Ver 1.2
RYDIS Hybrid
Robot Vacuum Cleaner
User Manual
Learn more about
user manual at Moneualusa.com
RYDIS H68 Pro
Thank you for purchasing the Moneual RYDIS H68 Pro.
Before using the product, please read this User Manual carefully, and keep it for future reference.
Depending on your model, some contents of this User Manual may differ from the actual product.
The contents of this User Manual are subject to change without notice.
RYDIS Hybrid
Robot Vacuum Cleaner
User Manual
RYDIS H68 Pro
What do you want to clean?
The H68 Pro provides 3 basic cleaning mode (Hybrid Cleaning, Vacuum Cleaning and Mop Cleaning) in which you need to choose one. Hybrid Cleaning performs mop + vacuum at the same time. Vacuum Cleaning performs vacuum only.
Mop Cleaning performs mopping only. Depending on the user’s preference, you can choose among them to maximize the cleaning in your living environment.
Cleaning Type |
Function |
Moping, Hybrid Vacuuming Cleaning at the same
time
Vacuum Vacuuming
Cleaing Only
Mop
Mopping Only
Cleaning
For Where |
How to Select |
Operation Lamps |
|
|
|
Select Hybrid with the Mode |
|
|
|
|
|
|
|
|
Hard floor |
button on the Control Panel |
|
|
|
|
|
|
||
or press Hybrid button on |
|
|
|
|
|
|
|
|
|
|
remote control |
|
|
|
|
|
|
|
|
|
Select Vacuum with the Mode |
|
|
|
|
|
|
|
|
Hard floor and |
button on the Control Panel |
|
|
|
Carpet |
or press Vacuum button on |
|
|
|
|
remote control |
|
|
|
|
|
|
|
|
|
Select Mop with the Mode |
|
|
|
|
|
|
|
|
Hard floor |
button on the Control Panel |
|
|
|
or press Mop button on |
|
|
|
|
|
|
|
|
|
|
remote control |
|
|
|
|
|
|
|
|
Special Cleaning modes
CleaningMode |
Function |
For Where |
How to Select |
|
|
Intensive |
Clean in a 3 x 3 ft area |
Heavy Dust |
Select Intensive with the Mode button on |
|
|
Cleaning |
where the H68 Pro |
Particles or Heavy |
the Control Panel or press the Intensive |
|
|
mode |
located |
Traffic Area |
button on the remote control |
|
|
Shadow |
Clean in the hard to |
Under a bed or |
Select Shadow with the Mode button on |
|
|
Cleaning |
the Control Panel or press the Shadow |
|
|||
reach areas |
furniture |
|
|||
mode |
button on the remote control |
|
|||
|
|
|
|||
Manual |
Control the robot |
|
Press the Manual button on the remote |
|
|
vacuum cleaner |
Anywhere you |
|
|||
Cleaning |
control and press the Arrow button where |
|
|||
directly using the |
want to go |
|
|||
mode |
you want to go |
|
|||
remote control |
|
|
|||
|
|
|
|
||
Reservation |
Start cleaning after 1 |
Anywhere you |
Press the Reservation button and press |
|
|
Cleaning |
hour or at the same |
|
|||
want to go |
the Select button on the remote control |
|
|||
mode |
time every day |
|
|||
|
|
|
|||
Option |
Function |
For Where |
How to Select |
|
|
Turbo |
Start cleaning with |
Anywhere you |
Press the Turbo button on the |
|
|
Option |
turbo suction power |
want to go |
remote control |
|
|
Threshold |
Set to be able to climb |
Anywhere you |
Press the Threshold button on the |
|
|
over a threshold lower |
|
||||
Option |
want to go |
remote control |
0.4 inch |
||
than 0.4 inch (1 cm) |
|||||
|
|
|
(1 cm) |
||
Double |
Performs 2 cleaning |
|
|
|
|
Deep |
sessions of the vertical |
Anywhere you |
Press the Double CL button on the |
|
|
Cleaning |
pattern overlapped by |
want to go |
remote control |
|
|
Option |
the horizontal pattern. |
|
|
|
Features
Hybrid Cleaning
Full utilization of the 5-in-1(Twin Side Brush + Main Brush + BLDC Suction (vacuum) + Big Mop + H2O Tank) cleaning technology for spotless hard floors.
