Moog 914-HDV BROCHURE

Fiber Optic Multiplexers

914-HDV

High Denition Video Media Converter

Description

The Model 914-HDV Media Converter is an electro-optical device

for transmitting High Denition Video over singlemode (9/125 um) ber, packaged into our 914 (credit card sized) form-factor, resulting in our smallest solution for HD-SDI (SMPTE-292 M) to ber conversion. The 914-HDV media converter may be used as a standalone card or optically integrated into a 914 system stack via CWDM modules. Optical power budgets are typically 20 - 26 dB over 10 km of singlemode fiber. Diagnostics are provided by on-board LEDs for optical and video link status.

Features

• Video input includes cable equalizer

• Upgrade available for 1080 p (SMPTE-424) “Full HD” compatibility

• Wavelength selectable/interchangeable SFP transceivers

• Rugged design for marine environment, including 6000 psi

pressure tolerant version

Typical Applications

• Remotely Operated Vehicles (ROVs) and Tether Management Systems

• Pipe Inspection Robots

• Bomb Disposal Robots

• Video Security Systems

• Tactical Networks and Defense Systems

• Industrial Process Control

Benets

• Simplied interfaces for minimal conguration

• Extremely small size allows installation in less than 2 inch

diameter enclosures

• 4 HP adapter available for euro-rack upgrades/retro ts

• Supports a wide range of optical options, including CWDM wavelengths for combining multiple cards on a single

optical ber

Moog Components Group, Halifax Operations

77 Frazee Avenue, Dartmouth, Nova Scotia, Canada B3B 1Z4

www.moog.com/marine • email: mcg@moog.com

• 888-302-2263 • +1-902-468-2263 • Fax +1-902-468-2249

Fiber Optic Multiplexers

Video

No. of Channels 1

Format HD-SDI (SMPTE-292 M)

Data Rate 1485 – 2970 Mbps (see options)

Output Voltage 800 mV pp nominal

Impedance 75 Ohms

Options Contact Moog for 1080 p (SMPTE-424)

“Full HD” upgrade (3G-HD)

Optical

Optical Fiber 1 or 2 singlemode (9/125 um)

Baud Rate 1.485 Gbaud (2.97 optional)

Wavelengths 1310/1550 nm standard

(CWDM optional)

Flux Budget 20 dB min. standard (others available)

Options CWDM wavelengths for combining multiple

907 cards on one singlemode ber; bidirectional transceivers; extended temperature

Electrical

Power Supply +5 VDC regulated input required

Power Used 4 W typical, per end

Protection Overvoltage and reverse polarity

protection, fused

Mechanical

Dimensions See drawing below

Weight 90 g (0.2 lb)

Enclosures Contact Moog for custom enclosures

LED On-board diagnostic LEDs including: power,

receive optical link valid, valid HD activity

Connectors

Optical Dual LC (SFP)

Video Mini SMB, 75 Ohm

Power 1 x 2-pin Molex

Environmental

Temperature -10 to +60 °C (operational)

-20 to +85 °C (storage)

Humidity 85% relative, non-condensing

Shock 30 g, 11 ms, per ISO 13628-6 Q1 level

Vibration 5 g, 25 - 1000 Hz, per ISO 13628-6 Q1 level

914-HDV Dimensions

Dimensions in inches [mm]