Moen 7565 Specs

6-15/16 "
(176mm)

15-5/8"

(397mm)

9-1/2"

(241mm)

4-13/16"
(122mm)

3-1/2"

(89mm)

2-1/2" (63mm)

Max Deck Thickness

3-1/2"

(89mm)

7/8"

(19mm)

1-1/16"
(27mm)

7-17/32"
(191mm)

2-1/16"
(52mm)

30-5/8"

(778mm)

FAUCET DESCRIPTION

• Reflex™ pulldown system offers smooth operation, easy movement
and secure docking

• Metal construction with various finishes identified by suffix

• Quick connect installation

• Pulldown spray with 68" braided hose

• Flexible supply lines with 3/8" compression fittings

• High arc spout provides height and reach to fill or clean large
pots while pulldown wand provides the maneuverability for cleaning
or rinsing

• 360˚ rotating spout provides ability to install handle on either side

• Faucet designed for handle to be mounted on right side

OPERATION

• Lever style handle

• Temperature controlled by 100˚ arc of handle travel

• Operates with less than 5 lbs. of force

• Operates in stream or spray mode in the pullout or retracted position

FLOW

• Flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge

STANDARDS

• Third party certified to IAPMO Green, ASME A112.18.1/CSA B125.1 and all
applicable requirements therein including NSF 61/9G

• Meets CalGreen and Georgia SB370 requirements

• Contains no more than 0.25% weighted average lead content

• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act

• The backflow protection system in the device consists of two independently
operating check valves, a primary and a secondary which prevent backflow

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser

• 5 year warranty if used in commercial installations

S p e c i f i c a t i o n s

ALIGN™

Single Handle High Arc

Pulldown Kitchen Faucet

Models: 7565 series

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED

THRU 1 HOLE, 1-1/2" (38mm) MIN. DIA..

(OPTIONAL 3-HOLE ESCUTCHEON 141002 AVAILABLE)

5/13

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com