Mooer Modverb Owner`s Manual [en, zh]

ModVerb

Modulation Reverb Pedal

Precautions

PLEASE READ CAREFULLY BEFORE PROCEEDING

Power Supply

Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 9V DC,,center negative. Please do not use an AC adapter which supplies more than 9V DC.

Unplug the AC power adapter when not in use or during electrical storms.

Connections

Always turn off the power and all other equipment before connecting or disconnecting. This will help prevent malfunction and damage to any of the devices. Make sure to unplug all connection cables and power cords before moving this unit. To avoid deformation, discoloration, or other serious damage,

do not expose this unit to the following conditions:

Direct sunlight	Heat sources
Magnetic fields	Extreme temperature or humidity
Excessively dusty or dirty location	High humidity or moisture
Strong vibration or shock

Interference with other electrical devices and Cleaning

Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions.

Clean only with a soft, dry cloth.

Handling

Do not apply excessive force to the switches or controls. Do not let paper, metal, or other objects into this unit.

Take care not to drop the unit, and do not subject it to shock or excessive pressure.

FCC certification

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

Main Features

High quality reverb with 3 modulation types:Flanger, Vibrato, Phaser

DEPTH, DECAY, and MIX controls.

Tap tempo functionality

Frozen functionality

Small and compact size

True bypass

Pedal layout

7

	DC IN	Flanger
5		Vibrato
		Phaser
4
DEPTH	MIX	DECAY

3

6

8

1.True bypass footswitch:

Engages and disengages the effect Hold the footswitch to activate Freeze effect.

2.On/Off Led:

Displays the on/off status of the pedal. Controls tap tempo. Tap the LED 2 or more times to synchronize the modulation rate to your desired tempo.

			3.Mix control:
			Adjusts the reverb and modulation
9	M	2	effect mix.
	o		4.DEPTH
	d
	V
	e		Adjusts the depth of the modulation.
	b
	r		5. Toggle switch
			Selects between Flanger,
		1	Vibrato and Phaser modulation effects.
			6. DECAY

Adjusts the decay of the reverb effect.

7. DC in power jack: Input for power supply, use a 9V DC regulated power supply , ,160mA,center pin negative.

8.Input jack : 1/4” audio jack for connecting to the input device or instrument.

9.Output jack : 1/4” audio jack, effect output for connection to amp or other devices.

Modes:High quality reverb, 3 kinds of modulation effect with tap tempo and frozen functionality.

Input:1/4” mono audio jack. Impedance: 470k Ohms

Output:1/4” mono audio jack Impedance: 100 Ohms

Power requirements: AC adapter 9V DC , center negative. Highly recommend to use Mooer Micro Power.

Current Draw:160mA

Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)

Weight:146g

Accessories:Owner’s Manual

*Notes Any specification’s update will not be amended in this manual.

Part No:620010601

ModVerb

9V ±10%

•	•
•	•
•	•
•

FLANGER VIBRATO Phaser

DEPTH, DECAY MIX

LED TAP TEMPO

feedback

MINI 9V

7

DC IN	Flanger
5	Vibrato
	Phaser

4		6
	DEPTH MIX	DECAY
3		8
9	M	2
	od
	V
	e
	r
	b
		1

1.TRUE BYPASS :feedback

2.LED LEDTAP TEMPO

3.MIX

4.DEPTH 5.

FLANGER VIBRATO PHASER

6.DECAY 7.DC9V 9V

160mA

8.INPUT 1/4”

9.OUTPUT 1/4”

1 9V 160mA

2 ModVerb INPUT OUTPUT 3

TAP TEMPO

1/4” 470k Ohms1/4” 100 Ohms

9V Mooer Micro Power160mA

93.5mm(D) x 42mm(W) x 52mm(H)146g

*

Part No:620010601