HOUSING
ACCESSORIES_
ENCLOSURES_
SPVO50,
SPVP110, SPVRJ01
Surge Protectors
Extend the life of your electronics, use one of the surge protectors from Moog, the rst line of defense when keeping your
equipment safe from surges and lower its potential for over heating and frying. Radio frequency interference (RFI) and other forms
of electrical interference, such as surges and spikes, are a very common problem in the security industry. Low level signals such
as closed-circuit television and associated data links are extremely susceptible to even small disruptions. Our surge protectors
employ semiconductor clamping devices which protect against spikes and surges.
SPVO50, SPVP110, SPVRJ01
SPVO50, SPVP110, SPVRJ01
Video Surge Protectors:
Coax Video Surge Protection (BNC CONNECTOR)
SPVO50
Surge protection for video only
Key Features
•
Reliable protection
•
Small package
•
Easy to install
Video Input:
Maximum Video Level:
Line to Shield Current (MAX):
Response Time:
Shield to Ground Current (MAX):
Frequency Response:
24Vac Power Input:
Input Voltage (MAX):
Maximum Current:
Normal Operating Current:
Maximum Surge Current:
Response Time:
Interference Filter:
Differential Mode Attenuation:
Common Mode Attenuation:
Control Line Input:
Maximum Signal Level
Maximum Surge Current
Response Time:
Frequency Response:
AC:
DC:
Differential Mode:
Common Mode:
SPVP110
110Vac power surge protection
SPVRJ01
Data / power over ethernet power / data surge protection
Mechanical Specications
This protects the video line to the camera by means of fast acting diode clamps
5.0 Volts/1.0 Volt is normal
3000 Amps
1.0 Picosecond
6500 Amps
DC to 12 MHz
Protects camera and pan / tilt power
40 Volts
3.0 Amps
2.0 Amps
4000 Amps
1.0 Picoseconds
100 kHz to 25 MHz (noise)
50.0 dB
30.0 dB
Protects 2 wire control line for pan / tilt.
16 Volts - RS232 has a Voltage of ± 15 Volts
25 Volts
2000 Amps
4000 Amps
5.0 Nanoseconds
DC to 3 MHz
©2013 Moog, Inc. All rights reserved.
Product and company names listed are trademarks
or trade names of their respective companies.
Specifications are subject to change, to confirm current
call +1 847.498.0700.
Sensor and Surveillance Systems
3650 Woodhead Drive Northbrook, IL. USA 60062
+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com
Form 500-XXX 073013