Page 1
Digital Delay Pedal
Precautions
Pow er Su ppl y
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center
minus. The ma xim um wo rki ng vo lta ge sh all n ot ex cee d 12V, otherwi se ma y be
dangerous equipment damage, fire or other problems.
Unplug the AC power adapter when not using or during electrical storms.
Con nec tio ns
Always turn off th e pow er of t his a nd al l oth er eq uip men t bef ore c onn ect ing o r
disconnecting, this will help prevent malfunction and / or damage to other de vic es.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
Cle aning
Clean only with a soft, dry cloth. If necessary, sli ght ly mo ist en th e clo th.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solve nts ,
cleaning fluids, or chemical-impregnated wiping cloths.
Int erf erence with othe r electrical devices
Radios and televisions placed nearby may experience reception i nte rfe ren ce.
Ope rate this unit at a suitable distance from radios and televisions.
Loc ation
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
Direct sunlight
Magnetic fields
Exc essive dusty or dirty location
Str ong vibrations or shocks
FCC c ertification
Thi s device complies with Part 15 of the FCC Rules. Operation is subject
to th e fol lowing two conditions:
T his d evi ce ma y not c aus e har mfu l int erf ere nce .
This devi ce must accept any int erfere nce receiv ed, includ ing interf erence
tha t may c ause undesired operation.
PLE ASE READ CAREFULLY BEFORE PROCEEDING
Heat sources
Ext reme temperature or humidity
High humidity or moisture
Main Features
3 Delay Modes: Analog/Real Echo/Tape Echo
Full metal shell
Very small and compact design
True bypass switch
DC 9V adapter power supply
Analog: Simulates a warm and smooth echo sound created by classic analog
delay equipment.
Real Echo: Simulates a natural echo sound in real environment.
Tape Echo: Simulates the sweet and spacy echo sound from a vintage tape
echo machine.
3
1. TRUE BYPASS Footswitch:
Push down the footswitch to toggle
6
between on and bypass status.
87
2. ON/OFF LED:
Shows the on/off status of
REECHO , when the LED
9
5
7. E.LEVEL Knob: Adjusts the level of delay effects.
8. F.BACK Knob: Adjusts the feedback of delay effects.
9. TIME Knob: Adjusts the delay time.
Delay Modes: 3 (Analog, Real Echo, Tape Echo)
Delay Time: 5ms-780ms
is lit the effect is engaged.
3. DC IN Power Jack:
4
For power supply, use a 9-volt
DC regulated AC adapter (plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4” mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4” mono audio jack, outputs
the signal.
6. Mode Switch:
Switch between Analog mode, Real
Echo mode and Tape Echo mode.
Input: 1/4” monaural jack (impedance: 470k Ohms)
Output: 1/4” monaural jack (impedance: 100 Ohms)
Power R equir ement s: AC a dapte r 9V DC (ce nter mi nus p lug),
recom mende d to use Mo oer M icro Po wer
Current Draw: 128 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 160g
Accessories: Owner’s Manual
* Disclaimer: Any specification’s update won't be amended in this manual.
Loading...