Monster 191323 User Manual

Product Overview

Please read these safety instructions carefully to ensure
your personal and property safety.

1

• Speaker

• USB cable

• Lanyard

• QSG & Warranty Letter

• Noel’s letter

1. Lanyard

2.

3.5mm audio line in (AUX in)
Reset Button

3.

4. Charge in

7652 3 4

5.6.Microphone
LED indicator
(power on/pairing/battery low and charging status indicator)

7. Multi Function Button (MFB)
(pairing, phone call answer/end/reject, music play/pause)

Precautions

• Do not drop, disassemble, deform, modify or insert any objects into this product
as operating damage may result.

• Do not attempt to repair, modify or disassemble the product yourself. This
product does not contain any user-serviceable components and may void the
warranty.

• Do not clean the product with alcohol, ammonia based cleaners and
abrasive cleaners.

• Do not place this product on slanted surfaces as well as the edge of high
surfaces, like shelves, during music play to prevent accidental falling.

• Do not bring your product in to contact with any sharp objects as this may cause
scratches and operating damage.

• Do not attempt to replace the product battery, it is built-in and is not
user changeable.

• Observe all signs and displays that require an electrical device or RF radio

• Dispose of the product and the product’s battery in accordance with local laws
and regulations.

• Do not dispose of the battery with regular household waste.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates use and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

Guide to Indicator Lights

CONDITION/MODE

Power On

Bluetooth pairing mode
Connected
Charging
Battery Low

• Power On mode, press and hold the MFB for about 2 seconds to power on the speaker, you hear the opening tone.
To Power off the speaker, press and hold the MFB for about 2 seconds again, you hear “Goodbye”.

DESCRIPTION

Blue LED stays On

Blue LED On
Blue LED stays On, LED Off after charging
Red LED

TONE/VOICE PROMPTS

Opening tone
“Goodbye”
“Discovering”
“We are connected”
“Charging”
Battery low warning tone

Power/Charging

Before using the speaker, you need to charge the battery and pair the speaker with a compatible device.
The package includes a Micro USB cable that can be connected to your computer or other device made for USB charging.
You can use a standard USB compatible charging device, or you can plug the USB cable directly into a laptop or PC.
Caution: use 500mA or up, 5V DC output only power adapter.

Bluetooth pairing

In Power Off mode, press and hold the MFB for about 5 seconds until LED indicator ashes blue and red alternately, you hear “Discovering”. Now the device is in
pairing mode. When you unbox the speaker and power it on for the rst time, it will enter to pairing mode automatically.

2. Activate Bluetooth® on your phone and set it to search for new devices.

Reset Device

There may be a malfunction, press the Reset Button to reset the speaker.

the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

FCC Notice

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that
may cause undesired operation.

FCC Caution

for compliance could void the user‘s authority to operate this equipment.

• This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.

Industry Canada (IC) Compliance Notice

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device. Under Industry Canada
regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.

Play/Pause

You can play and pause your music using the MFB . To perform this function short press the button. Some phones may require you to start a media player rst.

Call

Answer a Call: Press the MFB once.
Reject a Call: Press and hold the MFB for about 2 seconds.
End a Call: Press the MFB once.

SCAN FOR FULL MANUAL • SCAN POUR MANUEL COMPLET

http://www.monsterproducts.com/support/product-manuals

Manual and Warranty · Manuel et Garantie