MOOER ShimVerb User Manual
Digital Reverb Pedal
Precautions
Pow er Su ppl y
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center
minus. The ma xim um wo rki ng vo lta ge sh all n ot ex cee d 12V, otherwise may be
dangerous equipment damage, fire or other problems.
Unplug the AC power adapter when not using or during electrical storms.
Con nec tions
Always turn off th e pow er of t his a nd al l oth er eq uip men t bef ore c onn ect ing o r
disconnecting, this will help prevent malfunction and / or damage to other devices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
Cle aning
Clean only with a soft, dry cloth. If necessary, sli ght ly mo ist en th e clo th.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solve nts ,
cleaning fluids, or chemical-impregnated wiping cloths.
Int erf erence with othe r electrical devices
Radios and televisions placed nearby may experience reception interferen ce.
Ope rate this unit at a suitable distance from radios and televisions.
Loc ati on
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
Direct sunlight
Magnetic fields
Exc essive dusty or dirty location
Str ong vibrations or shocks
FCC c ertification
Thi s device complies with Part 15 of the FCC Rules. Operation is subject
to th e fol lowing two conditions:
T his d evi ce ma y not c aus e har mfu l int erf ere nce .
This devi ce must accept any int erfere nce receiv ed, includ ing interf erence
tha t may c ause undesired operation.
PLE ASE READ CAREFULLY BEFORE PROCEEDING
Heat sources
Ext reme temperature or humidity
High humidity or moisture
Main Features
3 Reverb Modes: Room, Spring, Shimmer
Full metal shell
Very small and compact design
True bypass switch
DC 9V adapter power supply
Room: Different sized true acoustics reverb, from room to hall.
Spring: Simulates a classic spring reverberation, vintage 60’s Surfing sound.
Shimmer: Add rich overtone into the reverb sound, spacy, smooth and
shining, very popular in Post Rock music.
1. TRUE BYPASS Footswitch:
3
Push down the footswitch to toggle
6
7
5
7. LEVEL Knob: Adjusts the level of the reverb sound.
8. COLOR Knob: Adjusts the tone of the reverb sound in Room mode;
Adjusts the volume of particular spring effects in Spring mode;
Adjusts the brightness of overtone in Shimmer mode.
between on and bypass status.
8
2. ON/OFF LED:
Shows the on/off status of
ShimVerb, when the LED
9
is lit the effect is engaged.
3. DC IN Power Jack:
4
For power supply, use a 9-volt
DC regulated AC adapter (plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4” mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4” mono audio jack, outputs
the signal.
6. Mode Switch:
Switch between Room mode, Spring
mode and Shimmer mode.
9. DECAY Knob: Adjusts the decay time of the reverb sound.
Reverb Modes: 3 (Room, Spring, Shimmer)
Input: 1/4” monaural jack (impedance: 470k Ohms)
Output: 1/4” monaural jack (impedance: 100 Ohms)
Power R equir ement s: AC a dapte r 9V DC (ce nter mi nus p lug),
recom mende d to use Mo oer M icro Po wer
Current Draw: 128 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 170g
Accessories: Owner’s Manual
* Disclaimer: Any specification’s update won't be amended in this manual.
Loading...