Mop Cleaning
Utilizing the attachable full sized mop, the Mop Cleaning mode is optimized for cleaning even the finest dusts that are harmful to your health.
Smart Vision Mapping
The Smart Vision Mapping Technology is capable of mapping out the surrounding area and accurately tracking its previous location to further cover the unclean areas.
Big Mop with H2O Tank
2 times bigger than the average mop, the reusable Big Mop is continuously moistened to clean your hard floors. The 5 oz (150 cc) reservoir H2O Tank can supply moisture to the Big Mop for up to 3 hours.
Double Deep Cleaning Option
Performs 2 cleaning sessions of the vertical pattern overlapped by the horizontal pattern.
Sweep Pattern
The back-and-forth motion cleans the floor three times in a straight line.
Starting
IStnartteinngsInitvenesivCe Clleeaanningi.n
g
Artificial Intelligence Voice Guidance
The RYDIS H68 Pro kindly speaks to you letting you know what he/she is doing, and lets you know when maintenance is required.
3.4 inch
(8.6 cm)
Various Cleaning Modes
The various cleaning modes provide different cleaning functions and levels of performance, which are optimized for the user environment.
Shadow Cleaning |
Intensive Cleaning |
Manual Cleaning |
Reservation Cleaning |
High Performance BLDC Motor
The cleaning performance is excellent due to the powerful BLDC (suction) motor. The BLDC motor is 30% more powerful than a DC motor, and the lifetime is approximately 10 times as long (estimated: 5,000 hours).
3.4 inches (8.6 cm) Slim Design
With a slim design, the RYDIS H68 Pro is just 3.4 inches (8.6 cm) high, enabling it to clean under the bed and the sofa, where it is difficult to clean with a vacuum cleaner or by hand.
Eco-friendly Lithium Iron Phosphate Battery
The RYDIS H68 Pro uses an eco-friendly battery that does not contain any heavy metals or acids that are harmful to the human body. The Lithium Iron Phosphate Battery has a lifetime that is approximately three times longer (1,000 cycles) than the standard lithium-based or nickel-based batteries.
It provides higher levels of operational safety due to the high resistance to heat and explosion.
Auto Charging
After it is finished cleaning, the RYDIS H68 Pro automatically returns to the charging station and starts charging. When the battery is low during the cleaning, the battery indicator will be blinking rapidly and the RYDIS H68 Pro automatically returns to the charging station for charging. Once the charging is completed, it will return to the previous location where it left off.
Obstacle Avoidance and Fall Protection
The obstacle detection sensors in the bumper help the RYDIS H68 Pro avoid obstacles and walls. The cliff detection sensors in the bottom detect height differences and prevent it from falling down stairs.
Contents
Before Use |
What do you want to clean? |
02 |
|
Special Cleaning modes |
03 |
|
Features |
04 |
|
Safety Information |
07 |
|
What’s in the Box |
12 |
|
Overview |
13 |
Installing |
Installing the Charging Station |
16 |
|
Installing the Side Brushes |
17 |
|
InstallingtheBigMopwithH2OTank |
18 |
|
Big Mop Recommendation |
20 |
|
Wet/Dry Disposable Mop Pad |
|
|
Recommendation |
21 |
|
Remote Control |
22 |
|
Charging |
23 |
Product |
Before You Start |
25 |
Operation |
What do you want to clean? |
26 |
|
||
|
Hybrid Cleaning |
27 |
|
Vacuum Cleaning |
28 |
|
Mop Cleaning |
29 |
|
Special Cleaning modes |
30 |
|
Intensive Cleaning |
31 |
Maintenance
Customer
Support
Shadow Cleaning |
32 |
Manual Cleaning |
33 |
Reservation Cleaning (Scheduled Cleaning) |
34 |
Turbo Option |
35 |
Threshold Option |
36 |
Double Deep Cleaning Option |
37 |
Language Setting |
39 |
Cleaning the Dust Bin |
40 |
Cleaning the Dust Filter |
41 |
Cleaning Side Brushes, Wheels and |
|
Sensors |
42 |
Cleaning the Dust Inlet |
44 |
Using and Managing the Battery |
45 |
Voice Guidance |
48 |
Error Message Description |
50 |
Troubleshooting |
52 |
Specifications |
55 |
Moneual Robot Vacuum Cleaner |
|
Limited Warranty |
59 |
Before Use
Safety Information
Please read and follow the instructions in this manual to ensure your safety and the safe use of your RYDIS H68 Pro.
