Moog SDW12C-BRC300, SDW12C, SDW12CHB, SDW12T, SDW12THB Specsheet
HOUSING
ENCLOSURES_
CERTIFIED
SDW12/16
SuperDome™ Housing
Moog Videolarm’s SuperDome is a general purpose dome camera housing. This unit is available with either a 12” or 16” dome and comes
with a factory installed wall mount. It features a ¼”, UV rated, ABS plastic upper dome and a 1/8” cell-cast acrylic lower dome. The 12”
model allows two xed cameras, the 16” unit allows for three cameras.
Key Features
•
Available with clear or tinted dome
•
Optional inner liner available
•
Security fasteners standard equipment
•
Houses single or multiple xed cameras
•
Optional heater/blower
© 2009-2010, Moog Videolarm, Inc. All Rights Reserved
SDW12/16_
Product and company names listed are trademarks or trade names of their respective companies.
Outdoor/ Indoor SDW12: Outdoor/ Indoor SDW16:
SDW12C
12” outdoor/indoor xed camera dome housing. Includes 1 xed camera
bracket; can accommodate up to 2 full-body xed cameras (FM2). Security
fasteners, includes wall mount, MCL 7”-8”
SDW16C
16” outdoor/indoor xed camera dome housing. Includes 1 xed camera
bracket; can accommodate up to 2 full-body xed cameras (FM2). Security
fasteners, includes wall mount, MCL 10”
SDW12CHB
12” outdoor/indoor xed camera dome housing. Includes 1 xed camera
bracket; can accommodate up to 2 full-body xed cameras (FM2).
Security fasteners, includes wall mount, heater/blower (included in outdoor
models), MCL 7”-8”
Moog Videolarm specializes in housings for xed, multi-camera applications. These congurations offer an inexpensive alternative to pan/tilts. The SuperDome™ offers:
• The housing accommodates
SDW12 MCL (Maximum Camera Length) 8” 1 camera / 7” 2 cameras
SDW16 MCL (Maximum Camera Length) 12” 1 camera/ 8” 2 cameras / 7” 3 cameras
• Adjustable for viewing in many directions
• Easy Installation
NOTE: If the application calls for more than one camera in the unit, an additional FM1 bracket will be needed for each additional camera.
up to 3 xed cameras:
SDW16CHB
16” outdoor/indoor xed camera dome housing. Includes 1 xed camera bracket;
can accommodate up to 2 full-body xed cameras (FM2). Security fasteners,
includes wall mount, heater/blower (included in outdoor models), MCL 10”
SPECIFICATIONS:
Electrical Specications
Power Source:
Power Consumption:
Pan/Tilt Power Consumption:
Maximum Load:
Weight;
WITH PAN/TILT RECEIVER
(VLPT355 / 360 xed speed versions)
Power Source:
Power Consumption:
Without Heater:
With Heater/Blower:
Video:
Control:
24 VAC
52vA (camera not included)
16 vA (max) - .625 Amps P/T
5 lbs balanced
3.25 lbs (1.47 kg)
24VAC
30W (max) - 1.25 Amps
82W (max) - 3.4 Amps
Inputs:
1 Vpp/75 ohm composite video
Multiplexed on video signal
10.36”
3.25”
12.88”
Architectural Drawings
SDW12:
SDW16:
Model
A B
12.0” 15.25”
16.0””
18.4”
Engineering Specications
Each unit in the SuperDome™ general purpose, outdoor
housing series shall be equipped with a pre-attached, universal
wall mount, and shall be available with either a 12” or 16” clear
or tinted (1 F-stop light reduction) lower dome made from 1/8”
cell-cast acrylic. The upper dome shall be 1/4” ABS plastic.
Optional items shall include: 24VAC, 2.08 Amp heater and surge
protector; 24VAC, .16 Amp blower and surge protector, or
heater/blower combination; 355 integral pre-wired 12 degree
per second or variable speed pan/tilt; presets; continuous 360°
rotation pan/tilt; and CoaxLynx™ receiver/driver and its options.
500-699 + 07-29-2010
Moog Videolarm, 2525 Park Central Boulevard, Decatur, GA 30035 USA + 1.800.554.1124 www.videolarm.com
6.87”
B
A
Dimensions are in inches
Loading...