Breeze iron
steam/spray/shot
Please read and keep these instructions
Getting the best from your new iron....
Safety first
Caution must be used when handling this appliance as it does get very
hot. Always switch off the unit and allow to cool before cleaning or
storing.
Jet Cleaning (certain models are illuminated)
Your iron will give the best ironing results and will last longer if you
apply jet cleaning after each period of ironing.
RN40310 MUK Rev 3
If you have a problem or complaint, please call our dedicated UK based helpline
before returning your product to the retailer from where it was purchased.
UK Helpline: 0844 871 0953
Replacement Parts: 0844 873 0719
Ireland Helpline: 1800 409 119
!
To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.
Upon registration with Morphy Richards
(UK & ROI only)
Register online for your 2 year
guar antee . See bac k of this
instruction book for details.
(UK and Ireland customers only)
www.morphyrichards.co.uk
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 1
IMPORTANT
SAFETY
INSTRUCTIONS
The use of any electrical
appliance requires the
following common sense
safety rules:
Primarily there is danger of
injury or death and
secondly the danger of
damage to the appliance.
These are indicated in the
text by the following two
conventions:
WARNING: Danger to the
person!
IMPORTANT: Damage to
the appliance!
In addition, we offer the
following safety advice.
Location
• Do not use outdoors or
near water.
• The iron must be used and
rested on a stable surface.
Children
• Close supervision is
necessary when any
appliance is used near
children.
• Children do not understand
the dangers associated
with operating electrical
appliances.
• Children should be
supervised to ensure that
they do not play with this
appliance.
Personal Safety
• WARNING: Burns can
occur from touching hot
metal parts, hot water or
steam. Use caution when
you turn a steam iron
upside down, there may
be hot water in the water
tank.
• WARNING: To protect
against the risk of
electric shock, do not put
the appliance in water or
in any other liquid.
• Do not use the vertical
steam feature on clothes
that are being worn.
• Never allow the mains lead
to over hang the work
surface.
• The socket should always
be off before plugging or
unplugging from the socket.
Never yank the cord to
disconnect from the socket,
instead, grasp the plug and
pull to disconnect.
• Do not allow the cord to
touch hot surfaces.
• Let the iron cool completely
before putting away. Loop
the cord loosely around the
iron before storing.
• The iron must not be left
unattended while it is
connected to the supply
mains.
• When placing the iron on its
heel, ensure that the
surface on which the heel is
placed is stable.
• This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience or
knowledge, unless they
have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
Other safety
considerations
• Use the iron only for its
intended use.
• Always disconnect the iron
from the electrical socket
when filling with water or
emptying, and when not in
use.
• If the supply cord is
damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
person(s) in order to avoid a
hazard.
• Do not operate the iron with
a damaged cord, or if the
iron has been dropped or
damaged and if there are
visible signs of damage, or
if it is leaking. To avoid the
risk of electric shock, do
not disassemble the iron,
but telephone Morphy
Richards for advice.
Incorrect reassembly can
cause a risk of electric
shock when the iron is
used.
Special
instructions
If your iron does not work,
check the following points:
• Has the temperature control
been set to the required
temperature? Is the plug in
its socket? Is the plug itself
or the socket faulty? (Check
by plugging in another
appliance).
• WARNING: When not in
use, your iron should
never be placed flat and
left on an ironing board.
• To prevent damage to the
textile being ironed, follow
the temperature guide
carefully. (Test the inside of
the hem of the garment).
2
UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 2
3
For details of other Morphy Richards products, please see our website:
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of
the International Textile Care Labelling Code.
Symbol
(120°C Max) Cool
(160°C Max) Warm
(210°C Max) Hot
Control knob
positions
Do not iron
at all
Fabric
Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing
Iron on wrong side,
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank Dry and spray
Steam/spray/shot of steam
Without water in tank Dry ironing
INSTRUCTIONS FOR USE
Temperature guide
Jet clean
• When ironing is complete,
remove the plug from the socket,
empty any remaining water from
the tank, and allow to cool
before storage.
• If you drop or severely knock
your iron, this could cause
internal damage even if the
outside appears alright. Have it
checked by a qualified
electrician.
• It is recommended that you use
up one beaker of water by
operating your iron’s steam and
shot of steam functions before
ironing any clothes, as some
dripping may occur while your
iron’s steam system is activated.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your home
are not suitable for the plug
supplied with this appliance, the
plug should be removed and the
appropriate one fitted.
WARNING: A damaged or
severed mains cable fitted
with a plug should never be
connected to the mains
supply. It must be destroyed,
as a damaged cable becomes
hazardous if connected to a
power socket.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This appliance
must be earthed.
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 3
COMPONENTS OF
YOUR IRON
⁄ Steam control
¤ Spray button
‹ Shot of steam button
(certain models only)
› Filling hole with cap
fi Spray nozzle
fl Soleplate
‡ Temperature control dial with
indicator
· Water tank
‚ Temperature indicator light (red)
„ Filling beaker
BEFORE USE
Note: The steam facility should
only be used on garments which
are suitable for ironing at the
3 dot setting.