Safety symbols
In this manual, various Warnings, Cautions and Notes are provided to help you to avoid potential hazards that can hurt you and/or damage your RYDIS H68 Pro.
You may be seriously injured up to death if you do not follow these
Warninginstructions.
|
|
You may be injured or your RYDIS |
|
|
|
|
|
You should refer to this |
|
|
|
|
|
||||
|
|
H68 Pro may be damaged if you do |
|
|
|
|
|
note when using your |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
||||||
|
|
not follow this instruction. |
Note RYDIS H68 Pro. |
|||||
|
Caution |
|||||||
Before you use
Do not install or use the RYDIS H68 Pro in a place where it will be exposed to direct sunlight.
If the power adapter becomes overheated during charging it may cause a fire, short circuit, or electrical shock.
The RYDIS H68 Pro may become discolored and deformed.
Do not install the charging station on an inclined floor, and do not apply impact to the charging station.
The charging station may become damaged or broken.
Do not use the product in a room with an unattended child or an elderly person.
There is a risk that the child or elderly person may become frightened.
The RYDIS H68 Pro is not intended for use by children, or by persons with reduced physical, sensory or mental capabilities, unless they have given supervision or instruction concerning the use of the RYDIS H68 Pro by a person responsible for their safety.
This may cause injury or damage the RYDIS H68 Pro.
Before you use the RYDIS H68 Pro, remove any small objects, clothes, and fragile objects from the floor.
This may cause damage to the RYDIS H68 Pro and obstruct the movement of the RYDIS H68 Pro.
Make sure to remove fragile objects (glass, china, flowerpot, etc.).
Small cloths, power cords, belts, towels, pads, and telephone cords can become entangled in the wheels or brushes.
7
RYDIS H68 Pro
Install the charging station in a location that can be easily accessed by the RYDIS H68 Pro.
If you install the charging station in a corner or if there are many obstacles around the charging station, it may prevent the RYDIS H68 Pro from automatically charging.
Make sure that the charging station is always plugged into a power source.
If no power is supplied to the charging station, you will not be able to use the automatic charge function.
When you use
Remove objects (such as loose clothing, towels, cloths, belts, etc) scattered on the floor before cleaning. Keep objects away from brushes and wheels to prevent entanglement.
This may cause noise, reduce the suction power, and damage the RYDIS H68 Pro.
Do not use the power adaptor with another appliance.
This may cause damage to the appliance and fire by overheating.
Do not use or store the RYDIS H68 Pro near flammable materials (alcohol, gasoline, kerosene, thinner, etc.) or heating sources (cigarettes, candles, stove, etc.).
This may cause fire and damage to the RYDIS H68 Pro.
If you notice smoke or a burning smell coming from the RYDIS H68 Pro, immediately turn the system power switch off and contact our service center.
Do not stand or sit on the RYDIS H68 Pro.
Movement of the RYDIS H68 Pro may cause injury or the RYDIS H68 Pro may be damaged.
Do not use the RYDIS H68 Pro on a narrow high place such as a desk, table, etc.
The RYDIS H68 Pro may fall off which could cause injury or damage to the product.
