Moen 7365, 7165 Specs

FAUCET DESCRIPTION

2-1/2" (63mm)

MAX DECK THICKNESS

9-5/8"

(244mm)

(203mm)

15-5/16" (389mm)

(51mm)

4-11/16" (119mm)

2-5/16"

(58mm)

1-1/4" (32mm)

THRU HOLE

6-15/16 " (176mm)

4-13/16" (122mm)

3-1/2"

(89mm)

3-1/2"

(89mm)

7/8"

(19mm)

1-1/16" (27mm)

2-1/16" (52mm)

30-5/8"

(778mm)

• Metal construction with various finishes identified by suffix

• High arc spout provides the height and reach to fill or clean large pots

• Flexible supply lines with 3/8" compression fittings

• 360˚ rotating spout

• Faucet designed for handle to be mounted on right side

OPERATION

• Single handle lever

• Temperature controlled by 100˚ arc of handle travel

FLOW

• Spout flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi

CARTRIDGE

• 1255™ Duralast™ cartridge for Single-Handle Faucets

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all

applicable requirements referenced therein including NSF 61/9G

• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

•

ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

S p e c i f i c a t i o n s

ALIGN™

Single Handle Single Hole Mount

High Arc Kitchen Faucet

Models: 7365 series

7165 series with spray

NOTE: 7165 FAUCET IS DESIGNED TO BE INSTALLED

THRU 2 HOLES, 1-1/2" (38mm) MIN. DIA. FOR VALVE, &

1-1/4" (32mm) MIN.DIA. HOLE FOR SIDE SPRAY

(OPTIONAL 3-HOLE ESCUTCHEON 141002 AVAILABLE)

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 1/14

TO ORDER PARTS CALL: 1-800-BUY-MOEN

www.moen.com