Mooer SD50A User manual

ACOUSTIC AMPLIFIER

Owner'sManual

CONTENTS

Precautions	01
Main Feature	02
Top Panel	02-04
BackPanel	04
Quick Tour	05
Setup	05-06
Preset Editing	06-07
TapTempo	08
Tuner	08-09
JAMmode(Looper&DrumMachine)	09-11
Anti-Feedback	11
AUX IN & Bluetooth	12
Wireless Footswitch	12-13
Factory Setting	13
Specifications	14

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Power Supply

PleaseconnecttheDCPOWERSupplytoanACoutletofthecorrectvoltage. PleasebesuretouseonlyanACadapterwhichsupplies15VDC, , centernegative. UnplugtheACpoweradapterwhennotinuseorduring electricalstorms.

Connections

Always turn off the power of this and all other equipment before connecting

or disconnecting, this will help prevent malfunction and / or damage to other

devices. Also make sure to disconnect all connection cables and the power

cord before moving this unit.

Cleaning

Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax,solvents, cleaning fluids, or chemical-impregnated wiping cloths.

Interference with other electrical devices

Radios and televisions placed nearby may experience reception interference.

Operate this unit at a suitable distance from radios and televisions.

Location

To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions:

Direct sunlight Heat sources

Magnetic fields Extreme temperature or humidity

Excessive dusty or dirty location High humidity or moisture

Strong vibrations or shocks

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

that may cause undesired operation.

Main Feature

● Bluetooth 4.0 support and auxiliary audio input for audio playback

● OTG support for smartphone and tablet recording

● Dual-channel preamp: Guitar input & Microphone/Guitar input

● One 8-inch FRFR(full range,flat response )speaker, One 1-inch treble

speaker

● High-precision tuner

● Individual digital EQ/Chorus/Delay/Reverb effects

● Double XLR balanced output mode: D.I, direct output; PRE, preamp

and effect output to Mixer

● 150-second looper with support for instrument and microphone

● Drum machine with 16 different grooves

● Wireless footswitch support

Top Panel

CHANNEL.1

01 GTR6.35mm (1/4”) guitar input

02 PHASEPhaser effect

03 GAINGuitar preamp gain

04 BASSBass frequency adjustment

05 MIDMiddle frequency adjustment

06 TREBLETreble frequency adjustment

EFFECT.1

08 CHORUSChorus effect control

DELAYDelay effect control

11 REVERBReverb effect control

CHANNEL.2

12MIC/GTRMicrophone/Guitar input

1348V48V phantom power switch

GAINMicrophone/guitar preamp gain adjustment

BASS : Bass frequency adjustment

16MID : Middle frequency adjustment

TREMBLE : Treble frequency adjustment

EFFECT.2

19CHORUS : Chorus effect control

20DELAY : Delay effect control

21REVERB : Reverb effect control

ANTI-FB

07ANTI-FB.1 : Feedback control of Channel 1

18ANTI-FB.2 : Feedback control of Channel 2

TAP TEMPO

10 R-TAP.1/G-TAP.2 : LED Button - switch between RED and GREEN mode

RED mode: R-TAP.1(Control the EFFECT.1, DELAY)

GREEN mode: G-TAP.2(Control EFFECT.2 DELAY)

LOOPER & DRUM

BEATS : Rhythm type switch of drum machine

DRUM : On/off of drum machine

24 VALUE : Editor knob. Rotate and press to make a decision

25 LOOPER : LOOPER function control

26 Screen display

27 MASTER : Master volume level control

Back Panel

01 POWER : Power Switch

02 DC IN

03 BLUETOOTH : Turn On/Off Bluetooth

04 AUX IN : Auxiliary audio input for 1/8'' stereo jack cable

05OTG : MICRO USB port to connect compatible smartphone or tablet

for direct recording.

06USB : Type B USB port. Connect a USB cable to a PC computer for

firmware update.

07 XLR OUT : XLR balanced output

08 LIFT/GND : Grounding switch of XLR output

09 D.I/PRE : XLR output mode switch

+ 11 hidden pages