Do not let the RYDIS H68 Pro pass over or sweep up oil, pet droppings, etc.
This may cause malfunction of the RYDIS H68 Pro and damage.
Oil or pet droppings on the wheels may cause stains in other places.
If the RYDIS H68 Pro sucks a plastic bag in while operating, immediately remove it.
If you run the RYDIS H68 Pro for a long time with the dust inlet covered with a plastic bag, the motor will overheat and the RYDIS H68 Pro will be damaged.
8
Before Use
Do not press strongly or impact the bumper.
This may cause damage to the bumper sensors and malfunction.
Do not use the RYDIS H68 Pro in a place where the temperature is too low or too high (lower than 23F (-5°C) and higher than 120F (49°C)).
This may cause damage to the product.
Do not use the RYDIS H68 Pro when the dust bin is filled up.
This may reduce the suction power.
Never use the RYDIS H68 Pro without the filters.
Doing so may cause a malfunction of the RYDIS H68 Pro.
Do not use the RYDIS H68 Pro in a place where the floor or wall is made of glass or mirrors.
The RYDIS H68 Pro detect obstacles by using an IR sensor, so it may not detect glass and mirrors as obstacle.
Do not use the RYDIS H68 Pro on a flooded floor, on stairs, on a table or shelf, in a warehouse, in a commercial building, or outdoors.
If you have dropped or given an impact to the RYDIS H68 Pro, contact our service center.
Electrical instructions
Please use the power source and socket with the correct Voltage and Ampere.
If you use a power source or socket that does not fit the power specifications, there is the risk of fire, electrical shock, and damage to the RYDIS H68 Pro.
Make sure the power cord is not bent or crushed by heavy objects.
A damaged power cord may cause a fire or electrical shock.
To repair or replace a damaged power cord, contact our qualified service center to ensure your safety.
When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.
Stress on the cable will damage the power cord, which may cause a fire or electrical shock.
9
RYDIS H68 Pro
Do not touch the plug or wall socket with wet hands.
Doing so may cause electric shock.
If you spill water into the RYDIS H68 Pro, unplug the power cord immediately.
Water can bring the risk of fire and electrical shock.
Immediately remove the power cord from the outlet and contact our service center.
Do not use charging stations other than the charging station that came with your RYDIS H68 Pro.
Overvoltage brings the risk of fire and electrical shock.
Do not install the charging station in a location that is damp or wet, dusty, or near water.
This may cause a fire or an electrical shock and damage to the unit.
Do not touch the terminal of the charging station with any metallic object (such as a clip, pin, etc.).
This creates the risk of fire and electrical shock.
If you do not plan to use the RYDIS H68 Pro for an extended period of time, turn off the system power switch at the rear.
The battery may be discharged if you leave it the system power switch on.
Others
To ensure safety, only a qualified service agent should repair or disassemble the product.
Any repairs done by unqualified personnel may damage the RYDIS H68 Pro and bring the risk of a fire and electrical shock.
Dispose of the battery properly.
If you throw the battery into a fire or expose it to direct sunlight, there is the risk of fire and explosion.
Dispose of your old batteries according to the local laws and regulations of your region.
Clean the obstacle and bottom sensors periodically.
If the sensor becomes covered by lint and dust, the RYDIS H68 Pro may malfunction.
Please use the specified filter.
Use of a different filter will void your warranty.
10
Before Use
Please clean the RYDIS H68 Pro after turning it off.
If you clean it when the power is on or it is operating, it may cause injury.
Clean the main brush, dust bin, dust filter, and dust inlet periodically.
If you use the RYDIS H68 Pro for a long time without cleaning it, there is the risk of malfunction and damage.
Copyright and instructions
Copyright © 2014 MONEUAL Inc. All rights reserved.
Published January 31, 2014
RYDIS is the trademarks or registered trademarks of MONEUAL Inc. in the Republic of Korea and/or other conutries.
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any form, without the prior written consent of MONEUAL.