Textiles and clothes are
supposed to carry ironing
instructions. If they don’t, you
should follow the fabric guide on
page 3, but be sure to test the
temperature by ironing the hem
of the garment or similar area
first.
If you turn the control dial down
from a hot setting to a cooler
setting, wait until the iron
temperature has stabilised
before you continue ironing.
4
UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119
⁄
¤
‹
›
fi
fl‡
·
‚
„
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 4
5
FILLING
A
1 Make sure that the iron is not
plugged in and then set the
steam control ⁄ to the ‘ ’
position before filling the iron
with water.
2 Lift up the fill cap and fill with
water through the filling hole ›
using the beaker provided A.
1
1
/2 beakers fills the tank
(230ml). After filling, replace the
fill cap.
IN HARD WATER AREAS, THE
USE OF DISTILLED OR
DEMINERALISED WATER IS
RECOMMENDED.
Never use battery topping up
fluid or water containing any
substances like starch or
sugar, or defrosted water from
a refrigerator.
3 Always pour out the remaining
water after use.
WARNING: When filling your
iron with tap water, always
use the beaker provided.
Never fill directly under the
tap.
TEMPERATURE
CONTROL
Plug in the iron and switch on.
Set the temperature control dial
to the temperature required B,
but don’t start ironing
immediately. If you wait a few
minutes, the iron will stabilise at
the required setting.
Your Morphy Richards iron is
fitted with an indicator light ‡‚
which will go on and off while
you are ironing. This is perfectly
normal as it shows that the iron
is maintaining the heat setting
you have chosen.
It is always a good idea to begin
with cool fabrics and work up to
higher settings. An iron heats up
quicker than it cools down, so
you’ll save time and electricity.
FEATURES OF YOUR
IRON
Temperature
indicator light
The indicator light shows that
the iron is warming up. When
the required temperature is
reached, the light will go out and
will cycle on-off during
operation.
Dry ironing
You can use your iron as a dry
iron only. Make sure the steam
control ⁄ is set to the ‘ ’
symbol.
Any temperature setting may be
used, depending on the
garment. The spray feature may
be used provided there is water
in the tank (see filling section).
You do not need to put any
water in the tank when dry
ironing only.
Spray
C
Press the spray button ¤ and
aim the spray of water at
stubborn creases. You can do
this whilst dry ironing providing
there is water in the tank.
When using the water spray, it
may be necessary to push the
button a few times to get the
spray pump primed.
Variable steam
Fill the iron with water as
described in ‘Filling’, then insert
the plug into the electrical
socket.
The steam output can be
switched from off to on by
sliding the steam control ⁄D.
The steam facility should only
be used on garments which are
suitable for ironing at the 3 dot
setting.
A
UK
Helpline 0870 060 2614 Replacement Parts 0870 157 6645 Ireland Helpline 1800 409119
For details of other Morphy Richards products, please see our website:
C
B
Steam
No steam
D
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 5
www.morphyrichards.com
6
UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119
Shot of steam
E
(certain models only)
Press the shot of steam button
‹ to obtain a burst of extra
steam for ironing out creases in
heavy material, such as denim
etc.
The shot of steam can be used
whilst dry ironing, providing
there is water in the tank, and
the temperature control is set
within the steam range.
Do not use shot of steam at
temperatures below the steam
range shown on the control.
Note: For optimum steam
quality, do not operate the shot
more than three times in
succession.
Vertical steam
(certain models only)
Hold the iron in a vertical
position between 1cm and 2cm
away from the item F. Press the
shot of steam button ‹, this will
create vertical steam. This
feature is especially useful for
removing creases from hanging
clothes, curtains, wall hangings
etc.
Note: For optimum steam
quality, do not operate the shot
more than three times in
succession.
MAINTENANCE
Emptying and storing
When you have finished ironing,
unplug your iron. Ensure that the
steam control is set at the ‘ ’
position, lift up the fill cap and
empty any remaining water out
of the filling hole G.
Do not store in the box, but in
an upright position H, so that
any drops of water remaining
cannot leak out and discolour
the soleplate.
IMPORTANT: The flex can be
damaged if wound too tightly
around the iron after use. Make
a loose loop with the flex and
wrap it around the iron. The iron
must be cool before winding the
flex and storing on its heel.
Jet cleaning
(certain models only)
Your iron has a built in cleaning
system designed to keep the
water valve, steam chamber and
steam vents clear of lint and
loose mineral deposits. The ‘jet
clean’ should be operated after
each period of ironing.
To operate, ensure that there is
little water in the tank, place the
iron on its heel and turn the
temperature control dial to the
maximum setting. Wait for the
temperature indicator light to go
out, then unplug the iron and
hold it about 6’’ (150mm) above
the sink in the ironing position.
Press the shot of steam button
about 10 times in succession.
After this cleaning operation,
empty out any remaining water.
