Page 1
Y3286BN – Towel Ring
Brushed Nickel Finish
Y3286CH – Towel Ring
Chrome Finish
25300 AL MOEN DRIVE NOR TH OLMSTED , OH 44070
COR PORATE H EADQU AR TER S: (800) 321 -8809 FAX: (800) 848 -6636
IN TERNATI ONAL: (440) 962-2000 FAX: (440) 962-2726
CU STOMER SER VIC E (U SA): 800-882-0116 F AX: (888) 379-2720
WW W.MOEN. COM
Copyright Creative Specialties International Literature # BA1600
Towel Ring post is die cast from
highest quality zinc alloy (Zamac).
Casting is plated in Chrome or
Brushed Nickel. Towel ring is
aluminum.
Cleaning Instructions:
1. Remove mounting plate from the product post by loosening each
setscrew.
2. Position the mounting plate on the wall at desired location with
“UP” facing you. Mark hole locations.
3. Drill 2 holes as marked using 5/16” drill bit.
4. Fold ends of the plastic toggle anchor together and insert into
each hole in the wall.
5. Lightly tap anchors until flush with the wall.
6. One at a time, insert plastic pin into each anchor and lightly tap to
activate anchor. Remove pin and repeat on other anchor.
7. Place the mounting plate on the wall over the installed wall
anchors with “UP” facing you.
8. Tighten screws.
9. Place decorative product over the mounting plate with the
setscrew facing down and tighten setscrew.
Stock Number:______________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
Y3286
Boardwalk Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Loading...