Depending on the model and type of your appliance, some of the contents in this manual may differ from your actual
product.
MONEUAL Inc. assumes no responsibility for technical or editorial errors or omissions contained herein, nor for any incidental or consequential damages and failures of the appliance caused by not following the precautions and instructions.
MONEUAL Inc. assumes no responsibility for damages resulting from the use of the product that is not approved by the company.
11
RYDIS H68 Pro
What’s in the Box
Charging Station |
Power Adaptor |
Power Cord |
Remote Control |
||
|
|
|
|
|
(included two AAA |
|
|
|
|
|
batteries) |
|
|
Robot |
RYDIS |
Hybrid |
|
|
|
Vacuum |
|
||
|
|
|
Cleaner |
|
|
|
|
|
User Manual |
|
|
RYDIS H68 Pro |
|
|
|
|
|
(2800mA built-in battery) |
|
|
|
|
|
Side Brushes (1 set) |
Cleaning Brush |
User Manual |
Call Moneual Support Card |
||
|
|
Quick Start Guide |
|
||
Mop Kit
H68 Pro Big Mop with H2O Tank
1.H2O Tank
2.Big Mop (Reusable x 2)
The appearance and specifications may be changed without notice in order to improve functions or performance.
12
Before Use
Overview
RYDIS H68 Pro
Top |
3 |
1 |
|
|
2 |
4
5
Rear
7 |
8 |
9 |
6
|
10 |
11 |
|
|
|
Bottom |
|
|
14 |
12 |
|
13 |
13 |
|
10 |
|
10 |
12 |
|
12 |
|
|
15 |
16 |
|
|
1 Control Panel
2 Camera
3 Dust Bin Cover
4 Bumper
5Obstacle and Signal Detection Sensor
6 Air Outlet
7 Adaptor Jack
8 System Power Switch
9 Signal Receiving Sensor
10 Cliff Detection Sensors
11 Charging Terminals
12Wheels
13Side Brush Installation Pins
14Dust Inlet
15Main Brush
16Mop Pad Installation Holes
13
RYDIS H68 Pro
Big Mop with H2O Tank
1 |
2 |
1 H2O Tank
2 Big Mop (Reusable x 2)
Control Panel |
|
|
|
|
1 |
Start/Stop Button |
10 |
Reservation (Every Day) |
|
|
|
|
|
||||
|
|
|
|
|
2 |
Main Power Button |
|
Indicator |
10 |
|
9 |
8 |
7 |
|
Reservation (One Hour) |
||
|
3 |
Cleaning Mode Selection |
11 |
|||||
11 |
|
|
|
|
||||
|
|
|
|
|
Button |
|
Indicator |
|
12 |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
||
|
|
|
|
4 |
Vacuum Cleaning Indicator |
12 |
Double Deep Cleaning |
|
13 |
|
|
|
6 |
||||
14 |
|
|
|
5 |
5 |
Charging Indicator |
|
Option Indicator |
|
|
|
|
Threshold Option |
||||
15 |
|
|
|
4 |
6 |
Shadow Cleaning Indicator |
13 |
|
|
|
|
|
|
|
Indicator |
||
1 |
2 |
3 |
|
|
7 |
Intensive Cleaning |
|
|
|
|
14 |
Battery Level Indicator |
|||||
|
|
|
|
|
|
Indicator |
||
|
|
|
|
|
|
15 |
Turbo Option Indicator |
|
|
|
|
|
|
8 |
Hybrid Cleaning Indicator |
||
|
|
|
|
|
|
|
||
|
|
|
|
|
9 |
Mop Cleaning Indicator |
|
|
Charging Station
Front |
Back |
|
|
|
1 |
Power/Charging lamp |
|
|
|
|
2 |
Guide Signal Transmission Sensor |
|
1 |
|
|
3 |
Charging Terminals |
|
|
4 |
5 |
4 |
Adaptor Holder |
|
2 |
6 |
5 |
Adaptor Jack |
||
|
|||||
3 |
|
|
6 |
Signal Distance Selection Switch |
|
|
|
|
14
Before Use
Remote Control
You can conveniently access the various functions of the RYDIS H68 Pro with your remote control.
