Moen 6610 User Manual

Specifications

BRANTFORD™

4" Lavatory Faucet

with Metal Waste Assembly

Models: 6610 series

Bulk Model: 66610

(Bulk packed 6 per carton)

50/50 Waste Assembly

NOTE: THIS FAUCET IS DESIGNED TO BE

INSTALLED THRU 3 HOLES, 1" MIN. DIA.

DESCRIPTION

• Metal construction with various finishes identified by suffix

• 1/2" IPS connections

• Includes metal pop-up waste assembly OPERATION

• Lever style handles

• Maximum handle(s) rotation angle is 90˚ to full on

• Rotate hot side counterclockwise to open (clockwise to close)

• Rotate cold side clockwise to open (counterclockwise to close) FLOW

• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to

2.2 gpm max (8.3 L/min)

CARTRIDGE

• 1224 cartridge design

• Nonmetallic and stainless steel material STANDARDS

• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,

ICC A117.1, and all applicable requirements referenced therein

• Certified to ANSI/NSF 61/9

• Complies with California Proposition 65 and with the Federal Safe

Drinking Water Act

•ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and

finish defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

Rev. 7/08

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

3-7/8"

(98mm)

(76mm)

(102mm)

(127mm)

3-1/4"

(83mm)

5-1/4"

(134mm)

2-1/2"

(64 mm)

3/4"

(20mm)

max.