Moog SDP12C, SDP12CHB Specsheet
HOUSING
CAMERA
ENCLOSURES_
ENCLOSURES_
SDP12/16
SuperDome™ Housing
The SuperDome is a general purpose dome camera housing. This unit is available with either a 12” or 16” dome and comes with
a pendant mount. It features a ¼” UV rated, ABS plastic upper dome and a 1/8” cell-cast acrylic lower dome. The 12” model
allows two xed cameras, the 16” unit allows for three cameras.
Features
•
•
Available with clear or tinted dome
•
Optional inner liner available
•
Security fasteners standard equipment
Houses single or multiple xed cameras
•
Optional heater / blower
SDP12/16
SDP12/16
Outdoor/ Indoor SDP12:
SDP12C
12” outdoor / indoor xed camera
dome housing. Includes 1 xed
camera bracket; can accommodate
up to 2 full-body xed cameras
(FM1). Security fasteners, optional
pendant mount, MCL (Maximum
Camera Length) 7”-8”
Moog specializes in housings for xed, multi-camera applications. These
congurations offer an inexpensive alternative to pan / tilts. The SuperDome
offers:
•
Ability to accommodate up to 3 xed cameras:
SDP12 MCL: 8” for 1 camera / 7” for 2 cameras
SDP16 MCL: 12” for 1 camera / 8” for 2 cameras / 7” for 3 cameras
•
Adjustable viewing in many directions • Easy Installation
NOTE: If the application calls for more than one camera in the unit, an additional
FM1 bracket will be needed for each additional camera
Electrical Specications
Power Source:
Power Consumption:
Pan / Tilt Power Consumption:
Maximum Load:
Weight:
Dimensions / Architectural Drawings
SDP12: A 12.0” B 15.25”
5.06
O
[ 128.7 ]
SDP12CHB
12” outdoor / indoor xed camera
dome housing. Includes 1 xed
camera bracket; can accommodate
up to 2 full-body xed cameras
(FM1). Security fasteners, optional
pendant mount, heater / blower
(included in outdoor models),
MCL 7”-8”
24Vac
52vA (camera not included)
16 vA (max) - .625 Amps P/T
5 Lbs. balanced
3.25 Lbs. (1.47 Kg.)
O
[ 60.5 ]
2.38
™
Outdoor/ Indoor SDP16:
SDP16C
16” outdoor / indoor xed camera
dome housing. Includes 1 xed
camera bracket; can accommodate
up to 2 full-body xed cameras
(FM1). Security fasteners, optional
pendant mount, MCL 10”
SDP16CHB
16” outdoor / indoor xed camera
dome housing. Includes 1 xed camera
bracket; can accommodate up to 2
full-body xed cameras (FM1). Security
fasteners, optional pendant mount,
heater / blower (included in outdoor
models), MCL 10”
Accessory:
WM20G
Aluminum gooseneck wall bracket
•
Durable powder coat nish
•
All aluminum construction
•
1½” pipe thread on end for quick and easy dome mounting
Engineering Specications
Each unit in the SuperDome™ general purpose, outdoor housing series shall be equipped
with a pre-attached, optional pendant mount, and shall be available with either a 12”or
16” clear or tinted (1 F-stop light reduction) lower dome made from 1/8” cell-cast acrylic.
The upper dome shall be ¼” ABS plastic. Optional items shall include: 24Vac, 2.08 Amp
heater and surge protector; 24Vac, 16 Amp blower and surge protector, or
heater / blower combination; 355 integral pre-wired 12° per second.
Dimensions / Architectural Drawings
SDP16: A 16.0” B 18.4”
2.25
O
O
5.06
[ 128.7 ]
[ 57.2 ]
14.30
O
[ 363.2 ]
6.00
R
Dimensions are
in inches (mm)
[ 152.4 ]
©2013 Moog, Inc. All rights reserved.
Product and company names listed are trademarks
or trade names of their respective companies.
Specifications are subject to change, to confirm current
call +1 847.498.0700.
½
1
"NPT
11.02
[ 279.9 ]
16.38
[ 416.1 ]
5.36
[ 136.2 ]
Dimensions are
in inches (mm)
Sensor and Surveillance Systems
3650 Woodhead Drive Northbrook, IL. USA 60062
+1.847.498.0700 Fax: +1.847.498.1258 www.moogS3.com
O
18.36
[ 466.2 ]
1
1
"NPT
2
2.90
[ 73.7 ]
9.41
[ 239 ]
19.56
[ 496.8 ]
7.25
[ 184.2 ]
Form 500-XXX 062314
Loading...