○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Blender & millBlender & mill
Blender & mill
Blender & millBlender & mill
Please read and keep these instructions
getting the best from your new
blender and mill
Safety first
The blender and mill blades are very sharp, therefore handle with care when
using and cleaning.
Quantities
Do not overfill the blender. Refer to the operating chart for quantities and
operating times.
Ensure the blender lid is in place
When using the blender ensure the lid is in place before switching on and do
not remove until the blades have stopped rotating.
www.morphyrichards.co.uk
Important safetyImportant safety
Important safety
Important safetyImportant safety
Personal safetyPersonal safety
Personal safety
Personal safetyPersonal safety
○○○○○○○○○○○○○○○○○○○○○
instructionsinstructions
instructions
instructionsinstructions
○○○○○○○○○○○○○○○○○○○○○
The use of any electrical appliance
requires the following basic common
sense safety rules.
Primarily there is danger of injury or
death and secondly the danger of
damage to the appliance. These are
indicated in the text by the following two
conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the
appliance! In addition we offer the
following safety advice.
LocationLocation
Location
LocationLocation
○○○○○○○○○○○○○○○○○○○○○
• Remove all packaging and retain for
future reference.
• Ensure the blender is used on a
firm, flat surface.
• Do not use the blender outdoors
or in a bathroom.
• Do not place the blender on a
highly polished wooden surface as
damage may occur to the surface.
• Do not place the blender on or
near hot surfaces such as a hot plate
or radiant rings or near a naked flame.
• Do not let the mains lead overhang the
edge of the table or work-top, or touch
hot surfaces.
• DO NOT PLACE THE APPLIANCE ON
OR A NEAR A HOT GAS OR
ELECTRIC HOB, OR IN A HEATED
OVEN.
ChildrenChildren
Children
ChildrenChildren
○○○○○○○○○○○○○○○○○○○○○
• Children do not understand the
dangers associated with operating
electrical appliances. Never allow
children to use this appliance.
• IMPORT ANT: THE BLENDER AND
MILL BLADES ARE VERY SHARP.
Handle with care when using and
cleaning.
• Keep hands and utensils out of the
blender when it is switched on.
• Allow hot liquids to cool before
blending, always ensure the lid is fitted
correctly.
• Avoid touching moving parts. Keep
hands, hair, clothing as well as
spatulas and other utensils away from
blender blades during operation, to
prevent personal injury and/or damage
to the appliance.
Other safety considerationsOther safety considerations
Other safety considerations
Other safety considerationsOther safety considerations
○○○○○○○○○○○○○○○○○○○○○
• Disconnect the blender from the mains
supply when not in use, before taking
off attachments, and before cleaning.
• To protect against risk of electric shock
NEVER immerse the blender body
in water or any other liquid and always
ensure the electrical connections are
kept dry.
• Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been
damaged in any manner. Ring the
helpline number for advice on
examination and repair.
• The use of attachments or tools not
recommended or sold by Morphy
Richards may cause fire, electric shock
or injury.
• Do not use abrasive cleaners on the
outside of the blender, they may
scratch the surface. Clean only with a
soft damp cloth.
• Do not use the blender for other than
its intended use.
2
• Do not overfill the blender. This could
cause damage to the motor. The 3A
fuse will blow if the blender is over
loaded. Replace fuse and do not
exceed the maximum recommended
volumes. Refer to the operating chart.
• Do not blend or mill for longer than the
time periods recommended in the
operating chart.
• When using the blender or mill ensure
the lid is in place before switching on
and do not remove the lid until the
blade has stopped rotating.
Electrical requirementsElectrical requirements
Electrical requirements
Electrical requirementsElectrical requirements
○○○○○○○○○○○○○○○○○○○○○
Check that the voltage on the rating plate of
your appliance corresponds with your house
electricity supply which must be A.C.(Alternating
current).
If the socket outlets in your home are not
suitable for the plug supplied with this appliance
the plug should be removed and the appropriate
one fitted.
IMP0RT ANT : THE PLUG REMOVED FROM
THE MAINS LEAD, IF SEVERED, MUST BE
DESTROYED AS A PLUG WITH A BARED
FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET.
