Precautions
Power Supply
Use the correct AC outlet to connect the power adapter. Use a power transformer with a negative external voltage
of 9V (± 10%) ≥300mA, otherwise it will cause equipment damage, fire or other problems. When unused or thunderstorms please unplug
the power supply.
Connections
Before connecting the device or disconnecting it, be sure to turn off the power and other equipment, which will help to avoid malfunction and damage to other
DUAL ENGINE MODULATION PEDAL
equipment. Also, make sure that all cables and power cords are disconnected before moving the unit.
Place the place
To prevent deformation, discoloration, and other serious damage, avoid the following:
Direct sunlight |
Near heat source |
Magnetic field |
High temperature and humidity |
Dusty or unclean place |
Humidity is large |
Strongly vibrating or shakin |
|
Electrical interference
When using the unit, the radio and the TV may cause interference.
Use the unit away from the radio and the TV.
Clean
Please use a dry, soft cloth to clean the unit. If necessary, wipe with a slightly moist cloth. Do not use rough clean powder, alcohol, paint thinner, wax, solvent, detergent and chemical agents such as impregnated wipes.
Operating
Do not use brutal forces to use switches and control elements.
Do not allow paper, metal, and other objects to fall into the machine.
Be careful not to fall, do not subject it to shock and excessive pressure.
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
that may cause undesired operation.
Main Features
2 Independent processing modules containing a total of 16 modulation effects
Adjustable signal chain routing
Store and recall up to 4 user presets
Tap Tempo functionality
Expression pedal expandability
Leslie style ACCELERATION pedal True stereo outputs
Pedal Layout
|
A.SPEED |
A.DEPTH |
A.CONTROL |
B.SPEED |
B.DEPTH |
B.CONTROL |
|
|
|
|
|
|
Auto-wah |
11 |
|
|
|
|
|
|
|
|
|
|
|
|
A B |
|
|
|
10 |
|
|
|
B A |
|
|
|
|
|
|
Step-ph |
|
|
|
Vibrato |
|
|
|
|
|
|
|
||
8 |
|
|
|
|
|
|
9 |
|
|
|
|
|
|
|
12 |
13 |
|
|
TAP |
|
|
|
14 |
Hold for |
|
|
|
|
Hold for |
||
|
TAP |
|
|
|
|
ACCEL |
|
15 |
|
|
|
|
|
|
16 |
|
PRESET |
|
|
ON/OFF |
|
1 A.SPEED
Adjusts the rate of MODE A
2 A.DEPTH
Adjusts the depth/mix of MODE A
3 A.CONTROL
Adjusts various effect parameters of MODE A
4 B.SPEED
Adjusts the rate of MODE B
5 B.DEPTH
Adjusts the depth/mix of MODE B
6 B.CONTROL
Adjusts various effect parameters of MODE B
7 MODE A
Selects the effect type for MODE A
8 ROUTING SWITCH
Selects the internal signal chain routing (see ROUTING section of this manual)
9 STORE
Used for saving presets (see USING PRESETS section of this manual)
10 MODE B
Selects the effect type for MODE B
11 PRESET STATUS LED
Displays the currently selected Preset
12 TAP TEMPO LED
This LED will illuminate red when the PRESET FOOTSWITCH is controlling TAP TEMPO
13 EFFECT SPEED LED
Displays the current speed of the modulation rate
14 ON/OFF LED
Displays the ON/OFF status of the pedal
15 PRESET
Press this footswitch to scroll through presets
Press and hold this footswitch to activate/deactivate tap tempo
When tap tempo is activated, press this footswitch multiple times to control the speed of the modulation rate
16 ON/OFF
Press this footswitch to turn the pedal on/off
Press and hold this footswitch to activate effect acceleration
INPUT |
EXP |
|
|
DC 9V 300mA |
|
|
|
|
|
21 |
20 |
19 |
18 |
17 |
17 DC IN
Connect to a 9VDC power source
18 RIGHT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Right Channel. When used in MONO this output provides DSP BYPASS
19 LEFT OUTPUT
Connect to the input of your amplifier using a standard 1/4” jack cable
When used in stereo this output provides the Left Channel. When used in MONO this output provides TRUE BYPASS
20 EXP
Connect to an external expression pedal using a 1/4” TRS stereo jack cable
21 INPUT
Connect to the output of your instrument using a standard 1/4” jack cable
Routing
MOD FACTORY PRO contains 2 independent Modulation modules (MODE A/MODE B) which can operate individually or simultaneously. The internal signal chain routing of the pedal can be adjusted using the ROUTING SWITCH.
1.Serial MODE A > MODE B
The signal will first go to MODE A and then to MODE B
When using this routing the TAP TEMPO controls the rate of MODE A
AB
2.Serial MODE B > MODE A
The signal will first go to MODE A and then to MODE B
When using this routing the TAP TEMPO controls the rate of MODE B
BA
3. PARRALLEL
The signal will first be split into 2 and then go to MODE A and MODE B simultaneously
The signal will then exit both effect modules and be mixed together before reaching the outputs of the pedal
When using Parrallel routing you can simulate a dry through WET/DRY setup by disabling one of the effect modules. To achieve this simply set either MODE A or MODE B to the ‘Off’ position.
Try setting MODE A to ‘Off’ and ‘MODE B’ to Vibrato whilst in PARRALLEL routing to discover a very cool chorus type effect.
MODE A Off |
MODE B Off |
Using Presets
MOD FACTORY PRO can store 4 presets which can be scrolled through live using the PRESET footswitch. When you save a preset the pedal will store all of your parameter value, routing and expression pedal settings.
The PRESET STATUS LEDs display which preset is currently selected. When the RED LED is highlighted (on the far left) MOD FACTORY PRO is in pedal mode. This means that all parameter values will be equal to their respective controls physical position.
A.SPEED |
A.DEPTH A.CONTROL B.SPEED |
B.DEPTH B.CONTROL |
To scroll through presets, press and release the PRESET footswitch
To store a preset
Make all settings you wish to save
Press the STORE button once and the preset LED will begin to flash
Select the preset space where you wish to store your settings by pressing the PRESET footswitch
Press the STORE button one more time to confirm or move any control on the pedal to cancel the storage procedure
Connections
INPUT |
EXP |
|
DC 9V 300mA |
Expression Pedal
Expand the live performance experience of your MOD FACTORY PRO by using it with an expression pedal. The expression pedal can be set to control any one single parameter of the MOD FACTORY PRO.
Connect your expression pedal to the EXP input of the MOD FACTORY PRO using a 1/4” trs stereo Jack cable.
Simultaneously rotate the control knob of the parameter you wish to set to the EXP and rock the pedestal of your expression pedal back and forth
Now you have successfully set the expression pedal to control a parameter of the MOD FACTORY PRO
Specifications
Input: 1/4 "mono jack (impedance 1M Ohms)
Output: 1/4 "mono jack x2 (impedance 100 Ohms)
Sampling rate: 44.1K
Sampling accuracy: 24bit
Power supply: 9V 300mA DC power supply (centre pin negative)
Power consumption: 250mA
Size: 106mm (D) X96mm (W) X53mm (H)
Weight: 400g
* Disclaimer: Specification update is subject to change without notice.
MOOER AUDIO CO.,LTD
www.mooeraudio.com
Part No:620010640