E
G
H
F
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 6
7
UK
Helpline 0870 060 2614 Replacement Parts 0870 157 6645 Ireland Helpline 1800 409119
To clean an
aluminium soleplate
To keep the soleplate of your
iron clean and free of limescale,
make a paste of mild scouring
powder and a little water. Apply
a small amount to the soleplate,
rub and then remove with a
damp cloth. Wipe thoroughly
with a clean cloth.
To clean a stainless
steel soleplate
(certain models only)
To keep the soleplate of your
iron clean and free of limescale,
we recommend that you use
one of the gentle chrome, silver
or stainless steel cleaners that
are generally available. Always
follow the manufacturer’s
instructions. To clean off melted
man-made fibres, set the iron at
3 dot position and pass it over a
clean piece of cotton, this will
draw the deposit off the surface.
To clean the exterior
Allow the iron to cool and wipe
over with a damp cloth and mild
detergent, then wipe with a dry
cloth.
HELPLINE
If you have any difficulty with
your appliance, do not hesitate
to call us.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly.
• Name of the product
• Model number and Serial
number as shown on underside
of the appliance.
UK Helpline 0844 871 0953
Replacement Parts 0844 873 0719
Ireland Helpline 1800 409 119
WEBSITE
You may also contact us
through our website, or visit the
site to browse and purchase
appliances, spare parts and
accessories from the extensive
Morphy Richards range.
For details of other Morphy Richards products, please see our website:
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 7
8
Morphy Richards products are intended for household use only.
Morphy Richards has a policy of continuous improvement in product quality and
design. The company, therefore, reserves the right to change the specification of
its models at any time.
The After Sales Division
Morphy Richards Ltd
Mexborough, South Yorkshire,
England, S64 8AJ
Helplines (office hours)
UK 0844 871 0953
Spare Parts 0844 873 0719
Republic of Ireland 1800 409 119
RN40310 MUK Rev 3 11/09
REGISTERING
YOUR TWO YEAR
GUARANTEE
Your standard one year guarantee is
extended for an additional 12
months when you register the
product within 28 days of purchase
with Morphy Richards. If you do not
register the product with Morphy
Richards within 28 days, your
product is guaranteed for 1 year. To
validate your 2 year guarantee
register with us online at
www.morphyrichards.co.uk
N.B. Each qualifying product needs
to be registered with Morphy
Richards individually.
Please note that the 2 year
guarantee is only available in the
UK and Ireland. Please refer to the
one year guarantee for more
information.
YOUR ONE YEAR
GUARANTEE
It is important to retain the retailer’s
receipt as proof of purchase. Staple
your receipt to this back cover for
future reference.
Please quote the following
information if the product develops
a fault. These numbers can be
found on the base of the product.
Model no.
Serial no.
All Morphy Richards products are
individually tested before leaving the
factory. In the unlikely event of any
appliance proving to be faulty within
28 days of purchase, it should be
returned to the place of purchase
for it to be replaced.
If the fault develops after 28 days
and within 12 months of original
purchase, you should contact the
Helpline number quoting Model
number and Serial number on the
product, or write to Morphy
Richards at the address shown.
You may be asked to return a copy
of proof of purchase.
Subject to the exclusions set out
below (see Exclusions), the faulty
appliance will then be repaired or
replaced and dispatched usually
within 7 working days of receipt.
If, for any reason, this item is
replaced during the 1 year
guarantee period, the guarantee on
the new item will be calculated from
original purchase date. Therefore it
is vital to retain your original till
receipt or invoice to indicate the
date of initial purchase.
To qualify for the 1 year guarantee,
the appliance must have been used
according to the instructions
supplied. For example, crumb trays
should have been emptied regularly.
EXCLUSIONS
Morphy Richards shall not be liable
to replace or repair the goods under
the terms of the guarantee where:
1 The fault has been caused or is
attributable to accidental use,
misuse, negligent use or used
contrary to the manufacturer’s
recommendations or where the fault
has been caused by power surges
or damage caused in transit.
2 The appliance has been used on a
voltage supply other than that
stamped on the products.
3 Repairs have been attempted by
persons other than our service staff
(or authorised dealer).
4 The appliance has been used for
hire purposes or non domestic use.
5 The appliance is second hand.
6 Morphy Richards are not liable to
carry out any type of servicing
work, under the guarantee.
7 Plastic filters for all Morphy
Richards kettles and coffee makers
are not covered by the guarantee.
8 Batteries and damage from leakage
are not covered by the guarantee.
• This guarantee does not confer any
rights other than those expressly set
out above and does not cover any
claims for consequential loss or
damage. This guarantee is offered
as an additional benefit and does
not affect your statutory rights as a
consumer.
For electrical products sold within the
European Community. At the end of the
electrical products useful life, it should
not be disposed of with household
waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice in your
country.
8
8
RN40310MUK Rev3:RN40310MUK Rev3 20/11/2009 16:01 Page 8
Loading...