Precise Octave Pedal
Precautions
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 9V DC,,center negative. Unplug the AC power adapter when not in use or during electrical storms.
Connections
Always turn off the power of this and all other equipment before connecting or disconnecting, this will help prevent malfunction and / or damage to other devices. Also make sure to disconnect all connection cables and the power cord before moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions:
Direct sunlight |
Heat sources |
Magnetic fields |
Extreme temperature or humidity |
Excessive dusty or dirty location |
High humidity or moisture |
Strong vibrations or shocks |
|
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation
Introduction
Due to huge demand and a mass of enquiries from musicians across the globe, the Tender Octaver micro pedal from MOOER is back!!! The Tender Octaver mkII has retained the simplistic controls and tiny form factor that was so popular with its predecessor, whilst adding some very special updates.
Main Features
Independent SUB, UPPER and DRY controls to really get the pedal dialed in
Fast, accurate, polyphonic tracking
3 brand new algorithms instantly provide very different tones at the flip of a switch
All analog dry through signal completely retains your original instrument in all its glory
True-bypass switching
Micro Size and metal housing for the best in portability and road worthy construction
|
|
Pedal layout |
|
|
|
3 |
|
|
FAT |
1. Footswitch: |
|
9 |
TIGHT |
Engages and disengages the effect |
|
SWELL |
|||
|
|
||
6 |
|
7 2. LED: |
|
|
|
Displays the On/Off status |
|
|
|
3. DC IN |
|
8 |
|
Connect a 9V DC power supply. |
|
|
|
44. INPUT
|
Connect instrument using a |
|
1/4" audio jack cable |
|
5. OUTPUT |
5 |
Connect to input of amplifier |
|
or other audio devices using a |
|
1/4" audio jack cable |
6.SUB
Adjusts level of sub octave voice
7.UPPER
Adjusts level of upper octave voice
8.DRY
Adjusts level of original guitar signal when the effect is engaged
9.MODE
Selects the octave algorithm
FAT- Big booming sub voice and a soft rounded upper voice
TIGHT- Tight focused sub voice and a sharp bitey upper voice
SWELL- The upper and sub voices have a soft attack and gradually increase in volume whilst the dry signal remains untouched
MODES
The Tender Octaver MKII is armed with 3 brand new algorithms in the form of 3 different modes, and a true analog dry-thru signal to ensure your original guitar tone remains completely true.
FAT mode contains a huge bassy sub octave that can shake the walls and a soft toned upper voicing, for a very natural feeling upper octave shimmer. Fat riffs and simulated bass guitar really shine in this mode.
TIGHT mode has a more focused sub octave with a higher, low eq cut off point and a sharper upper octave bite. Shredders, fusion players and organ hunters alike, will find sonic delight when flipping the switch into tight mode.
SWELL mode engages automatic volume swelling of the harmony voices, providing a soft attack and lush release whilst the original dry signal remains completely untouched. Great for emulating a 12-string guitar or creating ambient chords and sound scapes.
Thanks to it’s all analog dry through signal and ultra-low latency tracking,
the Tender Octave MkII is lightning fast and will completely retain your original dry signal.
Input: 1/4” monaural jack (impedance: 2.2Meg Ohms)
Output: 1/4” monaural jack (impedance: 560 Ohms)
Power Requirements: AC adapter 9V DC (center minus plug), recommended to use Mooer Micro Power
Current Draw: 150 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 160g
* Disclaimer: Any specification’s update won't be amended in this manual.
Part No:620010340