Monessen Hearth BLDV500 User Manual

PRODUCT SPECIFICATIONS

BLDV500 Direct Vent

34-1/4"

7-5/16"

17-9/16"

20-9/16"

41-1 /16"

GLASS VIEWING AREA

33”W x 25 13/16”H (858 Square Inches)

TECHNICAL INFORMATION

Max. Btu Input: 28,000 BTU/HR
Ignition System: Standing Pilot or Signature Command™System
Gas Type: Natural or LP
Flue Type: Simpson Dura-Vent, Selkirk Metalbestos, MetalFab
Termination: Top vent
Clearance to Flue for interior: 3" Top 1" Bottom and Sides
Clearance to Flue for Outside Wall: 1"
Clearance to Fireplace: 1"
Minimum Vent Height Before Elbow: 12”
CSA Design Certified

FIELD INSTALLED ACCESSORIES

Firebrick: Cottage Clay or Cottage Red
Options: Andirons, Mesh Glass Cover, Remote

Variable Thermostat Controlled Dual Forced
Air Blower (160 cfm): BLOTBLDV

Ambient Technologies™Remote Controls and Thermostats

40-7/8"

FRAMING

DIMENSION

40-5/8"

7-3/4"

31-7/8"

25-13/16"

3"

1"

40-5/8"

15/16"

11-3/8"

33"

35-15/16"

37-1/2"

FRAMING DIMENSIONS

2-9/16"

16-13/16"

MADE IN U.S.A.

HPBA

Hearth, Patio & Barbecue As sociation

A Brand of Monessen Hearth Systems Co.

149 Cleveland Drive, Paris, Kentucky 40361

48-5/8"

34-1/4"

41-7/16"

68-3/4"

34-3/8"

17-9/16"

www.monessenhearth.com

To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable
building or fire codes. Contact local building or fire officials about restrictions and installation inspection requirements . All photographs and drawings on this brochure are for illustrative purposes only and are not intended
for, nor should they be used as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without notice. © 2007 Monessen Hearth Systems Co.