Should the fuse in the 13 amp plug require
replacement, a 3 amp BS1362 fuse must be
fitted.
This appliance is a double insulated
product and it does not require an earth.
Features of your blenderFeatures of your blender
Features of your blender
Features of your blenderFeatures of your blender
and mill attachmentand mill attachment
and mill attachment
and mill attachmentand mill attachment
○○○○○○○○○○○○○○○○○○○○○
Filler cap
Lid
Jug
Base unit
Cord storage
Control switch
Mill attachment jar
Mill attachment
Blender & mill useBlender & mill use
Blender & mill use
Blender & mill useBlender & mill use
○○○○○○○○○○○○○○○○○○○○○
Use your blender for soups, sauces, drinks,
pates, mayonnaise, dressings etc.
Use your mill for milling herbs, nuts and coffee
beans.
3
Operating controlsOperating controls
Operating controls
Operating controlsOperating controls
○○○○○○○○○○○○○○○○○○○○○
The blender control switch has the following
settings. Pulse, off, speed 1 and speed 2.
PULSE
OFF
CLEAN
The speed can be adjusted whilst the blender
is in use.
Using the pulse button allows greater control
over the texture of the food produced. It is only
intended to be used for short ‘bursts’ of blending.
Operating the blenderOperating the blender
Operating the blender
Operating the blenderOperating the blender
○○○○○○○○○○○○○○○○○○○○○
Setting up
SPEED 1
SPEED 2
IMPORTANT:
Blender and Mill
T o ensure the long life of your blender never run it
for longer than 60 seconds or the mill for longer
than 30 seconds. Switch off as soon as you have
reached the desired consistency.
• Don’t process spices they may damage the
plastic.
• The machine will not work if the blender or mill
is fitted incorrectly.
Blender only
• Don’t put dry ingredients into the blender
before switching on. If necessary, cut them
into pieces; remove the filler cap; then, with
the machine running drop the pieces through
one by one.
• Empty regularly
1 Ensure the blender base unit is unplugged
fromthe mains.
2 Place the blender jug
and turn anti-clockwise until the tabs on
the jug lock securely into the slots on the
base unit.
3 Place the food in the blender.
4 Place the lid
filler cap
Always ensure the blender lid has clicked into
place.
5 Plug in the blender and turn the control switch
to either pulse, speed 1 or speed 2
depending on the desired consistency. Always
operate the blender with the lid in place.
6 Never operate the blender with more than
1500ml of liquid or when empty.
onto the blender. Then put the
into the lock position.
onto the base unit
Don’t use the blender as a storage container.
•
Keep it empty when not in use.
• Never blend more than 1 litre (1 3/4 pints) -
less for frothy liquids such as milk shakes.
Mill only
• Use for dry ingredients only
Operating the millOperating the mill
Operating the mill
Operating the millOperating the mill
○○○○○○○○○○○○○○○○○○○○○
1 Put your ingredients into the mill attachment
jar and fill it no more than half full.
4
2 Turn the mill attachment upside down and
lower into the mill attachment jar
down).
3 Place the mill attachment into the jar and twist
in a clockwise direction to lock.
Operating chartOperating chart
Operating chart
Operating chartOperating chart
○○○○○○○○○○○○○○○○○○○○○
(blades
4 Turn the correct way up.
5 Place the mill onto the base unit and twist anti-
clockwise until the tabs on the mill lock
securely into the slots on the base unit.
6 Switch the unit on using the control switch and
select the desired control speed.
Blending/
liquidising
Milling Herbs
DO NOT OVER PROCESS FOR LONGER THAN RECOMMENDED TIME
DO NOT EXCEED RECOMMEDED MAXIMUM VOLUMES
Soups, purees,
drinks,
milkshakes,
batters
nuts
coffee beans
1.5 lt 1-2
+ pulse
pulse
15 secs-1min Begin with low speed and
10 secs 30 secs
increase to high if
required.
5
Hints and tipsHints and tips
Hints and tips
Hints and tipsHints and tips
○○○○○○○○○○○○○○○○○○○○○
When making mayonnaise, put all the
ingredients, except the oil, into the blender. Then
with the machine running, pour the oil slowly into
the blender through the filler cap hole.
