
Republic of Ireland 1800 409119
VC70460M UK Rev 2 0704
70460 Rev 2 10/8/04 10:44 AM Page 8
Loading...