Moen 4793 User Manual

11/4"

(32 mm)

Size

Sealant

or

INS2091- 1/12

HELPFUL TOOLS

For safety and ease of faucet replacement, Moen recommends the use of these helpful tools.

TWO-HANDLE ROMAN TUB VALVE

MODEL 4793

CAUTION — TIPS FOR REMOVAL OF OLD FAUCET

CAUTION — Always turn water supply OFF before removing existing faucet or disassembling the valve. Open faucet handle to

relieve water pressure and ensure that complete water shut-off has been accomplished.

The PEX fittings in these valves have been third party certified to U.S. and Canadian Standards using the following: Nibco® and U.S. Brass
QESTPEX® 1/2" Cu crimp rings and certified 1/2" PEX tubing. Crimps were made using Nibco® PEXlink® 1/2" crimp tool in accordance with
the Nibco® instructions.

Moen Lifetime Limited Warranty

Moen products have been manufactured under the highest standards of quality and
workmanship. Moen warrants to the original consumer purchaser for as long as the
original consumer purchaser owns their home (the “Warranty Period” for homeowners),
that this faucet will be leak- and drip-free during normal use and all parts and finishes
of this faucet will be free from defects in material and manufacturing workmanship. All
other purchasers (including purchasers for industrial, commercial and business use) are
warranted for a period of 5 years from the original date of purchase (the “Warranty
Period” for non-homeowners).

If this faucet should ever develop a leak or drip during the Warranty Period, Moen will
FREE OF CHARGE provide the parts necessary to put the faucet back in good working
condition and will replace FREE OF CHARGE any part or finish that proves defective in
material and manufac-turing workmanship, under normal installation, use and service.
Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-

6130), or by writing to the address shown. Proof of purchase (original sales receipt)
from the original consumer purchaser must accompany all warranty claims. Defects or
damage caused by the use of other than genuine Moen parts is not covered by this
warranty. This warranty is applicable only to faucets purchased after December, 1995
and shall be effective from the date of purchase as shown on purchaser’s receipt.

This warranty is extensive in that it covers replacement of all defective parts and
finishes. However, damage due to installation error, product abuse, product misuse, or
use of cleaners containing abrasives, alcohol or other organic solvents, whether
performed by a contractor, service company, or yourself, are excluded from this
warranty. Moen will not be responsible for labor charges and/or damage incurred in
installation, repair or replacement, nor for any indirect, incidental or consequential
damages, losses, injury or costs of any nature relating to this faucet. Except as provided
by law, this warranty is in lieu of and excludes all other warranties, conditions and
guarantees, whether expressed or implied, statutory or otherwise, including without
restriction those of merchantability or of fitness for use.

Some states, provinces and nations do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state, province to province, nation to nation. Moen will
advise you of the procedure to follow in making warranty claims. Simply write to Moen
Incorporated using the address below. Explain the defect and include proof of
purchase and your name, address, area code and telephone number.

HELP LINE

Please do not return this product to the store.

If you need installation assistance, replacement parts or have questions
regarding our warranty, please call our Product Consultants at:

U.S.: 1-800-289-6636

Monday - Friday 8:00 a.m. to 8:00 p.m. EST
Saturday 8:00 a.m. to 6:30 p.m. EST

Or e-mail us at: [e-mail]
Be sure to visit our website at www.moen.com

Canada 1-800-465-6130

Monday - Friday 7:30 a.m. to 5:00 p.m. EST
Or e-mail us at: [e-mail]
Be sure to visit our website at www.moen.ca

STOP

A

A. Protective Cap (2x)
B. Test Plug
C. Protective Tube
D. Top Mounting Nut (3x)
E. Bracket, Valve (2x)
F. Bracket, Shank
G. Bushing, Tapered (3x)
H. Nut (3x)
I. Valve Body Assembly, Cold
J. Adjustable Shank Assembly
K. Hose Assembly
L. CPVC Adapter (2x)
M. Clip, Quick Connect (5x)
N. Tool, Adjustable Shank
O. Valve Body Assembly, Hot
P. PEX Cold Expansion Adapters*

1) Drill holes for the valves and spout 5" minimum on
center. Position the spout hole so that spout delivers
the water to the desired place in the tub.

11

/4" x 3

(32mm)

2) Assemble nut (H), tapered bushing (G) and valve bracket
(E) onto valve assemblies (I & O). Assemble Nut (H), tapered
bushing (G) and shank bracket (F) onto shank assembly (J).

2

1

x2

B

X

C

(152mm)

x2

E

x3

D

F

G

x3

2⁄" MIN

(FOR ALL HOLES)

5"

(127mm)

(54mm)

J

x3

H

I

x2

L

O

"

)

5

(127mm

6"MAX

(SPOUT ONLY)

x2

E

N

x5

M

K

Cold expansion PEX adapters available separately.
Adaptadores PEX para expansión en frío disponibles

por separado.
Adaptateurs PEX de dilution

à froid oerts séparément.

P

140715

F

4

4

3

3

x3

H

1

1

2

4

x3

G

3

1

2

I

J

2

O