Functions that can be controlled through the remote control: Hybrid Cleaning, Vacuuming Cleaning, Mop Cleaning, Shadow Cleaning, Intensive Cleaning, Reservation Cleaning, Double Deep Cleaning Option, Turbo Option, Threshold Option, Charging.
|
1 |
2 |
3 |
4 |
5 |
|
|
7 |
6 |
8 |
9 |
11 |
12 |
14 |
13 |
|
|
10 |
1 Power Button
Press to turn the power on/off.
Press to return the RYDIS H68 Pro to operation mode when it has stopped due to failure.
2 Charging Button Press to move the RYDIS H68 Pro to the charging station.
3 Start/Stop Button
Press to start/stop the selected cleaning.
4 SELECT/MANUAL Button
Press to confirm your Reservation Cleaning selection.Press to start Manual Cleaning (see page 33).
5Direction Buttons Press to drive the RYDIS H68 Pro in Manual Cleaning. (forward, backward, left turn, and right turn.)
6 Hybrid Cleaning Button Press to start Hybrid Cleaning (see page 27). (Mop + Vacuum)
7 Vacuum Cleaning Button Press to start Vacuum Cleaning (see page 28). (Vacuum only)
8 Mop Cleaning Button Press to start Mop Cleaning (see page 29). (Mop only)
9 Shadow Cleaning Button Press to start Shadow Cleaning (see page 32).
10 Intensive Cleaning Button Press to start Intensive Cleaning (see page 31).
11 Double CL. Button Press to select Double Deep Cleaning Option (see page 37).
12 Turbo Option Button Press to select Turbo Option (see page 35).
13 Reservation Cleaning Button Press to set the Reservation Cleaning (see page 34).
14 Threshold Option Button Press to select Threshold Option (see page 36).
15
RYDIS H68 Pro
Installing the Charging Station
1Connect the power adaptor.
Set the RYDIS H68 Pro detection distance [16ft (5m) or 26ft (8m)].
Place the power adaptor inside of the charging station.
2Check the power connection and make sure blue lamp is on.
3Make sure the location of the charging station is an open area as illustrated.
Clear all obstacles in the area within 5ft (1.5m) in front, left, and right of the charging station
Install the charging station firmly against the wall.
5ft
(1.5m)
5ft 5ft (1.5m)
(1.5m)
If you install the RYDIS H68 Pro in a place where it will be exposed to direct sunlight, the heat of the sun may interfere with the auto charging, and the RYDIS H68 Pro may become discolored over time.
If you install the charging station near a rug or threshold area, the RYDIS H68 Pro may not be able to return to the charging station.
If your RYDIS H68 Pro can’t return to the charging station, reset the detection distance as recommended below.
In a narrow area, set it to16ft (5m), and in a wide area, set it to 26ft (8m).
If you set the detection distance to 26ft (8m) in a narrow area, the Auto Charging may be interfered with.
16
Installing
Installing the Side Brushes
Rear side
Check for the L mark under the side brush.
Check for the R mark under the side brush.
Front side
Align with the L mark under the RYDIS H68 Pro and install the L brush.
Align with the R mark under the RYDIS H68 Pro and install the R brush.
17
RYDIS H68 Pro
Installing the Big Mop with H2O Tank
We recommend moistening the Big Mop before attaching it for longer wet cleaning performance.
1 Supply water into the H2O Tank then attach |
2 Turn the system power switch |
the mop to it. |
off (on the rear side of the |
|
RYDIS H68 Pro). |
3Attach the H2O Tank.
Fit the joint parts to the holes of the RYDIS H68 Pro.
If you apply excessive force to the
H2O Tank when you install it on the RYDIS H68 Pro, the joint parts of the H2O Tank may be damaged.
|
18
Loading...