Mooer S10 User manual

Rechargeable professional Battery pedalboard power supply

Precautions

Please Read Carefully Before Proceeding

Connections

Always turn o the power and all other equipment before connecting or disconnecting. This will help prevent malfunction and damage to any of the devices. Make sure to unplug all connection cables and power cords before moving this unit.

To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions

Direct sunlight

Heat sources

Magnetic ﬁelds

Extreme temperature or humidity

Excessively dusty or dirty location

High humidity or moisture

Strong vibration or shock

Interference with other electrical devices and Cleaning

Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.

Clean only with a soft, dry cloth.

Handling

Do not apply excessive force to the switches or controls. Do not let paper, metal, or other objects into this unit.

Take care not to drop the unit, and do not subject it to shock or excessive pressure.

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

Introduction

Mooer Power Bank S10 is a professional pedal board power supply loaded with a high capacity, rechargeable lithium battery. Now you can take your pedal board anywhere without the need for an electrical outlet and have the cleanest, most pure and noise free power possible.

Main Features

10 power outputs: 7 x 9V / 1 x 12V / 1 x 15V / 1 x 18V 2A total maximum output

20000mAh capacity

High quality, long life Lipo power cells (can be recycled more than 50,000 times)

Overcurrent protection

Supplied with special adapter for charging

Charging Procedure

Ensure that the S10 power bank's power switch is in the o position Connect the included A/C charging adapter to the power input on the S10

Connect it to the A/C outlet

The power charging light will illuminate red to indicate that the battery is charging and the LED display will ﬂash and show the current capacity state of the battery. When the battery is fully charged the LED display will stop ﬂashing and show 100. You can now disconnect the charging adapter.

Specifications

Power input: 25.2V, 2A centre pin negative

Power output: 7 x 9V / 1 x 12V / 1 x 15V / 1 x 18V

Operating current: 2A total maximum output

size:135mm(D)X75mm(W)X45.6mm (H)

weight:758g

Accessories: power adapter, power cable, user manual

*Notes Any speciﬁcation’s update will not be amended in this manual.

MOOER AUDIO CO.,LTD

www.mooeraudio.com

Part No:620010619