Thick mixtures, eg. pates and dips, may need
scrapping down with a spatula (ensure the
appliance is switched off first). If the mixture is
difficult to process add more liquid.
When crushing ice, add 15ml (1tbsp) water
to 6 ice cubes and operate the blender in short
bursts using pulse setting.
When blending pour the liquids in first and
then add the solid food. Begin blending at the
lower speed and increase when needed.
Cleaning and storageCleaning and storage
Cleaning and storage
Cleaning and storageCleaning and storage
○○○○○○○○○○○○○○○○○○○○○
BEFORE CLEANING, SWITCH OFF AND
UNPLUG THE MAINS LEAD.
After use, fill the blender or mill attachment
with warm water and run for 30 seconds on the
pulse setting and repeat as necessary. Never use
abrasives or cream cleaners. Clean the base unit
with a damp cloth or kitchen paper roll.
NEVER IMMERSE THE BLENDER BASE
UNIT IN WATER.
After the blender has been cleaned, the mains
lead can be wound round the storage area
underneath the base unit.
6
HelplineHelpline
Helpline
HelplineHelpline
○○○○○○○○○○○○○○○○○○○○○
If you have any difficulty with your appliance,
do not hesitate to call us. We’re more likely able
to help than the store from where you bought it.
Please have the following information ready to
enable our staff to deal with your query quickly .
• Name of the product
• Model number as shown on the
underside of the appliance.
• Serial number as shown on underside
of the appliance.
7
Your two year
guarantee
○○○○○○○○○○○○○○○○○○○○○○
• It is important to retain the retailers
receipt as proof of purchase. Staple your
receipt to this back cover for future reference.
Please quote the following information if the
product develops a fault. These numbers can
be found on the base of the product.
Model No. Serial No.
All Morphy Richards products are individually
tested before leaving the factory. In the unlikely
event of any appliance proving to be faulty within
28 days of purchase it should be returned to the
place of purchase for it to be replaced.
If the fault develops after 28 days and within
24 months of original purchase, you should
contact the Helpline number quoting Model
number and Serial number on the product, or
write to Morphy Richards at the address shown.
Y ou will be asked to return the product (in
secure, adequate packaging) to the address
below along with a copy of proof of purchase.
Subject to the exclusions set out below (see
‘Exclusions’) the faulty appliance will then be
repaired or replaced and dispatched usually
within 7 working days of receipt.
If for any reason this item is replaced during
the 2 year guarantee period, the guarantee on
the new item will be calculated from original
purchase date. Therefore it is vital to retain your
original till receipt or invoice to indicate the date
of initial purchase.
T o qualify for the 2 year guarantee the appliance
must have been used according to the manufacturers instructions. For example kettles
should have been regularly descaled.
EXCLUSIONS
Morphy Richards shall not be liable to replace
or repair the goods under the terms of the
Guarantee where:
1 The fault has been caused or is attributable
to accidental use, misuse, negligent use or
used contrary to the manufacturers
recommendations or where the fault has
been caused by power surges or damage
caused in transit.
2 The appliance has been used on a voltage
supply other than that stamped on the
products.
3 Repairs have been attempted by persons
other than our service staff (or authorised
dealer).
4 Where the appliance has been used for hire
purposes or non-domestic use.
5 Morphy Richards are not liable to carry out
an y type of servicing work, under the
guarantee.
6 Plastic filters for all Morphy Richards kettles
and coffee makers are not covered by the
guarantee.
This guarantee does not confer any rights
other than those expressly set out above and
does not cover any claims for consequential
loss or damage. This guarantee is offered as an
additional benefit and does not affect your
statutory rights as a consumer.
This guarantee is valid in the UK and Ireland
•
only.
Morphy Richards products are
intended for household use only.
Morphy Richards has a policy of
continuous improvement in product
quality and design.
The Company, therefore, reserves
the right to change the
specification of its models at any time.
The After Sales Division,
Morphy Richards Ltd, Mexborough,
South Yorkshire, England, S64 8AJ
Helpline (office hours)
UK 0870 060 2612
Republic of Ireland 1800 409119
444/8502/84 Rev 2
Loading...